Facet Engineering of Bismuth Molybdate via Confined Growth in a Nanoscale Template toward Water Remediation

Investigating Solvent-Induced Aggregation in Edge-Functionalized Layered Silicates via All-Atom Molecular Dynamics Simulations

Molecular dynamics simulations can provide the means to visualize and understand the role of intermolecular interactions in the mechanisms involved in molecular aggregation. Along these lines, simulations can allow the study of how surface chemical modifications can influence nanomaterial assembly at the molecular level. Layered silicate clays have been of significant interest for some time, particularly with regard to their use in organic/inorganic nanocomposites. However, despite numerous reports on the covalent linkage of organic moieties via silanol condensation, the theoretical understanding of these systems has heretofore been limited to noncovalent interactions, specifically ionic interactions at the charged basal surfaces. Herein, a model for edge-functionalized layered aluminosilicate clay, based on the siloxane linkage, is presented. In addition to reproducing experimentally observed degrees of molecular aggregation of clay-linked perylene diimide derivatives with different terminal functional groups as a function of solvent composition, a molecular-level understanding of the role of van der Waals interactions and hydrogen bonding of the different end-groups on the aggregation state in different water/N,N-dimethylformamide mixtures is obtained. The reported model provides a means to simulate organic moieties covalently bound to the layered silicate edge, which will enable future simulations of nanocomposites and organic/inorganic hybrids based on this system.

Layered Double Hydroxide-Bismuth Molybdate Hybrids toward Water Remediation via Selective Adsorption of Anionic Species

The steady release of anthropogenic toxins into the biosphere is compromising water security globally. Herein, CoAl layered double hydroxide, a clay-like layered material with a cationic surface charge, was organically modified and used to template the growth of Bi₂MoO₆. The resulting nanohybrid selectively removed the anionic dye methyl orange from aqueous solution and showed an enhancement of greater than 300% in the maximum adsorptivity (1.95 mmol/g) compared to modified CoAl layered double hydroxide (0.42 mmol/g). Interestingly, the observed improvement in adsorption occurs without any significant increase in the surface area of the hybrids. Furthermore, these hybrids exhibit increased broadband visible light absorption, and their photoactivity is slightly improved compared to CoAl layered double hydroxide. This study demonstrates that composites of clay-like materials with Aurivillius oxides are promising sorbent materials for water decontamination and photocatalytic antifouling membranes and shows that the synthetic strategy that was first established with an anionic layered silicate nanoclay can be generalized to other ionic layered materials.

Performance comparison of distinct bismuth molybdate single phases for asymmetric supercapacitor applications

The enticing features of metal molybdates make them an attractive candidate for energy storage systems. This report describes the synthesis of three distinct single-phase bismuth molybdates (Bi₂Mo_xO_y; α-Bi₂Mo₃O₁₂, β-Bi₂Mo₂O₉, and γ-Bi₂MoO₆) using the gel matrix particle growth method and their application in high-performance asymmetric supercapacitors. The single phase and purity of the synthesized Bi₂Mo_xO_y particles were confirmed by X-ray diffraction (XRD) and further verified by Raman analysis. The UV-visible spectra show the electronic and optical behaviours of the as-synthesized α, β, and γ Bi₂Mo_xO_y. The morphologies of the as-synthesized three different Bi₂Mo_xO_y phases were analysed using scanning electron microscopy (SEM). The particle formation was further investigated by transmission electron microscopy (TEM), and the interplanar spacings of the Bi₂Mo_xO_y phases were in accordance with the planes. The surface area and pore volume of the prepared samples were analysed using Brunauer-Emmett-Teller (BET) analysis. The electrochemical properties of the products were confirmed by various tests, including cyclic voltammetry (CV), galvanostatic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) in 3 M KOH. Among the three phases, α-Bi₂Mo₃O₁₂ exhibits a huge specific capacitance (Cs) of 714 F g^-1 at a current density of 1 A g^-1. Furthermore, it displays an admirable cycling stability of 86.55% after 5000 cycles. The chosen α-Bi₂Mo₃O₁₂ electrode possesses an increased energy density of 47.5 W h kg^-1 at 1 A g^-1 with a capacitive retention rate of 71.90% at 5 A g^-1 after 10 000 cycles. A remarkable electrochemical performance of Bi₂Mo₃O₁₂ with an exceptional power density of 750 W kg^-1 was observed for the prepared asymmetric device. Bismuth molybdate's notable performance indicates that it can be an active material for energy storage applications.

Surface-Encapsulated Bismuth Molybdate-Layered Silicate Hybrids as Sorbents for Photocatalytic Filtration Membranes

Groundwater is being depleted globally at an average rate of more than one meter per year, during a period when more than a quarter of the human population has no access to potable water. Aside from overexploitation, freshwater security is also threatened by climate change and chemical pollution. The contamination of surface and groundwater by industrial substances is also undermining the vitality of ecosystems. It was previously shown that {100}-faceted Bi2MoO6-Laponite hybrids effectively bind and photodegrade molecular species, aiding in the decontamination of water. In this study, the encapsulation of Bi2MoO6-Laponite particles with the polymers butyl acrylate and styrene further enhanced adsorption of methylene blue by 31.4%, with a specific adsorption capacity of 192 μmol/g. The polymer-particle composites were deposited to form membranes and their efficacies in water filtration and photodegradation were examined. Among the different surface modifications examined, the highest dye sorption was obtained by butyl acrylate and styrene (3:2) with a 5 mol % cross-linker. This study provides a method for enhancing the molecular adsorption of composite particles used in membranes capable of multiple cycles of adsorption and photodegradation, advancing the application of such systems to water filtration.

Photo-Driven Reduction of Carbon Dioxide: A Sustainable Approach Towards Achieving Carbon Neutrality Goal

The photo-driven reduction of carbon dioxide (CO2) into green and valuable solar fuels could be a promising solution to simultaneously address energy- and environmental-related problems. This approach could play an integral role in achieving a sustainable energy economy by closing the carbon cycle and allowing the storage and transportation of intermittent solar energy within the chemical bonds of hydrocarbon molecules. This Perspective discusses the latest technological advancements in photo-driven CO2 conversion via various pathways, namely photocatalysis, photoelectrocatalysis and photovoltaic-integrated systems. In addition to providing an outlook on unresolved issues concerning the said technologies, this Perspective also spotlights new trends and strategies in the structural engineering of materials to meet the demands for prominent CO2 photoreduction activity as well as spearhead the ground-breaking advances in the field that lead to the translation of CO2 photo-driven technologies from the laboratory to industrial-scale applications.

Oxygen vacancy induced electron traps in tungsten doped Bi2MoO6 for enhanced photocatalytic performance

As the concentration of the W dopant increased in the Bi2Mo1−xWxO6 nanosheets, the density of the oxygen vacancies became higher, which served as electron trap centers to lower the recombination rate and enhance the photocatalytic performance.