Bismuth Nanoparticles Confined in Carbonaceous Nanospheres as Anodes for High-Performance Potassium-Ion Batteries

Recent advances in rational design for high-performance potassium-ion batteries

The growing global energy demand necessitates the development of renewable energy solutions to mitigate greenhouse gas emissions and air pollution. To efficiently utilize renewable yet intermittent energy sources such as solar and wind power, there is a critical need for large-scale energy storage systems (EES) with high electrochemical performance. While lithium-ion batteries (LIBs) have been successfully used for EES, the surging demand and price, coupled with limited supply of crucial metals like lithium and cobalt, raised concerns about future sustainability. In this context, potassium-ion batteries (PIBs) have emerged as promising alternatives to commercial LIBs. Leveraging the low cost of potassium resources, abundant natural reserves, and the similar chemical properties of lithium and potassium, PIBs exhibit excellent potassium ion transport kinetics in electrolytes. This review starts from the fundamental principles and structural regulation of PIBs, offering a comprehensive overview of their current research status. It covers cathode materials, anode materials, electrolytes, binders, and separators, combining insights from full battery performance, degradation mechanisms, in situ/ex situ characterization, and theoretical calculations. We anticipate that this review will inspire greater interest in the development of high-efficiency PIBs and pave the way for their future commercial applications.

Construction of Bi/Bi2O3 particles embedded in carbon sheets for boosting the storage capacity of potassium-ion batteries

Bismuth-based materials have attracted interest in potassium-ion batteries (PIBs). However, the large volume expansion prevents further use of bismuth-based materials for potassium storage. This work employs a two-step synthesis method to innovatively synthesize of Bi/Bi2O3 nanoparticles assembled on N-doped porous carbon sheets (Bi/Bi2O3@CN). The layered structures with uniformly shaped and N-doped porous carbon skeleton buffer the expansion of Bi and the Bi/Bi2O3 particles increase the capacity of potassium storage. In brief, the Bi/Bi2O3@CN served as anode in half-cell of PIBs have a good rate capacity of more than 234.7 mAh/g at 20 A/g. The specific capacity retention was 73 % compared with 322.16 mAh/g at 1 A/g, demonstrating good holding capacity for diverse current densities. The cycle also displays 163 mAh/g after 1500 cycles at 2 A/g in the KPF6 metal salt solution, showing its potential as one of the anode materials in PIBs.

Operando Studies of Bismuth Nanoparticles Embedded in N, O-Doped Porous Carbon for High-Performance Potassium-Ion Hybrid Capacitor

A highly viable alternative to lithium-ion batteries for stationary electrochemical energy-storage systems is the potassium dual-ion hybrid capacitor (PIHC), especially toward fast-charging capability. However, the sluggish reaction kinetics of negative electrode materials seriously impedes their practical implementation. In this paper, a new negative electrode Bi@RPC (Nano-bismuth confined in nitrogen- and oxygen-doped carbon with rationally designed pores, evidenced by advanced characterization) is developed, leading to a remarkable electrochemical performance. PIHCs building with the active carbon YP50F positive electrode result in a high operation voltage (0.1-4 V), and remarkably well-retained energy density at a high-power density (11107 W kg-1 at 98 Wh kg-1 ). After 5000 cycles the proposed PHICs still show a superior capacity retention of 92.6%. Moreover, a reversible mechanism of "absorption-alloying" of the Bi@RPC nanocomposite is revealed by operando synchrotron X-ray diffraction and Raman spectroscopy. With the synergistic potassium ions storage mechanism arising from the presence of well-structured pores and nano-sized bismuth, the Bi@RPC electrode exhibits an astonishingly rapid kinetics and high energy density. The results demonstrate that PIHCs with Bi@RPC-based negative electrode is the promising option for simultaneously high-capacity and fast-charging energy storage devices.

Novel Ultra-Stable 2D SbBi Alloy Structure with Precise Regulation Ratio Enables Long-Stable Potassium/Lithium-Ion Storage

The inferior cycling stabilities or low capacities of 2D Sb or Bi limit their applications in high-capacity and long-stability potassium/lithium-ion batteries (PIBs/LIBs). Therefore, integrating the synergy of high-capacity Sb and high-stability Bi to fabricate 2D binary alloys is an intriguing and challenging endeavor. Herein, a series of novel 2D binary SbBi alloys with different atomic ratios are fabricated using a simple one-step co-replacement method. Among these fabricated alloys, the 2D-Sb0.6 Bi0.4 anode exhibits high-capacity and ultra-stable potassium and lithium storage performance. Particularly, the 2D-Sb0.6 Bi0.4 anode has a high-stability capacity of 381.1 mAh g-1 after 500 cycles at 0.2 A g-1 (≈87.8% retention) and an ultra-long-cycling stability of 1000 cycles (0.037% decay per cycle) at 1.0 A g-1 in PIBs. Besides, the superior lithium and potassium storage mechanism is revealed by kinetic analysis, in-situ/ex-situ characterization techniques, and theoretical calculations. This mainly originates from the ultra-stable structure and synergistic interaction within the 2D-binary alloy, which significantly alleviates the volume expansion, enhances K+ adsorption energy, and decreases the K+ diffusion energy barrier compared to individual 2D-Bi or 2D-Sb. This study verifies a new scalable design strategy for creating 2D binary (even ternary) alloys, offering valuable insights into their fundamental mechanisms in rechargeable batteries.

Bi-MOF-Derived Carbon Wrapped Bi Nanoparticles Assembly on Flexible Graphene Paper Electrode for Electrochemical Sensing of Multiple Heavy Metal Ions

The development of nanohybrid with high electrocatalytic activity is of great significance for electrochemical sensing applications. In this work, we develop a novel and facile method to prepare a high-performance flexible nanohybrid paper electrode, based on nitrogen-doped carbon (NC) wrapped Bi nanoparticles (Bi-NPs) assembly derived from Bi-MOF, which are decorated on a flexible and freestanding graphene paper (GP) electrode. The as-obtained Bi-NPs encapsulated by an NC layer are uniform, and the active sites are increased by introducing a nitrogen source while preparing Bi-MOF. Owing to the synergistic effect between the high conductivity of GP electrode and the highly efficient electrocatalytic activity of Bi-NPs, the NC wrapped Bi-NPs (Bi-NPs@NC) modified GP (Bi-NPs@NC/GP) electrode possesses high electrochemically active area, rapid electron-transfer capability, and good electrochemical stability. To demonstrate its outstanding functionality, the Bi-NPs@NC/GP electrode has been integrated into a handheld electrochemical sensor for detecting heavy metal ions. The result shows that Zn²⁺, Cd²⁺, and Pb²⁺ can be detected with extremely low detection limits, wide linear range, high sensitivity, as well as good selectivity. Furthermore, it demonstrates outstanding electrochemical sensing performance in the simultaneous detection of Zn²⁺, Cd²⁺, and Pb²⁺. Finally, the proposed electrochemical sensor has achieved excellent repeatability, reproducibility, stability, and reliability in measuring real water samples, which will have great potential in advanced applications in environmental systems.

Strong interface coupling boosting hierarchical bismuth embedded carbon hybrid for high-performance capacitive deionization

Capacitive deionization (CDI) is regarded as a promising desalination technology owing to its low cost and environmental friendliness. However, the lack of high-performance electrode materials remains a challenge in CDI. Herein, the hierarchical bismuth-embedded carbon (Bi@C) hybrid with strong interface coupling was prepared through facile solvothermal and annealing strategy. The hierarchical structure with strong interface coupling between the bismuth and carbon matrix afforded abundant active sites for chloridion (Cl^-) capture, improved electrons/ions transfer and the stability of the Bi@C hybrid. As a result of these advantages, the Bi@C hybrid showed a high salt adsorption capacity (75.3 mg/g under 1.2 V), salt adsorption rate and good stability, making it a promising electrode material for CDI. Furthermore, the desalination mechanism of the Bi@C hybrid was elucidated through various characterizations. Therefore, this work provides valuable insights for the design of high-performance bismuth-based electrode materials for CDI.

Electrospun carbon-based nanomaterials for next-generation potassium batteries

Rechargeable potassium (K) batteries that are of low cost, with high energy densities and long cycle lives have attracted tremendous interest in affordable and large-scale energy storage. However, the large size of the K-ion leads to sluggish reaction kinetics and causes a large volume variation during the ion insertion/extraction processes, thus hindering the utilization of active electrode materials, triggering a serious structural collapse, and deteriorating the cycling performance. Therefore, the exploration of suitable materials/hosts that can reversibly and sustainably accommodate K-ions and host K metals are urgently needed. Electrospun carbon-based materials have been extensively studied as electrode/host materials for rechargeable K batteries owing to their designable structures, tunable composition, hierarchical pores, high conductivity, large surface areas, and good flexibility. Here, we present the recent developments in electrospun CNF-based nanomaterials for various K batteries (e.g., K-ion batteries, K metal batteries, K-chalcogen batteries), including their fabrication methods, structural modulation, and electrochemical performance. This Feature Article is expected to offer guidelines for the rational design of novel electrospun electrodes for the next-generation K batteries.

2D Bismuth@N-Doped Carbon Sheets for Ultrahigh Rate and Stable Potassium Storage

Metallic Bi, as an alloying-type anode material, has demonstrated tremendous potential for practical application of potassium-ion batteries. However, the giant volume expansion, severe structure pulverization, and sluggish dynamics of Bi-based materials result in unsatisfied rate performance and unstable cycling stability. Here, 2D bismuth@N-doped carbon sheets with BiOC bond and internal void space (2D Bi@NOC) are successfully fabricated via a self-template strategy to address these issues, which own ultrafast electrochemical kinetics and impressive long-term cycling stability for delivering an admirable capacity of 341.7 mAh g^-1 after 1000 cycles at 10 A g^-1 and impressive rate capability of 220.6 mAh g^-1 at 50 A g^-1 . Particularly, the in situ transmission electron microscopy observations visualize the real-time alloying/dealloying process and reveal that plastic carbon shell and void space can availably relieve dramatic volume stress and powerfully maintain structural integrity. Density functional theory calculation and ultraviolet photoelectron spectroscopy test certify that the robust BiOC bond is thermodynamically and kinetically beneficial for adsorption/diffusion of K⁺ . This work will light on designing advanced high-performance energy materials and provide important evidence for understanding the energy storage mechanism of alloy-based materials.

Boosting Interfacial Ion Transfer in Potassium-Ion Batteries via Synergy Between Nanostructured Bi@NC Bulk Anode and Electrolyte

Using high-capacity alloy-type anodes can greatly advance potassium-ion batteries (PIBs). However, the primary limits are unstable solid electrolyte interphase (SEI) and tough interfacial ion transfer associated with large-size K⁺ during electrochemical (de)alloy reactions. Here, we achieve excellent energy storage performance of PIBs via the synergy between a nanostructured Bi@N-doped carbon (Bi@NC) bulk anode and a KPF₆-dimethoxyethane (DME) electrolyte. The Bi@NC material with a high tap density of 3.81 g cm^-3 is prepared by simply pyrolyzing a commercial Bi salt yet affords a favorable nano/microstructure consisting of Bi nanograins confined in 3D ultrathin N-doped carbon shells, facilitating electron/ion transport and structural integrity. Detailed impedance spectroscopy investigation unveils that K⁺ transport through SEI at the Bi@NC anode, rather than the desolvation of K⁺, dominates the interfacial K⁺ transfer. More importantly, spectroscopic and microscopic characterizations provide clear evidence that the interplay between Bi@NC anode and optimized KPF₆-DME electrolyte can produce a unique SEI layer containing Bi³⁺-solvent complex that enables the activation energy of interfacial K⁺ transfer as low as 25.9 kJ mol^-1, thereby ultrafast charge transfer at Bi@NC. Consequently, the Bi@NC anode in half cells achieves exceptional rate capability (206 mAh g^-1 or 784 mAh cm^-3 at 120C) accompanied by high specific capacity (331 mAh g^-1 or 1261 mAh cm^-3) and long cycle life (running 1400 cycles at 15C with a tiny capacity fading rate of 0.013% per cycle). Moreover, the Bi@NC anode and KPF₆-DME electrolyte are also compatible with a potassium Prussian blue cathode and assembled full PIBs achieve stable cyclability (87.3% capacity retention after 100 cycles at 2.5C) and excellent rate performance (65.1% capacity retention upon increasing rates from 1 to 20C).

Synthesis of CoSe2 reinforced nitrogen-doped carbon composites as advanced anodes for potassium-ion batteries

Owing to the synergistic effect of CoSe2 and N-doped carbon matrix, a composite of CoSe2 nanoparticles dispersed in polydopamine-derived N-doped carbon matrix exhibits high specific capacity and excellent cyclability as potassium-ion battery anode.

An advanced BiPO4/super P anode material for high-performance potassium-ion batteries

Dispersed BiPO₄ nanoparticles loaded on the surface of a super P conducting network (BiPO₄/SP) were fabricated and investigated as a novel anode for PIBs. The BiPO₄/SP electrode demonstrates high rate capability (97.1 mA h g^-1 at 500 mA g^-1) and good long-term cycling performance (116 mA h g^-1 at 200 mA g^-1 over 100 cycles).