In Situ Measurements of the Mechanical Properties of Electrochemically Deposited Li2CO3 and Li2O Nanorods

Rationally Designed Li-Ag Alloy with In-Situ-Formed Solid Electrolyte Interphase for All-Solid-State Lithium Batteries

All-solid-state lithium batteries (ASSLBs) with sulfide-based solid electrolytes have attracted significant attention as promising energy storage devices, owing to their high energy density and enhanced safety. However, the combination of a lithium metal anode and a sulfide solid electrolyte results in performance degradation, owing to lithium dendrite growth and the side reactions of lithium metal with the solid electrolyte. To address these issues, a Ag-based Li alloy with a favorable solid electrolyte interphase (SEI) was prepared using electrodeposition and applied to the ASSLB as an anode. The electrochemically formed SEI layer on the Li-Ag alloy primarily comprised LiF and Li2O with high mechanical strength and Li3N with high ionic conductivity, which suppressed the formation of lithium dendrites and short-circuiting of the cell. The symmetric cell with the Li-Ag alloy achieved a critical current density of 1.6 mA cm-2 and maintained stable cycling for over 2000 h at a current density of 0.6 mA cm-2. Consequently, the all-solid-state lithium cell assembled with the Li-Ag alloy anode with SEI, Li6PS5Cl solid electrolyte, and LiNi0.78Co0.10Mn0.12O2 cathode delivered a high discharge capacity of 185 mAh g-1 and exhibited good cycling performance in terms of cycling stability and rate capability at 25 °C.

Probing the Mechanically Stable Solid Electrolyte Interphase and the Implications in Design Strategies

The inevitable volume expansion of secondary battery anodes during cycling imposes forces on the solid electrolyte interphase (SEI). The battery performance is closely related to the capability of SEI to maintain intact under the cyclic loading conditions, which basically boils down to the mechanical properties of SEI. The volatile and complex nature of SEI as well as its nanoscale thickness and environmental sensitivity make the interpretation of its mechanical behavior many roadblocks. Widely varied approaches are adopted to investigate the mechanical properties of SEI, and diverse opinions are generated. The lack of consensus at both technical and theoretical levels has hindered the development of effective design strategies to maximize the mechanical stability of SEIs. Here, the essential and desirable mechanical properties of SEI, the available mechanical characterization methods, and important issues meriting attention for higher test accuracy are outlined. Previous attempts to optimize battery performance by tuning SEI mechanical properties are also scrutinized, inconsistencies in these efforts are elucidated, and the underlying causes are explored. Finally, a set of research protocols is proposed to accelerate the achievement of superior battery cycling performance by improving the mechanical stability of SEI.