MoS2/FeS Nanocomposite Catalyst for Efficient Fenton Reaction

Based on Fe and Ni prepared organic colloidal materials as efficient oxide nanozymes for chemiluminescence detection of GSH and Hg(II) ions

Metal-organic gels (MOGs) are a type of metal-organic colloid material with a large specific surface area, loose porous structure, and open metal active sites. In this work, FeNi-MOGs were synthesized by the simple one-step static method, using Fe(III) and Ni(II) as the central metal ions and terephthalic acid as the organic ligand. The prepared FeNi-MOGs could effectively catalyze the chemiluminescence of luminol without the involvement of H2O2, which exhibited good catalytic activity. Then, the multifunctional detected platform was constructed for the detection of GSH and Hg2+, based on the antioxidant capacity of GSH, and the strong affinity between mercury ion (Hg2+) and GSH which inactivated the antioxidant capacity of GSH. The experimental limits of detection (LOD) for GSH and Hg2+ were 76 nM and 210 nM, and the detection ranges were 2-100 μM and 8-4000 μM, respectively. The as-proposed sensor had good performance in both detection limit and detection range of GSH and Hg2+, which fully met the needs of daily life. Surprisingly, the sensor had low detection limits and an extremely wide detection range for Hg2+, spanning five orders of magnitude. Furthermore, the detection of mercury ions in actual lake water and GSH in human serum showed good results, with recovery rates ranging from 90.10 % to 105.37 %, which proved that the method was accurate and reliable. The as-proposed sensor had great potential as the platform for GSH and Hg2+ detection applications.

Construction of an S-scheme electron transfer channel in Cu0/CuFe2O4 magnetic plate column reactor for the LEV degradation: New strategy of visible Photo-Fenton system application

The complicated loading process and easy falling off of powder catalysts still restrict the wide application of Photo-Fenton technology in practical water treatment. In this study, a magnetic fixed film plate column water treatment equipment is designed as a visible Photo-Fenton reactor to remove levofloxacin (LEV). The effect of magnetic force can ensure that the catalyst is firmly fixed, and the multi-level shallow column plate structure achieves full contact and efficient reaction between the catalyst and wastewater. Simultaneously, the Cu0/CuFe2O4 (STCCF) utilizes Cu0 to construct an S-scheme electron transfer channel, which improves the separation efficiency of photo-generated carriers and provides sufficient photo-generated electrons for the reduction of Fe (Ⅲ) and Cu (Ⅱ). The pseudo-first-order reaction kinetic constant k for the degradation of LEV in the visible Photo-Fenton system is 0.0349 min-1, which is 15.9 times that of the photocatalytic system and 4.8 times that of the Fenton system. After continuous operation for 72 h, the magnetic fixed film plate column reactor can still remove more than 90 % of LEV and 82 % of COD in the secondary effluent of simulated antibiotic pharmaceutical wastewater treatment process, and the effluent is stable and meets the standard. The magnetic fixed film plate column reactor can be used for advanced treatment of antibiotic pharmaceutical wastewater. This study provides a new insight into the application of the Photo-Fenton process.

Floating MIL-88A(Fe)@expanded perlites catalyst for continuous photo-Fenton degradation toward tetracyclines under artificial light and real solar light

In this work, MIL-88A(Fe) was immobilized onto the expanded perlites to fabricate the floating MIL-88A(Fe)@expanded perlites (M@EP) catalyst via high throughput batch synthesis method under room temperature. The as-prepared M@EP could efficiently activate H2O2 to achieve 100% tetracycline antibiotics (TCs) removal under both artificial low power UV light (UVL) and real sunlight (SL) irradiation. The toxicological evaluation, growth experiment of mung beans and antimicrobial estimation revealed the decreasing aquatic toxicity of the TCs intermediates compared to those of the pristine TCs. A self-designed continuous bed reactor was employed to investigate the long-term operation of the M@EP. The findings demonstrated that the antibiotics mixture can be continuously degraded up to 7 days under UVL and 5 daytimes under SL irradiation, respectively. More importantly, ca. 76.9% and 81.6% of total organic carbon (TOC) removal efficiencies were accomplished in continuous bed reactor under UVL and SL irradiation, respectively. This work advances the immobilized MOFs on floating supports for their practical application in large-scale wastewater purification through advanced oxidation processes. ENVIRONMENTAL IMPLICATION: This work presented the high throughput production and photo-Fenton degradation application of floating MIL-88A(Fe)@expanded perlites (M@EP). Three tetracycline antibiotics (TCs) were selected as model pollutants to test the degradation ability of M@EP in batch experiment and continuous operation under artificial light and solar light. The complete TCs degradation could be accomplished in self-designed device up to 7 d under UV light and 5 d under real solar light. This work tapped a new door to push MOFs-based functional materials in the real water purification.

Mediating peroxymonosulfate activation path in Fenton-like reaction via doping different metal atoms into g-C3N5

Peroxymonosulfate (PMS) could be activated by either radical path or non-radical path, how to rationally mediate these two routines was an important unresolved issue. This work has introduced a simple way to address this problem via metal atom doping. It was found that Fe-doped nitrogen-rich graphitic carbon nitride (Fe-C3N5) exhibited high activity towards PMS activation for tetracycline degradation, and the degradation rate was 3.14 times higher than that of Co-doped nitrogen-rich graphitic carbon nitride (Co-C3N5). Radical trapping experiment revealed the contributions of reactive species over two catalysts were different. Electron paramagnetic resonance analysis further uncovered the non-radical activation path played a dominated role on Fe-C3N5 surface, while the radical activation path was the main routine on Co-C3N5 surface. Density functional theory calculations, X-ray photoelectron spectroscopy analysis, and electrochemical experiments provided convincing evidence to support these views. This study supplied a novel method to mediate PMS activation path via changing the doped metal atom in g-C3N5 skeleton, and it allowed us to better optimize the PMS activation efficiency.

Superior performance of oxygen vacancy-enriched Cu-Co3O4/urushiol-rGO/peroxymonosulfate for hypophosphite and phosphite removal by enhancing singlet oxygen

The treatment of wastewater containing hypophosphite [P(I)] and phosphite [P(III)] is challenged by limitations of traditional Fenton oxidation such as low efficiency, secondary pollution and high costs. This study introduced a facile solvent-thermal method to synthesize Cu-Co3O4 nanoparticles uniformly loaded on graphene (Cu-Co3O4/U-rGO) through the reduction and coordination effects of urushiol (U). As prepared Cu-Co3O4/U-rGO exhibited excellent activity in activating peroxymonosulfate (PMS) for the oxidation of P(I)/P(III) to phosphate [P(V)] (0.229 min-1), along with high stability and reusability (91.5 % after 6 cycles), low metal leaching rate (Co: 0.2 mg/L, Cu: 0.05 mg/L), insensitivity to common anions in water and a wide pH range (3-11). The activation mechanism involved the synergistic effects from both urushiol and graphene, which promoted redox of Cu+/Cu2+ and Co2+/Co3+ and induced abundant oxygen vacancies for PMS activation to produce singlet oxygen. Furthermore, the Cu-Co3O4/U-rGO/PMS was also excellent in the oxidative removal of organic phosphorus. This study is expected to advance strategies for the treatment of P(I)/P(III)-rich wastewater and provide new insights for the development of low-cost, highly efficient heterogeneous catalysts with abundant oxygen vacancies.

Mechanochemical synthesis of microscale zero-valent iron/N-doped graphene-like biochar composite for degradation of tetracycline via molecular O2 activation

In this study, we prepared a micron zero-valent iron/N-doped graphene-like biochar (mZVI/NGB) composite using a mechanochemical method for tetracycline (TC) degradation through O2 activation. The mZVI and NGB components formed a strong coupling catalytic system, with mZVI acting as an electron pool and NGB as a catalyst for H2O2 generation. Under circumneutral pH (5.0-6.8), the mZVI/NGB composite exhibited exceptional TC removal efficiency, reaching nearly 100 % under optimal conditions. It also showed good tolerance to co-existing anions, such as Cl-, SO42-, and humic acid. Further studies found that the TC degradation mechanism was mainly ascribed to the non-radical pathway (1O2 and electron transfer), and the Fe2+/Fe3+ redox cycle on the composite's surface also played a crucial role in maintaining catalytic activity. This research contributes to the development of advanced materials for sustainable and effective water treatment, addressing pharmaceutical pollutant contamination in water sources.

Satisfactory degradation of tetracycline by a pH-universal CoFe-LDH/MoS2 heterojunction catalyst in Fenton process

Fenton or Fenton-like reactions have been widely used in various fields, including solar energy conversion to generate hydroxyl radicals, environmental remediation, biology, and life science. However, the slow Fe3+/Fe2+ cycle and narrow applicable pH range still present significant challenges. Here, a heterostructured CoFe-layered double hydroxide/MoS2 nanocomposite (CoFe-LDH/MoS2) was prepared via simple electrostatic interactions. The heterostructure establishes a robust interfacial contact, leading to an abundance of exposed Mo6+ sites. Consequently, the developed CoFe-LDH/MoS2+H2O2 system exhibited superior performance in the degradation of tetracycline (>85%) within 60 min across a wide pH range from acidic to basic. Moreover, the CoFe-LDH/MoS2 heterojunction catalysts exhibited exceptional resistance to common anions and efficiently degraded various organic pollutants. The mechanism study verified that the CoFe-LDH/MoS2 had high efficiency in producing 1O2 and ‧OH to degrade various organic pollutants. The present study will serve as a foundation for creating efficient catalyst systems for related environmental remediation.

Honeycomb-like biochar framework coupled with Fe3O4/FeS nanoparticles as efficient heterogeneous Fenton catalyst for phenol degradation

Achieving an efficient and stable heterogeneous Fenton reaction over a wide pH range is of great significance for wastewater treatment. Here, a pollen-derived biochar catalyst with a unique honeycomb-like structure, coupled with the dispersion of magnetic Fe3O4/FeS (Fe/S) nanoparticles, was synthesized by simple impregnation precursor, followed by pyrolysis. The prepared Fe/S-biochar catalyst demonstrated outstanding phenol degradation efficiency across a wide pH range, with 98% of which eliminated even under neutral conditions (pH 7.0). The high catalytic activity was due to the multilevel porous structure of pollen-derived biochar provided enough active sites and allowed for better electron transfer, then increases oxidation ability to promote the reaction. Moreover, the acid microenvironment formed by SO42- group from Fe/S composite extended the pH range for Fenton reaction, and S2- facilitated the conversion of Fe3+ to Fe2+, resulting in remarkable degradation efficiency. Further, biochar can effectively promote cycling stability by limiting Fe leaching. This work may provide a general strategy for designing 3D framework biochar-based Fe/S catalysts with excellent performance for heterogeneous Fenton reactions.

Electron-deficient Fe3O4@AC-NH2@Cu-MOF nanoparticles for enhanced degradation of electron-rich benzene derivatives via synergistic adsorption and catalytic oxidation

Benzene derivatives in wastewater have negative impacts on ecosystems and human health, making their removal prior to discharge imperative. In this study, Fe3O4@AC-NH2@Cu-opa (AC-NH2 = aminoclay, Cu-opa = [Cu(opa)(bipy)0.5(H2O)]n (H2opa = 3-(4-oxypyridinium-1-yl) phthalic acid)) nanoparticles (NPs) were synthesized as adsorbent and catalyst for phenolic compound removal from wastewater. Fe3O4@AC-NH2@Cu-opa NPs demonstrated outstanding performance in the adsorption of phenol, exhibiting a remarkable adsorption capacity of up to 166.39 mg g-1 according to the Langmuir model. The composite also exhibited higher Fenton activity toward the degradation of electron-rich organic phenolic pollutants, with a rate approximately 3.4 times higher than that of Fe3O4 alone. The high catalytic activity of the composite was attributed to the large surface area and abundant active sites of the 2D charge-separated Cu-MOF. Meanwhile, the superparamagnetism of the Fe3O4 core enabled magnetic recollection and reuse without any significant loss of activity. Therefore, use of Fe3O4@AC-NH2@Cu-opa/H2O2 shows potential in an efficient method for the removal of phenolic compounds from wastewater.

Sulfadiazine removal efficiency with persulfate driven by electron-rich Cu-beta zeolites

Surface electron transport and transfer of catalysts have important consequences for persulfate (PS) activation in PS system. In this paper, an electron-rich Cu-beta zeolites catalyst was synthesized utilizing a straightforward solid-state ion exchange technique to efficiently degrade sulfadiazine. The X-ray diffraction (XRD) and fourier transform infrared spectroscopy (FTIR) results revealed that Cu element substitutes Al element and enters the beta molecular sieve framework smoothly. Furthermore, the X-ray photoelectron spectroscopy (XPS) measurements demonstrated that the Cu-beta catalyst is primarily Cu0. Cu-beta zeolites catalyst can exhibit excellent catalytic activity to degrade sulfadiazine with the oxidant of PS. The optimal sulfadiazine removal performance was explored by adjusting reaction parameters, including sulfadiazine concentration, catalyst dosage, oxidant dosage, and solution pH. The sulfadiazine removal efficiency in the Cu-beta zeolites/PS system could reach 90.5% at the optimal reaction condition ([PS]0 = 0.5 g/L, [Cu-beta zeolites]0 = 1.0 g/L, pH = 7.0) with 50 mg/L of sulfadiazine. Meanwhile, The degradation efficiency was less affected by anionic interference (Cl-, SO4-, HCO3-). The surface electron transport and transfer of the Cu-beta zeolites catalyst were significant causes for the remarkable degradation performance. According to electron paramagnetic resonance (EPR) and quenching studies, the Cu-beta zeolites/PS system was mostly dominated by SO4•- in the degradation of sulfadiazine. Furthermore, two possible pathways for sulfadiazine degradation were proposed according to the analysis of intermediate products detected by the liquid chromatography-mass spectrometry (LC-MS).

Multiorbital DNA walker nanoprobe for portable photothermal detection based on H2S etching of cubic Prussian blue

In the developed assay, multiorbital 3D DNA walker (MO DNA walker) was applied as signal amplified protocol for enhancing the detection signal of the photothermal biosensor, which was designed for sensitive detection of miRNA based on the H2S triggered conversation of photothermal reagent. When the target molecule is present, the DNA walking strand was released and then hybridize with track strands. The landing of walking particles (WPT) on the tracking particles (TPT) promotes the relative movement of the WPT around TPT, thus releasing large amount of horseradish peroxidase (HRP) with the aid of DNAzyme. After reacting with Na2S2O3 and H2O2, multiple H2S can be generated in situ based on the catalytic ability of HRP. Meanwhile, cubic Prussian blue (CPB) was synthesized and exhibited superior photothermal response, which can be served as efficient photothermal reagent and H2S responsive acceptor. Significantly, the photothermal signal of CPB could be obviously reduced after challenged with H2S ascribed to synchronous reaction between the ferric ion (Fe3+) and H2S. The improved walking area and freedom enable significant signal amplification, enhancing the biosensor's performance. Under ideal circumstances, the proposed photothermal assay demonstrated excellent performance for determination of miRNA-21.

Boosting Fenton's Oxidation Reaction by a Food Waste-Derived Catalyst for Oxidizing Organic Dyes: Synergistic Effect of Complex Iron Oxides and the Layer Carbon Structure

The constant increase in the human population drives the demand for food supply and thereby increasing the food wastage dramatically all over the world. Especially, around 60% of banana biomass has been generated as inedible domestic waste. Herein, we successfully employed banana waste as a catalyst for Fenton's oxidation reaction. The biomass-derived catalysts were subjected to various characterization techniques such as XRD, ATR-FTIR, confocal Raman spectroscopy, and XPS, XRF, BET, SEM, and TEM analyses. The XRD results revealed that, after carbonization of the dried banana bract material, a perloffite-like metal oxide phase was formed due to the aerial oxidation reaction. Characterization results of Raman and ATR-FTIR confirm that the carbonized catalyst possesses a layer-like structure with different types of functional groups. The calcium, magnesium, potassium, sodium, and iron are the dominating metal species in the resultant material, which was evident from the XRF and EDAX analyses. The carbonized banana bract catalyst is successfully utilized for the Fenton's oxidation reaction at neutral pH. The experimental results showed that the degradation efficiency of the fresh catalyst was 95% in 4 h of reaction time, and the stability of the catalyst was retained up to nine consecutive cycles. The high activity of MB, methylene blue, is mainly attributed to the strong interaction between oxy functional groups of the catalyst and MB molecule as compared to RhB. Further, the calculated efficiency of the hydrogen peroxide was found to be 99% and the self-decomposition of hydrogen peroxide by the formed metal oxides was highly limited.

New insight into the activation mechanism of hydrogen peroxide by greigite (Fe3S4) for benzene removal: The combined action of dissolved and surface bounded ferrous iron

Iron sulfides have attracted growing concern in heterogeneous Fenton reaction. However, the structure of iron sulfides is different from that of iron oxides and how the structures affect the activation property of hydrogen peroxide (H₂O₂) remains unclear. This study investigated benzene removal through the activation of H₂O₂ by the synthesized magnetite (Fe₃O₄) and greigite (Fe₃S₄). The structures of Fe₃O₄ and Fe₃S₄ were characterized by XRD and EPR, the electron transfer properties of Fe₃O₄ and Fe₃S₄ were analyzed by electrochemical workstation, XPS and DFT. It is revealed that the effective benzene removal rate of 88.86％ in the Fe₃S₄/H₂O₂ was achieved, which compared to 15.58％ obtainable from the Fe₃O₄/H₂O₂, with the apparent rate constant in the Fe₃S₄/H₂O₂ being approximately 65 times over that in the Fe₃O₄/H₂O₂. The better H₂O₂ activation by Fe₃S₄ was attributed to the significant roles of S (-II) and S vacancies in regulating the dissolution of ferrous iron ions, thus generating abundant free •OH radical. In addition, surface bounded ferrous iron of Fe₃S₄ could transfer more electrons to H₂O₂ and O₂ to generate more surface bounded •OH and •O₂^-. This study revealed the combined action of dissolved and surface bounded ferrous iron of greigite on H₂O₂ activation, and provides an efficient heterogeneous H₂O₂ activator for the remediation of organic contaminants in groundwater.

Guest Molecule Insertion-Optimized d-Band Center Position in MoS2 with Improved Sulfite Activation Ability Inspired by Sulfite Oxidase

As a prospective member in the family of advanced oxidation processes (AOPs), heterogeneous sulfite activation shows low cost and high safety for poisonous organic pollutants' degradation. To obtain an efficient sulfite activator, sulfite oxidase (SuO_x), a molybdenum-based enzyme that can prompt oxidation and activation of sulfite, inspired us greatly. Based on the structure of SuO_x, MoS₂/BPE (BPE = 1, 2-bis-(4-pyridyl)-ethylene) is synthesized successfully. In MoS₂/BPE, the BPE molecule is inserted between the MoS₂ layers as a pillar and the N atom links with Mo⁴⁺ directly. MoS₂/BPE shows excellent SuO_x mimic activity. Theoretical calculation implies that BPE insertion optimizes the d-band center position of MoS₂/BPE, which regulates the interaction between MoS₂ and *SO₄^2-. This prompts ^•SO₄^- generation and organic pollutants' degradation. At pH 7.0, its tetracycline degradation efficiency achieved is 93.9% in 30 min. Furthermore, its sulfite activation ability also endows MoS₂/BPE with excellent antibiofouling performance because ^•SO₄^- can kill the microorganisms in water effectively. This work develops a new sulfite activator based on SuO_x. The connection between structure and SuO_x mimic activity and sulfite activation ability is clarified in detail.

Bio-Inspired FeMo2S4 Microspheres as Bifunctional Electrocatalysts for Boosting Hydrogen Oxidation/Evolution Reactions in Alkaline Solution

Developing robust and effectual nonprecious electrocatalysts for the bifunctional hydrogen oxidation and evolution reactions (HOR and HER) in alkaline electrolyte is of critical significance for the realization of future hydrogen economy but challenging. Herein, this work demonstrates a new routine for the preparation of bio-inspired FeMo₂S₄ microspheres via the one-step sulfuration of Keplerate-type polyoxometalate {Mo₇₂Fe₃₀}. The bio-inspired FeMo₂S₄ microspheres feature potential-abundant structural defects and atomically precise iron doping and act as an effective bifunctional electrocatalyst for hydrogen oxidation/reduction reactions. The FeMo₂S₄ catalyst presents an impressive alkaline HOR activity compared to FeS₂ and MoS₂ with the high mass activity of 1.85 mA·mg^-1 and high specific activity as well as excellent tolerance to carbon monoxide poisoning. Meanwhile, FeMo₂S₄ electrocatalyst also displayed prominent alkaline HER activity with a low overpotential of 78 mV at a current density of 10 mA·cm^-2 and robust long-term durableness. Density functional theory (DFT) calculations indicate that the bio-inspired FeMo₂S₄ with a unique electron structure possesses the optimal hydrogen adsorption energy and enhanced adsorption of hydroxyl intermediates, which accelerates the potential-determining Volmer step, thus promoting the HOR and HER performance. This work provides a new pathway for designing efficient noble-metal-free electrocatalysts for the hydrogen economy.

Cobalt mediated perovskite as efficient Fenton-like catalysts for the tetracycline removal over a neutral condition: The importance of superoxide radical

Cobalt mediated perovskite oxides (Ca-Fe-Co-x) were prepared for heterogeneous Fenton-like, which exhibited excellent tetracycline (TC) degradation efficiency and wider pH suitability (3-11). Experimental results showed that Ca-Fe-Co-1.0 sample displayed the highest degradation rate could reach 80.5% under neutral conditions, and maintain at around 80% after four cycles. The analysis of degradation mechanism showed that the redox of Fe²⁺/Fe³⁺ and Co²⁺/Co³⁺ significant enhanced the activation of H₂O₂ to superoxide radical (∙O₂^-). Meanwhile, the hydroxyl radical (∙OH) was also detected by ESR analysis. In addition, the possible degradation pathway and mechanism of TC were deduced via UPLC-QTOF/MS analysis and density functional theory (DFT) calculations. The toxicity of TC and its intermediates were also evaluated by the ECOSAR software. The Ca-Fe-Co-1.0/nanocellulose aerogel (NCA) displayed highly removal efficiency of TC wastewater in the long-term operation conduction. This study provided a feasible method to design and synthesis heterogeneous Fenton-like catalysts for antibiotic degradation.

MoS2/Au Heterojunction Catalyst for SERS Monitoring of a Fenton-like Reaction

Fenton technology is one of advanced oxidation process (AOP) methods to treat wastewater through chemical oxidation. Due to the limitations of classical iron-based catalysts, it is still challenging to find suitable catalysts for Fenton-like reactions. Here, MoS₂/Au heterojunctions were successfully synthesized by reduction of chloroauric acid in the solution of layered MoS₂ prepared by hydrothermal method. As a model molecule, methylene blue (MB) was used as the species to be degraded to evaluate the performance of the catalyst. It was determined by UV-visible spectra that the optimal catalyst can be obtained when MoS₂ (mg): HAuCl₄ (wt. % mL) is 2:2. The Fenton-like reaction process was monitored by introducing highly sensitive surface enhanced Raman spectroscopy (SERS). The results show that MB can be degraded by 83% in the first 10 min of the reaction, indicating that MoS₂/Au has good catalytic performance. In addition, as a fingerprint spectrum, SERS was used to preliminarily analyze the molecular structure changes during the degradation process. The result showed that C-N-C bond was easier to break than the C-S-C bond. NH₂ group and the fused ring were destroyed at the comparable speed at the first 30 min. In terms of application applicability, it was showed that MB degradation had exceeded 95% at all the three pH values of 1.4, 5.0, and 11.1 after the reaction was carried out for 20 min. The test and analysis of the light environment showed that the catalytic efficiency was significantly improved in the natural light of the laboratory compared to dark conditions. The possible mechanism based on ·OH and ·O₂^- from ESR data was proposed. In addition, it was demonstrated to be a first-order reaction from the perspective of kinetics. This study made a positive contribution to broaden of the applicable conditions and scope of Fenton-like reaction catalysts. It is expected to be used as a non-iron catalyst in practical industrial applications. From the perspective of detection method, we expect to develop SERS as a powerful tool for the in situ monitoring of Fenton-like reactions, and to further deepen our understanding of the mechanism.

Oxoiron(IV)-dominated Heterogeneous Fenton-like Mechanism of Fe-Doped MoS2

Oxoiron(IV) species are a critical intermediate in the Fe-based Fenton-like process at circumneutral pH, and its oxidative reactivity is closely related to the ligands. An optional inorganic host material, MoS₂ , is selected to construct a highly reactive sulfur ligand coordinated Fe species in this work. The Fe species doped in MoS₂ is presented as the Fe^II centre and triggers the transformation of the 2H phase to the octahedral 1T phase MoS₂ . The role of the interaction between doped Fe and the MoS₂ host lattice on the formation of oxoiron(IV) is studied. A significant Fenton-like reactivity and a remarkable accumulation of oxoiron(IV) species were observed for Fe-MoS₂ . The quenching experiment was implemented to disclose the predominant role of oxoiron(IV) species in the Fe-MoS₂ /H₂ O₂ Fenton-like system. Furthermore, oxoiron(IV) species could transform into the ⋅O₂ ^- and ¹ O₂ , which further expedites the Fenton-like reaction.

Romo AI, Pudar S, Putnam ST, Bustos E, Rodríguez-López J. Real-Time Detection of Hydroxyl Radical Generated at Operating Electrodes via Redox-Active Adduct Formation Using Scanning Electrochemical Microscopy

The hydroxyl radical (•OH) is one of the most attractive reactive oxygen species due to its high oxidation power and its clean (photo)(electro)generation from water, leaving no residues and creating new prospects for efficient wastewater treatment and electrosynthesis. Unfortunately, in situ detection of •OH is challenging due to its short lifetime (few ns). Using lifetime-extending spin traps, such as 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to generate the [DMPO-OH]• adduct in combination with electron spin resonance (ESR), allows unambiguous determination of its presence in solution. However, this method is cumbersome and lacks the necessary sensitivity and versatility to explore and quantify •OH generation dynamics at electrode surfaces in real time. Here, we identify that [DMPO-OH]• is redox-active with E0 = 0.85 V vs Ag|AgCl and can be conveniently detected on Au and C ultramicroelectrodes. Using scanning electrochemical microscopy (SECM), a four-electrode technique capable of collecting the freshly generated [DMPO-OH]• from near the electrode surface, we detected its generation in real time from operating electrodes. We also generated images of [DMPO-OH]• production and estimated and compared its generation efficiency at various electrodes (boron-doped diamond, tin oxide, titanium foil, glassy carbon, platinum, and lead oxide). Density functional calculations, ESR measurements, and bulk calibration using the Fenton reaction helped us unambiguously identify [DMPO-OH]• as the source of redox activity. We hope these findings will encourage the rapid, inexpensive, and quantitative detection of •OH for conducting informed explorations of its role in mediated oxidation processes at electrode surfaces for energy, environmental, and synthetic applications.

Enhancing Tumor Catalytic Therapy by Co-Catalysis

Fenton reactions have been recently applied in tumor catalytic therapy, whose efficacy suffers from the unsatisfactory reaction kinetics of Fe³⁺ to Fe²⁺ conversion. Here we introduce a co-catalytic concept in tumor catalytic therapy by using a two-dimensional molybdenum disulfide (MoS₂ ) nanosheet atomically dispersed with Fe species. The single-atom Fe species act as active sites for triggering Fenton reactions, while the abundant sulfur vacancies generated on the nanosheet favor electron capture by hydrogen peroxide for promoting hydroxyl radical production. Moreover, the 2D MoS₂ support also acts as a co-catalyst to accelerate the conversion of Fe³⁺ to Fe²⁺ by the oxidation of active Mo⁴⁺ sites to Mo⁶⁺ , thereby promoting the whole catalytic process. The 2D nanocatalyst exhibits a desirable catalytic performance, as well as a significantly enhanced anticancer efficacy both in vitro and in vivo, which indicates the feasibility for applying such a co-catalytic concept in tumor therapy.

Simultaneous Nitrite Resourcing and Mercury Ion Removal Using MXene-Anchored Goethite Heterogeneous Fenton Composite

The integrated system of gas-phase advanced oxidation process combined with sulfite-based wet absorption process is a desirable method for simultaneous removal of SO₂, NO, and Hg⁰, but due to the enrichment of nitrite and Hg²⁺, resourcing harmless wastewater is still a challenge. To tackle this problem, this study fabricated a bifunctional β-FeOOH@MXene heterogeneous Fenton material, of which the crystalline phase, morphology, structure, and composition were revealed by using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy-energy dispersive x-ray spectroscopy, and transmission electron microscopy. It exhibits excellent performance on nitrite oxidation (99.5%) and Hg²⁺ removal (99.7%) and can maintain stable outstanding ability after 13 cycles, with superior Hg²⁺ adsorption capacity (395 mg/g) and ultralow Fe leaching loss (<0.018 wt %). The synergism between MXene and β-FeOOH appears as follows: (i) MXene, as an inductive agent, directionally converted Fe₂O₃ into β-FeOOH in the hydrothermal method and greatly reduced its monomer size; (ii) the introduced ≡Ti(III)/≡Ti(II) accelerated the regeneration of ≡Fe(II) via rapid electron transfer, thereby improving the heterogeneous Fenton reaction; and (iii) MXene strongly immobilized β-FeOOH to greatly inhibit Fe-leaching. HO^•, ^•O₂^--, and ¹O₂ were the main radicals identified by electron spin resonance. Radical quenching tests showed their contributions to NO₂^- oxidation in the descending order HO^• > ¹O₂ > ^•O₂^-. Quantum chemical calculations revealed that ^•OH-induced oxidation of NO₂^- or HNO₂ was the primary reaction path. Density functional theory calculations combined with X-ray photoelectron spectroscopy and Raman characterizations displayed the Hg²⁺ removal mechanism, with Hg₂Cl₂, HgCl₂, and HgO as the main byproducts. This novel material provides a new strategy for resourcing harmless wastewater containing nitrite and Hg²⁺.

Chemoenzymatic Cascade Reaction for Green Cleaning of Polyamide Nanofiltration Membrane

Chemical cleaning is indispensable for the sustainable operation of nanofiltration (NF) in wastewater treatment. However, the common chemical cleaning methods are plagued by low cleaning efficiency, high chemical consumption, and separation performance deterioration. In this work, a chemoenzymatic cascade reaction is proposed for pollutant degradation and polyamide NF membrane cleaning. Glucose oxidase (GOD) enzymatic reaction in this cascade system produces hydrogen peroxide (H₂O₂) and gluconic acid to trigger the oxidation of foulants by Fe₃O₄-catalyzed Fenton reaction. By virtue of the microenvironment (pH and H₂O₂ concentration) engineering and substrate enrichments, this chemoenzymatic cascade reaction (GOD-Fe₃O₄) exhibits a favorable degradation efficiency for bisphenol A and methyl blue (MB). Thanks to the strong oxidizing degradation, the water flux of the NF10 membrane fouled by MB is almost completely recovered (∼95.8%) after a 3-cycle fouling/cleaning experiment. Meanwhile, the chemoenzymatic cascade reaction improves the applicability of the Fenton reaction in polyamide NF membrane cleaning because it prevents the membrane from damaging by high concentration of H₂O₂ and inhibits the secondary fouling caused by ferric hydroxide precipitates. By immobilizing GOD on the aminated Fe₃O₄ nanoparticles, a reusable cleaning agent is prepared for highly efficient membrane cleaning. This chemoenzymatic cascade reaction without the addition of an acid/base/oxidant provides a promising candidate for sustainable and cost-effective cleaning for the polyamide NF membrane.

Recent advances in MoS2-based materials for electrocatalysis

The increasing energy demand and related environmental issues have drawn great attention of the world, thus necessitating the development of sustainable technologies to preserve the ecosystems for future generations. Electrocatalysts...

Supermagnetic Mn-substituted ZnFe2O4 with AB-site hybridization for the ultra-effective catalytic degradation of azoxystrobin

Magnetic Zn0.25Mn0.75Fe2O4 was applied to the degradation of azoxystrobin in a Fenton-like system, and the performance was enhanced via crystal structure control.

Synthesis and characterization of MoxFe1−xO nanocomposites for the ultra-fast degradation of methylene blue via a Fenton-like process: a green approach

A detailed degradation study of methylene blue within 22 minutes by the green synthesis of MoxFe1−xO nanocomposites using Punica granatum peel extract.