1
|
Qureshi SS, Nizamuddin S, Xu J, Vancov T, Chen C. Cellulose nanocrystals from agriculture and forestry biomass: synthesis methods, characterization and industrial applications. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024:10.1007/s11356-024-35127-3. [PMID: 39340607 DOI: 10.1007/s11356-024-35127-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2024] [Accepted: 09/19/2024] [Indexed: 09/30/2024]
Abstract
Agricultural and forestry biomass wastes, often discarded or burned without adequate management, lead to significant environmental harm. However, cellulose nanocrystals (CNCs), derived from such biomass, have emerged as highly promising materials due to their unique properties, including high tensile strength, large surface area, biocompatibility, and renewability. This review provides a detailed analysis of the lignocellulosic composition, as well as the elemental and proximate analysis of different biomass sources. These assessments help determine the yield and characteristics of CNCs. Detailed discussion of CNC synthesis methods -ranging from biomass pretreatment to hydrolysis techniques such as acid, mineral, solid acid, ionic liquid, and enzymatic methods-are provided. The key physical, chemical, and thermal properties of CNCs are also highlighted, particularly in relation to their industrial applications. Recommendations for future research emphasize the need to optimize CNC synthesis processes, identify suitable biomass feedstocks, and explore new industrial applications.
Collapse
Affiliation(s)
- Sundus Saeed Qureshi
- Australian Rivers Institute and School of Environment and Science, Griffith University, Nathan Campus, Brisbane, Queensland, 4111, Australia
- Cooperative Research Centre for High Performance Soils, Callaghan, NSW, Australia
| | - Sabzoi Nizamuddin
- Water Regulation Division, Grampians Wimmera Mallee Water (GWMWater) Corporation, Horsham, Victoria, 3400, Australia
| | - Jia Xu
- Australian Rivers Institute and School of Environment and Science, Griffith University, Nathan Campus, Brisbane, Queensland, 4111, Australia
- Cooperative Research Centre for High Performance Soils, Callaghan, NSW, Australia
| | - Tony Vancov
- NSW Department of Primary Industries, Elizabeth Macarthur Agricultural Institute, Menangle, NSW, 2568, Australia
| | - Chengrong Chen
- Australian Rivers Institute and School of Environment and Science, Griffith University, Nathan Campus, Brisbane, Queensland, 4111, Australia.
- Cooperative Research Centre for High Performance Soils, Callaghan, NSW, Australia.
| |
Collapse
|
2
|
Bloch M, Woźniak M, Dwiecki K, Borysiak S, Ratajczak I. Effect of Antisolvent Used to Regenerate Cellulose Treated with Ionic Liquid on Its Properties. Molecules 2024; 29:4227. [PMID: 39275075 PMCID: PMC11396786 DOI: 10.3390/molecules29174227] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2024] [Revised: 09/01/2024] [Accepted: 09/03/2024] [Indexed: 09/16/2024] Open
Abstract
The solvolysis reaction with ionic liquids is one of the most frequently used methods for producing nanometer-sized cellulose. In this study, the nanocellulose was obtained by reacting microcrystalline cellulose with 1-ethyl-3-methylimidazolium acetate (EmimOAc). The aim of this research was to determine the influence of various antisolvents used in the regeneration of cellulose after treatment with ionic liquid on its properties. The following antisolvents were used in this research: acetone, acetonitrile, water, ethanol and a mixture of acetone and water in a 1:1 v/v ratio. The nanocellulose was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM) and elemental analysis (EA). The results show that the antisolvent used to regenerate cellulose after the solvolysis reaction with EmimOAc affects its properties. Water, ethanol and a mixture of acetone and water successfully removed the used ionic liquid from the cellulose structure, while acetone and acetonitrile were unable to completely remove EmimOAc from the cellulosic material. The results of the XRD analysis indicate that there is a correlation between the ionic liquid content in the regenerated cellulose and its degree of crystallinity. Among the tested solvents, water leads to the effective removal of EmimOAc from the cellulose structure, which is additionally characterized by the smallest particle size and non-formation of agglomerates.
Collapse
Affiliation(s)
- Marta Bloch
- Department of Chemistry, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Wojska Polskiego 75, 60625 Poznan, Poland
| | - Magdalena Woźniak
- Department of Chemistry, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Wojska Polskiego 75, 60625 Poznan, Poland
| | - Krzysztof Dwiecki
- Department of Food Biochemistry and Analysis, Faculty of Food Science and Nutrition, Poznan University of Life Sciences, Mazowiecka 48, 60623 Poznan, Poland
| | - Sławomir Borysiak
- Institute of Chemical Technology and Engineering, Poznan University of Technology, Berdychowo 4, 60965 Poznan, Poland
| | - Izabela Ratajczak
- Department of Chemistry, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Wojska Polskiego 75, 60625 Poznan, Poland
| |
Collapse
|
3
|
Andrew LJ, Lizundia E, MacLachlan MJ. Designing for Degradation: Transient Devices Enabled by (Nano)Cellulose. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2401560. [PMID: 39221689 DOI: 10.1002/adma.202401560] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 08/11/2024] [Indexed: 09/04/2024]
Abstract
Transient technology involves materials and devices that undergo controlled degradation after a reliable operation period. This groundbreaking strategy offers significant advantages over conventional devices based on non-renewable materials by limiting environmental exposure to potentially hazardous components after disposal, and by increasing material circularity. As the most abundant naturally occurring polymer on Earth, cellulose is an attractive material for this purpose. Besides, (nano)celluloses are inherently biodegradable and have competitive mechanical, optical, thermal, and ionic conductivity properties that can be exploited to develop sustainable devices and avoid the end-of-life issues associated with conventional systems. Despite its potential, few efforts have been made to review current advances in cellulose-based transient technology. Therefore, this review catalogs the state-of-the-art developments in transient devices enabled by cellulosic materials. To provide a wide perspective, the various degradation mechanisms involved in cellulosic transient devices are introduced. The advanced capabilities of transient cellulosic systems in sensing, photonics, energy storage, electronics, and biomedicine are also highlighted. Current bottlenecks toward successful implementation are discussed, with material circularity and environmental impact metrics at the center. It is believed that this review will serve as a valuable resource for the proliferation of cellulose-based transient technology and its implementation into fully integrated, circular, and environmentally sustainable devices.
Collapse
Affiliation(s)
- Lucas J Andrew
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC, V6T 1Z1, Canada
| | - Erlantz Lizundia
- Life Cycle Thinking Group, Department of Graphic Design and Engineering Projects, Faculty of Engineering in Bilbao, University of the Basque Country (UPV/EHU), Bilbao, 48013, Spain
- BCMaterials, Basque Center for Materials, Applications, and Nanostructures, UPV/EHU Science Park, Leioa, 48940, Spain
| | - Mark J MacLachlan
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC, V6T 1Z1, Canada
- Stewart Blusson Quantum Matter Institute, University of British Columbia, 2355 East Mall, Vancouver, BC, V6T 1Z4, Canada
- WPI Nano Life Science Institute, Kanazawa University, Kanazawa, 920-1192, Japan
- UBC BioProducts Institute, 2385 East Mall, Vancouver, BC, V6T 1Z4, Canada
| |
Collapse
|
4
|
Volpe Bossa G, Hobbie E, May S. Counterion Release from Macroion Assemblies of Planar Geometry. J Phys Chem B 2024; 128:6966-6974. [PMID: 38958595 DOI: 10.1021/acs.jpcb.4c03222] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/04/2024]
Abstract
Macroions such as nanoparticles, polyelectrolytes, ionic gels, and amphiphiles can form condensed, often self-assembled, phases that are embedded in a solvent region. The condensed phase contains not only the partially or fully immobile charges of their macroions but also corresponding counterions that are mobile and thus free to migrate out of their confinement into the solvent region where they benefit from high translational entropy. Based on the nonlinear Poisson-Boltzmann model for monovalent ions, we quantify the corresponding fraction of released counterions for a planar slab geometry of the macroion phase. Slab thickness, extension of the solvent phase, fixed background charge density provided by the macroions, and dielectric constants inside slab and solvent combine into three dimensionless parameters that the fraction of released counterions depends on. We calculate that fraction and analyze the limits of a thin macroion phase, a large solvent phase, and linearized theory, where simple analytic results become available. Of particular interest is the presence of a single-planar interface that separates a bulk macroion phase from an extended solvent region. We calculate the apparent surface charge density that emerges due to the released counterions. Our model yields a comprehensive description of counterion partitioning between a planar macroion phase and a solvent region on the level of mean-field electrostatics in the absence of added salt ions.
Collapse
Affiliation(s)
- Guilherme Volpe Bossa
- Institute of Mathematical and Physical Sciences, Universidad Austral de Chile, Valdivia 5090000, Chile
| | - Erik Hobbie
- Department of Physics, North Dakota State University, Fargo, North Dakota 58108-6050, United States
| | - Sylvio May
- Department of Physics, North Dakota State University, Fargo, North Dakota 58108-6050, United States
| |
Collapse
|
5
|
Yang H, Edberg J, Say MG, Erlandsson J, Gueskine V, Wågberg L, Berggren M, Engquist I. Study on the Rectification of Ionic Diode Based on Cross-Linked Nanocellulose Bipolar Membranes. Biomacromolecules 2024; 25:1933-1941. [PMID: 38324476 DOI: 10.1021/acs.biomac.3c01353] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/09/2024]
Abstract
Nanocellulose-based membranes have attracted intense attention in bioelectronic devices due to their low cost, flexibility, biocompatibility, degradability, and sustainability. Herein, we demonstrate a flexible ionic diode using a cross-linked bipolar membrane fabricated from positively and negatively charged cellulose nanofibrils (CNFs). The rectified current originates from the asymmetric charge distribution, which can selectively determine the direction of ion transport inside the bipolar membrane. The mechanism of rectification was demonstrated by electrochemical impedance spectroscopy with voltage biases. The rectifying behavior of this kind of ionic diode was studied by using linear sweep voltammetry to obtain current-voltage characteristics and the time dependence of the current. In addition, the performance of cross-linked CNF diodes was investigated while changing parameters such as the thickness of the bipolar membranes, the scanning voltage range, and the scanning rate. A good long-term stability due to the high density cross-linking of the diode was shown in both current-voltage characteristics and the time dependence of current.
Collapse
Affiliation(s)
- Hongli Yang
- College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, P. R. China
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
| | - Jesper Edberg
- RISE Research Institutes of Sweden, Digital Systems, Smart Hardware, Bio-, Organic and Printed Electronics, Norrköping 60233, Sweden
| | - Mehmet Girayhan Say
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
| | - Johan Erlandsson
- Division of Fibre Technology, Department of Fibre and Polymer Technology, School of Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, Stockholm SE-100 44, Sweden
| | - Viktor Gueskine
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
- Wallenberg Wood Science Centre, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
| | - Lars Wågberg
- Division of Fibre Technology, Department of Fibre and Polymer Technology, School of Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, Stockholm SE-100 44, Sweden
- Wallenberg Wood Science Centre, Department of Fibre and Polymer Technology, School of Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, Stockholm SE-100 44, Sweden
| | - Magnus Berggren
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
- Wallenberg Wood Science Centre, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
| | - Isak Engquist
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
- Wallenberg Wood Science Centre, Department of Science and Technology, Linköping University, Norrköping SE-601 74, Sweden
| |
Collapse
|
6
|
Sarangi PK, Srivastava RK, Sahoo UK, Singh AK, Parikh J, Bansod S, Parsai G, Luqman M, Shadangi KP, Diwan D, Lanterbecq D, Sharma M. Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste. CHEMOSPHERE 2024; 349:140833. [PMID: 38043620 DOI: 10.1016/j.chemosphere.2023.140833] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Revised: 11/17/2023] [Accepted: 11/26/2023] [Indexed: 12/05/2023]
Abstract
New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.
Collapse
Affiliation(s)
- Prakash Kumar Sarangi
- College of Agriculture, Central Agricultural University, Imphal, 795004, Manipur, India
| | - Rajesh Kumar Srivastava
- Department of Biotechnology, GIT, Gandhi Institute of Technology and Management (GITAM), Visakhapatnam, 530045, India
| | | | - Akhilesh Kumar Singh
- Department of Biotechnology, Mahatma Gandhi Central University, Motihari, 845401, India
| | - Jigisha Parikh
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Shama Bansod
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Ganesh Parsai
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Mohammad Luqman
- Chemical Engineering Department, College of Engineering, Taibah University, Yanbu Al-Bahr-83, Al-Bandar District 41911, Kingdom of Saudi Arabia
| | - Krushna Prasad Shadangi
- Department of Chemical Engineering, Veer Surendra Sai University of Technology, Burla, Sambalpur, Odisha, 768018, India
| | - Deepti Diwan
- Washington University, School of Medicine, Saint Louis, MO, USA
| | - Deborah Lanterbecq
- Laboratoire de Biotechnologie et Biologie Appliquée, CARAH ASBL, Rue Paul Pastur, 11, Ath, 7800, Belgium
| | - Minaxi Sharma
- Laboratoire de Biotechnologie et Biologie Appliquée, CARAH ASBL, Rue Paul Pastur, 11, Ath, 7800, Belgium.
| |
Collapse
|
7
|
Wei Y, Zhao Y, Liu Y, Luo N, Gao Z, Hou P, Liu Y, Zhang Y, Huo P. Porphyrin-Regulated Heterostructured Hydrogel Ionic Diode with a High Rectification Ratio and Output Voltage. ACS APPLIED MATERIALS & INTERFACES 2023; 15:50391-50399. [PMID: 37870942 DOI: 10.1021/acsami.3c12243] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/25/2023]
Abstract
Nanochannel ionic diodes require extremely complex and expensive fabrication processes. Polyelectrolyte ionic diodes attracted widespread attention among ionic rectification systems due to their simplicity of development and the ability to break the size limits of the nanochannel. However, enhancement of their rectification ratio is still in the exploratory stage. In this study, chitosan (CS) hydrogels and sodium polyacrylate (PAAs) hydrogels were prepared as the substrates for the heterostructured ionic diodes. 5,10,15,20-Tetrakis(4-aminophenyl)-21H,23H-porphyrin (TAPP) was selected to regulate the rectification ratio of ionic diodes. By adding 0.05 wt % TAPP to the CS hydrogel, the rectification ratio of the ionic diode can be increased to 10, which is 4 times larger than that of the undoped ionic diode. In contrast, the rectification ratio of the ionic diodes with TAPP added in the PAAs hydrogel decreases to 2. In addition, the ionic diode composed of the TAPP-doped CS hydrogel and PAAs hydrogel has the characteristics of a high open-circuit voltage. The open-circuit voltage of the 10 mm × 10 mm × 4 mm heterojunction hydrogel reached 370 mV. The ionic diodes can be used as a self-powered power supply device.
Collapse
Affiliation(s)
- Yanqing Wei
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Yize Zhao
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Yue Liu
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Na Luo
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Zunchang Gao
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Pu Hou
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Yang Liu
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Yanhua Zhang
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| | - Pengfei Huo
- College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040, P. R. China
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China
| |
Collapse
|
8
|
Kang M, Lee DM, Hyun I, Rubab N, Kim SH, Kim SW. Advances in Bioresorbable Triboelectric Nanogenerators. Chem Rev 2023; 123:11559-11618. [PMID: 37756249 PMCID: PMC10571046 DOI: 10.1021/acs.chemrev.3c00301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Indexed: 09/29/2023]
Abstract
With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.
Collapse
Affiliation(s)
- Minki Kang
- School
of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon 16419, Republic
of Korea
| | - Dong-Min Lee
- School
of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon 16419, Republic
of Korea
| | - Inah Hyun
- Department
of Materials Science and Engineering, Center for Human-oriented Triboelectric
Energy Harvesting, Yonsei University, Seoul 03722, Republic of Korea
| | - Najaf Rubab
- Department
of Materials Science and Engineering, Gachon
University, Seongnam 13120, Republic
of Korea
| | - So-Hee Kim
- Department
of Materials Science and Engineering, Center for Human-oriented Triboelectric
Energy Harvesting, Yonsei University, Seoul 03722, Republic of Korea
| | - Sang-Woo Kim
- Department
of Materials Science and Engineering, Center for Human-oriented Triboelectric
Energy Harvesting, Yonsei University, Seoul 03722, Republic of Korea
| |
Collapse
|
9
|
Zhang Y, Lee G, Li S, Hu Z, Zhao K, Rogers JA. Advances in Bioresorbable Materials and Electronics. Chem Rev 2023; 123:11722-11773. [PMID: 37729090 DOI: 10.1021/acs.chemrev.3c00408] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/22/2023]
Abstract
Transient electronic systems represent an emerging class of technology that is defined by an ability to fully or partially dissolve, disintegrate, or otherwise disappear at controlled rates or triggered times through engineered chemical or physical processes after a required period of operation. This review highlights recent advances in materials chemistry that serve as the foundations for a subclass of transient electronics, bioresorbable electronics, that is characterized by an ability to resorb (or, equivalently, to absorb) in a biological environment. The primary use cases are in systems designed to insert into the human body, to provide sensing and/or therapeutic functions for timeframes aligned with natural biological processes. Mechanisms of bioresorption then harmlessly eliminate the devices, and their associated load on and risk to the patient, without the need of secondary removal surgeries. The core content focuses on the chemistry of the enabling electronic materials, spanning organic and inorganic compounds to hybrids and composites, along with their mechanisms of chemical reaction in biological environments. Following discussions highlight the use of these materials in bioresorbable electronic components, sensors, power supplies, and in integrated diagnostic and therapeutic systems formed using specialized methods for fabrication and assembly. A concluding section summarizes opportunities for future research.
Collapse
Affiliation(s)
- Yamin Zhang
- Center for Bio-Integrated Electronics, Northwestern University, Evanston, Illinois 60208, United States
- Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, Illinois 60208, United States
| | - Geumbee Lee
- Center for Bio-Integrated Electronics, Northwestern University, Evanston, Illinois 60208, United States
- Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, Illinois 60208, United States
| | - Shuo Li
- Center for Bio-Integrated Electronics, Northwestern University, Evanston, Illinois 60208, United States
- Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, Illinois 60208, United States
| | - Ziying Hu
- Center for Bio-Integrated Electronics, Northwestern University, Evanston, Illinois 60208, United States
- Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, Illinois 60208, United States
| | - Kaiyu Zhao
- Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois 60208, United States
| | - John A Rogers
- Center for Bio-Integrated Electronics, Northwestern University, Evanston, Illinois 60208, United States
- Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, Illinois 60208, United States
- Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois 60208, United States
- Department of Neurological Surgery, Feinberg School of Medicine, Northwestern University, Chicago, Illinois 60611, United States
- Department of Mechanical Engineering, Biomedical Engineering, Chemistry, Electrical Engineering and Computer Science, Northwestern University, Evanston, Illinois 60208, United States
| |
Collapse
|
10
|
Ye Y, Yu L, Lizundia E, Zhu Y, Chen C, Jiang F. Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices. Chem Rev 2023; 123:9204-9264. [PMID: 37419504 DOI: 10.1021/acs.chemrev.2c00618] [Citation(s) in RCA: 28] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/09/2023]
Abstract
Ionic conductors (ICs) find widespread applications across different fields, such as smart electronic, ionotronic, sensor, biomedical, and energy harvesting/storage devices, and largely determine the function and performance of these devices. In the pursuit of developing ICs required for better performing and sustainable devices, cellulose appears as an attractive and promising building block due to its high abundance, renewability, striking mechanical strength, and other functional features. In this review, we provide a comprehensive summary regarding ICs fabricated from cellulose and cellulose-derived materials in terms of fundamental structural features of cellulose, the materials design and fabrication techniques for engineering, main properties and characterization, and diverse applications. Next, the potential of cellulose-based ICs to relieve the increasing concern about electronic waste within the frame of circularity and environmental sustainability and the future directions to be explored for advancing this field are discussed. Overall, we hope this review can provide a comprehensive summary and unique perspectives on the design and application of advanced cellulose-based ICs and thereby encourage the utilization of cellulosic materials toward sustainable devices.
Collapse
Affiliation(s)
- Yuhang Ye
- Sustainable Functional Biomaterials Lab, Department of Wood Science, University of British Columbia, Vancouver, British Columbia V6T 1Z4, Canada
- Bioproducts Institute, The University of British Columbia, 2385 East Mall, Vancouver, British Columbia V6T 1Z4, Canada
| | - Le Yu
- School of Resource and Environmental Sciences, Hubei Biomass-Resource Chemistry and Environmental Biotechnology Key Laboratory, Wuhan University, Wuhan 430079, P. R. China
| | - Erlantz Lizundia
- Life Cycle Thinking Group, Department of Graphic Design and Engineering Projects, Faculty of Engineering in Bilbao University of the Basque Country (UPV/EHU), Bilbao 48013, Spain
- BCMaterials Lab, Basque Center for Materials, Applications and Nanostructures, Leioa 48940, Spain
| | - Yeling Zhu
- Sustainable Functional Biomaterials Lab, Department of Wood Science, University of British Columbia, Vancouver, British Columbia V6T 1Z4, Canada
- Bioproducts Institute, The University of British Columbia, 2385 East Mall, Vancouver, British Columbia V6T 1Z4, Canada
| | - Chaoji Chen
- School of Resource and Environmental Sciences, Hubei Biomass-Resource Chemistry and Environmental Biotechnology Key Laboratory, Wuhan University, Wuhan 430079, P. R. China
| | - Feng Jiang
- Sustainable Functional Biomaterials Lab, Department of Wood Science, University of British Columbia, Vancouver, British Columbia V6T 1Z4, Canada
- Bioproducts Institute, The University of British Columbia, 2385 East Mall, Vancouver, British Columbia V6T 1Z4, Canada
| |
Collapse
|
11
|
Dong K, Liu Y, Chen Z, Lv T, Tang W, Cao S, Chen T. A novel bilayer heterogeneous poly(ionic liquid) electrolyte for high-performance flexible supercapacitors with ultraslow self-discharge. MATERIALS HORIZONS 2023. [PMID: 37185996 DOI: 10.1039/d3mh00198a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Flexible supercapacitors with high power density and long cyclic stability represent a promising candidate to be used as power supplies for portable electronics, but often suffer from the disadvantages of a limited working voltage and rapid self-discharge (spontaneous drop of open-circuit voltage). Here, we design a bilayer heterogeneous poly(ionic liquid) electrolyte (BHPE) consisting of a polycation complex and a polyanion complex with different zeta potentials to suppress the self-discharge of flexible symmetric supercapacitors. The resultant BHPE-based supercapacitors using active carbon/carbon nanotube composite electrodes exhibit a high working potential of 3.0 V and an energy density of 33 W h kg-1, which are comparable with those of devices obtained by using a homogeneous poly(ionic liquid) electrolyte (HPE). More significantly, the developed BHPE-based supercapacitor charged under forward bias exhibits a self-discharge time of 23.2 h, which is at least twice that of the device charged under reverse bias and is also much superior to those of HPE-based supercapacitors. The BHPE-based supercapacitors also possess excellent mechanical flexibility and stability, due to the stabilized interface contact between two layers of poly(ionic liquid)s.
Collapse
Affiliation(s)
- Keyi Dong
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| | - Yanan Liu
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| | - Zilin Chen
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| | - Tian Lv
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| | - Weiyang Tang
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| | - Shaokui Cao
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, China
| | - Tao Chen
- Shanghai Key Lab of Chemical Assessment and Sustainability, School of Chemical Science and Engineering, Tongji University, Shanghai 200092, P. R. China.
| |
Collapse
|
12
|
Kumar Y, Dubey M. Soft Ionic Diode Fabricated Using Asymmetric Ion Distribution in Li +-Zn(II)/Cu(II) Metallohydrogels. ACS APPLIED MATERIALS & INTERFACES 2023; 15:11970-11976. [PMID: 36820648 DOI: 10.1021/acsami.2c17950] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
The development of metal ions-incorporated soft materials is of great importance in the present scenario due to their essential requirement in the fabrication of the components such as ionic diodes and electrochemical transistors for soft electronic devices. In the current work, to fabricate a soft ionic diode, two distinct Li+-driven conductive metallohydrogels, namely, MG-Zn and MG-Cu, have been obtained by individually treating a LiOH deprotonated pregelator (H5APL) with Zn(OAc)2 or Cu(OAc)2. The pregelator and metallohydrogels have been well characterized by using various instrumental techniques, which supports their proposed formulations. Field emission scanning electron microscopic images of metallohydrogels reveal the presence of a fibrous network, which helps to create a gel matrix, whereas the rheological experimental results ascertain the true gel phase nature of the synthesized metallohydrogels. The obtained MG-Zn and MG-Cu metallohydrogels were subjected to electrochemical impedance spectroscopic and band gap measurements. The MG-Zn and MG-Cu showed ionic conductivities of 1.02 × 10-3 and 1.14 × 10-3 S/cm, along with band gaps of 2.82 and 2.85 eV, respectively, thus claiming their suitability for device fabrication. Further, the fabricated metallohydrogel-based ionic diode shows appreciable ability to rectify the ionic current with the forward and reverse bias currents of 19 and 1.9 mA at +/-4 V bias potential. Based on all the experimental results, the mechanism has been well established for the rectification behavior in the fabricated metallohydrogel ionic diode.
Collapse
Affiliation(s)
- Yeeshu Kumar
- Soft Materials Research Laboratory, Department of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552, India
| | - Mrigendra Dubey
- Soft Materials Research Laboratory, Department of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552, India
| |
Collapse
|
13
|
Berangi M, Kuehne A, Waiczies H, Niendorf T. MRI of Implantation Sites Using Parallel Transmission of an Optimized Radiofrequency Excitation Vector. Tomography 2023; 9:603-620. [PMID: 36961008 PMCID: PMC10037644 DOI: 10.3390/tomography9020049] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2023] [Revised: 03/03/2023] [Accepted: 03/05/2023] [Indexed: 03/25/2023] Open
Abstract
Postoperative care of orthopedic implants is aided by imaging to assess the healing process and the implant status. MRI of implantation sites might be compromised by radiofrequency (RF) heating and RF transmission field (B1+) inhomogeneities induced by electrically conducting implants. This study examines the applicability of safe and B1+-distortion-free MRI of implantation sites using optimized parallel RF field transmission (pTx) based on a multi-objective genetic algorithm (GA). Electromagnetic field simulations were performed for eight eight-channel RF array configurations (f = 297.2 MHz), and the most efficient array was manufactured for phantom experiments at 7.0 T. Circular polarization (CP) and orthogonal projection (OP) algorithms were applied for benchmarking the GA-based shimming. B1+ mapping and MR thermometry and imaging were performed using phantoms mimicking muscle containing conductive implants. The local SAR10g of the entire phantom in GA was 12% and 43.8% less than the CP and OP, respectively. Experimental temperature mapping using the CP yielded ΔT = 2.5-3.0 K, whereas the GA induced no extra heating. GA-based shimming eliminated B1+ artefacts at implantation sites and enabled uniform gradient-echo MRI. To conclude, parallel RF transmission with GA-based excitation vectors provides a technical foundation en route to safe and B1+-distortion-free MRI of implantation sites.
Collapse
Affiliation(s)
- Mostafa Berangi
- Berlin Ultrahigh Field Facility, Max-Delbrück-Center for Molecular Medicine in the Helmholtz Association, 13125 Berlin, Germany
- Charité-Universitätsmedizin Berlin, 10117 Berlin, Germany
- MRI.TOOLS GmbH, 13125 Berlin, Germany
| | | | | | - Thoralf Niendorf
- Berlin Ultrahigh Field Facility, Max-Delbrück-Center for Molecular Medicine in the Helmholtz Association, 13125 Berlin, Germany
- Charité-Universitätsmedizin Berlin, 10117 Berlin, Germany
- MRI.TOOLS GmbH, 13125 Berlin, Germany
| |
Collapse
|
14
|
Nyamayaro K, Mehrkhodavandi P, Hatzikiriakos SG. Impact of counterion valency on the rheology of sulfonated cellulose nanocrystal hydrogels. Carbohydr Polym 2023; 302:120378. [PMID: 36604056 DOI: 10.1016/j.carbpol.2022.120378] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2022] [Revised: 11/16/2022] [Accepted: 11/18/2022] [Indexed: 11/25/2022]
Abstract
A systematic rheological study on the influence of valency of different counterions on the properties of CNC hydrogels was carried out. Rheo-polarized microscopy was used to prove that preshear of 500 s-1 for 1 min is adequate to completely breakdown agglomerates in the suspension. Furthermore, a rest period of 30 min is sufficient to recover the equilibrium structure of hydrogels. Changing counterions from monovalent (Na+, K+, Li+), to divalent (Mg2+, Ca2+) and to trivalent (Al3+) influenced the network formation. CNC suspensions with monovalent counterions are isotropic at 3 wt%, anisotropic with chiral nematic structures at 5 wt% and form birefringent gels at 7 wt%. Conversely, divalent and trivalent counterions facilitate network formation, leading to gel like behavior at all concentrations. Sonication of CNC samples with monovalent counterions lowers the viscosity by two orders of magnitude while the opposite is true for multivalent counterions due to the formation of strong networks. The varying rheological properties displayed from CNCs with different counter ions may influence the use of CNC as rheological modifiers in fluid-based applications.
Collapse
Affiliation(s)
- Kudzanai Nyamayaro
- Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, BC, Canada; Department of Chemistry, University of British Columbia, Vancouver, BC, Canada
| | | | - Savvas G Hatzikiriakos
- Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, BC, Canada.
| |
Collapse
|
15
|
He X, Lu Q. Design and fabrication strategies of cellulose nanocrystal-based hydrogel and its highlighted application using 3D printing: A review. Carbohydr Polym 2022; 301:120351. [DOI: 10.1016/j.carbpol.2022.120351] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/13/2022] [Revised: 10/30/2022] [Accepted: 11/11/2022] [Indexed: 11/18/2022]
|
16
|
Pradhan D, Jaiswal AK, Jaiswal S. Emerging technologies for the production of nanocellulose from lignocellulosic biomass. Carbohydr Polym 2022; 285:119258. [DOI: 10.1016/j.carbpol.2022.119258] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2021] [Revised: 01/31/2022] [Accepted: 02/11/2022] [Indexed: 12/11/2022]
|
17
|
Jia M, Luo L, Rolandi M. Correlating Ionic Conductivity and Microstructure in Polyelectrolyte Hydrogels for Bioelectronic Devices. Macromol Rapid Commun 2022; 43:e2100687. [PMID: 35020249 DOI: 10.1002/marc.202100687] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2021] [Revised: 12/13/2021] [Indexed: 11/05/2022]
Abstract
Hydrogels have become the material of choice in bioelectronic devices because their high-water content leads to efficient ion transport and a conformal interface with biological tissue. While the morphology of hydrogels has been thoroughly studied, systematical studies on their ionic conductivity is less common. Here, we present an easy-to-implement strategy to characterize the ionic conductivity of a series of polyelectrolyte hydrogels with different amounts of monomer and crosslinker and correlate their ionic conductivity with microstructure. Higher monomer increases the ionic conductivity of the polyelectrolyte hydrogel due to the increased charge carrier density, but also leads to excessive swelling that may cause device failure upon integration with bioelectronic devices. Increasing the amount of crosslinker can reduce the swelling ratio by increasing the crosslinking density and reducing the mesh size of the hydrogel, which cuts down the ionic conductivity. Further investigation on the porosity and tortuosity of the swollen hydrogels correlates the microstructure with the ionic conductivity. These results are generalizable for various polyelectrolyte hydrogel systems with other ions as the charge carrier and provide a facile guidance to design polyelectrolyte hydrogel with desired ionic conductivity and microstructure for applications in bioelectronic devices. This article is protected by copyright. All rights reserved.
Collapse
Affiliation(s)
- Manping Jia
- M. Jia, L. Luo, M. Rolandi, Department of Electrical and Computer Engineering, University of California Santa Cruz, Santa Cruz, California, 95064, USA
| | - Le Luo
- M. Jia, L. Luo, M. Rolandi, Department of Electrical and Computer Engineering, University of California Santa Cruz, Santa Cruz, California, 95064, USA
| | - Marco Rolandi
- M. Jia, L. Luo, M. Rolandi, Department of Electrical and Computer Engineering, University of California Santa Cruz, Santa Cruz, California, 95064, USA
| |
Collapse
|
18
|
Ivanov AS, Pershina LV, Nikolaev KG, Skorb EV. Recent Progress of Layer-by-layer Assembly, Free-Standing Film and Hydrogel Based on Polyelectrolytes. Macromol Biosci 2021; 21:e2100117. [PMID: 34272830 DOI: 10.1002/mabi.202100117] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2021] [Revised: 06/10/2021] [Indexed: 12/29/2022]
Abstract
Nowadays, polyelectrolytes play an essential role in the development of new materials. Their use allows creating new properties of materials and surfaces and vary them in a wide range. Basically, modern methods are divided into three areas-the process of layer-by-layer deposition, free-standing films, and hydrogels based on polyelectrolytes. Layer-by-layer assembly of polyelectrolytes on various surfaces is a powerful technique. It allows giving surfaces new properties, for example, protect them from corrosion. Free-standing films are essential tools for the design of membranes and sensors. Hydrogels based on polyelectrolytes have recently shown their applicability in electrical and materials science. The creation of new materials and components with controlled properties can be achieved using polyelectrolytes. This review focuses on new technologies that have been developed with polyelectrolytes over the last five years.
Collapse
Affiliation(s)
- Artemii S Ivanov
- Infochemistry Scientific Center of ITMO University, Lomonosova str. 9, Saint Petersburg, 191002, Russia
| | - Lyubov V Pershina
- Infochemistry Scientific Center of ITMO University, Lomonosova str. 9, Saint Petersburg, 191002, Russia
| | - Konstantin G Nikolaev
- Infochemistry Scientific Center of ITMO University, Lomonosova str. 9, Saint Petersburg, 191002, Russia
| | - Ekaterina V Skorb
- Infochemistry Scientific Center of ITMO University, Lomonosova str. 9, Saint Petersburg, 191002, Russia
| |
Collapse
|