Vacuum Dual-Source Thermal-Deposited Lead-Free Cs3Cu2I5 Films with High Photoluminescence Quantum Yield for Deep-Blue Light-Emitting Diodes

Thermally Evaporated Metal Halide Perovskites and Their Analogues: Film Fabrication, Applications and Beyond

Metal halide perovskites emerge as promising semiconductors for optoelectronic devices due to ease of fabrication, attractive photophysical properties, their low cost, highly tunable material properties, and high performance. High-quality thin films of metal halide perovskites are the basis of most of these applications including solar cells, light-emitting diodes, photodetectors, and electronic memristors. A typical fabrication method for perovskite thin films is the solution method, which has several limitations in device reproducibility, adverse environmental impact, and utilization of raw materials. Thermal evaporation holds great promise in addressing these bottlenecks in fabricating high-quality halide perovskite thin films. It also has high compatibility with mass-production platforms that are well-established in industries. This review first introduces the basics of the thermal evaporation method with a particular focus on the critical parameters influencing the thin film deposition. The research progress of the fabrication of metal halide perovskite thin films is further summarized by different thermal evaporation approaches and their applications in solar cells and other optoelectronic devices. Finally, research challenges and future opportunities for both fundamental research and commercialization are discussed.

Alkylammonium Halides for Phase Regulation and Luminescence Modulation of Cesium Copper Iodide Nanocrystals for Light-Emitting Diodes

All-inorganic cesium copper halide nanocrystals have attracted extensive attention due to their cost-effectiveness, low toxicity, and rich luminescence properties. However, controlling the synthesis of these nanocrystals to achieve a precise composition and high luminous efficiency remains a challenge that limits their future application. Herein, we report the effect of oleylammonium iodide on the synthesis of copper halide nanocrystals to control the composition and phase and modulate their photoluminescence (PL) quantum yields (QYs). For CsCu2I3, the PL peak is centered at 560 nm with a PLQY of 47.3%, while the PL peak of Cs3Cu2I5 is located at 440 nm with an unprecedently high PLQY of 95.3%. Furthermore, the intermediate-state CsCu2I3/Cs3Cu2I5 heterostructure shows white light emission with a PLQY of 66.4%, chromaticity coordinates of (0.3176, 0.3306), a high color rendering index (CRI) of 90, and a correlated color temperature (CCT) of 6234 K, indicating that it is promising for single-component white-light-emitting applications. The nanocrystals reported in this study have excellent luminescence properties, low toxicity, and superior stability, so they are more suitable for future light-emitting applications.

Mapping Uncharted Lead-Free Halide Perovskites and Related Low-Dimensional Structures

Research on perovskites has grown exponentially in the past decade due to the potential of methyl ammonium lead iodide in photovoltaics. Although these devices have achieved remarkable and competitive power conversion efficiency, concerns have been raised regarding the toxicity of lead and its impact on scaling up the technology. Eliminating lead while conserving the performance of photovoltaic devices is a great challenge. To achieve this goal, the research has been expanded to thousands of compounds with similar or loosely related crystal structures and compositions. Some materials are "re-discovered", and some are yet unexplored, but predictions suggest that their potential applications may go beyond photovoltaics, for example, spintronics, photodetection, photocatalysis, and many other areas. This short review aims to present the classification, some current mapping strategies, and advances of lead-free halide double perovskites, their derivatives, lead-free perovskitoid, and low-dimensional related crystals.

Highly Sensitive H2S Gas Sensor Based on a Lead-Free CsCu2I3 Perovskite Film at Room Temperature

Recently, there have been reports of lead halide perovskite-based sensors demonstrating their potential for gas sensing applications. However, the toxicity of lead and the instability of lead-based perovskites have limited their applications. This study addressed this issue by developing a H2S gas sensor based on a lead-free CsCu2I3 film prepared using a one-step CVD method. The sensor demonstrated excellent sensing properties, including a high response and selectivity toward H2S, even at low concentrations (0.2 ppm) at room temperature. Furthermore, a reasonable sensing mechanism was proposed. It is suggested that the sensing mechanism sheds light on the role of defects in perovskite materials, the impact of H2S as an electron donor, and the occurrence of reversible chemical reactions. These findings suggest that lead-free CsCu2I3 has great potential in the field of H2S gas sensing.

Recent Advances and Opportunities of Eco-Friendly Ternary Copper Halides: A New Superstar in Optoelectronic Applications

Recently, the newly-emerging lead-free metal-halide materials with less toxicity and superior optoelectronic properties have received wide attention as the safer and potentially more robust alternatives to lead-based perovskite counterparts. Among them, ternary copper halides (TCHs) have become a vital group due to their unique features, including abundant structural diversity, ease of synthesis, unprecedented optoelectronic properties, high abundance, and low cost. Although the recent efforts in this field have made certain progresses, some scientific and technological issues still remain unresolved. Herein, a comprehensive and up-to-date overview of recent progress on the fundamental characteristics of TCH materials and their versatile applications is presented, which contains topics such as: i) crystal and electronic structure features and synthesis strategies; ii) mechanisms of self-trapped excitons, luminescence regulation, and environmental stability; and iii) their burgeoning optoelectronic devices of phosphor-converted white light-emitting diodes (WLEDs), electroluminescent LEDs, anti-counterfeiting, X-ray scintillators, photodetectors, sensors, and memristors. Finally, the current challenges together with future perspectives on the development of TCH materials and applications are also critically described, which is considered to be critical for accelerating the commercialization of these rapidly evolving technologies.

Tautomeric mixture coordination enables efficient lead-free perovskite LEDs

Lead halide perovskite light-emitting diodes (PeLEDs) have demonstrated remarkable optoelectronic performance1-3. However, there are potential toxicity issues with lead4,5 and removing lead from the best-performing PeLEDs-without compromising their high external quantum efficiencies-remains a challenge. Here we report a tautomeric-mixture-coordination-induced electron localization strategy to stabilize the lead-free tin perovskite TEA2SnI4 (TEAI is 2-thiopheneethylammonium iodide) by incorporating cyanuric acid. We demonstrate that a crucial function of the coordination is to amplify the electronic effects, even for those Sn atoms that aren't strongly bonded with cyanuric acid owing to the formation of hydrogen-bonded tautomeric dimer and trimer superstructures on the perovskite surface. This electron localization weakens adverse effects from Anderson localization and improves ordering in the crystal structure of TEA2SnI4. These factors result in a two-orders-of-magnitude reduction in the non-radiative recombination capture coefficient and an approximately twofold enhancement in the exciton binding energy. Our lead-free PeLED has an external quantum efficiency of up to 20.29%, representing a performance comparable to that of state-of-the-art lead-containing PeLEDs6-12. We anticipate that these findings will provide insights into the stabilization of Sn(II) perovskites and further the development of lead-free perovskite applications.

Room-Temperature Solid-State Synthesis of Cs3Cu2I5 Thin Films and Formation Mechanism for Its Unique Local Structure

Blue-emitting Cs₃Cu₂I₅ has attracted attention owing to its near-unity PL quantum yield and applications in DUV photodetectors and scintillators. Its PL properties originate from the unique local structure around the luminescent center, the [Cu₂I₅]^3- polyhedron iodocuprate anion consisting of the edge-shared CuI₃ triangle and the CuI₄ tetrahedron dimer, which is isolated by Cs⁺ ions. We found that solid-state reactions between CsI and CuI occur near room temperature (RT) to form Cs₃Cu₂I₅ and/or CsCu₂I₃ phases. High-quality thin films of these phases were obtained by the sequential deposition of CuI and CsI by thermal evaporation. We elucidated that the formation of interstitial Cu⁺ and the antisite of I^- at the Cs⁺ site in the CsI crystal through Cu⁺ and I^- diffusion results in the RT synthesis of Cs₃Cu₂I₅. The unique structure formation of the luminescent center was revealed using a model based on the low packing density of the CsCl-type crystal structure, similar sizes of Cs⁺ and I^- ions, and the high diffusivity of Cu⁺. The self-aligned patterning of the luminous regions on thin films was demonstrated.

Advances in electrically driven light-emitting diodes based on lead-free metal halides

The emerging lead halide perovskites show great potential for their use as emitters in electrically driven light-emitting diodes (LEDs) with external quantum efficiency (EQE) over 25%. While the toxicity of lead and inferior device stability are the main obstacles for their commercialization, replacing Pb²⁺ with low- or non-toxic metal ions to form low- or zero-dimensional structures provides an alternative approach to effectively tackle these issues. Recently, luminescent lead-free metal halides have been increasingly developed toward eco-friendly and highly efficient electroluminescence. In this feature article, we give a brief overview of recent advances in luminescent lead-free metal halides and their applications in electrically driven LEDs. The challenges and prospects in this field are outlined at the end.

Light Emission of Self-Trapped Excitons in Inorganic Metal Halides for Optoelectronic Applications

Self-trapped excitons (STEs) have recently attracted tremendous interest due to their broadband emission, high photoluminescence quantum yield, and self-absorption-free properties, which enable a large range of optoelectronic applications such as lighting, displays, radiation detection, and special sensors. Unlike free excitons, the formation of STEs requires strong coupling between excited state excitons and the soft lattice in low electronic dimensional materials. The chemical and structural diversity of metal halides provides an ideal platform for developing efficient STE emission materials. Herein, an overview of recent progress on STE emission materials for optoelectronic applications is presented. The relationships between the fundamental emission mechanisms, chemical compositions, and device performances are systematically reviewed. On this basis, currently existing challenges and possible development opportunities in this field are presented.

Cryogenic Scintillation Properties of Lead-Free Cs3Cu2I5 Single Crystals

Perovskite scintillators have become increasingly popular in recent years because of their simple production and high sensitivity to X-ray. Due to large Stokes shifts, high light yield, eco-friendly fabrication, and good stability, the lead-free Cu-based perovskites have gained much attention. In this paper, we prepared the Cs₃Cu₂I₅ single crystals (SCs) by the solution-processed method. At room temperature, we measured the emission band at 440 nm with an average decay time of 595 ns under X-ray excitation. Under ¹³⁷Cs γ-ray excitation, we determined that the light yield of Cs₃Cu₂I₅ SCs was 23 000 photons/MeV. Notably, under alpha particle excitation by ²⁴¹Am, the light yield of Cs₃Cu₂I₅ SCs is approximately 3.2 times higher than that of the commercial scintillator LYSO(Ce). In addition, we systematically investigated the cryogenic scintillation properties of Cs₃Cu₂I₅ SCs at the temperature range of 60-300 K. With decreasing temperature, the intensity of the emission band at 440 nm significantly increases, and an additional emission band at 336 nm emerges below 100 K. Meanwhile, the temperature-dependent decay times were determined. The fast and slow decay time of Cs₃Cu₂I₅ SCs are estimated to be 221 and 1193 ns, respectively, at 60 K. Our findings highlight the great potential for Cs₃Cu₂I₅ SCs to be a cryogenic scintillator.

Epitaxial Growth of Lead-Free 2D Cs3 Cu2 I5 Perovskites for High-Performance UV Photodetectors

The all-inorganic lead-free Cu-based halide perovskites represented by the Cs-Cu-I system, have sparked extensive interest recently due to their impressive photophysical characteristics. However, successive works on their potential application in light emission diodes and photodetectors rely on tiny polycrystals, in which the grain boundaries and defects may lead to the performance degradation of their embodied devices. Here, 2D all-inorganic perovskite Cs₃ Cu₂ I₅ single crystals are epitaxially grown on mica substrates, with a thickness down to 10 nm. The strong blue emission of the Cs₃ Cu₂ I₅ flakes may originate from the radiative transition of self-trapped excitons associated with a large Stocks shift and long (microsecond) decay time. Ultravioelt (UV) photodetectors based on individual Cs₃ Cu₂ I₅ nanosheets are fabricated via a swift and etching-free dry transfer approach, which reveal a high responsivity of 3.78 A W^-1 (270 nm, 5 V bias), as well as a fast response speed (τ_rise  ≈163 ms, τ_decay  ≈203 ms), outperforming congeneric UV sensors based on other 2D metal halide perovskites. This work therefore sheds light on the fabrication of green optoelectronic devices based on lead-free 2D perovskites, vital for the sustainable development of photoelectric technology.

Ion Migration in Perovskite Light-Emitting Diodes: Mechanism, Characterizations, and Material and Device Engineering

In recent years, perovskite light-emitting diodes (PeLEDs) have emerged as a promising new lighting technology with high external quantum efficiency, color purity, and wavelength tunability, as well as, low-temperature processability. However, the operational stability of PeLEDs is still insufficient for their commercialization. The generation and migration of ionic species in metal halide perovskites has been widely acknowledged as the primary factor causing the performance degradation of PeLEDs. Herein, this topic is systematically discussed by considering the fundamental and engineering aspects of ion-related issues in PeLEDs, including the material and processing origins of ion generation, the mechanisms driving ion migration, characterization approaches for probing ion distributions, the effects of ion migration on device performance and stability, and strategies for ion management in PeLEDs. Finally, perspectives on remaining challenges and future opportunities are highlighted.

Gel permeation chromatography process for highly oriented Cs3Cu2I5 nanocrystal film

The emergence of green materials has attracted considerable attention in the field of optoelectronics. Copper-based lead-free metal halide (with a near-unity quantum yield) obtained from Cs₃Cu₂I₅ nanocrystals (NCs) can exhibit blue emission with a wavelength of 440 nm and provide outstanding stability for various applications. However, in practical applications, colloidal dispersion purity and film quality are inadequate toward a high-performance device. In this study, antisolvent-free gel permeation chromatography is used to purify Cs₃Cu₂I₅ NCs. The purified Cs₃Cu₂I₅ NCs exhibit a high photoluminescent quantum yield and provide a highly oriented single-crystal film. Density functional theory calculation results indicate that the iodide-rich surface in the NCs makes them highly stable. In addition, it has been demonstrated for the first time that the mixture of polymethyl methacrylate (PMMA) and Cs₃Cu₂I₅ NCs has waterproofing capabilities. The composite film consisting of Cs₃Cu₂I₅ NCs and PMMA can survive in water for several days. This result opens up more possibilities for the application of these green material.

Low Barrier for Exciton Self-Trapping Enables High Photoluminescence Quantum Yield in Cs3Cu2I5

The metal halide Cs₃Cu₂I₅ displays anomalous optical properties: an optical absorption onset in the ultraviolet region (∼ 330 nm) with highly efficient luminescence in the blue region (∼ 445 nm). Although self-trapped exciton formation has been proposed as the origin of giant Stokes shift, its connection to the photoluminescence quantum yield exceeding 90% remains unknown. Here, we explore the photochemistry of Cs₃Cu₂I₅ from first-principles and reveal a low energy barrier for exciton self-trapping associated with Cu-Cu dimerization. Kinetic analysis shows that the quantum yield of blue emission in Cs₃Cu₂I₅ is sensitive to the excited carrier density due to the competition between exciton self-trapping and band-to-band radiative recombination.

Highly Transparent, Dual-Color Emission, Heterophase Cs3Cu2I5/CsCu2I3 Nanolayer for Transparent Luminescent Solar Concentrators

Transparent luminescent solar concentrators (TLSCs) have been attracting wide attentions for their applications in transparent photovoltaic (PV) windows, smart greenhouses, and mobile electronics on account of the simple architecture and low-cost preparation. We report a novel strategy to fabricate TLSCs using the heterophase lead-free perovskites. The heterophase nanolayered films which combined CsCu₂I₃ and Cs₃Cu₂I₅ were prepared in one step using a dual-source coevaporation technique. The CsCu₂I₃/Cs₃Cu₂I₅ films exhibited UV light absorption, a high average visible transmission (AVT) of 86.70%, and dual-color white emission between 350 and 760 nm. Importantly, the TLSCs incorporated with the CsCu₂I₃/Cs₃Cu₂I₅ films exhibited an impressive optical conversion efficiency of 1.15% under keeping a high AVT of 86.70%. Meanwhile, the TLSCs incorporated with the heterophase films showed considerable stability under ambient conditions. The CIE 1960 color coordinates (0.2082, 0.4680) of the TLSCs incorporated with the CsCu₂I₃/Cs₃Cu₂I₅ films showed excellent aesthetic quality as compared with those of the TLSCs incorporated with lead-based perovskites. Our finding offers a strategy to prepare lead-free metal halides toward high-performance TLSCs and future transparent PV windows.

One-step synthesis of fluorescence-enhanced carbon dots for Fe (III) on-off-on sensing, bioimaging and light-emitting devices

Carbon quantum dots (CDs), as one of the most potential fluorescent sensing materials, have attracted lots of attention in recent years. However, the low quantum yields, complicated separation and purification procedures have limited its application and large-scale production. In this paper, a facile and universal method was successfully developed to synthesize CDs-silica (SiO₂) spheres composites (CS composites), which not only demonstrates 10-fold fluorescence enhancement compared with single CDs but also enables the purification with a simple centrifugation step. Meanwhile, fabricated composites also presented superior photoluminescence (PL) stability and high PL intensity, even in some tough environments such as acid/alkali aqueous solution, high/low temperature, and high ion concentration aqueous solution. This simple, fast, low-cost, and efficient synthesis method would potentially expand the application of CDs for clinical analysis, optical sensing (ferric ion (Fe³⁺) and pyrophosphate), bioimaging and light-emitting diodes (LEDs).