Construction of Thiazolo[5,4-d]thiazole-based Two-Dimensional Network for Efficient Photocatalytic CO2 Reduction

Review on Microreactors for Photo-Electrocatalysis Artificial Photosynthesis Regeneration of Coenzymes

In recent years, with the outbreak of the global energy crisis, renewable solar energy has become a focal point of research. However, the utilization efficiency of natural photosynthesis (NPS) is only about 1%. Inspired by NPS, artificial photosynthesis (APS) was developed and utilized in applications such as the regeneration of coenzymes. APS for coenzyme regeneration can overcome the problem of high energy consumption in comparison to electrocatalytic methods. Microreactors represent a promising technology. Compared with the conventional system, it has the advantages of a large specific surface area, the fast diffusion of small molecules, and high efficiency. Introducing microreactors can lead to more efficient, economical, and environmentally friendly coenzyme regeneration in artificial photosynthesis. This review begins with a brief introduction of APS and microreactors, and then summarizes research on traditional electrocatalytic coenzyme regeneration, as well as photocatalytic and photo-electrocatalysis coenzyme regeneration by APS, all based on microreactors, and compares them with the corresponding conventional system. Finally, it looks forward to the promising prospects of this technology.

2-Pyran-4-Ylidene Malononitrile Based Conjugated Microporous Polymers as Metal-Free Heterogeneous Photocatalysts for Organic Synthesis

Photoactive conjugated microporous polymers (CMPs) as heterogeneous photocatalysts provide a sustainable alternative to classical metal-based semiconductor photosensitizers. However, previously reported CMPs are typically synthesized through metal catalyzed coupling reactions, which bears product separation, but also increases the price of materials. Herein, a new type of sp2 carbon linked DCM-CMPs are successfully designed and synthesized by organic base catalyzed Knoevenagel reaction using 2,6-Dimethyl-4H-pyran-4-ylidene-malononitrile and aromatic polyaldehydes as monomers. The new polymers feature inherent porosity, excellent stability, and fully π-conjugated skeleton with broad visible-light absorption. They effectively induce the synthesis of benzimidazole compounds under light irradiation, and exhibit wide substrate adaptability with outstanding recyclability.

Artificial Photosynthesis for Regioselective Reduction of NAD(P)+ to NAD(P)H Using Water as an Electron and Proton Source

In photosynthesis, four electrons and four protons taken from water in photosystem II (PSII) are used to reduce NAD(P)+ to produce NAD(P)H in photosystem I (PSI), which is the most important reductant to reduce CO2. Despite extensive efforts to mimic photosynthesis, artificial photosynthesis to produce NAD(P)H using water electron and proton sources has yet to be achieved. Herein, we report the photocatalytic reduction of NAD(P)+ to NAD(P)H and its analogues in a molecular model of PSI, which is combined with water oxidation in a molecular model of PSII. Photoirradiation of a toluene/trifluoroethanol (TFE)/borate buffer aqueous solution of hydroquinone derivatives (X-QH2), 9-mesityl-10-methylacridinium ion, cobaloxime, and NAD(P)+ (PSI model) resulted in the quantitative and regioselective formation of NAD(P)H and p-benzoquinone derivatives (X-Q). X-Q was reduced to X-QH2, accompanied by the oxidation of water to dioxygen under the photoirradiation of a toluene/TFE/borate buffer aqueous solution of [(N4Py)FeII]2+ (PSII model). The PSI and PSII models were combined using two glass membranes and two liquid membranes to produce NAD(P)H using water as an electron and proton source with the turnover number (TON) of 54. To the best of our knowledge, this is the first time to achieve the stoichiometry of photosynthesis, photocatalytic reduction of NAD(P)+ by water to produce NAD(P)H and O2.

Artificial Photoenzymatic Reduction of Carbon Dioxide to Methanol by Using Electron Mediator and Co-factorAssembled ZnIn2 S4 Nanoflowers

Increased absorption of visible light, low electron-hole recombination, and fast electron transfer are the major objectives for highly effective photocatalysts in biocatalytic artificial photosynthetic systems. In this study, a polydopamine (PDA) layer containing electron mediator, [M], and NAD⁺ cofactor was assembled on the outer surface of ZnIn₂ S₄ nanoflower, and the as-prepared nanoparticle, ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ , was used for photoenzymatic methanol production from CO₂ . Because of effective capturing of visible light, reduced distance of electron transfer, and elimination of electron-holes recombination, a high NADH regeneration of 80.7±1.43 % could be obtained using the novel ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ . In the artificial photosynthesis system, a maximum methanol production of 116.7±11.8 μm was obtained. The enzymes and nanoparticles in the hybrid bio-photocatalysis system could be easily recovered using the ultrafiltration membrane at the bottom of the photoreactor. This is due to the successful immobilization of the small blocks including the electron mediator and cofactor on the surface of the photocatalyst. The ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ photocatalyst exhibited good stability and recyclability for methanol production. The novel concept presented in this study shows great promise for other sustainable chemical productions through artificial photoenzymatic catalysis.

Modulation of the Naked-Eye and Fluorescence Color of a Protonated Boron-Doped Thiazolothiazole by Anion-Dependent Hydrogen Bonding

The reaction of a cyclic alkyl(amino)carbene (CAAC)-stabilized thiazaborolo[5,4-d]thiazaborole (TzbTzb) with strong Brønsted acids, such as HCl, HOTf (Tf=O2 SCF3 ) and [H(OEt2 )2 ][BArF 4 ] (ArF =3,5-(CF3 )2 C6 H3 ), results in the protonation of both TzbTzb nitrogen atoms. In each case X-ray crystallographic data show coordination of the counteranions (Cl- , OTf- , BArF 4 - ) or solvent molecules (OEt2 ) to the doubly protonated fused heterocycle via hydrogen-bonding interactions, the strength of which strongly influences the 1 H NMR shift of the NH protons, enabling tuning of both the visible (yellow to red) and fluorescence (green to red) colors of these salts. DFT calculations reveal that the hydrogen bonding of the counteranion or solvent to the protonated nitrogen centers affects the intramolecular TzbTzb-to-CAAC charge transfer character involved in the S0 →S1 transition, ultimately enabling fine-tuning of their absorption and emission spectral features.

Enhancing Built-in Electric Field via Molecular Dipole Control in Conjugated Microporous Polymers for Boosting Charge Separation

The built-in electric field (BEF) has been considered as the key kinetic factor for facilitating efficient photoinduced carrier separation and migration of polymeric photocatalysts. Enhancing the BEF of the polymers could enable a directional migration of the photogenerated carriers to accelerate photogenerated charge separation and thus boost photocatalytic performances. However, achieving this approach remains a formidable challenge, which has never been realized in conjugated microporous polymers (CMPs). Herein, we developed a molecular dipole control strategy to modulate the BEF in CMPs by varying the nature of the core. As a result, a series of CMPs with a tunable BEF were designed and prepared via FeCl₃-mediated coupling of bicarbazole with different acceptor cores. The optimized CbzCMP-9 featured the strongest BEF induced by its high molecular dipole, which grants it with a powerful driving force to accelerate exciton dissociation into electron-hole pairs and facilitates charge transfer along the backbone of CMPs to the surface, resulting in a remarkable photocatalytic performance toward thiocyano chromones and C-3 thiocyanation of indoles (up to 95 and 98% yields, respectively) and prominently surpassing many other reported photocatalysts. In brief, the proposed strategy highlights that enhancing the BEF by modulating molecular dipole can lead to a dramatic improvement in photocatalytic performance, which is expected to be employed for constructing other photocatalytic systems with high performance.

Triazine-based two dimensional porous materials for visible light-mediated oxidation of sulfides to sulfoxides with O2

Recently, triazine-based two dimensional (2D) porous materials have received increasing attention in photocatalysis. Herein, CTF-1, a covalent triazine framework, was adopted as the blueprint for designing a 2D bespoke photocatalyst. The thiazolo[5,4-d]thiazole (TzTz) linkage was inserted into the framework of CTF-1, affording TzTz-TA, which belongs to conjugated microporous polymers (CMPs). Rather than the direct insertion via the challenging CH activation, TzTz-TA was assembled from 2,4,6-tris(4-formylphenyl)-1,3,5-triazine and dithiooxamide, in which TzTz was formed in situ by a process of catalyst-free solvothermal condensation. Both CTF-1 and TzTz-TA had similar energy gaps (E_g), photocurrents, and charge carrier lifetimes, in line with the similar molecular underpinnings. However, the reduction potential of TzTz-TA is less negative than that of CTF-1 due to the insertion of TzTz linkage, in a more appropriate position for activating O₂ to superoxide (O₂^•-). In return, blue light-mediated oxidation of sulfides to sulfoxides with O₂ over TzTz-TA was accomplished with significantly superior conversions to those over CTF-1. Intriguingly, extensive sulfides could be oxidized to corresponding sulfoxides with outstanding recycling stability of TzTz-TA. Notably, attendance of an induction period was observed during TzTz-TA photocatalysis. This work highlights the vast potential of designing triazine-based porous materials to meet the tailor-made demands, such as the oxidative transformation of organic molecules with O₂.

Two-Dimensional Covalent Organic Frameworks as Photocatalysts for Solar Energy Utilization

In the context of energy crisis and global warming, developing clean and sustainable energy is receiving increasing attention. Photocatalytic process including water splitting, CO₂ reduction, coenzyme regeneration, etc., provides an ideal way to utilize renewable solar resources. The photocatalyst plays a central role in photocatalytic processes. Organic porous polymers have recently gained extensive attention in photocatalysis. Covalent organic frameworks (COFs), as one of the organic porous polymers, have the characteristics of high crystallinity, porosity and structural designability that make them perfect platforms for photocatalysis. In this minireview, the recent progresses of 2D COFs as photocatalysts were summarized including our recent work. The synthesis of the diversified structures of the COFs including the different linkages was first introduced. Then, the photocatalytic applications of the 2D COFs including photocatalytic hydrogen evolution, CO₂ conversion, coenzyme regeneration and other traditional organic reaction were then discussed. Finally, conclusions and prospects were provided in the last section. This article is protected by copyright. All rights reserved.

Recent Advances of Photocatalytic Hydrogenation of CO2 to Methanol

Constantly increasing hydrocarbon fuel combustion along with high levels of carbon dioxide emissions has given rise to a global energy crisis and environmental alterations. Photocatalysis is an effective technique for addressing this energy and environmental crisis. Clean and renewable solar energy is a very favourable path for photocatalytic CO2 reduction to value-added products to tackle problems of energy and the environment. The synthesis of various products such as CH4, CH3OH, CO, EtOH, etc., has been expanded through the photocatalytic reduction of CO2. Among these products, methanol is one of the most important and highly versatile chemicals widely used in industry and in day-to-day life. This review emphasizes the recent progress of photocatalytic CO2 hydrogenation to CH3OH. In particular, Metal organic frameworks (MOFs), mixed-metal oxide, carbon, TiO2 and plasmonic-based nanomaterials are discussed for the photocatalytic reduction of CO2 to methanol. Finally, a summary and perspectives on this emerging field are provided.

Triazine-Based Conjugated Microporous Polymers for Efficient Hydrogen Production

Developing visible-light-active porous organic polymers with high photocatalytic efficiency is highly desirable. Here, two triazine-based conjugated microporous polymers were synthesized. The structures were controllably adjusted to explore the structure-photocatalytic activity relationship. T-CMP-1 containing more triazine units exhibited a hydrogen evolution rate of 3214.3 μmol h^-1 g^-1, much higher than that of T-CMP-2 (242.1 μmol h^-1 g^-1). The increasing contents of triazine units bring better hydrogen evolution efficiency.

Thiazolo[5,4‑d]thiazole linked conjugated microporous polymer photocatalysis for selective aerobic oxidation of amines

Recently, conjugated microporous polymers (CMPs) comprised of thiazolo[5,4-d]thiazole (TzTz) linkages have received much attention due to their excellent photoelectric properties. Herein, the polycondensation of dithiooxamide and benzyl aldehydes of C₂, C₃, and D_2h symmetry afforded three TzTz-linked CMPs, namely TzTz-CMP-1, TzTz-CMP-2, and TzTz-CMP-3. Importantly, the porous and flexible characteristics of TzTz-linked CMPs enable the smooth selective aerobic oxidation of amines in ethanol (C₂H₅OH), a clean but redox-active solvent. All three TzTz-linked CMPs significantly surpass the benchmark mesoporous graphite carbonnitride (mpg-C₃N₄) photocatalyst. Intriguingly, TzTz-CMP-2 displays the best photocatalytic activity for the blue-light-mediated selective transformation of primary and secondary amines into imines. The conversions of amines were up to 90% with excellent selectivities for imines. This work highlights that CMPs with TzTz linkages may offer efficient photocatalytic selective transformations under genuinely ambient conditions.