Enhanced Photocatalytic CO2 Reduction with Photothermal Effect by Cooperative Effect of Oxygen Vacancy and Au Cocatalyst

Interfacial engineering on hierarchical ZrO2 nanozyme realizes efficient CO2 photoreduction

Designing and fabricating nanozymes with photoactivity for CO2 reduction poses a significant challenge. Here, a hierarchically structured ZFs-tpyNi heterojunction nanozyme, comprising a terpyridine-based Ni complex supported on ZrO2 nanoframes, has been created through an interfacial engineering strategy for efficient CO2 reduction under visible light. Due to its unique structural and compositional advantages, ZFs-tpyNi demonstrates superior photocatalytic CO2-to-CO conversion compared to its counterpart of ZFs and tpyNi, achieving a CO yield of 18.2 µmol and a selectivity of 92.4 % with a high apparent quantum efficiency of 0.96 % in 3 h. These innovative catalysts also show excellent durability for at least eight cycles without a loss in performance, maintaining a remarkable structural stability with no obvious collapse of its framework and morphology. Systematic investigations reveal that ZFs-tpyNi heterostructures exhibit a high specific surface area advantageous for the effective loading of tpyNi and exposure of active sites. The robust ZFs framework, characterized by extensive porosity, prevents nanoparticle agglomeration and accelerates mass transfer during catalysis. Additionally, the spatially heterogeneous interface enables precise modulation of band alignment and bandgap dynamics in nanozymes, enhancing light absorption and promoting the generation and separation of photogenerated charge carriers. Consequently, the nanozyme demonstrates enhanced CO2 adsorption and activation capabilities, leading to improved selectivity of catalytic products. This work aims at highlight the role of nanozyme catalysts in sustainable energy production.

Revealing the Mechanism of Converting CO2 into Methanol by the Cu2O and Oxygen Vacancy on MgO: Experiments and Density Functional Theory

Given the great significance of defect and Cu compounds for the reduction of CO2 as well as the few reaction mechanisms of converting CO2 into different hydrocarbons, the effects of oxygen vacancies and Cu2O on the reduction of CO2 were thoroughly investigated, and possible mechanisms were also proposed. A series of Cu2O/Ov-MgO catalysts were synthesized for photothermal catalytic reduction of CO2 to methanol under visible-light irradiation, among which the 7%Cu2O/Ov-MgO composite exhibited the best reduction activity and the yield of methanol was 19.78 μmol·g-1·h-1. The successful composite of Cu2O and Ov-MgO can yield a loose and porous nanosheet, uniform distribution, favorable absorbance and photoelectric performance, and increased specific surface area and adsorption ability of CO2, which are all vital to the adsorption and conversion of CO2. The introduction of oxygen vacancy and Cu2O not only promotes the adsorption of CO2 but also provides more electron-triggered CO2 activation. Density functional theory (DFT) calculation was also performed to reveal the reaction mechanism for effective enhanced CO2 reduction to ethanol or methanol by the comparison of CuO/MgO and Cu2O/Ov-MgO composites, illustrating the reaction pathways of different products. By comparing the key steps in determining the selectivity of C1 or C2, the kinetic barriers of obtaining CH3OH for the Cu2O/Ov-MgO composite with CH3OH as the main product were found to be lower than those of generating CH2*, while the opposite is true for CuO/MgO composites, whereby it may be easier to obtain more C2 products. These insights into the reaction mechanism of converting CO2 into different hydrocarbons are expected to provide guidance for the further design of high-performance photothermal catalytic CO2 reduction catalysts.

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 μmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

Solar-Driven Continuous CO2 Reduction to CO and CH4 using Heterogeneous Photothermal Catalysts: Recent Progress and Remaining Challenges

The urgent need to reduce the carbon dioxide level in the atmosphere and keep the effects of climate change manageable has brought the concept of carbon capture and utilization to the forefront of scientific research. Amongst the promising pathways for this conversion, sunlight-powered photothermal processes, synergistically using both thermal and non-thermal effects of light, have gained significant attention. Research in this field focuses both on the development of catalysts and continuous-flow photoreactors, which offer significant advantages over batch reactors, particularly for scale-up. Here, we focus on sunlight-driven photothermal conversion of CO2 to chemical feedstock CO and CH4 as synthetic fuel. This review provides an overview of the recent progress in the development of photothermal catalysts and continuous-flow photoreactors and outlines the remaining challenges in these areas. Furthermore, it provides insight in additional components required to complete photothermal reaction systems for continuous production (e. g., solar concentrators, sensors and artificial light sources). In addition, our review emphasizes the necessity of integrated collaboration between different research areas, like chemistry, material science, chemical engineering, and optics, to establish optimized systems and reach the full potential of this technology.

Accelerating Charge Separation and CO2 Photoreduction in Aqueous Phase under Visible Light with Ru Nanoparticles Loaded on Ga-Doped NiTiO3 in a Batch Photoreactor

Titanate perovskite (ATiO3) semiconductors show prospects of being active photocatalysts in the conversion of CO2 to chemical fuels such as methanol (CH3OH) in the aqueous phase. Some of the challenges in using ATiO3 are limited light-harvesting capability, rapid bulk charge recombination, and the low density of catalytic sites participating in CO2 reduction. To address these challenges, Ga-doped NiTiO3 (GNTO) photocatalysts in which Ga ions substitute for Ti ions in the crystal lattice to form electron trap states and oxygen vacancies have been synthesized in this work. The synthesized GNTO was then loaded with Ru nanoparticles to accelerate charge separation and enable excellent CO2 photoreduction activity under visible light. CO2 photoreduction was conducted in a batch photoreactor charged with a 0.1 M NaHCO3 aqueous solution at room temperature and a 3.5 bar pressure using a 1.0 wt % Ru-GNTO photocatalyst to yield methanol at a rate of 84.45 μmol g-1 h-1. A small amount of methane was produced as a side product at 21.35 μmol g-1 h-1, which is also a fuel molecule. We attribute this high catalytic activity toward CO2 photoreduction to a synergistic combination of our novel heterostructured 1.0 wt % Ru-GNTO photocatalyst and the implementation of a pressurized photoreactor. This work demonstrates an effective strategy for metal doping with active nanospecies functionality to improve the performance of ATiO3 photocatalysts in valorizing CO2 to solar fuels.

Efficient Solar-Driven CO2 Methanation and Hydrogen Storage Over Nickel Catalyst Derived from Metal-Organic Frameworks with Rich Oxygen Vacancies

Solar-driven photothermal conversion of carbon dioxide (CO2 ) to methane (CH4 ) is a promising approach to remedy energy shortage and climate changes, where highly efficient photothermal catalysts for CO2 methanation urgently need to be designed. Herein, nickel-based catalysts (Ni/ZrO2 ) derived from metal-organic frameworks (MOFs) are fabricated and studied for photothermal CO2 methanation. The optimized catalyst 50Ni/ZrO2 achieves a stable CH4 production rate of 583.3 mmol g-1  h-1 in a continuous stability test, which is almost tenfold higher than that of 50Ni/C-ZrO2 synthesized via commercial ZrO2 . Physicochemical properties indicate that 50Ni/ZrO2 generates more tetragonal ZrO2 and possesses more oxygen vacancies (OVs) as well as enhanced nickel-ZrO2 interaction. As a result, 50Ni/ZrO2 exhibits the strong abilities of light absorption and light-to-heat conversion, superior adsorption capacities of reactants (H2 , CO2 ), and an intermediate product (CO), which finally boosts CH4 formation. This work provides an efficient strategy to design a photothermocatalyst of CO2 methanation through utilizing MOFs-derived support.

Au nanoparticle sensitized blue TiO2 nanorod arrays for efficient Gatifloxacin photodegradation

TiO2 nanorod arrays have been widely used in photocatalytic processes, but their poor visible light absorption and rapid carrier recombination limit their application. Both introducing oxygen vacancies and using precious metals as surface plasmon resonance (SPR) stimulators are effective strategies to enhance their photocatalytic performance. Herein, Au nanoparticle sensitized blue TiO2 nanorod arrays (Au/B-TiO2) were successfully fabricated for efficient Gatifloxacin photodegradation. The degradation efficiency of Gatifloxacin was up to 95.0%. Moreover, the corresponding reaction rate constant (Ka) was up to 0.02007 min-1. Additionally, it was suggested that Gatifloxacin could be subject to three different degradation pathways. The superior catalytic activity of Au/B-TiO2 is a result of the combined effect of the two components. Firstly, TiO2 nanorod arrays provide a larger surface area for Au deposition and act as efficient transfer channels. Secondly, the presence of oxygen vacancies in blue TiO2 nanorod arrays enhances the catalytic activity. Thirdly, Au acts as a SPR activator, providing a large number of high-energy electrons in the photocatalysis process. Lastly, the improved light capture capabilities are essential for efficient removal of Gatifloxacin. This work provides a new approach for the construction of a high-performance heterojunction photocatalyst in advanced oxidation processes.

Promoting Photocatalytic Carbon Dioxide Reduction by Tuning the Properties of Cocatalysts

Suppressing the amount of carbon dioxide in the atmosphere is an essential measure toward addressing global warming. Specifically, the photocatalytic CO2 reduction reaction (CRR) is an effective strategy because it affords the conversion of CO2 into useful carbon feedstocks by using sunlight and water. However, the practical application of photocatalyst-promoting CRR (CRR photocatalysts) requires significant improvement of their conversion efficiency. Accordingly, extensive research is being conducted toward improving semiconductor photocatalysts, as well as cocatalysts that are loaded as active sites on the photocatalysts. In this review, we summarize recent research and development trends in the improvement of cocatalysts, which have a significant impact on the catalytic activity and selectivity of photocatalytic CRR. We expect that the advanced knowledge provided on the improvement of cocatalysts for CRR in this review will serve as a general guideline to accelerate the development of highly efficient CRR photocatalysts.

Co-embedding oxygen vacancy and copper particles into titanium-based oxides (TiO2, BaTiO3, and SrTiO3) nanoassembly for enhanced CO2 photoreduction through surface/interface synergy

Photocatalytic CO₂ reduction into valuable fuel and chemical production has been regarded as a prospective strategy for tackling with the issues of the increasing of greenhouse gases and shortage of sustainable energy. A composite photocatalysis system employing a semiconductor enriched with oxygen vacancy and coupled with metallic cocatalyst can facilitate charge separation and transfer electrons. In this work, mesoporous TiO₂ and titanium-based perovskite oxides (BaTiO₃ and SrTiO₃) nanoparticle assembly incorporated with abundant oxygen vacancy and copper particles have been successfully synthesized for CO₂ photoreduction. As an example, the TiO₂ decorated with different amounts of Cu particles has an impact on photocatalytic CO₂ reduction into CH₄ and CO. Particularly, the optimal TiO₂/Cu-0.1 exhibits nearly 13.5 times higher CH₄ yield (22.27 μmol g^-1 h^-1) than that of pristine TiO₂ (1.65 μmol g^-1 h^-1). The as-obtained BaTiO₃/Cu-0.1 and SrTiO₃/Cu-0.1 also show enhanced CH₄ yields towards photocatalytic CO₂ reduction compared with pristine ones. Based on the temperature programmed desorption (TPD) and photo/electrochemical measurements, the co-embedding of Cu particles and abundant oxygen vacancy into the titanium-based oxides could promote CO₂ adsorption capacity as well as separation and transfer of photoinduced electron-hole pairs, and finally result in efficient CO₂ photoreduction upon the TiO₂/Cu, SrTiO₃/Cu, and BaTiO₃/Cu composites.

Boosting the Electrocatalytic CO2 Reduction Reaction by Nanostructured Metal Materials via Defects Engineering

Electrocatalytic CO₂ reduction reaction (CO₂RR) is one of the most effective methods to convert CO₂ into useful fuels. Introducing defects into metal nanostructures can effectively improve the catalytic activity and selectivity towards CO₂RR. This review provides the recent progress on the use of metal nanomaterials with defects towards electrochemical CO₂RR and defects engineering methods. Accompanying these ideas, we introduce the structure of defects characterized by electron microscopy techniques as the characterization and analysis of defects are relatively difficult. Subsequently, we present the intrinsic mechanism of how the defects affect CO₂RR performance. Finally, to promote a wide and deep study in this field, the perspectives and challenges concerning defects engineering in metal nanomaterials towards CO₂RR are put forward.

Ultrafast chiral peptides purification via surface plasmon enhanced spin selectivity

By D-arginine and L-arginine chiral peptides induced spin selectivity and Au NPs enhanced spin polarization, chiral peptides purification has been effectively simplified and the purification performance has raised from a mixture system. The angular momentums of light are operated by the polarizer and wave plates. Au NPs decorated ZnO nanorods electrodes are utilized to modulate the polarization of spintronic. Seed growth methods are for synthesizing spherical Au NPs. UV light reduction methods are for urchin-liked Au NPs. Au NPs are decorated on ZnO nanorods electrodes for rising photon to electron conversion efficiency and enhancing spin polarization rates by surface plasmon effect. From our results, photon to the electron conversion efficiency of ZnO nanorods electrodes has effectively enhanced by urchin-liked Au NPs decorating. Ultrahigh localized plasmon conversion efficiency as high as 60% was also obtained. Besides, density functional theory (DFT) calculations simulated the force on spintronic. Since the D-arginine and L-arginine are on Au substrate, DFT results demonstrate different angular momentum and spin polarization coupling. Along with urchin-liked Au NPs rising chiral induced spin polarization by surface plasmon resonance, the sensitivity of chiral arginine has been raised around 5000% from bare ZnO nanorods electrodes. The purification and separation time of a specific chiral arginine only needs 5 min.

Synergy between plasmonic and sites on gold nanoparticle-modified bismuth-rich bismuth oxybromide nanotubes for the efficient photocatalytic CC coupling synthesis of ethane

The photocatalytic reduction of carbon dioxide (CO₂) to fossil fuels has attracted widespread attention. However, obtaining the high value-added hydrocarbons, especially C₂₊ products, remains a considerable challenge. Herein, gold (Au) nanoparticle-modified bismuth-rich bismuth oxybromide Bi₁₂O₁₇Br₂ nanotube composites were designed and tested. Au nanoparticles act as electron traps and thermal electron donors that promote the efficient separation and migration of carriers to form the C₂₊ product. As a result, compared with the pure Bi₁₂O₁₇Br₂ nanotubes, Au@Bi₁₂O₁₇Br₂ composites can not only produce the carbon monoxide (CO) and methane (CH₄), but also covert CO₂ into ethane (C₂H₆). In this study, Au@Bi₁₂O₁₇Br₂-700 was used to obtain a C₂H₆ production rate of 29.26 μmol h^-1 g^-1. The selectivities during a 5-hour test reached 94.86% for hydrocarbons and 90.81% for C₂H₆. The proposed approach could be used to design high-performance photocatalysts to convert CO₂ into high value-added hydrocarbon products.

Pd Nanosheet-Decorated 2D/2D g-C3N4/WO3·H2O S-Scheme Photocatalyst for High Selective Photoreduction of CO2 to CO

The development of the global economy in recent years, environmental problems, greenhouse effect, and so forth have been of concern for countries all over the world. The key for solving the greenhouse effect is the reduction of CO₂. With the development of photocatalytic reduction of CO₂, hybrid photocatalytic nanostructures composed of noble metals and plasmonic semiconductors are being widely studied. In this work, S-scheme photocatalysts with a g-C₃N₄/WO₃·H₂O/Pd heterostructure was constructed by introducing ultrathin Pd nanosheets into the optimized 2D/2D g-C₃N₄/WO₃·H₂O binary system. The S-scheme charge transfer generated by the matched band gap of g-C₃N₄ and WO₃·H₂O can effectually improve the electron transfer rate and the redox ability of photogenerated carriers. The introduction of Pd nanosheets can inject a large number of hot electrons into the semiconductor on the basis of the S-scheme heterojunction to participate in the reaction. The S-scheme electron transfer method is used to improve the utilization rate of thermionic electrons and achieve the effect of widening the near-infrared-light absorption area of the composite material. Moreover, the reaction was carried out in water without the addition of any sacrificial agent, which can better reflect the green environmental protection of the experiment. This investigation will promote the broad-spectrum application of new and environment-friendly thermoelectron-assisted S-scheme photocatalysts, and on this basis, the possible reaction mechanism is discussed.

Recent Advances in Porous Materials for Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction into solar fuels is a promising technology for addressing energy and CO₂ emission issues. Because of the superior properties in CO₂ adsorption and activation, molecular diffusion, light absorption, and charge separation and transfer, porous materials have been developed into a multifunctional platform for photocatalytic CO₂ reduction. In this Perspective, we first discuss the emerging trends of CO₂ reduction in major inorganic porous materials-based photocatalysts, such as mesoporous materials, macroporous materials, hollow materials, hierarchically porous materials, and zeolites. Prospects and challenges in the development of porous materials-based photocatalysts are then outlined. Finally, we envision feasible solutions for the deployment of porous materials to enhance photocatalytic CO₂ reduction performance.