Structural Engineering of Hollow Microflower-like CuS@C Hybrids as Versatile Electrochemical Sensing Platform for Highly Sensitive Hydrogen Peroxide and Hydrazine Detection

Nanobody and CuS Nanoflower-Au-Based Lateral Flow Immunoassay Strip to Enhance the Detection of Aflatoxin B1

In the realm of analysis, the lateral flow immunoassay (LFIA) is frequently utilized due to its capability to be fast and immediate. However, the biggest challenge of the LFIA is its low detection sensitivity and tolerance to matrix interference, making it impossible to enable accurate, qualitative analyses. In this study, we developed a new LFIA with higher affinity and sensitivity, based on a nanobody (G8-DIG) and CuS nanoflowers-Au (CuS NFs-Au), for the detection of aflatoxin B1 (AFB1) in maize. We synthesized the immunoprobe G8-DIG@CuS NFs-Au, stimulated the in situ development of Au nanoparticles (Au NPs) on Cu NFs by electrical displacement, and obtained Cu NFs-Au for fixing the G8-DIG. G8-DIG@CuS NFs-Au probe-based LFIAs may, in ideal circumstances, use a strip chromatography reader to accomplish sensitive quantitative detection and qualitative visualization. AFB1 has a detection range of 2.82-89.56 µg/L and a detection limit of 0.87 µg/L. When compared with an LFIA based on CuS NFs, this sensitivity is increased by 2.76 times. The practical application of this method in corn flour demonstrated a recovery rate of 81.7% to 117%. Therefore, CuS NFs-Au show great potential for detecting analytes.

One-Pot Synthesis of Nanoflower-Like Zn2SnS4 as Nanozymes for Highly Sensitive Electrochemical Detection of H2O2 Released by Living Cells

The sensitive and reliable nanozyme-based sensor enables the detection of low concentrations of H2O2 in biological microenvironments, it has potential applications as an in-situ monitoring platform for cellular H2O2 release. The uniformly dispersed bimetallic sulfide (Zn2SnS4) nanoflowers were synthesized via a one-pot hydrothermal method and the two kinds of metal ions can serve as morphology and structure directing agents for each other in the synthetic process. The nanoparticles were utilized as nanozyme materials to fabricate a novel electrochemical sensor, and it exhibits a distinct electrochemical response towards H2O2 with excellent stability and detection capability (with a minimum detection limit of 1.79 nM (S/N=3)), the excellent characteristics facilitate the precise detection of low concentrations of H2O2 in biological microenvironments. Use the macrophages differentiated from leukemia THP-1 cells as a representative sensing model, the sensor was successfully utilized for real-time monitoring of the release of H2O2 induced by living cells, which has significant potential applications in clinical diagnosis and cancer treatment.

Electrodeposition of CoFeS nanoflakes on Cu2O nanospheres as an ultrasensitive sensing platform for measurement of the hydrazine and hydrogen peroxide in seawater sample

Nanoarchitectured design of the metal sulfides with highly available surface and abundant electroactive centers and using them as electrocatalyst for fabricate the electrochemical sensors for the detection of hydrazine (N2H4) and hydrogen peroxide (H2O2) is challenging and desirable. Herein, Cu2O nanospheres powder is firstly prepared using chemical reduction of copper chloride and then drop-casted on the glassy carbon electrode (GCE) surface. In the next step, CoFeS nanoflakes are electrodeposited on Cu2O nanospheres by cyclic voltammetry method to form CoFeS/Cu2O nanocomposite as a detection platform for measuring N2H4 and H2O2. Accordingly, Cu2O nanospheres are not only used as substrate, but also guided the CoFeS nanoflakes to adhere to the electrode surface without need to any binder or conductive additive, which enhances the electrical conductivity of the sensing active materials. As the hydrazine sensor, the CoFeS/Cu2O/GCE displayed wide linear ranges (0.0001-0.021 mM and 0.021-1.771 mM), low detection limit (0.12 μM), very high sensitivities (103.33 and 21.23 mA mM-1 cm-2), and excellent selectivity. The as-made nanocomposite also exhibited low detection limit of 1.26 μM for H2O2 sensing with very high sensitivities (12.31 and 3.96 mA mM-1 cm-2) for linear ranges of 0.001-0.03 mM and 0.03-2.03 mM, respectively, and negligible response against interfering substances. The superior analytical performance of the CoFeS/Cu2O for N2H4 electro-oxidation and H2O2 electro-reduction can be attributed to structure stability, high electroactive surface area, and good availability to analyte species and electrolyte diffusion. Moreover, to examine the potency of the prepared nanocomposite in real applications, the seawater sample was analyzed and results display that the CoFeS/Cu2O/GCE can be utilized as a reliable and applicable platform for measuring N2H4 and H2O2.

Rod-Shaped Spinel Co3O4 and Carbon Nitride Heterostructure-Modified Fluorine-Doped Tin Oxide Electrode as an Electrochemical Transducer for Efficient Sensing of Hydrazine

Engineering low-cost and efficient materials for sensing hydrazine (HA) is critical given the adverse effects of high concentrations on humans. We report an efficient electrode made up of rod-shaped Co3O4/g-C3N4 (Co3O4/graphitic carbon nitride (GCN))-coated fluorine-doped tin oxide as a desirable electrode for the detection of HA. GCN is synthesized by the thermal decomposition of melamine, Co3O4, and the heterostructure is grown by a hydrothermal process. The as-prepared materials were characterized by using spectroscopic and microscopic techniques. The voltammetric studies showed that HA can be oxidized at a lower onset potential of 0.24 V vs reference Ag/AgCl, and the composite yielded a significantly enhanced oxidation peak current than the pure components because of the high electrocatalytic activity and the synergy between Co3O4 and GCN. By employing chronoamperometry, the proposed sensor can detect HA in a wide range with a high sensitivity of 819.52 μA mM-1 cm-2 and a detection limit of 3.14 μM. The high conductivity of Co3O4, enhanced electroactive surface area, the rich redox couples of Co2+/Co3+, and the additional catalytic sites from GCN are responsible for the high performance of the heterostructure.

Electrochemical activation of oxygen vacancy-rich TiO2@MXene as high-performance electrochemical sensing platform for detecting imidacloprid in fruits and vegetables

Heterostructured TiO₂@MXene rich in oxygen vacancies defects (VO-TiO₂@MXene) has been developed to construct an electrochemical sensing platform for imidacloprid (IMI) determination. For the material design, TiO₂ nanoparticles were firstly in situ grown on MXene and used as a scaffolding to prevent the stack of MXene nanosheets. The obtained TiO₂@MXene heterostructure displays excellent layered structure and large specific surface area. After that, electrochemical activation is utilized to treat TiO₂@MXene, which greatly increases the concentration of surface oxygen vacancies (VOs), thereby remarkably enhancing the conductivity and adsorption capacity of the composite. Accordingly, the prepared VO-TiO₂@MXene displays excellent electrocatalytic activity toward the reduction of IMI. Under optimum conditions, cyclic voltammetry and linear sweep voltammetry techniques were utilized to investigate the electrochemical behavior of IMI at the VO-TiO₂@MXene/GCE. The proposed sensor based on VO-TiO₂@MXene presents an obvious reduction peak at -1.05 V(vs. Hg|Hg₂Cl₂) with two linear ranges from 0.07 - 10.0 μM and 10.0 - 70.0 μM with a detection limit of 23.3 nM (S/N= 3). Furthermore, the sensor provides a reliable result for detecting IMI in fruit and vegetable samples with a recovery of 97.9-103% and RSD≤ 4.3%. A sensitive electrochemical sensing platform was reported for imidacloprid (IMI) determination based on heterostructured TiO₂@MXene rich in oxygen vacancy defects.

Coaxial electrospinning synthesis of size-tunable CuO/NiO hollow heterostructured nanofibers: Towards detection of glucose level in human serum

Nanofibers (NFs) have found wide applications by virtue of their particular morphology and high specific surface area. In this study, size-tunable hollow CuO/NiO NFs were synthesized by coaxial electrospinning and subsequent calcination. The synthesized hollow CuO/NiO NFs owned large specific surface area for catalytic active sites. In addition, the formation of heterostructure interface between CuO and NiO was beneficial to improve the electrocatalytic performance. As non-enzymatic electrode material, the synthesized CuO/NiO NFs exhibited superior electrocatalytic capability for glucose oxidation. When the molar ratio of CuO to NiO is 0.4, the composite NFs achieved the optimal electrocatalytic ability for glucose oxidation, performing high sensitivity of 1324.17 μA mM^-1 cm^-2 and wide liner range from 1 to 10,000 μM. The constructed electrode has been utilized to detect glucose concentration in real serum with excellent recovery, indicating that CuO/NiO hollow heterostructured NFs are promising materials for biomedical applications.

Self-assembled ZnO microspheres coated with carbon dot-doped CoNi LDH wrinkled films as electrochemical sensors for highly sensitive detection of hydrazine

In this study, a 3D surface-folded composite was prepared in situ as a hydrazine sensor by loading a hybrid film of CoNi-layered double hydroxides (LDHs) with nitrogen-doped carbon dots on self-assembled ZnO microspheres. The nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), and the electrochemical behavior of the sensors was investigated by cyclic voltammetry (CV), amperometry and electrochemical impedance spectroscopy (EIS). The results showed that ZnO microspheres with nitrogen-doped carbon dots strongly coupled with LDHs can significantly reduce the charge transfer resistance, accelerate the oxidation kinetics of hydrazine, and effectively increase the electrochemically active surface area (ECSA). The sensor achieved ultra-sensitive (13 040 μA mM-1 cm-2 (S/N = 3)) detection of hydrazine in the concentration range of 0.7 μM to 4 mM, exhibited excellent selectivity, reproducibility and high stability, and was successfully applied to the determination of hydrazine in actual environmental water samples and landfill leachate samples.

Enhanced Peroxidase-like Activity of CuS Hollow Nanocages by Plasmon-Induced Hot Carriers and Photothermal Effect for the Dual-Mode Detection of Tannic Acid

High catalytic activity is one of the necessary parameters for nanozymes to substitute for natural enzymes. It remains a great challenge to improve the specific enzyme-like activity of nanozymes as much as possible using the characteristics of nanomaterials for avoiding complexity and introducing additional uncertainties. Here, by combining the peroxidase (POD)-like activity and plasmon properties of CuS hollow nanocages (CuS HNCs), we demonstrate the feasibility of modulating the catalytic activity of nanozymes by the localized surface plasmon resonance (LSPR) effect. Rough surfaces and hollow-cage structures endow CuS HNCs with abundant hot spots to produce strong LSPR in the near-infrared (NIR) region, which makes the CuS HNCs simultaneously generate plentiful high-energy hot carriers and thermal effect to mediate H₂O₂ cleavage to yield the reactive oxide species (ROS) as well as speed up the reaction, leading to a dramatically enhanced POD-like activity. Based on the light-enhanced catalytic activity and high photothermal efficiency of the reaction system, a dual-mode strategy for detecting tannic acid (TA) is developed and successfully applied to determine the content of TA in different kinds of teas. This work not only provides a novel path for tuning the specific enzyme-like activity of nanomaterials but also shows a perspective for dual-mode sensing based on a photoinduced plasmon-enhanced effect.

Design of a ratiometric near-infrared fluorescent probe with double excitation for hydrazine detection in vitro and in vivo

Hydrazine has a wide range of industrial applications, but it is also a toxic and explosive chemical substance, which brings potential risks to human health and environmental safety. Therefore, rapid and sensitive monitoring of hydrazine is of great importance in environmental sciences and biological systems. In this work, a new near-infrared (NIR) ratiometric fluorescent probe (Ac-HY) was designed to detect hydrazine under double excitation and emission mode. Ac-HY exhibited large stokes shift (130 nm), high selectivity and sensitivity to hydrazine detection. The applications of Ac-HY probe for detecting hydrazine in vapor and imaging hydrazine in lipid droplets and zebrafish. Therefore, Ac-HY can be used to monitor the distribution of exogenous hydrazine in vitro and in vivo.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.