Colorimetric Ionic Organohydrogels Mimicking Human Skin for Mechanical Stimuli Sensing and Injury Visualization

Developing Safe Organohydrogel Sunscreens Using Polyelectrolyte-Betaine Surfactant Complexes

Oil-in-water emulsions are extensively used in skincare products due to their improved texture, stability, and effectiveness. There is limited success in developing effective delivery systems that can selectively target the active sunscreen ingredients onto the skin surface. Herein, an organohydrogel was prepared by physical cross-linking of an oil-in-water nanoemulsion with chitosan under neutral pH conditions. In the presence of a small quantity of coconut oil, lauramidopropyl betaine and glycerol were able to emulsify the active sunscreen ingredients into nanoscale droplets with enhanced ultraviolet light absorption. A facile pH-triggered interfacial cross-linking approach was applied to transform the nanoemulsion into an organohydrogel sunscreen. Furthermore, the organohydrogel sunscreen displayed encouraging characteristics including efficient UV-blocking capacity, resistance to water, simple removal, and minimal skin penetration. This facile approach provides an effective pathway for scaling up the organohydrogels, which are highly suitable for the safe application of sunscreen.

Transient regulation of gel properties by chemical reaction networks

Transient regulation of gel properties by chemical reaction networks (CRNs) represents an emerging and effective strategy to program or temporally control the structures, properties, and functions of gel materials in a self-regulated manner. CRNs provide significant opportunities to construct complex or sustainable gels with excellent dynamic features, thus expanding the application scope of these materials. CRN-based methods for transiently regulating the gel properties are receiving increasing attention, and the related fields are worth further studying. This feature article focuses on the CRN-mediated transient regulation of six properties of gels, which are transient gelation, transient liquefaction of gels, transient assembly of macroscopic gels, temporary actuation of gels, transient healing ability of kinetically inert gels, and cascade reaction-based self-reporting of external stimuli. Recent advances that showcase the six properties of gels controlled by CRNs are featured, the characterization and structural elucidation of gels are detailed, and the significance, achievements, and expectations of this field are discussed. The strategy of transient regulation of gel properties via CRNs is potentially useful for building the next generation of adaptive functional materials.

Mechanochromic Self-Healing Materials with Good Stretchability, Shape Memory Behavior, Cyclability, and Reversibility Based on Multiple Hydrogen Bonds

It is challenging to develop materials with room-temperature self-healing ability and mechanochromic response from mechanical stimuli to optical signals by a facile and simple preparation process. Herein, novel mechanochromic self-healing materials were designed by a simple synthesis procedure, balancing the mechanical properties, self-healing, stretchability, and mechanochromic response. Moreover, we designed and prepared the mechanochromic self-healing materials with different soft and hard segments by introducing multiple hydrogen bonds into the network, improving the mechanical properties and self-healing efficiency. In addition, the optimized sample exhibited good shape memory behavior (shape recovery ratio of 94.4%), self-healing properties (healed by pressing during stretching process), high tensile strength (17.6 MPa), superior stretchability (893%), fast mechanochromic response (strain of 272%), and great cyclic stretching-relaxing properties (higher than 10 times at strain of 300%). Above all, mechanochromic self-healing materials have promising potential in various fields, such as stress sensing, inkless writing, damage warning, deformation detection, and damage distribution.

Dual-Mode Fiber Strain Sensor Based on Mechanochromic Photonic Crystal and Transparent Conductive Elastomer for Human Motion Detection

As an important component of wearable and stretchable strain sensors, dual-mode strain sensors can respond to deformation via optical/electrical dual-signal changes, which have important applications in human motion monitoring. However, realizing a fiber-shaped dual-mode strain sensor that can work stably in real life remains a challenge. Here, we design an interactive dual-mode fiber strain sensor with both mechanochromic and mechanoelectrical functions that can be applied to a variety of different environments. The dual-mode fiber is produced by coating a transparent elastic conductive layer onto photonic fiber composed of silica particles and elastic rubber. The sensor has visualized dynamic color change, a large strain range (0-80%), and a high sensitivity (1.90). Compared to other dual-mode strain sensors based on the photonic elastomer, our sensor exhibits a significant advantage in strain range. Most importantly, it can achieve reversible and stable optical/electrical dual-signal outputs in response to strain under various environmental conditions. As a wearable portable device, the dual-mode fiber strain sensor can be used for real-time monitoring of human motion, realizing the direct interaction between users and devices, and is expected to be used in fields such as smart wearable, human-machine interactions, and health monitoring.

Mechanochromic Optical/Electrical Skin for Ultrasensitive Dual-Signal Sensing

Following earlier research efforts dedicated to the realization of multifunctional sensing, recent developments of artificial skins endeavor to go beyond human sensory functions by integrating interactive visualization of strain and pressure stimuli. Inspired by the microcracked structure of spider slit organs and the mechanochromic mechanism of chameleons, this work aims to design a flexible optical/electrical skin (OE-skin) capable of responding to complex stimuli with interactive feedback of human-readable structural colors. The OE-skin consists of an ionic electrode combined with an elastomer dielectric layer, a chromotropic layer containing photonic crystals and a conductive carbon nanotube/MXene layer. The electrode/dielectric layers function as a capacitive pressure sensor. The mechanochromic photonic crystals of ferroferric oxide-carbon magnetic arrays embedded in the gelatin/polyacrylamide stretchable hydrogel film perceive strain and pressure stimuli with bright color switching outputs in the full visible spectrum. The underlying microcracked conductive layer is devoted to ultrasensitive strain sensing with a gauge factor of 191.8. The multilayered OE-skin delivers an ultrafast, accurate response for capacitive pressure sensing with a detection limit of 75 Pa and long-term stability of 5000 cycles, while visualizing complex deformations in the form of high-resolution spatial colors. These findings offer deep insights into the rational design of OE-skins as multifunctional sensing devices.

Multicolor Mechanochromic Epoxy Thermosets That Recognize the Intensity, Type, and Duration of Mechanical Stimulation

Mechanochromic polymers that exhibit multiple color changes under external mechanical stimulation show great potential for sensor applications. Herein, an epoxy thermoset that can reveal the intensity, type, and duration of mechanical stimulation via a combination of disulfide (DS) and rhodamine (Rh) mechanochromophores is reported. A unique multicolor transition occurs upon ball mill or manual grinding because of the different activation energies of DS and Rh. The epoxy changes color depending on the ball mill grinding duration. Simultaneous activation occurs with a mechanochromic time lag between DS and Rh, and the collision energy strongly affects the relative intensity. A more dramatic multicolor response is observed using a mortar and pestle, as sequential activation occurs upon gentle and strong grinding. Various types of mechanical stimulation can cause different aggregates of the activated Rh moiety and vary the relative mechanosensitivities of Rh and DS, which lead to a different color response.

A review related to MXene preparation and its sensor arrays of electronic skins

MXenes have been flourishing over the last decade as a high-performance 2D material, which combines the advantages of high electrical conductivity, photothermal conversion, and easy dispersion. They have been used to create soft, highly conductive, self-healing, and tactile-simulating electronic skins (E-skins). However, these E-skins remain generally limited to one or two functions with a complex preparation process. Next-generation E-skins necessitate not only large-scale fabrication using simple and fast methods but also the integration of multiple sensing functions and signal analysis components in order to provide functionality that was not unattainable in the past. Starting with the synthesis of pure MXenes, we walk through the steps of designing MXene sensors, integrating electronic skin arrays, and determining the function of MXene-based electronic skins. We also summarise the problems with existing MXene-based E-skins and possible futuristic directions.

A high-conductive, anti-freezing, antibacterial and anti-swelling starch-based physical hydrogel for multifunctional flexible wearable sensors

Flexible wearable sensors based on conductive hydrogels are attracting increasing interest. To meet the urgent demands of sustainability and eco-friendliness, biopolymer-based physically crosslinked hydrogels have drawn great attention. Starch has a great potential due to its renewability, biocompatibility, nontoxicity and low cost. However, poor mechanical property, low conductivity and lack of versatility are seriously limiting the applications of starch-based hydrogels in wearable sensors. Moreover, the development of starch hydrogel-based wearable sensors in harsh conditions remains a challenge. Herein, multifunctional and physical crosslinking hydrogels were developed by introducing ionic liquid (1-ethyl-3-methyl imidazolium acetate) and metal salt (AlCl₃) into starch/polyvinyl alcohol double-network structure. The hydrogel exhibited excellent stretchability (567%), tensile strength (0.53 MPa), high conductivity (2.75 S·m^-1), good anti-freezing, antibacterial and anti-swelling properties. A wearable sensor assembled from the starch-based hydrogel exhibited a wide working range, high sensitivity (gauge factor: 5.93) and excellent reversibility. Due to the versatility, the sensor effectively detected human motion in normal and underwater environment, and possessed a sensitive pressure and thermal response. Overall, the present work provided a promising route to develop multifunctional and "green" biopolymer-based hydrogels for wearable sensors in human health and sporting applications.

Materials with Tunable Optical Properties for Wearable Epidermal Sensing in Health Monitoring

Advances in wearable epidermal sensors have revolutionized the way that physiological signals are captured and measured for health monitoring. One major challenge is to convert physiological signals to easily readable signals in a convenient way. One possibility for wearable epidermal sensors is based on visible readouts. There are a range of materials whose optical properties can be tuned by parameters such as temperature, pH, light, and electric fields. Herein, this review covers and highlights a set of materials with tunable optical properties and their integration into wearable epidermal sensors for health monitoring. Specifically, the recent progress, fabrication, and applications of these materials for wearable epidermal sensors are summarized and discussed. Finally, the challenges and perspectives for the next generation wearable devices are proposed.

Temperature-Sensitive Anti-Inflammatory Organohydrogels Containing Janus Particle Stabilized Phase-Change Microinclusions

A fabrication strategy for multifunctional organohydrogels is proposed, which combines phase-change microinclusions within a double-network (DN) hydrogel under the stabilization of Janus particles. Janus particles possess reactivity and colloidal stability for more robust organohydrogels, while the interstice among Janus particles enhances the mass transfer between the phase interfaces. Moreover, DN hydrogels are achieved through dynamic cross-linking networks, endowing organohydrogels with injectability and self-healing performance. Phase-change microinclusions are beneficial to the organohydrogels with temperature-responsive mechanical property and temperature-programed shape-memory performance. Organohydrogels can be employed for temperature therapy through the melting-crystallization process of phase-change microinclusions. Simultaneously, the payloads within microinclusions can be released for antibacteria upon melting the encapsulated wax. The organohydrogels can be served as an ideal dressing with temperature-responsive mechanical property, temperature therapy effectiveness, and temperature-triggered antibacterial ability.

Bioinspired Semicrystalline Dynamic Ionogels with Adaptive Mechanics and Tactile Sensing

A biological system shows dynamical shapes and tunable mechanical states while working as an actuator and/or sensor. To simulate this, we prepared semicrystalline dynamic ionogels (SDIGs) via a facile process by introducing crystallized polymer domains for phase change and amorphous domains for ionic liquid loading into ionogels. The obtained SDIGs offered tunable mechanical properties upon temperature switching with a change in modulus up to 2 orders of magnitude. It also showed an excellent shape memory effect, shape programmability, and melting accelerated conductivity increase. Enabled by ionic Joule heating technique, the ionogel provided an electrical triggered actuating process to mimic flower blossoming. Moreover, it was demonstrated as a touch sensor with various working shape states, indicating cyclic and green utilization. This work provides insights into the design of semicrystalline electronics and is believed to promote the development of biomimetic actuators and sensors.

Mechanochromophore-linked Polymeric Materials with Visible Color Changes

Mechanical force as a type of stimuli for smart materials has obtained much attention in the past decade. Color-changing materials in response to mechanical stimuli have shown great potential in the applications such as sensors and displays. Mechanochromophore-linked polymeric materials, which are a growing sub-class of these materials, are discussed in detail in this review. Two main types of mechanochromophores which exhibit visible color change, summarized herein, involve either isomerization or radical generation mechanisms. This review focuses on their synthesis and incorporation into polymer matrices, the type of mechanical force used, factors affecting the mechanochromic properties, and their applications. This article is protected by copyright. All rights reserved.