Nitrogen-Doped Carbon Quantum Dots from Poly(ethyleneimine) for Optical Dual-Mode Determination of Cu2+ and l-Cysteine and Their Logic Gate Operation

Fluorescent and colorimetric dual-mode detection of Cu2+ based on carbon dots

A fluorescent and colorimetric dual-mode strategy based on carbon dots (CDs) was rationally designed for sensitive determination of Cu2+. Green fluorescent CDs with high absolute quantum yield of 72.9% were synthesized by facile one-step hydrothermal treatment of triethylenetetramine and Rose Bengal. Cu2+ could trigger the oxidative and chromogenic reaction of p-phenylenediamine (PPD) to generate chromogenic PPDox, accompanied by the fluorescence quenching of the CDs. The quenching mechanism was identified as the inner filter effect between PPDox and CDs. Therefore, a colorimetric/fluorescent dual-mode detection method for Cu2+ recognition was constructed. The limits of detection for Cu2+ were 4.14 μM and 1.28 μM for colorimetric and fluorescent mode, respectively. In addition, this method had achieved satisfactory results in the detection of Cu2+ in real serum samples.

Transforming bio-waste lignin into amine functionalized carbon quantum dots for selective detection of trace Cu2+ in aqueous system

Developing carbon quantum dots (CQDs) from bio-waste lignin for effectively detecting Cu2+ is of great significance for promoting the value-added utilization of lignin resources. However, the limited amount of surface-active groups and low quantum yield of lignin-based CQDs hinder their application in this regard. Herein, bio-waste lignin was converted into value-added amine functionalized CQDs using a facile two-step hydrothermal approach. The as-synthesized CQDs modified with amino groups exhibit bright green fluorescence, abundant surface functional groups, high water solubility and uniform particle size (3.9 nm). Systematic analysis demonstrates that the rich NH2 groups (~12.3 %) on the CQDs backbone improve their fluorescence properties (quantum yield increased from 3.4 % to 21.1 %) and specific detection ability for Cu2+. The developed NH2-CQDs serve as an efficient fluorescent probe, displaying high sensitivity and selectivity towards Cu2+ in aqueous system, with a detection limit of 2.42 μmol/L, which is lower than the maximum permitted amount of Cu2+ in drinking water (20 μmol/L). The detection mechanism of NH2-CQDs for Cu2+ is attributed to the synergy of static quenching and photo-induced electron transfer. This study provides a valuable reference for the synthesis of high-quality fluorescent CQDs from lignin resources and the effective detection of trace Cu2+ in aquatic environments.

Long wavelength emissive ZnO/CQDs phosphor with high color purity and its application in sensitive detection of cadmium (II)

Production of color-tunable emission via simple method for upcoming displays and lighting technologies, and their exceptional luminescence provide considerable potential in sensing application. As environmental pollution and diseases brought by cadmium have always been global issues, therefore, it is imperative to develop an inexpensive, quick, easy, and selective approach for detecting trace cadmium. Herein, we describe the preperation of ZnO/carbon quantum dots (ZnO/CQDs) nanocomposite that emits strongly in the yellow-orange zone with the chromaticity coordinates (0.51, 0.47) and a high color purity (CP) value of 94.3%. The as-produced ZnO/CQDs are used as a fluorescence sensor for Cd2+ via quenching mechanism due to competitive coordination between ZnO/CQDs and Cd2+ with the limit of detection (LOD) of 0.14 μM. Additionally, the suggested method can successfully detect Cd2+ in water samples, demonstrating the feasibility and potential uses of the sensing platform. This study may pave the way for the development of environmentally safe, high-performing, and inexpensive color-tunable phosphor for white LEDs and sensing applications.

Fabrication of 1,8-naphthalimide modified cellulose derivative composite fluorescent hydrogel probes and their application in the detection of Cr(VI)

The design and development of a rapid and quantitative method for the detection of heavy metal ions is of great importance for environmental protection. We have prepared a 1,8-Naphthalimide modified cellulose composite fluorescent hydrogel (CENAEA/PAA) with a stereo double network structure. Characterized by excellent hydrogel functional structure and fluorescence detection performance, it can efficiently and selectively identify and detect Cr(VI) with linear quenching in the range of 0-400 μmol/L and detection limit of 0.58 μmol/L for Cr(VI). The results show that the CENAEA/PAA can effectively adsorb Cr(VI) with a maximum adsorption capacity of 189.04 mg/g. Finally, the morphological characteristics, chemical structure, fluorescence properties and adsorption behavior of CENAEA/PAA were analyzed and fitted well with the pseudo-second-order model and Freundlich model. Thus, the present work provides a green and sustainable approach for the synthesis of a functional material that can be used for the detection and adsorption of heavy metal ions.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Histamine Recognition by Carbon Dots from Plastic Waste and Development of Cellular Imaging: Experimental and Theoretical Studies

The present work highlights the sustainable approach for the transformation of plastic waste into fluorescent carbon dots (CDs) through carbonization and then they were functionalized with L-cysteine and o-phenylenediamine. CDs which were characterized by different analytical techniques such as X-ray diffraction (XRD), thermogravimetric analysis (TGA), Scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are employed to recognize Cu2+, Fe2+, and Hg2+ ions. The results show that the fluorescence emission was considerably quenched, and it is consistent with the interference and Jobs plots. The detection limit was found to be 0.35µM for Cu(II), 1.38 µM for Hg(II), and 0.51µM Fe(III). The interaction of CDs with metal ions enhances the fluorescence intensity detecting histamine successfully. It shows that plastic waste-based CDs can be applied clinically to detect toxic metals and biomolecules. Moreover, the system was employed to develop the cellular images using Saccharomyces cerevisiae cells with the support of a confocal microscope. Furthermore, theoretical studies were performed for the naphthalene layer (AR) as a model for C-dots, then optimized its structure and analyzed by using the molecular orbital. The obtained TD-DFT spectra coincided with experimental spectra for CDs/M2+/histamine systems.

Platinum Palladium Bimetallic Nanozymes Stabilized with Vancomycin for the Sensitive Colorimetric Determination of L-cysteine

Many diseases in the human body are related to the level of L-cysteine. Therefore, it is crucial to establish an efficient, simple and sensitive platform for L-cysteine detection. In this work, we synthesized platinum palladium bimetallic nanoparticles (Van-Ptm/Pdn NPs) using vancomycin hydrochloride (Van) as a stabilizer, which exhibited high oxidase-like catalytic activity. In addition, the catalytic kinetics of the Van-Pt1/Pd1 NPs followed the typical Michaelis-Menten equation, exhibiting a strong affinity for 3,3',5,5'-tetramethylbenzidine substrates. More importantly, we developed a simple and effective strategy for the sensitive colorimetric detection of L-cysteine using biocompatible Van-Pt1/Pd1 NPs. The detection limit was low, at 0.07 μM, which was lower than the values for many previously reported enzyme-like detection systems. The colorimetric method of the L-cysteine assay had good selectivity. The established method for the detection of L-cysteine showed promise for biomedical analysis.

Protective effects of Scutellariae Radix Carbonisata-derived carbon dots on blood-heat and hemorrhage rats

As the charcoal processing product of Scutellariae Radix (SR), SR Carbonisata (SRC) has been clinically used as a cooling blood and hemostatic agent for thousands of years. However, the underlying active ingredients and mechanism of SRC still remained unspecified. In this study, SRC derived carbon dots (SRC-CDs) were extracted and purified from the aqueous solution of SRC, followed by physicochemical property assessment by series of technologies. The cooling blood and hemostatic effects of SRC-CDs were further evaluated via a blood-heat and hemorrhage (BHH) rat model. Results showed that the diameters of obtained fluorescent SRC-CDs ranged from 5.0 nm to 10.0 nm and possessed functional group-rich surfaces. Additionally, the as-prepared SRC-CDs showed remarkable cooling blood and hemostasis effects in BHH model, mainly manifested by significant improvement of elevated rectal temperature, inflammatory cytokines (TNF-α, IL-6, and IL-1β) levels, as well as protein expressions of myD88 and NF-κB p65, abnormal coagulation parameters (elevated APTT and FIB), hemogram parameters (RBC, HGB, and HCT), and histopathological changes in lung and gastric tissues. This study, for the first time, demonstrated that SRC-CDs were the cooling blood and hemostatic active components of SRC, which could inhibit the release of inflammatory cytokines by regulating myD88/NF-κB signaling pathway, and activating the fibrin system and endogenous coagulation pathway. These results not only provide a new perspective for the study of active ingredients of carbonized herbs represented by SRC, but also lay an experimental foundation for the development of next-generation nanomedicines.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

Supramolecular Chemistry of Carbon-Based Dots Offers Widespread Opportunities

Carbon dots are an emerging class of nanomaterials that has recently attracted considerable attention for applications that span from biomedicine to energy. These photoluminescent carbon nanoparticles are defined by characteristic sizes of <10 nm, a carbon-based core and various functional groups at their surface. Although the surface groups are widely used to establish non-covalent bonds (through electrostatic interactions, coordinative bonds, and hydrogen bonds) with various other (bio)molecules and polymers, the carbonaceous core could also establish non-covalent bonds (ππ stacking or hydrophobic interactions) with π-extended or apolar compounds. The surface functional groups, in addition, can be modified by various post-synthetic chemical procedures to fine-tune the supramolecular interactions. Our contribution categorizes and analyzes the interactions that are commonly used to engineer carbon dots-based materials and discusses how they have allowed preparation of functional assemblies and architectures used for sensing, (bio)imaging, therapeutic applications, catalysis, and devices. Using non-covalent interactions as a bottom-up approach to prepare carbon dots-based assemblies and composites can exploit the unique features of supramolecular chemistry, which include adaptability, tunability, and stimuli-responsiveness due to the dynamic nature of the non-covalent interactions. It is expected that focusing on the various supramolecular possibilities will influence the future development of this class of nanomaterials.

Facile wound dressing replacement: Carbon dots for dissolving alginate hydrogels via competitive complexation

Dissolvable hydrogels have shown great potentials in removing the exudes and alleviating pain during wound dressing replacement. Herein, a series of carbon dots (CDs) composing high complexation ability with Cu²⁺ were prepared for capturing Cu²⁺ from Cu²⁺-alginate hydrogels. CDs were prepared using biocompatible lysine as the main starting material, while ethylenediamine was chosen as the other starting material for its extremely high complexation ability with Cu²⁺. The complexation ability increased with the increasing amount of ethylenediamine, while the cell viability decreased. When the mass ratio of ethylenediamine to lysine in CDs was above 1/4, six-coordinate copper centers could be formed. CD_1/4 at the concentration of 90 mg/mL could dissolve Cu²⁺-alginate hydrogels within 16 min, which was about twice faster than lysine. In vivo results showed the replaced hydrogels could ameliorate hypoxic conditions, alleviate local inflammatory reactions and promote the healing speed of burn wounds. Thus, the above results suggested the competitive complexation of CDs with Cu²⁺ could effectively dissolve Cu²⁺-alginate hydrogels, which have much potential in realizing facile wound dressing replacement.

Wet-spinning fluorescent alginate fibres achieved by doping PEI modified CPDs for multiple anti-counterfeiting

Carbonized polymer dots (CPDs) with satisfactory excitation-dependent-emission and biocompatibility had great potential in anti-counterfeiting fibres field. However, it was difficult for CPDs to combined into the fibres due to the unstable interaction between CPDs and spinnable polymer matrix. Polyethyleneimine (PEI) was used to modify CPDs (namely PEI-CPDs) for achieving stable interactions with sodium alginate (SA) by a simple method, which including the physical interaction between the amino groups of PEI-CPDs and carboxyl groups of SA and the chain entanglement between two types of polymer chains. Then alginate fibres based on PEI-CPDs (PEI-CPDs/CaALG fibres) were successfully prepared by wet-spinning for the first time with less loss of PEI-CPDs. The high mechanical strength, excellent thermal stability and good biocompatibility achieved by PEI-CPDs/CaALG fibres. Furthermore, the fibres exhibited the excitation-dependent-emission property. Anti-counterfeiting of the fibres was conducted on both textile and papers, which showed higher security than the existing anti-counterfeiting fibres.

Bi3+ and Tb3+ Co-doped Cs2AgInCl6 Lead-free double perovskite nanocrystals for detection of temperature and copper ions

The content of Cu²⁺ in lubricating oil and lubricant temperature are important indicators predicting mechanical failure. Therefore, developing a nontoxic fluorescence probe is necessary to detect Cu²⁺ and temperature in lubricating oil. The lead-free inorganic double perovskite nanocrystals (NCs) Cs₂AgInCl₆ are potential candidates. However, the low fluorescence intensity and the high excitation energy required of Cs₂AgInCl₆ NCs limit their practical applications. In this study, Bi³⁺ and Tb³⁺ were successfully co-doped into Cs₂AgInCl₆ NCs via the hot-injection method. The doping of Bi³⁺ produces a broad emission originating from self-trapped excitons and reduces the excitation energy, allowing commercial LEDs as excitation sources. Tb³⁺ ions doping offers characteristic emission peaks (⁵D₀-⁷F_J) of Tb³⁺ ions and improves the fluorescence intensity of Cs₂AgInCl₆ NCs. Furthermore, the Cs₂AgInCl₆: Bi³⁺/Tb³⁺ NCs have been employed as optical thermometry, which provide a temperature calibration curve with the maximum absolute and relative sensitivities of 2.15% K^-1 at 350 K and 2.25% K^-1 at 303 K in the temperature range of 303-423 K, respectively. Finally, the nanocrystals have been applied to detect Cu²⁺ in lubricating oil. The fluorescent probe shows a good detection sensitivity of 8.94 × 10^-4 nM^-1 and a low detection limit of 14.3 nM in the range of 10-300 nM. This work not merely offers a novel way for improving the luminescence performances of double perovskite NCs Cs₂AgInCl₆, but broadens their potential for detection of Cu²⁺ and temperature.

Review on Carbon Dot-Based Fluorescent Detection of Biothiols

Biothiols, such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), play a vital role in gene expression, maintaining redox homeostasis, reducing damages caused by free radicals/toxins, etc. Likewise, abnormal levels of biothiols can lead to severe diseases, such as Alzheimer's disease (AD), neurotoxicity, hair depigmentation, liver/skin damage, etc. To quantify the biothiols in a biological system, numerous low-toxic probes, such as fluorescent quantum dots, emissive organic probes, composited nanomaterials, etc., have been reported with real-time applications. Among these fluorescent probes, carbon-dots (CDs) have become attractive for biothiols quantification because of advantages of easy synthesis, nano-size, crystalline properties, low-toxicity, and real-time applicability. A CDs-based biothiols assay can be achieved by fluorescent "Turn-On" and "Turn-Off" responses via direct binding, metal complex-mediated detection, composite enhanced interaction, reaction-based reports, and so forth. To date, the availability of a review focused on fluorescent CDs-based biothiols detection with information on recent trends, mechanistic aspects, linear ranges, LODs, and real applications is lacking, which allows us to deliver this comprehensive review. This review delivers valuable information on reported carbon-dots-based biothiols assays, the underlying mechanism, their applications, probe/CDs selection, sensory requirement, merits, limitations, and future scopes.

Dual-mode detection sensor based on nitrogen-doped carbon dots from pine needles for the determination of Fe3+ and folic acid

In this study, nitrogen-doped carbon dots (N-CDs) from pine needles were obtained by one-step hydrothermal synthesis without any chemical reagents. The fluorescence quenching and absorbance enhancement of N-CDs occurred when Fe³⁺ and folic acid (FA) were added. Based on this, the dual-mode detection sensor by fluorescence and ultraviolet-visible (UV-Vis) spectrophotometry for the determination of Fe³⁺ and FA was established. Detected by the dual-mode detection sensor under the optimized condition, the linear range of Fe³⁺ was 0.1-540 μM and FA was 0.1-165 μM. At the same time, the two inputs "NOR" and "OR" logic gates are constructed successfully according to the dual-mode sensor signals. The proposed dual-mode detection sensor is simple, efficient and stable; it can be applied to determinate Fe³⁺ and FA in practical samples successfully and the results are satisfactory.

A red-emitting Europium(III) complex as a luminescent probe with large Stokes shift for the sequential determination of Cu2+ and biothiols in real samples

In this work, a novel Eu³⁺-DTPA-bis(AMC) complex with red luminescence was designed and synthesized for sequential detection of Cu²⁺ and biothiols (Cys/Hcy/GSH) based on the displacement strategy with the good selectivity, high sensitivity, and large Stokes shift (288 nm). The possible detection mechanism was verified by UV-vis, the high-resolution mass spectrometry, and the fluorescence decay curve. The experimental parameters, including the solution pH, the incubation time, the concentration ratio of Eu³⁺-DTPA-bis(AMC) to Cu²⁺ and biothiols concentration, were optimized. Under the optimal conditions, it shows a good linear relationship between the concentration (0-10 μM) of Cu²⁺ and the fluorescence intensity of Eu³⁺-DTPA-bis(AMC), with a low detection limit of 0.065 μM. The linear range and the limit of detection of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system for Cys/Hcy/GSH were 2.5-22.5/5-45/5-50 μM and 0.11/0.07/0.05 μM, respectively. Surprisingly, the high or low concentration of Eu³⁺-DTPA-bis(AMC)/Cu²⁺ can significantly affect the selectivity of the sensing system to biothiols (Cys/GSH/Hcy). When the concentration of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system is 10.0 μΜ, it could recognize biothiols (Cys/GSH/Hcy) from other substances, but when the concentration is as low as 3.3 μM, it could further specifically distinguished Cys from Hcy/GSH. Owing to the high anti-interference characteristics, accuracy and specificity, the sensing system was well applied to the cascade detection of Cu²⁺ in actual environmental samples and Cys in biological and food samples, including FBS, urine, milk, beverage, fresh juice with the satisfactory recoveries from 96.20 to 106.80 %.

Multifunctional N,S-doped and methionine functionalized carbon dots for on-off-on Fe3+ and ascorbic acid sensing, cell imaging, and fluorescent ink applying

Fluorescent carbon dots (CDs) have been identified as potential nanosensors and attracted tremendous research interests in wide areas including anti-counterfeiting, environmental and biological sensing and imaging in considering of the attractive optical properties. In this work, we present a CDs based fluorescent sensor from polyvinylpyrrolidone, citric acid, and methionine as precursors by hydrothermal approach. The selective quantifying of Fe3+ and ascorbic acid (AA) are based on the fluorescent on-off-on process, in which the fluorescent quenching is induced by the coordination of the Fe3+ on the surface of the CDs, while the fluorescence recovery is mainly attributed to redox reaction between Fe3+ and AA, breaking the coordination and bringing the fluorescence back. Inspired by the good water solubility and biocompatibility, significant photostability, superior photobleaching resistance as well as high selectivity, sensitivity, and interference immunity, which are constructed mainly from the N,S-doping and methionine surface functionalization, the CDs have not only been employed as fluorescence ink in multiple anti-counterfeiting printing and confidential document writing or transmitting, but also been developed as promising fluorescence sensors in solution and solid by CDs doped test strips and hydrogels for effectively monitoring and removing of Fe3+ and AA in environmental aqueous solution. The CDs have been also implemented as effective diagnostic candidates for imaging and tracking of Fe3+ and AA in living cells, accelerating the understanding of their function and importance in related biological processes for the prevention and treatment specific diseases.

Electronic Supplementary Material

Supplementary material (fluorescence spectra: UV and Xe irradiation, TG, thermo stability, ionic strength, relationship between fluorescence responses at different concentrations of Fe3+ and AA, reaction time-dependent fluorescent responses; XPS spectra of CDs + Fe3+ and Fe3+@CDs + AA; structural characterization; equations about fluorescence lifetime, quantum yield and LOD; comparison of the CDs for the detection of Fe3+ and AA with reported methods; detection of Fe3+ and AA in real samples; absorption of Fe3+ in environmental samples and MTT assay results) is available in the online version of this article at 10.1007/s12274-022-5107-7.

Catalytic nanozyme Zn/Cl-doped carbon quantum dots as ratiometric fluorescent probe for sequential on-off-on detection of riboflavin, Cu2+ and thiamine

A novel metal-doped Zn/Cl carbon quantum dots (Zn/Cl-CQDs) was developed successfully as ratiometric fluorescent probes for the sequential on-off-on detection of riboflavin, Cu²⁺ ion and thiamine. The excellent catalytic performance of the Zn/Cl-CQDs nanozyme serves as an ideal platform for sensitive detection of thiamine. Due to the addition of riboflavin to the Zn/Cl-CQDs, the blue emission peak of Zn/Cl-CQDs at 440 nm remains unaffected and used as an internal reference approach, while the green emission peak of riboflavin at 520 nm appeared and increased remarkably. Following the presence of Cu²⁺, a quenching blue fluorescence signal of Zn/Cl-CQDs was observed which resulted in consequent fluorescent 'turn-off' response toward Cu²⁺ ion. Finally, upon the addition of thiamine to the above solution under alkaline condition, the blue emission of Zn/Cl-CQDs was gradually recovered. The prepared Zn/Cl-CQDs could act as a nanozyme catalyst for directly catalyzing the oxidation of non-fluorescent substrate of thiamine to produce highly fluorescent substrate of thiochrome. As a result, the blue fluorescence emission peak at 440 nm was recovered. Eventually, the sequential detection properties of ratiometric probes for riboflavin, Cu²⁺ ion and thiamine were successfully applied in VB2 tablets, drinking water and VB1 tablet with good recoveries of 96.21%, 98.25% and 98.44%, respectively.

Nitrogen-doped carbon dots coupled with morin-Al3+: Cleverly design an integrated sensing platform for ratiometric optical dual-mode and smartphone-assisted visual detection of fluoride ion

Ratiometric fluorescence sensor has high selectivity and good sensitivity; however, its development is limited by intricate design, tedious synthesis, etc. Herein, a facile and effective ratiometric fluorescence sensing platform for fluoride ion (F^-) detection was developed by simply combining nitrogen-doped carbon dots (N-CDs) and morin-Al³⁺ based on inner filter effect (IFE). The competitive binding of F^- to Al³⁺ obviously decreased morin-Al³⁺ fluorescence and increased N-CDs fluorescence, attributing to the inhibition of IFE between N-CDs and morin-Al³⁺. The as-constructed ratiometric fluorescence sensing platform can be used for F^- detection with a wide linear range (0.5-150 μM) and a low detection limit (55.8 nM). Interestingly, with the introduction of F^- into the N-CDs/morin-Al³⁺ sensing platform, a distinguishable change in fluorescence color from green to blue enabled the N-CDs/morin-Al³⁺ system to be used as a smartphone-assisted visual sensing platform for F^- detection with a detection limit of 2.09 μM. This platform was successfully applied for the onsite monitoring of F^- in various water samples with satisfying results. These findings provide a novel guidance for the facile construction of a ratiometric optical dual-mode and smartphone-assisted sensing platform based on CDs, revealing the broad application prospect of CDs in environmental monitoring field.

Intelligently design primary aromatic amines derived carbon dots for optical dual-mode and smartphone imaging detection of nitrite based on specific diazo coupling

Primary aromatic amines derived carbon dots (PAA-CDs) with the protonated amino groups and high quantum yield of 46% were favorably obtained by one-step solvothermal treatment of m-phenylenediamine (m-PDA) in acidic environment. The interaction between the PAA-CDs and nitrite (NO₂^-) was inherited the characteristic reaction of m-PDA (a primary aromatic amine) and NO₂^-, resulting in strong fluorescence quenching and obvious absorption variation of the PAA-CDs. Meanwhile, a chromogenic reaction of diazo coupling can cause significant color changes. Hence, the PAA-CDs were developed for an optical dual-mode and smartphone imaging sensor for NO₂^- detection in the range of 3.0 ~ 40.0 μM with high selectivity, good sensitivity, and excellent anti-interference capability. A limit of detection (LOD) of 0.024 μM and 0.16 μM was implemented by fluorometry and colorimetry, respectively. For smartphone imaging colorimetry, the LODs of 0.46 μM (visible color) and 0.99 μM (fluorescence color) were acquired. More importantly, the established sensor has been successfully applied for the dynamic detection of NO₂^- in various food samples with the satisfying results. A smartphone imaging colorimetry method based on the CDs was firstly proposed to visually and quantitatively detect NO₂^-, which will broaden the application range of the CDs in food safety inspection.

Carbon Quantum Dots-Based Fluorescent Hydrogel Hybrid Platform for Sensitive Detection of Iron Ions

In this study, we prepared novel fluorescent carbon quantum dots/hydrogel nanocomposite material (CQDsHG) with good adsorption and stable fluorescence detection of Fe3+. The materials were subsequently characterized according to their morphological features, chemical composition, adsorption, and optical properties. The carbon quantum dots (CQDs) were prepared using a microwave-assisted hydrothermal method in no more than 15 min, and the as-prepared CQDs exhibited excellent water solubility, as well as emitted strong bright blue fluorescence with an ultrahigh quantum yield of 93.60%. The CQDs were then loaded into a hydrogel (HG) using the sol-gel method to obtain a functional CQDsHG. The CQDsHG exhibited high adsorption amounts (31.94 mg/g) and a good quenching response for Fe3+, thus, it could be used as a sensor to selectively detect Fe3+ in the linear range of 0–150 μM with a detection limit of 0.24 μM. We observed minimal difference in the fluorescence lifetimes between the CQDsHG with and without a quencher (Fe3+), with values of 5.816 ns and 5.824 ns, respectively, confirming that Fe3+ was statically quenched on CQDsHG. The results indicated that the innovative combination of CQDs and HG can improve the synergistic performance of each component for the adsorption and quantitative detection of heavy metal ions in the aqueous environment.

Fluorescence and Colorimetric Dual-Mode Ratiometric Sensor Based on Zr-Tetraphenylporphyrin Tetrasulfonic Acid Hydrate Metal-Organic Frameworks for Visual Detection of Copper Ions

As a special heavy metal ion, copper ions (Cu²⁺) play an indispensable role in the fields of environmental protection and safety. Their excessive intake not only easily leads to diseases but also affects human health. Therefore, it is particularly important to construct a facile, effective, and highly selective Cu²⁺ probe. Herein, a novel Zr-tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) metal-organic framework (ZTM) was fabricated using TPPS as the ligand and exhibited strong red fluorescence with a high quantum yield of 12.22%. In addition, we designed a ratiometric fluorescent probe by introducing green fluorescein isothiocyanate (FITC), which was not subject to environmental interference and had high accuracy. When exposed to different amounts of Cu²⁺, the fluorescence emission at 667 nm from ZTMs is remarkably quenched, while that at 515 nm from FITC is enhanced, accompanied by a change in the solutions' fluorescence color from red to green under a UV lamp. Besides, the ZTMs solutions display an excellent ratiometric colorimetric response for Cu²⁺ and produce an obvious color change (from green to colorless) that is visible to the naked eye. The fabricated ZTMs@FITC fluorescent probe exhibits distinguished performance for Cu²⁺ detection with linear ranges of 0.1 to 5 μM and 5 to 50 μM, as well as a low detection limit of 5.61 nM. Moreover, a colorimetric sensor based on ZTMs exhibits a good linear range from 0.1 to 20 μM for Cu²⁺ with the detection limit of 4.96 nM. Furthermore, the dual-signal ratiometric sensor has significant specificity for Cu²⁺ and is successfully applied for monitoring Cu²⁺ in water samples, which proves its practical application value in the environment and biological systems.

Surface engineering of gadolinium oxide nanoseeds with nitrogen-doped carbon quantum dots: an efficient nanocomposite for precise detection of antibiotic drug clioquinol

Nitrogen-doped carbon quantum dot decorated gadolinium oxide nanoseeds as an electrode modifier for the sensitive electrochemical detection of the antibiotic drug clioquinol in urine samples.

A yellow-emitting carbon quantum dot-based fluorescent logic gate for the continuous detection of Au3+ and biothiols

Yellow-emitting carbon quantum dots, named Y-CQDs, were synthesized from O-phenylenediamine and ethylene glycol via a one-pot hydrothermal method. A fluorescent IMPLICATION logic gate for the continuous and "on-off-on" detection of Au³⁺ and biothiols in tap water at the nanoscale level was constructed based on these QDs. It showed promise in real sample detection and also as a fluorescent ink.

Ratiometric detection of p-nitrophenol and its derivatives using a dual-emissive neuron cell-like carbonized probe based on a ππ stacking quenching mechanism

p-Nitrophenol and its derivatives can cause serious harm to the health of mankind and the earth's ecosystem. Therefore, it is necessary to develop a novel and rapid detection technology for p-nitrophenol and its derivative. Herein, excellent water-soluble, large-size and dual-emissive neuron cell-analogous carbon-based probes (NCNPs) have been prepared via a solvothermal approach, using o-phenylenediamine as the only precursor, which exhibit two distinctive fluorescence (FL) peaks at 420 and 555 nm under 345 nm excitation. The NCNPs show a neuron cell-like branched structure, are cross-connected, and are in the range of 10-20 nm in skeleton diameter. Interestingly, their blue-green dual-colour fluorescence is quenched by p-nitrophenol or its derivative due to the specific mechanism of the ππ stacking interactions or internal filtration effect. Accordingly, a simple, rapid, direct and free-label ratiometric FL detection of p-nitrophenol is proposed. An excellent linear relationship shows linear regions over the range of 0.1-50 μM between the ratio of the FL intensity (FL555 nm/FL420 nm) and the concentrations of p-nitrophenol. The detection limit is as low as 43 nM (3σ). Importantly, the NCNP-based probe also shows acceptable repeatability and reproducibility for the detection of p-nitrophenol and its derivatives, and the recovery results for p-nitrophenol in real wastewater samples are favourable.

Multifunctional N-Doped Carbon Dots for Bimodal Detection of Bilirubin and Vitamin B12, Living Cell Imaging, and Fluorescent Ink

A N-doped carbon dot (NCD) has been synthesized via a simplistic one-step hydrothermal technique using l-aspartic acid and 3,6-diaminoacridine hydrochloride. The NCDs exhibit a high quantum yield (22.7%) and excellent optical stability in aqueous media. Additionally, NCDs display good solid-state yellowish-green emission and are suitable for security ink applications. The remarkable fluorescence (FL) properties of NCDs are further applied to develop a multifunctional sensor for bilirubin (BR) and vitamin B₁₂ (VB12) via fluorescence quenching. We have systematically studied the FL quenching mechanisms of the two analytes. The primary quenching mechanism of BR is via the Förster resonant energy transfer (FRET) pathway facilitated by the H-bonding network between the hydrophilic moieties existing at the surface of BR and NCDs. In contrast, the inner filter effect (IFE) is mainly responsible for the recognition of VB12. The practicability of the nanoprobe NCDs is further tested in real-sample analysis for BR (human serum and urine samples) and VB12 (VB12 tablets, human serum, and energy drink) with a satisfactory outcome. The in vitro competency is also verified in the human cervical cancer cell line (HeLa cell) with negligible cytotoxicity and significant biocompatibility. This result facilitates the application of NCDs for bioimaging and recognition of VB12 in a living organism.

Green synthesis of a deep-ultraviolet carbonized nanoprobe for ratiometric fluorescent detection of feroxacin and enrofloxacin in food and serum samples

A sensitive ratiometric fluorescent probe for EFC and FXC detection in milk and bovine serum samples based on the internal filtration effect.