Electrostatic Interaction-Controlled Formation of Pickering Emulsion for Continuous Flow Catalysis

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

Natural product of angelica essential oil developed as a stable Pickering emulsion for joint interface lubrication

Development of high-performance joint injection lubricants has become the focus in the field of osteoarthritis treatment. Herein, natural product of angelica essential oil combined with the graphene oxide were prepared to the stable Pickering emulsion as a biological lubricant. The tribological properties of the Pickering emulsion under different friction conditions were studied. The lubricating mechanism was revealed and the biological activities were evaluated. Results showed that the prepared Pickering emulsion displayed superior lubrication property at the Ti6Al4V biological material interface. The maximum friction reduction and anti-wear abilities of the Pickering emulsion were improved by 36% and 50% compared to water, respectively. This was primarily due to the action of the double-layer lubrication films composed of the graphene oxide and angelica essential oil molecules. It was worth noting that the friction reduction effect of the Pickering emulsion at the natural cartilage interface was higher about 19% than that of HA used in clinic for OA commonly. In addition, the Pickering emulsion also displayed antioxidant activity and cell biocompatibility, showing a good clinical application prospect in the future.

Ultralight, Robust, Thermal Insulating Silica Nanolace Aerogels Derived from Pickering Emulsion Templates

Synthesis of silica aerogel insulators with ultralight weight and strong mechanical properties using a simplified technique remains challenging for functional soft materials. This study introduces a promising method for the fabrication of mechanically reinforced ultralight silica aerogels by employing attractive silica nanolace (ASNLs)-armored Pickering emulsion templates. For this, silica nanolaces (SiNLs) are fabricated by surrounding a cellulose nanofiber with necklace-shaped silica nanospheres. In order to achieve amphiphilicity, which is crucial for the stabilization of oil-in-water Pickering emulsions, hydrophobic alkyl chains and hydrophilic amine groups are grafted onto the surface of SiNLs by silica coupling reactions. Freeze-drying of ASNLs-armored Pickering emulsions has established a new type of aerogel system. The ASNLs-supported mesoporous aerogel shows 3-fold greater compressive strength, 4-fold reduced heat transfer, and a swift heat dissipation profile compared to that of the bare ASNL aerogel. Additionally, the ASNL aerogel achieves an ultralow density of 8 mg cm-3, attributed to the pore architecture generated from closely jammed emulsion drops. These results show the potential of the ASNL aerogel system, which is ultralight, mechanically stable, and thermally insulating and could be used in building services, energy-saving technologies, and the aerospace industry.

Ultrastable High Internal Phase Pickering Emulsions: Forming Mechanism, Processability, and Application in 3D Printing

High internal phase Pickering emulsions (HIPPEs) are versatile platforms for various applications owing to their low-density, solid-like structure, and large specific surface area. Here, naturally occurring polysaccharide-protein hybrid nanoparticles (PPH NPs) were used to stabilize HIPPEs with an internal phase fraction of 80% at a PPH NP concentration of 1.5%. The obtained HIPPEs displayed a gel-like behavior with excellent stability against centrifugation (10000g, 10 min), temperature (4-121 °C), pH (1.0-11.0), and ionic strength (0-500 mM). Confocal laser scanning microscope and cryo-scanning electron microscopy results showed that PPH NPs contributed to the stability of HIPPEs by effectively adsorbing and anchoring on the surface of the emulsion droplets layer by layer to form a dense 3D network barrier to inhibit droplet coalescence. The rheological analysis showed that the HIPPEs possessed a higher viscosity and lower frequency dependence with increasing PPH NP concentration, suggesting the potential application of such HIPPEs in three-dimensional (3D) printing, which was subsequently confirmed by a 3D printing experiment. This work provides highly stable and processable HIPPEs, which can be developed as facile and reusable materials for numerous applications. They can also be directly used for future food manufacturing, drug and nutrient delivery, and tissue reconstruction.

Factors that affect Pickering emulsions stabilized by mesoporous hollow silica microspheres

HYPOTHESIS

Classical (solid particles stabilized) Pickering emulsions have been widely studied due to the irreversible adsorption of solid particles at the oil-water interface. Mesoporous hollow silica microspheres (MHSMs) are promising stabilizers for Pickering emulsion owing to its larger specific surface area and lower apparent density. However, this type of Pickering emulsion has not attracted enough attention. The stabilization mechanism of Pickering emulsion by MHSMs has not been studied in detail yet.

EXPERIMENTS

Herein, stable Pickering emulsions were prepared using only MHSMs as stabilizers. In order to investigate its stabilization mechanism, the effect factors of size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio on the stability of Pickering emulsions were analyzed deeply.

FINDINGS

As a result, the stability of Pickering emulsion can be improved by MHSMs with smaller particle size and shell thickness. Also, MHSMs with the intermediate hydrophobicity and suitable oil/water ratio actually do favour for the stability of Pickering emulsion. As expected, the stability of Pickering emulsion can be enhanced by increasing the concentration of MHSMs in a certain range. The Pickering emulsions tend to achieve excellent stable state when the concentration of MHSMs is 1.25 mg/mL. All those results suggested that the stability of Pickering emulsions correlates directly to particle size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio. This research paves a way for the fabrication of functional materials via Pickering emulsions.

Recent advances in the design and use of Pickering emulsions for wastewater treatment applications

Pickering emulsions have recently emerged as versatile systems capable of targeting many applications of wastewater treatment. The unique properties, which include high emulsion stability, easy preparation, low toxicity, and stimuli-responsiveness, pave the way for advances in common pollutant control processes. This review aims to provide a comprehensive overview on different aspects in the Pickering emulsion design focusing on the key structural relations and their implications in specific applications. The first section is dedicated to the critical parameters governing the Pickering emulsion type, droplet size and stability. Furthermore, a section describing methods for demulsification and particle recovery is included, in which various stimuli have been explored. Finally, the most potent applications of Pickering emulsions such as photocatalytic degradation, adsorption, extraction, and separation of common wastewater pollutants are presented and discussed with a great deal of attention towards the efficacy, current limitations, and future potential. Recognizing the rise of innovative Pickering emulsion solutions is expected to induce profound effects facilitating the technology transfer to industrial processes.

Facile Synthesis and Environmental Applications of Noble Metal-Based Catalytic Membrane Reactors

Noble metal nanoparticle-loaded catalytic membrane reactors (CMRs) have emerged as a promising method for water decontamination. In this study, we proposed a convenient and green strategy to prepare gold nanoparticle (Au NPs)-loaded CMRs. First, the redox-active substrate membrane (CNT-MoS2) composed of carbon nanotube (CNT) and molybdenum disulfide (MoS2) was prepared by an impregnation method. Water-diluted Au(III) precursor (HAuCl4) was then spontaneously adsorbed on the CNT-MoS2 membrane only through filtration and reduced into Au(0) nanoparticles in situ, which involved a “adsorption–reduction” process between Au(III) and MoS2. The constructed CNT-MoS2@Au membrane demonstrated excellent catalytic activity and stability, where a complete 4-nitrophenol transformation can be obtained within a hydraulic residence time of <3.0 s. In addition, thanks to the electroactivity of CNT networks, the as-designed CMR could also be applied to the electrocatalytic reduction of bromate (>90%) at an applied voltage of −1 V. More importantly, by changing the precursors, one could further obtain the other noble metal-based CMR (e.g., CNT-MoS2@Pd) with superior (electro)catalytic activity. This study provided new insights for the rational design of high-performance CMRs toward various environmental applications.

Viscoelastic Behavior of Crude Oil-Gum Emulsions in Enhanced Oil Recovery

The experimental study of the Creep-recovery examination is necessary to understand the viscoelastic behavior of crude oil-Xanthan gum emulsions. The experimental measurements and analysis of these tests were completed using RheoStress RS100 under controlled stress CS-mode. Rheometers with CS-mode allow for a useful and direct technique for the experimental measurements of creep and recovery stages. This investigation covers a wide range of crude oil concentration of 0–75% by volume, Xanthan concentration range of 0–10⁴ ppm, and two types of Xanthan gums are used and investigated. The creep-recovery measurements of crude oil-Xanthan gums emulsions were extensively investigated. It was important to find the linear viscoelastic range for the examined crude oil-Xanthan gum emulsions. The experimental measurements and analysis of the creep-recovery examinations showed that the linear viscoelastic range was up to 1 Pa. The experimental investigation showed that the higher the concentration of the used gum and crude oil, the lower the compliance of the emulsions. For the Xanthan concentrations of less than 10³ ppm, the crude oil-gum emulsion exhibited viscous behavior. However, for the Xanthan concentration of higher than 10³, the examined emulsions displayed viscoelastic behavior.

Zwitterionic Graphene Quantum Dots to Stabilize Pickering Emulsions for Controlled-Release Applications

Graphene quantum dots (GQDs) are a subset of the nanocarbon material family, which promise a wide spectrum of applications. Herein, we describe amphiphilic graphene quantum dots with zwitterionic features (ZGQDs), which are able to stabilize the oil/water interface. ZGQDs were fabricated by modifying GQDs with tertiary amine groups and alkyl groups. Moreover, the blocking and unblocking behavior of ZGQDs at the oil/water interface could be tuned by adjusting pH values in the aqueous phase. It would provide a flexible and adjustable method to manipulate interfacial properties of ZGQDs, which enabled a switchable molecular diffusion through a fluid-fluid interface. ZGQDs have shown well-controlled interfacial behavior under different pH conditions, indicating great potential for applications in controlled molecular diffusion based on nanoparticles demonstrated in this work.

Compartmentalized Aqueous-in-Aqueous Droplets for Flow Biocatalysis

Compartmentalized bioreactions are vital for living cells to regulate biological events since they facilitate isolated yet orchestrated reactions and releases of biological molecules. Engineering bioreactions in compartmentalized droplet bioreactors not only promotes understanding of biological cells but also enhances control in synthetic biology systems. A typical droplet bioreactor is enclosed by impermeable water-in-oil interfaces, which inhibit the reaction rate with the accumulation of aqueous products. This work constructs aqueous two-phase system (ATPS) droplet bioreactors featuring selectively permeable interfaces, which are capable of sequestering reagents in aqueous droplets while constantly releasing products into the aqueous surroundings. Benefiting from this selective permeability, the proposed droplet bioreactor achieves a conversion rate up to 63.2% compared to the 17.9% from the impermeable aqueous-in-oil droplet reactor via coupled reaction-separation. More importantly, it is revealed that uniform aqueous-in-aqueous droplet clusters by microfluidics exhibit an up to 6-fold reaction rate enhancement compared to non-microfluidic ATPS reactors, indicating a unique flow interface effect in droplet clusters. This work offers a new route to allow enzymatic reactions to benefit from efficient flow chemistry via optimized aqueous-aqueous interfaces.

Probing the Interactions between Pickering Emulsion Droplets Stabilized with pH-Responsive Nanoparticles

The presence and adsorption of particles at the oil/water interface play a critical role in stabilizing Pickering emulsions and affecting their bulk behavior. For water-in-oil (W/O) and oil-in-water (O/W) Pickering emulsions with pH-responsive nanoparticles, their interaction forces and stabilization mechanisms at the nanoscale have not been reported. Herein, the Pickering emulsions formed by oil/water mixtures under different pH values with bilayer oleic acid-coated Fe₃O₄ nanoparticles (Fe₃O₄@2OA NPs) were characterized using microscopy imaging and zeta potential and interfacial tension (IFT) measurements. The interaction forces between formed emulsion droplets were quantified using an atomic force microscope (AFM) drop probe technique. A W/O emulsion formed at pH 2 and 4 is mainly stabilized by the steric barrier formation of confined particle layers (with Fe₃O₄@2OA NPs and aggregates). At pH 9 and 11, an O/W emulsion is formed, and its stabilization mechanism is mainly due to relatively low IFT, strong electrostatic repulsion due to carboxyl groups, and steric repulsion from confined nanoparticles and aggregates, leading to a stable confined thin water film. Increasing the maximum loading force and dwelling time enhances the confinement of Fe₃O₄@2OA particles and aggregates at the oil/water interface. This work provides useful insights into the interaction and stabilization mechanisms of Pickering emulsions with stimuli-responsive interface-active particles.