Near-Infrared Light-Triggered Lysosome-Targetable Carbon Dots for Photothermal Therapy of Cancer

Carbon Dots: A Review with Focus on Sustainability

Carbon dots (CDs) are an emerging class of nanomaterials with attractive optical properties, which promise to enable a variety of applications. An important and timely question is whether CDs can become a functional and sustainable alternative to incumbent optical nanomaterials, notably inorganic quantum dots. Herein, the current CD literature is comprehensively reviewed as regards to their synthesis and function, with a focus on sustainability aspects. The study quantifies why it is attractive that CDs can be synthesized with biomass as the sole starting material and be free from toxic and precious metals and critical raw materials. It further describes and analyzes employed pretreatment, chemical-conversion, purification, and processing procedures, and highlights current issues with the usage of solvents, the energy and material efficiency, and the safety and waste management. It is specially shown that many reported synthesis and processing methods are concerningly wasteful with the utilization of non-sustainable solvents and energy. It is finally recommended that future studies should explicitly consider and discuss the environmental influence of the selected starting material, solvents, and generated byproducts, and that quantitative information on the required amounts of solvents, consumables, and energy should be provided to enable an evaluation of the presented methods in an upscaled sustainability context.

Unit-Emitting Carbon Dots

Understanding the photoluminescence mechanisms of carbon dots (C-dots) is of importance for both fundamental science and their corresponding applications. In this study, we verify the emitting-unit model of C-dots by an upgraded "contrastive analysis" research paradigm. Employing preparative thin-layer chromatography, we recently developed polyamide column chromatography separation techniques, and four kinds of highly correlative C-dots are obtained from a homologous sample made from ortho-aminophenol precursors. Combining comprehensive experimental characterizations, especially the direct evidence from electrospray ionization mass spectrometry, we demonstrate that the photoluminescence of the four C-dots comes from the same polycyclic aromatic hydrocarbon units (named as emitting units) indeed, although these C-dots have substantially different chemical compositions.

Nucleus-targeted carbon dots as peroxidase nanozyme for photoacoustic imaging and phototherapy of tumor

High-purity carbon dots (CDs) with a highly π-conjugated sp2-hybridized graphite structure were prepared by the pulse electrolysis method using the graphite plate as raw material. Photoacoustic signal together with photothermal effect was found in the CDs-dispersed suspensions under near-infrared (NIR) irradiation. For the suspension with the CDs concentration of 500 μg/mL, the photothermal conversion efficiency is high up 64.3% and the solution's temperature can be increased to 82.2 °C under NIR irradiation. Moreover, CDs can be effectively endocytosed by human hepatoma (HepG2) cells with a few hours, act as peroxidase nanozyme to decompose H2O2 and facilitate the production of reactive oxygen species. Under NIR irradiation, CDs exhibit an outstanding apoptosis-inducing effect on HepG2 cells by the photothermal effect. In addition, in vivo experiments show that CDs can be used in photoacoustic imaging (PAI) and guiding the tumor treatment. As a result, the nucleus-targeted CDs with an unique combination of PAI and photothermal effect have potential in cancer diagnosis and treatment.

Fluorescent Nanocarbons: From Synthesis and Structure to Cancer Imaging and Therapy

Nanocarbons are emerging at the forefront of nanoscience, with diverse carbon nanoforms emerging over the past two decades. Early cancer diagnosis and therapy, driven by advanced chemistry techniques, play a pivotal role in mitigating mortality rates associated with cancer. Nanocarbons, with an attractive combination of well-defined architectures, biocompatibility, and nanoscale dimension, offer an incredibly versatile platform for cancer imaging and therapy. This paper aims to review the underlying principles regarding the controllable synthesis, fluorescence origins, cellular toxicity, and surface functionalization routes of several classes of nanocarbons: carbon nanodots, nanodiamonds, carbon nanoonions, and carbon nanohorns. This review also highlights recent breakthroughs regarding the green synthesis of different nanocarbons from renewable sources. It also presents a comprehensive and unified overview of the latest cancer-related applications of nanocarbons and how they can be designed to interface with biological systems and work as cancer diagnostics and therapeutic tools. The commercial status for large-scale manufacturing of nanocarbons is also presented. Finally, it proposes future research opportunities aimed at engendering modifiable and high-performance nanocarbons for emerging applications across medical industries. This work is envisioned as a cornerstone to guide interdisciplinary teams in crafting fluorescent nanocarbons with tailored attributes that can revolutionize cancer diagnostics and therapy.

Chitosan-initiated gold nanoparticles with enhanced fluorescence for unique Fe3+/PPi sensing and photothermal therapy

The design of surface ligands is crucial for ligand-protected gold nanoparticles (AuNPs). Herein, following the principle of green synthesis, environmentally friendly gold nanoparticles (AuNPs@His@CC, AuHC) were fabricated based on dual ligands of histidine and carboxylated chitosan. AuHC showed the advantages of low toxicity, good photoluminescent stability and ideal biocompatibility. Compared with single histidine-coated gold nanoclusters (AuNCs@His, AuH), AuHC presented enhanced fluorescence attributed to the addition of chitosan. The blue-emitting AuHC has a unique response to Fe3+ with detection limits as low as 9.51 nM. Interestingly, the quenched fluorescence of AuHC-Fe3+ system could be restored through the introduction of PPi with a detection limit of 10.6 μM. So an "on-off-on" fluorescence sensing platform was achieved. Apart from good optical properties and sensing, the designed AuHC demonstrated outstanding photothermal conversion efficiency (27.8 %), which made it ideal material for thermal ablation of tumor. To be specific, after laser irradiation (660 nm, 0.78 W cm-2, 10 min) of AuHC, the survival rate of HeLa cells as a tumor cell model decreased to 12.7 %, indicating that AuHC has a significant tumor inhibition effect in vitro. Besides, AuHC also could be a befitting candidate for overcoming drug-resistant tumor cells such as MCF-7/ADR cells. Notably, AuHC can markedly ablate solid tumors in 4T1 tumor-bearing mice after laser irradiation (660 nm, 0.78 W cm-2, 10 min). Hence this work provides insight into the design of multifunctional AuNPs platform for simultaneously integrating the ion sensing and photothermal therapy of cancer.

Folic Acid Functionalized AQ4N/Gd@PDA Nanoplatform with Real-Time Monitoring of Hypoxia Relief and Enhanced Synergistic Chemo/Photothermal Therapy in Glioma

Purpose

Hypoxia is often associated with glioma chemoresistance, and alleviating hypoxia is also crucial for improving treatment efficacy. However, although there are already some methods that can improve efficacy by alleviating hypoxia, real-time monitoring that can truly achieve hypoxia relief and efficacy feedback still needs to be explored.

Methods

AQ4N/Gd@PDA-FA nanoparticles (AGPF NPs) were synthesized using a one-pot method and were characterized. The effects of AGPF NPs on cell viability, cellular uptake, and apoptosis were investigated using the U87 cell line. Moreover, the effectiveness of AGPF NPs in alleviating hypoxia was explored in tumor-bearing mice through photoacoustic imaging. In addition, the diagnosis and treatment effect of AGPF NPs were evaluated by magnetic resonance imaging (MRI) and bioluminescent imaging (BLI) on orthotopic glioma mice respectively.

Results

In vitro experiments showed that AGPF NPs had good dispersion, stability, and controlled release. AGPF NPs were internalized by cells through endocytosis, and could significantly reduce the survival rate of U87 cells and increase apoptosis under irradiation. In addition, we monitored blood oxygen saturation at the tumor site in real-time through photoacoustic imaging (PAI), and the results showed that synergistic mild-photothermal therapy/chemotherapy effectively alleviated tumor hypoxia. Finally, in vivo anti-tumor experiments have shown that synergistic therapy can effectively alleviate hypoxia and inhibit the growth of orthotopic gliomas.

Conclusion

This work not only provides an effective means for real-time monitoring of the dynamic feedback between tumor hypoxia relief and therapeutic efficacy, but also offers a potential approach for the clinical treatment of gliomas.

Advancing Cancer Treatment: Enhanced Combination Therapy through Functionalized Porous Nanoparticles

Cancer remains a major global health challenge, necessitating the development of innovative treatment strategies. This review focuses on the functionalization of porous nanoparticles for combination therapy, a promising approach to enhance cancer treatment efficacy while mitigating the limitations associated with conventional methods. Combination therapy, integrating multiple treatment modalities such as chemotherapy, phototherapy, immunotherapy, and others, has emerged as an effective strategy to address the shortcomings of individual treatments. The unique properties of mesoporous silica nanoparticles (MSN) and other porous materials, like nanoparticles coated with mesoporous silica (NP@MS), metal-organic frameworks (MOF), mesoporous platinum nanoparticles (mesoPt), and carbon dots (CDs), are being explored for drug solubility, bioavailability, targeted delivery, and controlled drug release. Recent advancements in the functionalization of mesoporous nanoparticles with ligands, biomaterials, and polymers are reviewed here, highlighting their role in enhancing the efficacy of combination therapy. Various research has demonstrated the effectiveness of these nanoparticles in co-delivering drugs and photosensitizers, achieving targeted delivery, and responding to multiple stimuli for controlled drug release. This review introduces the synthesis and functionalization methods of these porous nanoparticles, along with their applications in combination therapy.

Multifunctional Carbon Dots for Biomedical Applications: Diagnosis, Therapy, and Theranostic

Designing suitable nanomaterials is an ideal strategy to enable early diagnosis and effective treatment of diseases. Carbon dots (CDs) are luminescent carbonaceous nanoparticles that have attracted considerable attention. Through facile synthesis, they process properties including tunable light emission, low toxicity, and light energy transformation, leading to diverse applications as optically functional materials in biomedical fields. Recently, their potentials have been further explored, such as enzyme-like activity and ability to promote osteogenic differentiation. Through refined synthesizing strategies carbon dots, a rich treasure trove for new discoveries, stand a chance to guide significant development in biomedical applications. In this review, the authors start with a brief introduction to CDs. By presenting mechanisms and examples, the authors focus on how they can be used in diagnosing and treating diseases, including bioimaging failure of tissues and cells, biosensing various pathogenic factors and biomarkers, tissue defect repair, anti-inflammation, antibacterial and antiviral, and novel oncology treatment. The introduction of the application of integrated diagnosis and treatment follows closely behind. Furthermore, the challenges and future directions of CDs are discussed. The authors hope this review will provide critical perspectives to inspire new discoveries on CDs and prompt their advances in biomedical applications.

Advances in the Application of Photothermal Composite Scaffolds for Osteosarcoma Ablation and Bone Regeneration

Photothermal therapy is a promising approach to cancer treatment. The energy generated by the photothermal effect can effectively inhibit the growth of cancer cells without harming normal tissues, while the right amount of heat can also promote cell proliferation and accelerate tissue regeneration. Various nanomaterials have recently been used as photothermal agents (PTAs). The photothermal composite scaffolds can be obtained by introducing PTAs into bone tissue engineering (BTE) scaffolds, which produces a photothermal effect that can be used to ablate bone cancer with subsequent further use of the scaffold as a support to repair the bone defects created by ablation of osteosarcoma. Osteosarcoma is the most common among primary bone malignancies. However, a review of the efficacy of different types of photothermal composite scaffolds in osteosarcoma is lacking. This article first introduces the common PTAs, BTE materials, and preparation methods and then systematically summarizes the development of photothermal composite scaffolds. It would provide a useful reference for the combination of tumor therapy and tissue engineering in bone tumor-related diseases and complex diseases. It will also be valuable for advancing the clinical applications of photothermal composite scaffolds.

Advances in Magnetic Carbon Dots: A Theranostics Platform for Fluorescence/Magnetic Resonance Bimodal Imaging and Therapy for Tumors

Theranostics technology that combines tumor diagnosis or monitoring with therapy is an important direction for the future development of tumor treatment. It takes advantage of efficiently observing tumor tissues, monitoring tumor treatment in real time, and significantly improving the cure efficiency. Magnetic carbon dots (CDs) are of wide interest as molecular imaging probes, drug carriers, photosensitizers, and radiosensitizers in the integration of tumor fluorescence/magnetic resonance bimodal diagnosis and treatment because of their small size, good optical stability, magnetic relaxation rate, and biocompatibility. This review first analyzes and compares the synthesis methods and physicochemical properties of magnetic CDs in recent years and then concludes their mechanism in tumor fluorescence/magnetic resonance bimodal imaging and therapy in details. Subsequently, the research progress of their application in tumor theranostics are summarized. Finally, the problems and challenges of magnetic CDs for development at this stage are prospected. This review provides new ideas for their controlled synthesis and application in efficient and precise therapy for tumors.

Photothermal Carbon Dots Chelated Hydroxyapatite Filler: High Photothermal Conversion Efficiency and Enhancing Adhesion of Hydrogel

The synthesis of photothermal carbon/hydroxyapatite composites poses challenges due to the binding modes and relatively low photothermal conversion efficiency. To address these challenges, the calcium ions chelated by photothermal carbon dots (PTC-CDs) served as the calcium source for the synthesis of photothermal carbon dots chelated hydroxyapatite (PTC-HA) filler via the coprecipitation method. The coordination constant K and chelation sites of PTC-HA were 7.20 × 102 and 1.61, respectively. Compared to PTC-CDs, the coordination constant K and chelation sites of PTC-HA decreased by 88 and 35% due to chelating to hydroxyapatite, respectively. PTC-HA possesses fluorescence and photothermal performance with a 62.4% photothermal conversion efficiency. The incorporation of PTC-HA filler significantly enhances as high as 76% the adhesion performance of the adhesive hydrogel. PTC-HA with high photothermal conversion efficiency and enhancing adhesion performance holds promise for applications in high photothermal conversion efficiency, offering tissue adhesive properties and fluorescence capabilities to the hydrogel.

Carbon dots and composite materials with excellent performances in cancer-targeted bioimaging and killing: a review

Carbon dots (CDs) are nanomaterials with excellent properties, including good biocompatibility, small size, ideal photoluminescence and surface modification, and are becoming one of the most attractive nanomaterials for the imaging, detection and treatment of tumors. Based on these advantages, CDs can be combined other materials to obtain composite particles with improved, even new, performance, mainly in photothermal and photodynamic therapies. This paper reviews the research progress of CDs and their composites in targeted tumor imaging, detection, diagnosis, drug delivery and tumor killing. It also discusses and proposes the challenges and perspectives of their future applications in these fields. This review provides ideas for future applications of novel CD-based materials in the diagnosis and treatment of cancer.

Receptor-Targeted Carbon Nanodot Delivery through Polymer Caging and Click Chemistry-Supported LRP1 Ligand Attachment

Carbon nanodots present resistance to photobleaching, bright photoluminescence, and superior biocompatibility, making them highly promising for bioimaging applications. Herein, nanoprobes were caged with four-armed oligomers and subsequently modified with a novel DBCO-PEG-modified retro-enantio peptide ligand reL57, enhancing cellular uptake into U87MG glioma cells highly expressing low-density lipoprotein receptor-related protein 1 (LRP1). A key point in the development of the oligomers was the incorporation of ε-amino-linked lysines instead of standard α-amino-linked lysines, which considerably extended the contour length per monomer. The four-armed oligomer 1696 was identified as the best performer, spanning a contour length of ~8.42 nm for each arm, and was based on an altering motive of two cationic ε-amidated lysine tripeptides and two tyrosine tripeptides for electrostatic and aromatic stabilization of the resulting formulations, cysteines for disulfide-based caging, and N-terminal azidolysines for click-modification. This work highlights that well-designed four-armed oligomers can be used for noncovalent coating and covalent caging of nanoprobes, and click modification using a novel LRP1-directed peptide ligand facilitates delivery into receptor-expressing target cells.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

A facile approach for sulphur and nitrogen co-doped carbon nanodots to improve photothermal eradication of drug-resistant bacteria

In this study, we produced S, N co-doped CNDs (SN@CNDs) by using dimethyl sulfoxide (DMSO) and formamide (FA) as single sources of S and N, respectively. We varied the S/N ratios by adjusting the volume ratios of DMSO and FA and investigated their effect on the red-shift of the CNDs' absorption peak. Our findings demonstrate that SN@CNDs synthesized using a volume ratio of 5:6 between DMSO and FA exhibit the most significant absorption peak redshift and enhanced near-infrared absorption performance. Based on comparative analysis of the particle size, surface charge, and fluorescence spectrum of the S@CNDs, N@CNDs, and SN@CNDs, we propose a possible mechanism to explain the change of optical properties of CNDs due to S, N doping. Co-doping creates a more uniform and smaller band gap, resulting in a shift of the Fermi level and a change in energy dissipation from radioactive to non-radiative decay. Importantly, the as-prepared SN@CNDs exhibited a photothermal conversion efficiency of 51.36% at 808 nm and demonstrated exceptional photokilling effects against drug-resistant bacteria in both in vitro and in vivo experiments. Our facile method for synthesizing S and N co-doped CNDs can be extended to the preparation of other S and N co-doped nanomaterials, potentially improving their performance.

Biomimetic Biomembrane Encapsulation and Targeted Delivery of a Nitric Oxide Release Platform for Therapy of Parkinson's Disease

The existence of the blood-brain barrier (BBB) and the complex inflammatory environment in the brain are two major obstacles in the treatment of Parkinson's disease (PD). As a target group, we modified the red blood cell membrane (RBCM) on the surface of upconversion nanoparticles (UCNPs) in this study to effectively target the brain. Mesoporous silicon, coated with UCNPs (UCM), was loaded with S-nitrosoglutathione (GSNO) as the nitric oxide (NO) donor. Then, UCNPs were excited to emit green light (540 nm) by 980 nm near-infrared (NIR). In addition, it produced a light-responsive anti-inflammatory effect by promoting the release of NO from GSNO and lowering the brain's level of proinflammatory factors. A series of experiments demonstrated that this strategy could effectively mitigate the inflammatory response damage of neurons in the brain.

Efficient preparation of nitrogen-doped lignin-based carbon nanotubes and the selectivity of nitrogen speciation for photothermal therapy

In this study, the lignin was pre-modified using small-molecule nitrogen-containing compounds, and then the nitrogen-doped lignin-based carbon nanotubes (L-NCNTs) were fabricated by pyrolysis using the modified lignin as raw materials. The obtained L-NCNTs were multi-walled carbon nanotubes with diameters between 10 and 80 nm. The modification of lignin had an important effect on the nitrogen morphology of L-NCNTs, and promoted the high selectivity of pyridine-N in the L-NCNTs. Defects and pyridinic-N structure were conducive to boosting photothermal properties of the L-NCNTs. The photothermal conversion efficiency of the L-NCNTs after 808 nm laser irradiation for 5 min reached 58.8 %. The L-NCNTs can be used as photothermal agents in drug delivery system to achieve mild photothermal therapy, and it is basically non-toxic to normal cells, indicating good biocompatibility. This work provides new ideas for development of lignin-based high value-added products from biomass.

Recent developments in carbon dots: a biomedical application perspective

Recently, newly developed carbon-based nanomaterials known as carbon dots (CDs) have generated significant interest in nanomedicine. However, current knowledge regarding CD research in the biomedical field is still lacking. An overview of the most recent development of CDs in biomedical research is given in this review article. Several crucial CD applications, such as biosensing, bioimaging, cancer therapy, and antibacterial applications, are highlighted. Finally, CD-based biomedicine's challenges and future potential are also highlighted to enrich biomedical researchers' knowledge about the potential of CDs and the need for overcoming various technical obstacles.

Novel construction of multifunctional photo-responsive and nucleic acid-triggered doxorubicin-releasing liposomes for cancer therapy

All-in-one nano theranostics integrating accurate diagnosis and combined therapy is promising for high-efficacy tumor treatment and receiving significant attention. In this study, we develop photo-controlled release liposomes with nucleic acid-triggered fluorescence and photoactivity for tumor imaging and synergistic antitumor therapy. Copper phthalocyanine as a photothermal agent is fused into lipid layers to prepare liposomes encapsulating cationic zinc phthalocyanine ZnPc(TAP)₄¹²⁺ and doxorubicin, followed by the modification of RGD peptide on the surface to obtain the final product RGD-CuPc:ZnPc(TAP)₄¹²⁺:DOX@LiPOs (RCZDL). RCZDL possesses favorable stability, significant photothermal effect, and photo-controlled release function through the characterization of physicochemical properties. It is shown that the fluorescence and ROS generation could be turned on by intracellular nucleic acid after illumination. RCZDL exhibits synergistic cytotoxicity, increased apoptosis, and significantly promoted cell uptake. Subcellular localization analysis indicates that ZnPc(TAP)₄¹²⁺ tends to be distributed in the mitochondria of HepG2 cells treated with RCZDL after exposure to light. The results of experiments in vivo on H22 tumor-bearing mice demonstrate that RCZDL had excellent tumor targeting, a prominent photothermal effect at the tumor sites, and synergistic antitumor efficiency. More importantly, little RCZDL has been found to be accumulated in the liver, and most were quickly metabolized by the liver. The results confirm that the proposed new intelligent liposomes provide a simple and cost-effective way for tumor imaging and combinatorial anticancer therapy.

A hypoxia-activated photothermal agent inhibits multiple heat shock proteins for low-temperature photothermal therapy

A near-infrared (NIR) organic photothermal agent (PTA) to inhibit three types of heat shock proteins (HSPs) was synthesized, which could be activated under hypoxic conditions for low-temperature photothermal therapy (PTT) of cancer.

Indocyanine green derived carbon dots with significantly enhanced properties for efficient photothermal therapy

A simple yet effective strategy to enhance the properties of traditional dye indocyanine green (ICG) in all aspects was proposed and demonstrated. Specifically, indocyanine green-derived carbon dots (ICGCDs) were synthesized from ICG via a simple hydrothermal treatment. The ICGCDs exhibited significantly enhanced thermal stability and anti-photobleaching compared to ICG. Furthermore, their photothermal properties were also notably strengthened, in which a wider functional pH range, 50% improvement in photothermal conversion efficiency and superior photothermal cyclability were achieved. Thanks to these superior properties, ICGCDs were demonstrated as efficient NIR bioimaging and photothermal agents in both in vitro and in vivo experiments. Most excitingly, the strategy demonstrated in this study is likely to have broad applications in other systems.

Carbonaceous Nanomaterials for Phototherapy of Cancer

Carbonaceous nanomaterials (CNMs) have drawn tremendous biomedical research interest because of their unique structural features. Recently, CNMs, namely carbon dots, fullerenes, graphene, etc, have been successful in establishing them as considerable nanotherapeutics for phototherapy applications due to their electrical, thermal, and surface properties. This review aims to crosstalk the current understanding of CNMs as multimodal compounds in photothermal and photodynamic therapies as an integrated approach to treating cancer. It also expounds on phototherapy's biomechanics and illustrates its relation to cancer biomodulation. Critical considerations related to the structural properties, fabrication approaches, surface functionalization strategies, and biosafety profiles of CNMs have been explained. This article provides an overview of the most recent developments in the study of CNMs used in phototherapy, emphasizing their usage as nanocarriers. To conquer the current challenges of CNMs, we can raise the standard of cancer therapy for patients. The review will be of interest to the researchers working in the area of photothermal and photodynamic therapies and aiming to explore CNMs and their conjugates in cancer therapy.

Nanostructures as Photothermal Agents in Tumor Treatment

Traditional methods of tumor treatment such as surgical resection, chemotherapy, and radiation therapy have certain limitations, and their treatment effects are not always satisfactory. As a new tumor treatment method, photothermal therapy based on nanostructures has attracted the attention of researchers due to its characteristics of minimally invasive, low side effects, and inhibition of cancer metastasis. In recent years, there has been a variety of inorganic or organic nanostructures used in the field of photothermal tumor treatment, and they have shown great application prospects. In this paper, the advantages and disadvantages of a variety of nanomaterials/nanostructures as photothermal agents (PTAs) for photothermal therapy as well as their research progress are reviewed. For the sake of clarity, the recently reported nanomaterials/nanostructures for photothermal therapy of tumor are classified into five main categories, i.e., carbon nanostructures, noble metal nanostructures, transition metal sulfides, organic polymer, and other nanostructures. In addition, future perspectives or challenges in the related field are discussed.

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2

A portable sensor for visual monitoring of Fe²⁺ and H₂O₂, two-dimensional Co₃O₄ modified by nano-IrO₂ (IrO₂@2D Co₃O₄) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO₂@2D Co₃O₄ possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe²⁺ and H₂O₂ could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO₂@2D Co₃O₄ dispersion and its functionalized test strips. The linear regression equations were A₆₅₂ = 0.5940 - 0.00041 c_Fe²⁺ (10^-8 M, R² = 0.9927) for Fe²⁺ and ∆A₆₅₂ = 0.0023 c_H2O2 + 0.00025 (10^-7 M, R² = 0.9982) for H₂O₂, respectively. When applied to visual monitoring of aqueous Fe²⁺ and intercellular H₂O₂, the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10^-8 mol/L and 1.02 × 10^-7 mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO₂@2D Co₃O₄ and its selective responses to Fe²⁺ and H₂O₂ were investigated in detail.

Emerging metal doped carbon dots for promising theranostic applications

As a bridge between organic fluorophores and inorganic quantum dots, carbon dots (CDs) have been recognized as emerging nanotheranostics for biomedical applications owing to their distinctive merits such as superior optical properties, flexible modification, adjustable functionalities, and remarkable photoactive therapeutic outcome, etc. Compared to metal free CDs, the introduction of metal ion in CDs endowed metal-doped CDs (MCDs) with tunable optical properties and new intrinsic properties, thereby illustrating its different capabilities from metal-free CDs for bioimaging and therapy. This review aims to summarize the recent progress of photonic MCDs as emerging nanoagent for theranostic application such as disease-related diagnostic (involving biosensing and bioimaging) and cancer therapy. The challenges and potential development of MCDs in nanotheranostic fields are also discussed.

Lysosome-targetable brightly green fluorescence carbon dots for real-time monitoring in cell and highly efficient removal in environment of hypochlorite

Due to the lacks of lysosome localization group and reaction/interaction site for hypochlorite (ClO^-) on the surface of the carbon dots (C-dots), no C-dots-based lysosome-targeted fluorescence probes have, so far, been reported for real-time monitoring intracellular ClO^-. In this work, 1,3,6-trinitropyrene (TNP) was used as a precursor to prepare C-dots with maximum excitation and emission wavelengths at 485 and 532 nm, respectively, and quantum yield ∼ 27% by a hydrothermal approach at 196 °C for 6 h under a reductive atmosphere. The brightly green C-dots can sensitively and quickly respond to ClO^- in aqueous solution through surface chemical reaction, showing a linear relationship in the range of 0.5-120 μΜ ClO^- with 0.27 μΜ of limit of detection (LOD). Most significantly, the C-dots can localize at intracellular lysosome to image ClO^- in lysosomes. Also, the magnetic nanocomposites (C-dots@Fe₃O₄ MNCs) were fabricated via a simple electrostatic self-assembly between Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) and C-dots for highly efficient removal of ClO^- in real samples. Therefore, lysosome-targetable C-dots-based probes for real-time monitoring ClO^- were successfully constructed, opening up a promising door to investigate the biological functions and pathological roles of ClO^- at organelle levels.

A comprehensive review on multi-colored emissive carbon dots as fluorescent probes for the detection of pharmaceutical drugs in water

Exposure to constituent hazardous chemicals in medical products has become a threat to environmental health across the globe. Excessive medication and the mishandling of pharmaceutical drugs can lead to the increased presence of chemicals in the aquatic environment, causing water pollution. Only a few nanomaterials exist for the detection of these chemicals and they are limited in use due to their adverse toxicity, instability, cost, and low aqueous solubility. In contrast, carbon dots (C-dots), a member of the family of carbon-based nanomaterials, have various beneficial properties including excellent biocompatibility, strong photoluminescence, low photobleaching, tunable fluorescence, and easy surface modification. Herein, we summarize recent advancements in various synthetic strategies for high-quality tunable fluorescent C-dots. The root of fluorescence has been briefly explained via the quantum confinement effect, surface defects, and molecular fluorescence. The surface functional moieties of C-dots have been investigated in depth to recognize the various types of pharmaceutical drugs that are used for the treatment of patients. The modulation of C-dot fluorescence in the course of their interactions with these drugs has been carefully explained. Different types of interaction mechanisms behind the C-dot fluorescence alteration have been discussed. Finally, the challenges and future perspectives of C-dots have been proposed for the vibrant field development of C-dot-based drug sensors.

Regulating photochemical properties of carbon dots for theranostic applications

As a new zero-dimensional carbon-based material, carbon dots (CDs) have attracted extensive attention owing to their advantages such as easy preparation and surface modification, good biocompatibility and water solubility, and tunable photochemical properties. CDs have become one of the most promising nanomaterials in the field of fluorescent sensing, bioimaging, and cancer therapy. How to precisely regulate the photochemical properties, especially the absorption, fluorescence, phosphorescence, reactive oxygen species generation, and photothermal conversion of the CDs, is the key to developing highly efficient phototheranostics for cancer treatment. Although many studies on cancer therapy using CDs have been published, no review has focused on the regulation of photochemical properties of CDs for phototheranostic applications. In this review, we summarized the strategies such as the selection of suitable carbon source, heteroatomic doping, optimum reaction conditions, surface modification, and assembly strategy to efficiently regulate the photochemical properties of the CDs to meet the requirements of different practical applications. This review might provide some valuable insight and new ideas for the development of CDs with excellent phototheranostic performance. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Perylene-Derived Hydrophilic Carbon Dots with Polychromatic Emissions as Superior Bioimaging and NIR-Responsive Photothermal Bactericidal Agent

Little progress has been achieved on the synthesis of hydrophilic carbon dots (CDs), derived from polycyclic aromatic hydrocarbons, as an excellent photothermal agent. In this study, a strategy was developed to synthesize highly photoluminescent greenish-yellow emissive CDs based on nitration followed by hydrothermal carbonization of the polycyclic aromatic hydrocarbon precursor, perylene. The perylene-derived CDs (PY-CDs) exhibited an excellent NIR-light (808 nm) harvesting property toward high photothermal conversion efficiency (PCE = ∼56.7%) and thus demonstrated remarkable NIR-light responsive photothermal bactericidal performance. Furthermore, these fluorescent PY-CD nanoprobes displayed excitation-dependent polychromatic emissions in the range of 538-600 nm, with the maximum emission at 538 nm. This enables intense multicolor biological imaging of cellular substances with long-term photostability, nontoxicity, and effective subcellular distribution. The bactericidal action of PY-CDs is likely due to the elevated reactive oxygen species amplification in cooperation with the hyperthermia effect. This study offers a potential substitute for multicolor imaging-guided metal-free carbon-based photothermal therapy.

Carbon dots for photothermal applications

Carbon dots are zero-dimensional nanomaterials that have garnered significant research interest due to their distinct optical properties, biocompatibility, low fabrication cost, and eco-friendliness. Recently, their light-to-heat conversion ability has led to several novel photothermal applications. In this minireview, we categorize and describe the photothermal application of carbon dots along with methods incorporated to enhance their photothermal efficiency. We also discuss the possible mechanisms by which the photothermal effect is realized in these carbon-based nanoparticles. Taken together, we hope to provide a comprehensive landscape highlighting several promising research directions for using carbon dots for photothermal applications.

Micro-/nano-fluidic devices and in vivo fluorescence imaging based on quantum dots for cytologic diagnosis

Semiconductor quantum dots (QDs) possess attractive merits over traditional organic dyes, such as tunable emission, narrow emission spectra and good resistance against optical bleaching, and play a vital role in biosensing and bioimaging for cytologic diagnoses. Microfluidic technology is a potentially useful strategy, as it provides a rapid platform for tracing of disease markers. In vivo fluorescence imaging (FI) based on QDs has become popular for the analysis of complex biological processes. We herein report the applications of multifunctional fluorescent QDs as sensitive probes for diagnoses on cancer medicine and stem cell therapy via microfluidic chips and in vivo imaging.

Ruthenium photosensitizer anchored gold nanorods for synergistic photodynamic and photothermal therapy

Ruthenium polypyridyl complexes have been widely used as bioprobes and photosensitizers. However, several disadvantages including slow cellular uptake, nonspecific binding with biomolecules and toxicity limit their applications. In this study, a nanocarrier of human serum albumin coated gold nanorods was developed to deliver a ruthenium photosensitizer for PDT/PTT combination therapy. The HSA coating endowed the nanodrug with high biocompatibility and stability under physiological conditions. Ru-GNR-HSANPs generate ¹O₂ and hydroxyl radicals to kill cancer cells under blue light irradiation, and exhibit excellent photothermal anticancer effects under 808 nm light irradiation. Significant synergistic anticancer effects were achieved by combined PDT/PTT therapy. Importantly, Ru-GNR-HSANPs can have the synergistic PDT/PTT functions with no need of drug release from the carrier.

Engineered Cellulose Nanofiber Membranes with Ultrathin Low-Dimensional Carbon Material Layers for Photothermal-Enhanced Osmotic Energy Conversion

As a promising clean energy source, membrane-based osmotic energy harvesting has been widely investigated and developed through optimizing the membrane structure in recent years. For chasing higher energy conversion performance, various external stimuli have been introduced into the osmotic energy harvesting systems as assistant factors. Light as a renewable and well-tunable energy form has drawn great attention. Normally, it needs massive photoresponsive materials for improving the energy conversion performance and this hinders its wide applications. Herein, we fabricate a cellulose nanofiber (CNF) membrane with an ultrathin layer of low-dimensional carbon materials (LDCMs) for photothermal-enhanced osmotic energy conversion. The ultralow loading carbon quantum dot, carbon nanotube, and graphene oxide (LDCM/CNF = 1:200 wt) are used for light-to-heat conversion to build the heat gradient across the membrane. The output power density of the osmotic energy generator has increased from ∼3.55 to ∼7.67 W/m² under a 50-fold concentration gradient with light irradiation. This work shows the great potential of the CNF as a nanofluidic platform and the photothermal enhancement in osmotic energy conversion, and the ultralow loading design provides a practical and economical way to fully utilize other energy resources for enhancing osmotic energy conversion.

Multifunctional Carbon Dots-Based Nanoplatform for Bioimaging and Quaternary Ammonium Salt/Photothermal Synergistic Antibacterial

The emergence of drug resistance and superbugs poses a devastating threat to public health, even lead to death. Thus, it is significant to develop a novel antibacterial agent to combat...