Mechanically Coherent Zeolite 13X/Chitosan Aerogel Beads for Effective CO2 Capture

Novel chitosan-zeolite X composite beads prepared by phase-inversion method for CO2 adsorptive capture

The urgent need to mitigate carbon emissions from industrial heat production has led to the exploration of novel carbon-based materials for carbon capture. Chitosan, a versatile framework, has been widely utilized for embedding many materials such as grafted graphene oxide, zeolite, and activated carbon to enhance the carbon capture capacity of diverse carbon-based materials. Remarkably, the combination of chitosan and zeolite overcomes the inherent drawbacks of powdery zeolite, resulting in improved stability and efficiency in carbon capture applications. In this study, zeolite X-chitosan composite was successfully synthesized using phase inversion method followed by solvent exchange and air drying. The synthesis procedure described in this study presents a notable advantage in terms of simplicity and ease of fabrication. The combination of SEM and XRD analyses provided evidence that the composite exhibited a uniform arrangement of zeolite within the chitosan framework and maintained the original properties of the powdered zeolite. The adsorption capacity of the composite was first investigated by varying mass ratio of zeolite per chitosan. The composite with mass ratio that gave the best adsorption capacity were then tested under various temperatures (-20 °C, 0 °C, 30 °C, and 50 °C) and pressures (1 kPa, 3 kPa, 5 kPa, and 30 kPa). The application of different adsorption models was also employed to simulate the breakthrough curves. Furthermore, the material also underwent multiple continuous adsorption-desorption cycles showing its potential for repeated rechargeability. In contrast, the synthesis and characterization of copper ion-exchanged composite yielded significant drop in adsorption capacity, likely due to the formation of ligands or the inherent reactivity of Cu2+ ions towards hydroxide.

Chitosan modified multi-walled carbon nanotubes and arginine aerogel for enhanced carbon capture

Global warming is emerging as a significant issue because of increasing CO2 levels in the atmosphere due to urbanization, industrialization, and fossil-fuel usage. Therefore, reducing atmospheric CO2 levels using new materials with high carbon capture capacity and efficient CO2 capture technologies is essential. Herein, we propose a hybrid chitosan (CS) aerogel containing multi-walled carbon nanotubes (MWCNTs) and an arginine (Arg) aerogel (CSCNTArg aerogel) for efficient carbon capture. This aerogel was successfully synthesized using a cross-linker reagent via step-freeze drying method. Fourier-transform infrared spectroscopy and X-ray diffraction analyses confirmed the successful grafting of CS, MWCNTs, and Arg onto the CSCNTArg aerogel. The thermogravimetric analysis (TGA) confirmed good thermal stability up to 500 °C of the as-developed aerogel. Field-emission scanning electron microscopy showed that the surface morphology of the CSCNTArg aerogel differed from that of CS, Arg, and MWCNTs with pores on their surfaces. N2 and CO2 adsorption-desorption studies on the CSCNTArg aerogel were performed using the Brunauer-Emmett-Teller method and TGA, respectively. The CSCNTArg aerogel showed a high adsorption capacity of approximately 5.00 mmol g-1 at 35 °C. Therefore, this new material may be useful for facilitating high-efficiency CO2 adsorption to reduce atmospheric carbon footprint.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Synthesis, Characterization and Application of Amine-Functionalized Hierarchically Micro-Mesoporous Silicon Composites for CO2 Capture in Flue Gas

An efficient CO₂ adsorbent with a hierarchically micro-mesoporous structure and a large number of amine groups was fabricated by a two-step synthesis technique. Its structural properties, surface groups, thermal stability and CO₂ adsorption performance were fully investigated. The analysis results show that the prepared CO₂ adsorbent has a specific hierarchically micro-mesoporous structure and highly uniformly dispersed amine groups that are favorable for the adsorption of CO₂. At the same time, the CO₂ adsorption capacity of the prepared adsorbent can reach a maximum of 3.32 mmol-CO₂/g-adsorbent in the actual flue gas temperature range of 303-343 K. In addition, the kinetic analysis results indicate that both the adsorption process and the desorption process have rapid adsorption/desorption rates. Finally, the fitting of the CO₂ adsorption/desorption experimental data by Avrami's fractional kinetic model shows that the CO₂ adsorption rate is mainly controlled by the intra-particle diffusion rate, and the temperature has little effect on the adsorption rate.

Porous Aerogels and Adsorption of Pollutants from Water and Air: A Review

Aerogels are open, three-dimensional, porous materials characterized by outstanding properties, such as low density, high porosity, and high surface area. They have been used in various fields as adsorbents, catalysts, materials for thermal insulation, or matrices for drug delivery. Aerogels have been successfully used for environmental applications to eliminate toxic and harmful substances-such as metal ions or organic dyes-contained in wastewater, and pollutants-including aromatic or oxygenated volatile organic compounds (VOCs)-contained in the air. This updated review on the use of different aerogels-for instance, graphene oxide-, cellulose-, chitosan-, and silica-based aerogels-provides information on their various applications in removing pollutants, the results obtained, and potential future developments.

Chitosan/Zeolite Composite Aerogels for a Fast and Effective Removal of Both Anionic and Cationic Dyes from Water

Organic dyes are extensively used in many industrial sectors, and their uncontrolled disposal into wastewaters raises serious concerns for environmental and human health. Due to the large variety of such pollutants, an effective remediation strategy should be characterized by a broad-spectrum efficacy. A promising strategy is represented by the combination of different adsorbent materials with complementary functionalities to develop composite materials that are expected to remove different contaminants. In the present work, a broad-spectrum adsorbent was developed by embedding zeolite 13X powder (ZX) in a chitosan (CS) aerogel (1:1 by weight). The CS–ZX composite adsorbent removes both anionic (indigo carmine, IC) and cationic (methylene blue, MB) dyes effectively, with a maximum uptake capacity of 221 mg/g and 108 mg/g, respectively. In addition, the adsorption kinetics are rather fast, with equilibrium conditions attained in less than 2 h. The composite exhibits good mechanical properties in both dry and wet state, which enables its handling for reusability purposes. In this regard, preliminary tests show that the full restoration of the IC removal ability over three adsorption–desorption cycles is achieved using a 0.1 M NaOH aqueous solution, while a 1 M NaCl aqueous solution allows one to preserve >60% of the MB removal ability.