Coacervate-Based Instant and Repeatable Underwater Adhesive with Anticancer and Antibacterial Properties

Interfacial Study of Steel Joints Prepared with a Catechol-Modified Epoxy Adhesive with Enhanced Bonding Performance and Durability

Bonding is widely used in aircraft and vehicles due to its light weight and simple process, but its strength decreases sharply in hot and humid environments. Anodization treatment, used for enhancing aging performance, is environmentally harmful and unsuitable for steel. In this study, a catechol-modified epoxy adhesive (CMEA) was prepared on a hectogram scale. Comparative analysis with phenol-modified epoxy adhesive (PMEA) and pristine epoxy adhesive (EA) revealed that the underwater bonding of CMEA (13.0 MPa) on stainless steel (SS) significantly outperformed the two control groups. Moreover, after 32 days of hydrothermal aging at 50 °C, CMEA preserved 73.9% of its initial bonding strength, while PMEA and EA retained 59.8 and 11.4%, respectively. Furthermore, X-ray photoelectron spectroscopy (XPS) etching at different times to analyze the interface between adhesives and the SS substrate indicated a marked increase in the O-H/O2- value at the interface between CMEA and the SS substrate compared to the two control groups. The above results demonstrated that the catechol-modified adhesive enhanced the bonding and aging properties of the adhesive, possibly due to the formation of a higher density of hydroxyl groups at the interface between the adhesive and the SS substrate. These findings contribute to the understanding of the enhancement mechanism of catechol in improving the bonding and aging properties of adhesives and suggest a feasible direction for designing adhesives with high bonding strength and high durability.

Facile Solvent-Free Fabrication of All-Small-Molecule Supramolecular Photothermal Bioadhesive for Sutureless Wound Closure

Achieving underwater adhesion possesses a significant challenge, primarily due to the presence of interfacial water, which restricts the potential applications of adhesives. In this study, we present a straightforward and environmentally friendly one-pot approach for synthesizing a solvent-free supramolecular TPFe bioadhesive composed of thioctic acid, proanthocyanidins, and FeCl3. The bioadhesive exhibits excellent biocompatibility and photothermal antibacterial properties and demonstrates effective adhesion on various substrates in both wet and dry environments. Importantly, the adhesive strength of this bioadhesive on steel exceeds 1.2 MPa and that on porcine skin exceeds 100 kPa, which is greater than the adhesive strength of most reported bioadhesives. In addition, the bioadhesive exhibits the ability to effectively halt bleeding, close wounds promptly, and promote wound healing in the rat skin wound model. Therefore, the TPFe bioadhesive has potential as a medical bioadhesive for halting bleeding quickly and promoting wound healing in the biomedical field. This study provides a new idea for the development of bioadhesives with firm wet adhesion.

Fabrication of Low-Temperature Fast Gelation β-Cyclodextrin-Based Hydrogel-Loaded Medicine for Wound Dressings

β-Cyclodextrin (β-CD) is often used as a drug carrier for biomedical materials due to its unique cavity structure. Herein, β-CD was modified by acryloyl chloride and further copolymerized with N-isopropylacrylamide (NIPAM) and acrylic acid (AA) to obtain PNIPAM-co-β-CD-AC. The results showed that the critical phase transition temperature of PNIPAM/β-CD-AC could be controlled at 19 °C, and the fast sol-gel phase transition was realized in 2-10 s. The hydrophobic drug carried in this hydrogel can constantly be released for more than 6 days at pH values (pH 5.5-8), and the duration may match the recovery of the wound. As a dressing hydrogel, its rapid gel formation and inversion as well as shear-thinning behavior prevent secondary wound damage. The β-CD-based hydrogel also has good biocompatibility and antioxidant properties, which provide a good potential choice for wound dressings, especially for exposed wounds in winter.

Glycan-Presenting Coacervates Derived from Charged Poly(active esters): Preparation, Phase Behavior, and Lectin Capture

This study presents the preparation and phase behavior of glycan-functionalized polyelectrolytes for capturing carbohydrate-binding proteins and bacteria in liquid condensate droplets. The droplets are formed by complex coacervation of poly(active ester)-derived polyanions and polycations. This approach allows for a straightforward modular introduction of charged motifs and specifically interacting units; mannose and galactose oligomers are used here as first examples. The introduction of carbohydrates has a notable effect on the phase separation and the critical salt concentration, potentially by reducing the charge density. Two mannose binding species, concanavalin A (ConA) and Escherichia coli, are shown to not only specifically bind to mannose-functionalized coacervates but also to some degree to unfunctionalized, carbohydrate-free coacervates. This suggests non-carbohydrate-specific charge-charge interactions between the protein/bacteria and the droplets. However, when mannose interactions are inhibited or when non-binding galactose-functionalized polymers are used, interactions are significantly weakened. This confirms specific mannose-mediated binding functionalization and suggests that introducing carbohydrates reduces non-specific charge-charge interactions by a so far unidentified mechanism. Overall, the presented route toward glycan-presenting polyelectrolytes enables new functional liquid condensate droplets with specific biomolecular interactions.

Designing Bio-Inspired Wet Adhesives through Tunable Molecular Interactions

Marine organisms, such as mussels and sandcastle worms, can master rapid and robust adhesion in turbulent seawater, becoming leading archetypes for the design of underwater adhesives. The adhesive proteins secreted by the organisms are rich in catecholic amino acids along with ionic and amphiphilic moieties, which mediate the adaptive adhesion mainly through catechol chemistry and coacervation process. Catechol allows a broad range of molecular interactions both at the adhesive-substrate interface and within the adhesive matrix, while coacervation promotes the delivery and surface spreading of the adhesive proteins. These natural design principles have been translated to synthetic systems toward the development of biomimetic adhesives with water-resist adhesion and cohesion. This review provides an overview of the recent progress in bio-inspired wet adhesives, focusing on two aspects: (1) the elucidation of the versatile molecular interactions (e.g., electrostatic interactions, metal coordination, hydrogen bonding, and cation-π/anion-π interactions) used by natural adhesives, mainly through nanomechanical characterizations; and (2) the rational designs of wet adhesives based on these biomimetic strategies, which involve catechol-functionalized, coacervation-induced, and hydrogen bond-based approaches. The emerging applications (e.g., tissue glues, surgical implants, electrode binders) of the developed biomimetic adhesives in biomedical, energy, and environmental fields are also discussed, with future research directions proposed.

Polyelectrolyte-multivalent molecule complexes: physicochemical properties and applications

The complexation of polyelectrolytes with other oppositely charged structures gives rise to a great variety of functional materials with potential applications in a wide spectrum of technological fields. Depending on the assembly conditions, polyelectrolyte complexes can acquire different macroscopic configurations such as dense precipitates, nanosized colloids and liquid coacervates. In the past 50 years, much progress has been achieved to understand the principles behind the phase separation induced by the interaction of two oppositely charged polyelectrolytes in aqueous solutions, especially for symmetric systems (systems in which both polyions have similar molecular weight and concentration). However, in recent years, the complexation of polyelectrolytes with alternative building blocks such as small charged molecules (multivalent inorganic species, oligopeptides, and oligoamines, among others) has gained attention in different areas. In this review, we discuss the physicochemical characteristics of the complexes formed by polyelectrolytes and multivalent small molecules, putting a special emphasis on their similarities with the well-known polycation-polyanion complexes. In addition, we analyze the potential of these complexes to act as versatile functional platforms in various technological fields, such as biomedicine and advanced materials engineering.

Getting glued in the sea

Inspired by ocean organisms, scientists have been developing adhesives for application in the marine environment. However, water and high salinity, which not only weaken the interfacial bonding by the hydration layer but also induce the deterioration of adhesives by erosion, swelling, hydrolysis, or plasticization, are detrimental to adhesion, resulting in specific challenges in the development of under-seawater adhesives. In this focus review, current adhesives that are capable of macroscopic adhesion in seawater were summarized. The design strategies and performance of these adhesives were reviewed based on their bonding methods. Finally, some future research directions and perspectives for under-seawater adhesives were discussed.

Catechol-Amine-Decorated Epoxy Resin as an Underwater Adhesive: A Coacervate Concept Using a Liquid Marble Strategy

The attachment phenomena of various hierarchical architectures found in nature, especially underwater adhesion, have drawn extensive attention to the development of similar biomimicking adhesives. Marine organisms show spectacular adhesion characteristics because of their foot protein chemistry and the formation of an immiscible phase (coacervate) in water. Herein, we report a synthetic coacervate derived using a liquid marble route composed of catechol amine-modified diglycidyl ether of bisphenol A (EP) polymers wrapped by silica/PTFE powders. The adhesion promotion efficiency of catechol moieties is established by functionalizing EP with monofunctional amines (MFA) of 2-phenyl ethylamine and 3,4-dihydroxy phenylethylamine (DA). The curing activation of MFA-incorporated resin pointed toward a lower activation energy (50.1-52.1 kJ mol^-1) compared with the neat system (56.7-58 kJ mol^-1). The viscosity build-up and gelation are faster for the catechol-incorporated system, making it ideal for underwater bonding performance. The PTFE-based adhesive marble of the catechol-incorporated resin was stable and exhibited an adhesive strength of 7.5 MPa under underwater bonding conditions.

Advances in Hemostatic Hydrogels That Can Adhere to Wet Surfaces

Currently, uncontrolled bleeding remains a serious problem in emergency, surgical and battlefield environments. Despite the specific properties of available hemostatic agents, sealants, and adhesives, effective hemostasis under wet and dynamic conditions remains a challenge. In recent years, polymeric hydrogels with excellent hemostatic properties have received much attention because of their adjustable mechanical properties, high porosity, and biocompatibility. In this review, to investigate the role of hydrogels in hemostasis, the mechanisms of hydrogel hemostasis and adhesion are firstly elucidated, the adhesion design strategies of hemostatic hydrogels in wet environments are briefly introduced, and then, based on a comprehensive literature review, the studies and in vivo applications of wet-adhesive hemostatic hydrogels in different environments are summarized, and the improvement directions of such hydrogels in future studies are proposed.

Povidone-iodine enhanced underwater tape

Realizing rapid and stable bonding under humid conditions has remained a challenge in adhesion science and wound dressing. In this study, polyacrylate-based underwater tape with water-enhanced adhesion and antimicrobial performance was designed and synthesized. Good underwater adhesion performance is achieved through the reasonable selection of comonomers, among which 4-hydroxybutyl acrylate (4-HBA) and isobornyl acrylate (IBOA) provide rich hydrogen bond interactions and a rigid side chain stable structure, respectively. The former effectively increases the interface strength between the tape and the substrate, while the latter ensures that the tape can maintain a good cohesion strength under water. Besides, povidone iodine (PVP-I₂) as a reinforcing filler and germicidal factor endows the tape with tunable mechanical properties and impressive antimicrobial abilities. This work provides a facile approach to prepare a wet adhesive for medical and industrial fields which can be used as wound dressing and underwater adhesive materials.

Electrochemical Bonding of Hydrogels at Rigid Surfaces

Flexible hydrogels can be chemically/physically bonded on soft surfaces. However, there is a lack of a facile method to build strong interfacial adhesion between hydrogel and various rigid surfaces. Herein, an electrochemical bonding protocol, which improves the interfacial adhesion energy of hydrogel from initial 8 to 3480 J m^-2 , ≈435 times enhancement at rigid glass surface, superior to the most of traditional methods, is proposed. A series of electrochemical bonding models to analyze the bonding mechanism, is demonstrated. The results indicate that the electrode reactions generate Fe³⁺ ions at the anode and OH^- ions at the cathode, which migrate and react to form nanoparticles of Fe(OH)₃ . These nanoparticles form hump-like physical structures at the interface and work as mechanical-bonding sites, enabling the strong interfacial adhesion. Upon applying acidic solution to decompose the nanoparticles, the strong adhesion can be weakened to easily remove hydrogel from the bonded surface. The electrochemically-bonded hydrogel can maintain its adhesion in water, which enables the electrochemical bonding of hydrogels for repairing various damaged surfaces such as plastic water tubes/bags, indicating promising potential for adhesive engineering applications.

Rational design of adhesives for effective underwater bonding

Underwater adhesives hold great promises in our daily life, biomedical fields and industrial engineering. Appropriate underwater bonding can reduce the huge cost from removing the target substance from water, and greatly lift working efficiency. However, different from bonding in air, underwater bonding is quite challenging. The existence of interfacial water prevents the intimate contact between the adhesives and the submerged surfaces, and water environment makes it difficult to achieve high cohesiveness. Even so, in recent years, various underwater adhesives with macroscopic adhesion abilities were emerged. These smart adhesives can ingeniously remove the interfacial water, and enhance cohesion by utilizing their special physicochemical properties or functional groups. In this mini review, we first give a detail introduction of the difficulties in underwater bonding. Further, we overview the recent strategies that are used to construct underwater adhesives, with the emphasis on how to overcome the difficulties of interfacial water and achieve high cohesiveness underwater. In addition, future perspectives of underwater adhesives from the view of practical applications are also discussed. We believe the review will provide inspirations for the discovery of new strategies to overcome the obstacles in underwater bonding, and therefore may contribute to designing effective underwater adhesives.

Molecularly Engineered Protein Glues with Superior Adhesion Performance

Naturally inspired proteins are investigated for the development of bioglues that combine adhesion performance and biocompatibility for biomedical applications. However, engineering such adhesives by rational design of the proteins at the molecular level is rarely reported. Herein, it is shown that a new generation of protein-based glues is generated by supramolecular assembly through de novo designed structural proteins in which arginine triggers robust liquid-liquid phase separation. The encoded arginine moieties significantly strengthen multiple molecular interactions in the complex, leading to ultrastrong adhesion on various surfaces, outperforming many chemically reacted and biomimetic glues. Such adhesive materials enable quick visceral hemostasis in 10 s and outstanding tissue regeneration due to their robust adhesion, good biocompatibility, and superior antibacterial capacity. Remarkably, their minimum inhibitory concentrations are orders of magnitude lower than clinical antibiotics. These advances offer insights into molecular engineering of de novo designed protein glues and outline a general strategy to fabricate mechanically strong protein-based materials for surgical applications.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Development of tannin-bridged cerium oxide microcubes-chitosan cryogel as a multifunctional wound dressing

Efficient resolution of oxidative stress, inflammation, and bacterial infections is crucial for wound healing. To surmount these problems, tannic acid (TA)-bridged CeO₂ microcubes and chitosan (CS) (CS-TA@CeO₂) cryogel was fabricated through hydrogen bonding interactions as a multifunctional wound dressing. Successful introduction and uniform incorporation TA@CeO₂ microtubules enter the CS network. Thus-obtained CS-TA@CeO₂ cryogels displayed a suitable porous structure and swelling rate. Cryogels has excellent tissue adhesion, blood cell coagulation and hemostasis, anti-infection, and cell recruitment functions. In addition, the cryogel also showed good antibacterial activity against gram-positive bacteria and gram-negative bacteria. Based on the in vivo study of the multifunctional mixed cryogels, it promotes fibroblasts' adhesion and proliferation and significantly improves cell proliferation and tissue remodelling in wound beds. Furthermore, the chronic wound healing process in infected full-thickness skin defect models showed that cryogels significantly enhanced angiogenesis, collagen deposition and granulation tissue formation by providing a large amount of antioxidant activity. Therefore, this multifunctional mixed cryogels has potential clinical application value.

Ternary Complex Coacervate of PEG/TA/Gelatin as Reinforced Bioadhesive for Skin Wound Repair

Bioadhesives have attracted more attention in surgery due to their easy operability and abilities of promoting wound closure and tissue healing. However, it is still a great challenge to develop a robust and biocompatible bioadhesive through a facile preparation method. Herein, a ternary complex coacervate comprised of tannic acid (TA), polyethylene glycol (PEG), and gelatin (TPG) is proposed as a novel bioadhesive, which is fabricated by simple physical blending method. The adhesion capacity of TPG was reinforced through programming the cross-linking network of TPG matrix and tailoring the interfacial interactions between matrix and tissue. Curing parameters (pH, temperature, and period) and gelatin content in TPG have crucial impacts on the final comprehensive adhesion performance. The adhesion strength of the optimized formulation, fabricated with 10% (m/m) gelatin (TPG10), was over 3 folds of TPG0 (without gelatin inclusion) after 24 h curing at pH 6 and 37 °C. The mechanism of the reinforced comprehensive adhesion was also investigated, suggesting TA provided tough interfacial adhesion, covalent cross-link of TA-gelatin improved mechanical properties, and the hydrogen bonds mediated dynamic cross-link between TA and PEG enabled the bulk matrix to dissipate energy upon deformation. Furthermore, the additional antibacterial activity, biocompatibility, and suitable degradability endowed TPG10 with desirable wound closure and tissue repairing efficacy on rat skin wound model. Such low-cost, readily prepared, and function-efficient bioadhesive could provide a versatile platform for tissue repair and regeneration.