Advanced Oxygen Electrocatalyst for Air-Breathing Electrode in Zn-Air Batteries

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Synergistic Pore Structure and Active Site Modulation in Co-N-C Catalysts Enabling Stable Zinc-Air Batteries

Development of cheap, highly active, and durable nonprecious metal-based oxygen electrocatalysts is essential for metal-air battery technology, but achieving the balance of oxygen evolution reaction (OER)/oxygen reduction reaction (ORR) bifunctional performance and long-term durability is still a great challenge. Using a typical Co-N-C catalyst as a model, herein, we introduced ammonium chloride into nitrogen-doped carbon materials containing metal elements during the pyrolysis process (Co-N-C/AC), which not only increases the active area but also realizes the accurate customization of the active site (pyridine nitrogen and cobalt oxide species) so as to achieve the balance of the OER/ORR bifunctional sites. The synthesized Co-N-C/AC bifunctional catalyst with a three-dimensional porous structure exhibits a smaller potential gap of 0.72 V. The peak power density of the aqueous cell at a current density of 308 mA cm-2 is 203 mW cm-2. The cycle life (≈3900 h) is longer than those of other recently reported aqueous Zn-air batteries (ZABs). The peak power density of the Co-N-C/AC-based quasi-solid-state ZAB reaches 550 mW cm-2 for ∼72 h. This work shows a feasible path for the practical application of ZABs by balancing the bifunctional electrocatalysts by tailoring the active site reasonably.

Bioelectrochemical cascade reaction for energy-saving hydrogen production and innovative Zn-air batteries

The oxygen evolution reaction (OER) is an important half-reaction in electrochemical hydrogen production (EHP) and rechargeable metal-air batteries. However, the sluggish OER kinetics has seriously impeded their performance. Herein, we report a bioelectrochemical cascade system composed of glucose oxidase (GOx)-functionalized N-doped porous carbon nanofibers to replace OER in EHP and rechargeable Zn-air batteries (ZABs) applications. In this cascade system, GOx catalyzes oxidation of glucose to produce value-added gluconic acid accompanied with the generation of H2O2 under aerobic conditions. The subsequent electrocatalytic oxidation of H2O2 replacing the OER results in an onset voltage below 1.10 V for EHP, and a low charging voltage of 1.35 V as well as a small charging/discharging voltage gap of ∼ 280 mV over 170 h for ZABs in neutral aqueous electrolytes. The advantages of employing the innovative bioelectrochemical cascade reaction are demonstrated in EHP and ZABs, achieving the full utilization of biomass energy in energy-saving electrochemical systems for energy storage and conversion.

Performance of Nitrogen-Doped Carbon Nanoparticles Carrying FeNiCu as Bifunctional Electrocatalyst for Rechargeable Zinc-Air Battery

Catalysts for zinc-air batteries (ZABs) must be stable over long-term charging-discharging cycles and exhibit bifunctional catalytic activity. In this study, by doping nitrogen-doped carbon (NC) materials with three metal atoms (Fe, Ni, and Cu), a single-atom-distributed FeNiCu-NC bifunctional catalyst is prepared. The catalyst includes Fe(Ni-doped)-N4 for the oxygen evolution reaction (OER), Fe(Cu-doped)-N4 for the oxygen reduction reaction (ORR), and the NiCu-NC catalytic structure for the oxygen reduction reaction (ORR) in the nitrogen-doped carbon nanoparticles. This single-atom distribution catalyst structure enhances the bifunctional catalytic activity. If a trimetallic single-atom catalyst is designed, it will surpass the typical bimetallic single-atom catcalyst. FeNiCu-NC exhibits outstanding performance as an electrocatalyst, with a half-wave potential (E1/2) of 0.876 V versus RHE, overpotential (Ej = 10) of 253 mV versus RHE at 10 mA cm-2, and a small potential gap (ΔE = 0.61 V). As the anode in a ZAB, FeNiCu-NC can undergo continuous charge-discharged cycles for 575 h without significant attenuation. This study presents a new method for achieving high-performance, low-cost ZABs via trimetallic single-atom doping.

Atomic Molybdenum Nanomaterials for Electrocatalysis

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Single-Atomic Co-N4 Sites with CrCo Nanoparticles for Metal-Air Battery-Driven Hydrogen Evolution

Designing highly active and robust earth abundant trifunctional electrocatalysts for energy storage and conversion applications remain an enormous challenge. Herein, we report a trifunctional electrocatalyst (CrCo/CoN4@CNT-5), synthesized at low calcination temperature (550 °C), which consists of Co-N4 single atom and CrCo alloy nanoparticles and exhibits outstanding electrocatalytic performance for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. The catalyst is able to deliver a current density of 10 mA cm-2 in an alkaline electrolytic cell at a very low cell voltage of ∼1.60 V. When the catalyst is equipped in a liquid rechargeable Zn-air battery, it endowed a high open-circuit voltage with excellent cycling durability and outperformed the commercial Pt/C+IrO2 catalytic system. Furthermore, the Zn-air battery powered self-driven water splitting system is displayed using CrCo/CoN4@CNT-5 as sole trifunctional catalyst, delivering a high H2 evolution rate of 168 μmol h-1. Theoretical calculations reveal synergistic interaction between Co-N4 active sites and CrCo nanoparticles, favoring the Gibbs free energy for H2 evolution. The presence of Cr not only enhances the H2O adsorption and dissociation but also tunes the electronic property of CrCo nanoparticles to provide optimized hydrogen binding capacity to Co-N4 sites, thus giving rise to accelerated H2 evolution kinetics. This work highlights the importance of the presence of small quantity of Cr in enhancing the electrocatalytic activity as well as robustness of single-atom catalyst and suggests the design of the multifunctional robust electrocatalysts for long-term H2 evolution application.

Experimental and Theoretical Investigation of the Mechanism of the Reduction of O2 from Air to O22- by VIVO2+-N,N,N-Amidate Compounds and Their Potential Use in Fuel Cells

The two-electron reductive activation of O2 to O22- is of particular interest to the scientific community mainly due to the use of peroxides as green oxidants and in powerful fuel cells. Despite of the great importance of vanadium(IV) species to activate the two-electron reductive activation of O2, the mechanism is still unclear. Reaction of VIVO2+ species with the tridentate-planar N,N,N-carboxamide (ΗL) ligands in solution (CH3OH:H2O) under atmospheric O2, at room temperature, resulted in the quick formation of [VV(═O)(η2-O2)(κ3-L)(H2O)] and cis-[VV(═O)2(κ3-L)] compounds. Oxidation of the VIVO2+ complexes with the sterically hindered tridentate-planar N,N,N-carboxamide ligands by atmospheric O2 gave only cis-[VV(═O)2(κ3-L)] compounds. The mechanism of formation of [VV(═O)(η2-O2)(κ3-L)(H2O)] (I) and cis-[VV(═O)2(κ3-L)] (II) complexes vs time, from the interaction of [VIV(═O)(κ3-L)(Η2Ο)2]+ with atmospheric O2, was investigated with 51V, 1H NMR, UV-vis, cw-X-band EPR, and 18O2 labeling IR and resonance Raman spectroscopies revealing the formation of a stable intermediate (Id). EPR, MS, and theoretical calculations of the mechanism of the formation of I and II revealed a pathway, through a binuclear [VIV(═O)(κ3-L)(H2O)(η1,η1-O2)VIV(═O)(κ3-L)(H2O)]2+ intermediate. The results from cw-EPR, 1H NMR spectroscopies, cyclic voltammetry, and the reactivity of the complexes [VIV(═O)(κ3-L)(Η2Ο)2]+ toward O2 reduction fit better to an intermediate with a binuclear nature. Dynamic experiments in combination with computational calculations were undertaken to fully elucidate the mechanism of the O2 reduction to O22- by [VIV(═O)(κ3-L)(Η2Ο)2]+. The galvanic cell {Zn|VIII,VII||Id, [VIVO(κ3-L)(H2O)2]+|O2|C(s)} was manufactured, demonstrating the important applicability of this new chemistry to Zn|H2O2 fuel cells technology generating H2O2 in situ from the atmospheric O2.

Fe3 C/Fe Decorated N-doped Carbon Derived from Tetrabutylammonium tetrachloroferrate Complex as Bifunctional Electrocatalysts for ORR, OER and Zn-Air Batteries in Alkaline Medium

The emergence of non-precious metal-based robust and economic bifunctional oxygen electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for the rational design of commercial rechargeable Zn-air batteries (RZAB) with safe energy conversion and storage systems. Herein, a facile strategy to fabricate a cost-efficient, bifunctional oxygen electrocatalyst Fe3 C/Fe decorated N doped carbon (FeC-700, the catalyst prepared at carbinization temperature of 700 °C) with a unique structure has been developed by carbonization of a single source precursor, tetrabutylammonium tetrachloroferrate(III) complex. The ORR and OER activity revealed excellent performance (ΔE=0.77 V) of the FeC-700 electrocatalyst, comparable to commercial Pt/C and RuO2, respectively. The designed temperature-tuneable structure provided sufficiently accessible active sites for the continuous passage of electrons by shortening the mass transfer pathway, leading to extremely durable electrocatalysts with high ECSA and amazing charge transfer performance. Remarkably, the assembled Zn-air batteries with the FeC-700 catalyst as the bifunctional air electrode delivers gratifying charging-discharging ability with an impressive power density of 134 mW cm-2 with a long lifespan, demonstrating prodigious possibilities for practical application.

Surface Tailoring-Modulated Bifunctional Oxygen Electrocatalysis with CoP for Rechargeable Zn-Air Battery and Water Splitting

The transition metal phosphide (TMP)-based functional electrocatalysts are very promising for the development of electrochemical energy conversion and storage devices including rechargeable metal-air batteries and water electrolyzer. Tuning the electrocatalytic activity of TMPs is one of the vital steps to achieve the desired performance of these energy devices. Herein, we demonstrate the modulation of the bifunctional oxygen electrocatalytic activity of nitrogen-doped carbon-encapsulated CoP (CoP@NC) nanostructures by surface tailoring with ultralow amount (0.56 atomic %) of Ru nanoparticles (2.5 nm). The CoP at the core and the Ru nanoparticles on the shell have a facile charge transfer interaction with the encapsulating NC. The strong coupling of Ru with CoP@NC boosts the electrocatalytic performance toward oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions. The surface-tailored catalyst requires only 35 mV to deliver the benchmark current density of 10 mA·cm-2 for HER. A small potential gap of 620 mV between ORR and OER is achieved, making the catalyst highly suitable for the development of rechargeable zinc-air batteries (ZABs). The homemade ZAB delivers a specific capacity of 780 mA·hgZn-1 and peak power density of 175 mW·cm-2 with a very small voltaic efficiency loss (1.1%) after 300 cycles. The two-electrode water splitting cell (CoP@NC-Ru||CoP@NC-Ru) delivers remarkably low cell voltage of 1.47 V at the benchmark current density. Stable current density of 25 mA·cm-2 for 25 h without any significant change is achieved. Theoretical studies support the charge transfer interaction-induced enhanced electrocatalytic activity of the surface-tailored nanostructure.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

Enhancement of Electrocatalytic Oxygen Reduction Reaction and Oxygen Evolution Reaction by Introducing Lanthanum Species in the Carbon Shell

The development of cost-effective non-noble metal electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) opens up the possibility for sustainable energy systems. Herein, we report a surface overcoating strategy with lanthanum organic complex (La-OC) as the precursor to prepare lanthanum species (La-SPc) encapsulated in nitrogen, fluorine, and sulfur self-doped porous carbon (NFS-PC) composites (La-SPc@NFS-PC) for efficient ORR and OER. The La-SPc is introduced not only as a promoter to increase the electrochemical stability of the La-SPc@NFS-PC catalysts but also to tailor the electronic structure of NFS-PC due to the unique electrochemical properties of La-SPc. In addition, the integration of La-SPc and NFS-PC can improve the electronic conductivity of composites by inducing electron redistribution and lowering the band gap, which is advantageous in enhancing the kinetics of charge transfer. Simultaneously, benefiting from the optimized porous structure and positive cooperation of La-SPc with NFS-PC shells, the obtained La-SPc@NFS-PC-3 delivers robust bifunctional ORR/OER activities and stabilities. More importantly, the Zn-air battery (ZAB) assembled with La-SPc@NFS-PC-3 demonstrates an outstanding power density (181.1 mW cm-2) and long cycling life, outperforming the commercial Pt/C. This work offers a rational approach to preparing high-efficiency rare-earth-based catalysts and provides potential applications in ZABs.

Pyrolysis Enzymolysis-Treated Pomelo Peel: Porous Carbon Materials with Fe-Nx Sites for High-Performance Supercapacitor and Efficient Oxygen Reduction Applications

This paper proposes a different strategy for deriving carbon materials from biomass, abandoning traditional strong corrosive activators and using a top-down approach with a mild green enzyme targeted to degrade the pectin matrix in the inner layer of pomelo peel cotton wool, inducing a large number of nanopores on its surface. Meanwhile, the additional hydrophilic groups produced via an enzymatic treatment can be used to effectively anchor the metallic iron atoms and prepare porous carbon with uniformly dispersed Fe-Nx structures, in this case optimizing sample PPE-FeNPC-900's specific surface area by up to 1435 m2 g-1. PPE-FeNPC-900 is used as the electrode material in a 6 M KOH electrolyte; it manifests a decent specific capacitance of 400 F g-1. The assembled symmetrical supercapacitor exhibits a high energy density of 12.8 Wh kg-1 at a 300 W kg-1 power density and excellent cycle stability. As a catalyst, it also exhibits a half-wave potential of 0.850 V (vs. RHE) and a diffusion-limited current of 5.79 mA cm-2 at 0.3 V (vs. RHE). It has a higher electron transfer number and a lower hydrogen peroxide yield compared to commercial Pt/C catalysts. The green, simple, and efficient strategy designed in this study converts abundant, low-cost waste biomass into high-value multifunctional carbon materials, which are critical for achieving multifunctional applications.

Highly-dispersed NiFe alloys in-situ anchored on outer surface of Co, N co‑doped carbon nanotubes with enhanced stability for oxygen electrocatalysis

Transition metal alloys have emerged as promising catalysts for oxygen reduction/evolution reactions (ORR/OER) because of their intermetallic synergy and tunable redox properties. However, for alloy nanoparticles, it is quite challenging to suppress the self-aggregation and promote the bifunctional activity. Anchoring alloys in heteroatoms-doped carbon matrix with excellent electro-conductibility is a powerful strategy to form strongly-coupled alloy-carbon nanohybrids. Here, highly-dispersed NiFe alloys are evenly in-situ anchored on the surface of Co, N co-doped carbon nanotubes (NiFe/Co-N@CNTs) via a gravity-guided chemical vapor deposition and self-assembly strategy. Stably-structured NiFe/Co-N@CNTs possesses a tubular skeleton with diameters of 80-100 nm and a hydrophilic surface. For ORR, half-wave potential of NiFe/Co-N@CNTs (0.87 V vs RHE) is higher than that of Pt/C (0.85 V). Strong synergies between NiFe alloys and Co-N_x species facilitate the charge transfer on one-dimensional conductive structure to boost the 4e^- ORR kinetics. For OER, NiFe/Co-N@CNTs has a lower overpotential (300 mV) than RuO₂ (400 mV) at 10 mA cm^-2 due to in-situ formation of highly-active NiOOH/FeOOH species (as indicated by in-situ X-ray diffraction) at the catalytic sites on NiFe alloy. Rechargeable Zn-air battery (ZAB) with NiFe/Co-N@CNTs-based air-cathode exhibits promising open-circuit potential (1.52 V) and charge-discharge cycling stability (350 h). This alloy-carbon integrating strategy is meaningful for promoting dispersion, activity and stability of non-noble metal alloys for oxygen electrocatalysis.

Hybrid Carbon Sphere Chain-MnO2 Nanorods as Bifunctional Oxygen Electrocatalysts for Rechargeable Zinc-Air Batteries

It is now recognized that the development of self-supported and efficient bifunctional air cathodes via the direct growth of earth-abundant catalysts onto the surface of the conductive collector would be a cutting-edge strategy to reduce interfacial resistance, enhance the mechanical tenure, and reduce the final weight and cost of manufacturing of rechargeable Zn-air batteries (ZABs). This work reports an innovative self-supported precious metal-free electrode, comprising carbon sphere chains (CSCs) directly grown onto a carbon paper (CP) substrate, wherein the CSCs have a functionalized surface bearing carbon nanobud defects, oxygen functional groups, and high-density MnO₂ hierarchical nanorods (NRs), uniformly coating the surface of CSCs. Not only is the metal-free functionalized CSC catalyst functional for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) but its combination with MnO₂ NRs impressively enhances the ORR/OER activities. A homemade ZAB assembled with functionalized CSC/MnO₂ air cathode can successfully power a timer for a period of 17 days with no voltage loss, whereas two series-connected ZABs can light up 39 red light-emitting diode (LED) bulbs. The self-supported and earth-abundant-based CSC/MnO₂ materials open up an opportunity for lightweight and cost-effective ZABs and metal-air batteries in general.

Designing High-Quality Electrocatalysts Based on CoO:MnO2@C Supported on Carbon Cloth Fibers as Bifunctional Air Cathodes for Application in Rechargeable Zn-Air Battery

To achieve the requirements of rechargeable Zn-air batteries (ZABs), designing efficient, bifunctional, stable, and cost-effective electrocatalysts is vital for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which still are struggling with unsolved challenges. The present research provides a concept based on the nanoscale composites which were engineered by using MnO₂@C, CoO@C, and CoO:MnO₂@C bifunctional electrocatalysts for fabrication of uniform carbon cloth (CC)-based electrodes. The CoO:MnO₂@C electrocatalyst represented more efficient electrochemical properties through ORR and OER processes with superior positive half-wave potential (E_1/2 = 0.78 V) and better limiting current density (i = 1.10 mA cm^-2) in comparison with MnO₂@C (E_1/2 = 0.71 V, i = 0.92 mA cm^-2) and CoO@C (E_1/2 = 0.69 V, i = 0.86 mA cm^-2) electrocatalysts. For the rechargeable ZABs fabricated by using CoO:MnO₂@C-CC as an O₂-breathing cathode, the specific capacity (SC), peak power density (P), open-circuit voltage (E_OCV), and gap of charge/discharge voltage resulted in values of 520 mAh g_Zn^-1, 210.0 mW cm^-2, and 1.45 and 0.45 V, respectively, that afforded greater electrochemical characters than what was obtained for ZABs based on MnO₂@C-CC (410 mAh g_Zn^-1, 195.0 mW cm^-2, 1.38 and 0.44 V) and CoO@C-CC (440 mAh g_Zn^-1, 165.0 mW cm^-2, 1.15 and 0.54 V). At the same time, lower E_i=10 (= 1.45 V) implied a more efficient OER in alkaline electrolyte solution for CoO:MnO₂@C than MnO₂@C (E_i=10 = 1.50 V) and CoO@C (E_i=10 = 1.39 V). Based on cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), and X-ray photoelectron spectroscopy (XPS) results, it could be stated that the CoO:MnO₂@C catalytic surface could experience 30 and 32% lower charge transfer resistance (R_ct = 13.9 Ω) than MnO₂@C (R_ct = 20.1 Ω) and CoO@C (R_ct = 29.7 Ω), respectively, which empowers an enhancement in ORR/OER performance. Prominently, the design concept of proposed electrocatalysts could suggest clear horizon for the synthesis and development paradigms of bifunctional catalysts for energy storage materials and devices.

A Combination of "Push Effect" Strategy with "Triple-Phase-Boundary Engineering" on Iron Porphyrin-Based MOFs: Enhanced Selectivity and Activity for Oxygen Reduction

Herein, the "push effect" strategy combined with "triple-phase-boundary" (TPB) engineering was innovatively employed to target the single Fe-N₄ sites in an iron porphyrin-based metal-organic framework, with axially coordinated 4-octylpyridine groups on Fe-N₄ (named as PCN-224 (Fe)-1). The amphiphilic 4-octylpyridine groups donate sufficient electrons toward Fe-N₄ by the Fe-N(pyridine) coordination bond and simultaneously provide effective TBP reactive sites by the hydrophobic octyl terminals, resulting in enhanced ORR activity of the PCN-224 (Fe)-1 in hydrophobic octyl terminals, with an E_1/2 of 0.81 V and complete 4-electron selectivity. Furthermore, TPB engineering is utilized to construct the PCN-224 (Fe)-1-based Zn-air battery with a maximum power density of 98 mW cm^-2, demonstrating great practical application potential for molecule-based ORR catalysts. Meanwhile, the "push effect" mechanism on ORR is revealed by electron paramagnetic resonance, in situ UV-vis spectroelectrochemical analysis, and density functional theory.

Recent Progress on Fe-Based Single/Dual-Atom Catalysts for Zn-Air Batteries

As one of the most competitive candidates for large-scale energy storage, zinc-air batteries (ZABs) have attracted great attention due to their high theoretical specific energy density, low toxicity, high abundance, and high safety. It is highly desirable but still remains a huge challenge, however, to achieve cheap and efficient electrocatalysts to promote their commercialization. Recently, Fe-based single-atom and dual-atom catalysts (SACs and DACs, respectively) have emerged as powerful candidates for ZABs derived from their maximum utilization of atoms, excellent catalytic performance, and low price. In this review, some fundamental concepts in the field of ZABs are presented and the recent progress on the reported Fe-based SACs and DACs is summarized, mainly focusing on the relationship between structure and performance at the atomic level, with the aim of providing helpful guidelines for future rational designs of efficient electrocatalysts with atomically dispersed active sites. Finally, the great advantages and future challenges in this field of ZABs are also discussed.

Secondary-Heteroatom-Doping-Derived Synthesis of N, S Co-Doped Graphene Nanoribbons for Enhanced Oxygen Reduction Activity

The rareness and weak durability of Pt-based electrocatalysts for oxygen reduction reactions (ORRs) have hindered the large-scale application of fuel cells. Here, we developed an efficient metal-free catalyst consisting of N, S co-doped graphene nanoribbons (N, S-GNR-2s) for ORRs. GNRs were firstly synthesized via the chemical unzipping of carbon nanotubes, and then N, S co-doping was conducted using urea as the primary and sulfourea as the secondary heteroatom sources. The successful incorporation of nitrogen and sulfur was confirmed by elemental mapping analysis as well as X-ray photoelectron spectroscopy. Electrochemical testing revealed that N, S-GNR-2s exhibited an E_onset of 0.89 V, E_1/2 of 0.79 V and an average electron transfer number of 3.72, as well as good stability and methanol tolerance. As a result, N, S-GNR-2s displayed better ORR property than either N-GNRs or N, S-GNRs, the control samples prepared with only a primary heteroatom source, strongly clarifying the significance of secondary-heteroatom-doping on enhancing the catalytic activity of carbon-based nanomaterials.

Plasma Surface Engineering of NiCo2S4@rGO Electrocatalysts Enables High-Performance Li-O2 Batteries

The sluggish redox reaction kinetics for aprotic Li-O₂ batteries (LOBs) caused by the insulating discharge product of Li₂O₂ could result in the poor round-trip efficiency, low rate capability, and cyclic stability. To address these challenges, we herein fabricated NiCo₂S₄ supported on reduced graphene oxide (NiCo₂S₄@rGO), the surface of which is further modified via a unique low-pressure capacitive-coupled nitrogen plasma (CCPN-NiCo₂S₄@rGO). The high ionization environment of the plasma could etch the surface of NiCo₂S₄@rGO, introducing effective nitrogen doping. The as-prepared CCPN-NiCo₂S₄@rGO has been employed as an efficient catalyst for advanced LOBs. The electrochemical analysis, combined with theoretical calculations, reveals that the N-doping can effectively improve the thermodynamics and kinetics for LiO₂ adsorption, giving rise to a well-knit Li₂O₂ formation on CCPN-NiCo₂S₄@rGO. The LOBs based on the CCPN-NiCo₂S₄@rGO oxygen electrode deliver a low overpotential of 0.75 V, a high discharge capacity of 10,490 mA h g^-1, and an improved cyclic stability (more than 110 cycles). This contribution may pave a promising avenue for facile surface engineering of the electrocatalyst in LOBs and other energy storage systems.

Facile synthesis of multiphase cobalt-iron spinel with enriched oxygen vacancies as a bifunctional oxygen electrocatalyst

The multiphase cobalt-iron spinel was firstly synthesized via a facile cold plasma method and applied as a bifunctional electrocatalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Compared with the single-phase obtained by the traditional calcination method, the CoFe₂O₄ and Co₃O₄ phase were obtained by the plasma method. The multivalence states of cobalt and iron facilitated electron transport in electrochemical reactions. The plasma sample had a small particle size (5 nm) due to the low operation temperature. Notably, electron impact produced more oxygen vacancies and a larger surface area on Co_xFe_yO₄, which increased the active sites and electronic conductivity. Electrochemical investigations indicated that the multiphase spinel obtained with a quasi-four-electron transfer process showed an onset potential of 0.76 V versus the RHE for the oxygen reduction reaction. In the oxygen evolution reaction, the potential of current density at 10 mA cm^-2 was 1.53 V versus RHE. As for the overall electrocatalytic activity, the multiphase spinel had a ΔE (the difference between E₁₀(OER) and E_1/2(ORR)) of 0.89 V, exhibiting greater bifunctional activity than the other prepared catalysts.

Heteroatom-Doped Carbon-Encapsulated FeP Nanostructure: A Multifunctional Electrocatalyst for Zinc-Air Battery and Water Electrolyzer

The rational design and synthesis of efficient multifunctional electrocatalysts for renewable energy technologies is of significant interest. Herein, we demonstrate a novel approach for the synthesis of a nitrogen and phosphorus dual-doped mesoporous carbon-encapsulated iron phosphide (FeP@NPC) nanostructure and its multifunctional electrocatalytic activity toward an oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction for zinc-air battery (ZAB) and alkaline water-splitting applications. FeP@NPC is obtained by the carbothermal reduction of the precursor complex [Fe(bpy)₃](PF₆)₂ in the presence of melamine without any traditional phosphidating agent. The PF₆^- counteranion is used for the phosphidation of Fe. FeP@NPC obtained at 900 °C (FeP@NPC-900) exhibits excellent bifunctional oxygen electrocatalytic performance with a very low potential gap (ΔE = E_1/2^ORR - E_j10^OER) of 670 mV. The ZAB device delivers a peak power density of 190.15 mW cm^-2 (iR-corrected), specific capacity of 785 mA h g_Zn^-1, and energy density of 706.5 Wh kg_Zn^-1 at 50 mA cm^-2. The ZAB exhibits excellent charge-discharge cycling stability for over 35 h with negligible voltaic efficiency loss (0.9%). Three CR2032 coin-cell-based ZABs made of an FeP@NPC-900 air cathode connected in series power 81 LEDs for 15 min. FeP@NPC-900 also has promising electrocatalytic activity toward water splitting in acidic as well as in alkaline pH. The benchmark current density of 10 mA cm^-2 is achieved with a two-electrode alkaline water electrolyzer at a cell voltage of 1.65 V. ZAB-powered water electrolyzer is made by integrating two rechargeable ZABs connected in series with the two-electrode water electrolyzer. The ZAB powers the electrolyzer for 24 h without a significant loss in the open-circuit voltage. The catalyst retains its initial structural integrity even after continuous water electrolysis for 24 h.

Nitrogen-Doped Carbon Polyhedrons Confined Fe-P Nanocrystals as High-Efficiency Bifunctional Catalysts for Aqueous Zn-CO2 Batteries

Emerging Fe bonded with heteroatom P in carbon matrix (FePC) holds great promise for electrochemical catalysis, but the design of highly active and cost-efficient FePC structure for the electrocatalytic CO₂ reduction reaction (CO₂ RR) and aqueous ZnCO₂ batteries (ZCBs) is still challenging. Herein, polyhedron-shaped bifunctional electrocatalysts, FeP nanocrystals anchored in N-doped carbon polyhedrons (Fe-P@NCPs), toward a reversible aqueous ZnCO₂ battery, are reported. The Fe-P@NCPs are synthesized through a facile strategy by using self-templated zeolitic imidazolate frameworks (ZIFs), followed by an in situ high-temperature calcination. The resultant catalysts exhibit aqueous CO₂ RR activity with a CO Faradaic efficiency up to 95% at -0.55 V versus reversible hydrogen electrode (RHE), comparable to the previously best-reported values of FeNC structure. The as-constructed ZCBs with designed Fe-P@NCPs cathode, show the peak power density of 0.85 mW cm^-2 and energy density of 231.8 Wh kg^-1 with a cycling durability over 500 cycles, and outstanding stability in terms of discharge voltage for 7 days. The high selectivity and efficiency of the battery are attributed to the presence of highly catalytic FeP nanocrystals in N-doped carbon matrix, which can effectively increase the number of catalytically active sites and interfacial charge-transfer conductivity, thereby improving the CO₂ RR activity.

Systematic Study of Effective Hydrothermal Synthesis to Fabricate Nb-Incorporated TiO2 for Oxygen Reduction Reaction

Fuel cells are expected to serve as next-generation energy conversion devices owing to their high energy density, high power, and long life performance. The oxygen reduction reaction (ORR) is important for determining the performance of fuel cells; therefore, using catalysts to promote the ORR is essential for realizing the practical applications of fuel cells. Herein, we propose Nb-incorporated TiO₂ as a suitable alternative to conventional Pt-based catalysts, because Nb doping has been reported to improve the conductivity and electron transfer number of TiO₂. In addition, Nb-incorporated TiO₂ can induce the electrocatalytic activity for the ORR. In this paper, we report the synthesis method for Nb-incorporated TiO₂ through a hydrothermal process with and without additional load pressures. The electrocatalytic activity of the synthesized samples for the ORR was also demonstrated. In this process, the samples obtained under various load pressures exceeding the saturated vapor pressure featured a high content of Nb and crystalline TiNb₂O₇, resulting in an ellipsoidal morphology. X-ray diffraction results also revealed that, on increasing the Nb doping amounts, the diffraction peak of the anatase TiO₂ shifted to a lower angle and the full width at half maximum decreased. This implies that the Ti atom is exchanged with the Nb atom during this process, resulting in a decrease in TiO₂ crystallinity. At a doping level of 10%, Nb-incorporated TiO₂ exhibited the best electrocatalytic activity in terms of the oxygen reduction current (i_ORR) and onset potential for the ORR (E_ORR); this suggests that 10% Nb-doped samples have the potential for enhancing electrocatalytic activity.

Application of Advanced Vibrational Spectroscopy in Revealing Critical Chemical Processes and Phenomena of Electrochemical Energy Storage and Conversion

The future of the energy industry and green transportation critically relies on exploration of high-performance, reliable, low-cost, and environmentally friendly energy storage and conversion materials. Understanding the chemical processes and phenomena involved in electrochemical energy storage and conversion is the premise of a revolutionary materials discovery. In this article, we review the recent advancements of application of state-of-the-art vibrational spectroscopic techniques in unraveling the nature of electrochemical energy, including bulk energy storage, dynamics of liquid electrolytes, interfacial processes, etc. Technique-wise, the review covers a wide range of spectroscopic methods, including classic vibrational spectroscopy (direct infrared absorption and Raman scattering), external field enhanced spectroscopy (surface enhanced Raman and IR, tip enhanced Raman, and near-field IR), and two-photon techniques (2D infrared absorption, stimulated Raman, and vibrational sum frequency generation). Finally, we provide perspectives on future directions in refining vibrational spectroscopy to contribute to the research frontier of electrochemical energy storage and conversion.

Design and Facile Synthesis of Highly Efficient and Durable Bifunctional Oxygen Electrocatalyst Fe-Nx/C Nanocages for Rechargeable Zinc-Air Batteries

Looking for a high-efficiency, durabile, and low-cost dual-functional oxygen electrocatalyst as the air electrode catalyst in rechargeable zinc-air batteries (ZABs) is urgently desirable but faces many challenges. Herein, we propose the preparation strategy of effectively using a bifunctional electrocatalyst (Fe-N_x/C) based on the zeolite imidazole organic framework-8 (ZIF-8) as the template agent, with surface modification coated by ferrocene (Fc) molecules followed by pyrolysis at high temperature under inert atmosphere. Benefiting from the surface modification of ZIF-8 with Fc molecules, more abundant multiple catalytic Fe/Fe-N_x/FeC_x sites with high intrinsic activity are derived, the resultant Fe-N_x/C exhibits excellent potential gap (ΔE = 0.63 V) and durability, which is obviously superior to the Pt/C + IrO₂ benchmark (ΔE = 0.77 V) and other state-of-the-art electrocatalysts. Furthermore, the assembled rechargeable ZABs employing the Fe-N_x/C as an air-electrode show a reduced charging-discharging potential difference of 0.603 V, high power density of 214.8 mW cm^-2, and long-term cycling stability of more than 290 h at 2.0 mA cm^-2. Therefore, this work presents a feasible strategy to prepare a high-efficiency and durability ORR/OER bifunctional electrocatalyst toward high performance ZABs and next-generation energy storage devices.