1
|
Li M, Xie S, Tian G, Chen G, Guo Z. Biomimetic Leaf-Shaped Wedge Structure with Mixed Wettability for Fog Harvesting. ACS APPLIED MATERIALS & INTERFACES 2024; 16:42931-42941. [PMID: 39103239 DOI: 10.1021/acsami.4c08254] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/07/2024]
Abstract
Water scarcity is a pressing issue in arid and semi-arid regions, making fog harvesting a promising method for water collection. However, enhancing the rate of fog harvesting remains a challenge. Controlling the movement of droplets on functional surfaces is crucial for the development of effective water-harvesting devices. In this study, a three-dimensional (3D) fog-harvesting device with mixed wettability is fabricated using a combination of physical and chemical techniques. With inspiration drawn from natural organisms, such as the desert beetle and Nephrolepis cordifolia, which can both live in low humidity, a copper substrate with a leaf-shaped wedge superhydrophilic structure and flat superhydrophobic regions is fabricated for fog harvesting. The modified surface results in a maximum 49.89% improvement in fog-harvesting efficiency compared to the original copper substrate. The synergistic effect of the 3D structure and mixed wettability of this study offers an idea for improving fog collection efficiency, with potential implications for energy sustainability water resources.
Collapse
Affiliation(s)
- Mengwei Li
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, Hubei 430062, People's Republic of China
| | - Shangzhen Xie
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, Hubei 430062, People's Republic of China
| | - Guangyi Tian
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, Hubei 430062, People's Republic of China
| | - Guopeng Chen
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, Hubei 430062, People's Republic of China
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, Hubei 430062, People's Republic of China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, Gansu 730000, People's Republic of China
| |
Collapse
|
2
|
Dai Z, Lei M, Ding S, Zhou Q, Ji B, Wang M, Zhou B. Durable superhydrophobic surface in wearable sensors: From nature to application. EXPLORATION (BEIJING, CHINA) 2024; 4:20230046. [PMID: 38855620 PMCID: PMC11022629 DOI: 10.1002/exp.20230046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Accepted: 10/02/2023] [Indexed: 06/11/2024]
Abstract
The current generation of wearable sensors often experiences signal interference and external corrosion, leading to device degradation and failure. To address these challenges, the biomimetic superhydrophobic approach has been developed, which offers self-cleaning, low adhesion, corrosion resistance, anti-interference, and other properties. Such surfaces possess hierarchical nanostructures and low surface energy, resulting in a smaller contact area with the skin or external environment. Liquid droplets can even become suspended outside the flexible electronics, reducing the risk of pollution and signal interference, which contributes to the long-term stability of the device in complex environments. Additionally, the coupling of superhydrophobic surfaces and flexible electronics can potentially enhance the device performance due to their large specific surface area and low surface energy. However, the fragility of layered textures in various scenarios and the lack of standardized evaluation and testing methods limit the industrial production of superhydrophobic wearable sensors. This review provides an overview of recent research on superhydrophobic flexible wearable sensors, including the fabrication methodology, evaluation, and specific application targets. The processing, performance, and characteristics of superhydrophobic surfaces are discussed, as well as the working mechanisms and potential challenges of superhydrophobic flexible electronics. Moreover, evaluation strategies for application-oriented superhydrophobic surfaces are presented.
Collapse
Affiliation(s)
- Ziyi Dai
- Joint Key Laboratory of the Ministry of EducationInstitute of Applied Physics and Materials EngineeringUniversity of MacauAvenida da UniversidadeTaipaMacauChina
- State Key Laboratory of Crystal MaterialsInstitute of Novel SemiconductorsSchool of MicroelectronicsShandong UniversityJinanChina
| | - Ming Lei
- Joint Key Laboratory of the Ministry of EducationInstitute of Applied Physics and Materials EngineeringUniversity of MacauAvenida da UniversidadeTaipaMacauChina
| | - Sen Ding
- Joint Key Laboratory of the Ministry of EducationInstitute of Applied Physics and Materials EngineeringUniversity of MacauAvenida da UniversidadeTaipaMacauChina
| | - Qian Zhou
- School of Physics and ElectronicsCentral South UniversityChangshaChina
| | - Bing Ji
- School of Physics and ElectronicsHunan Normal UniversityChangshaChina
| | - Mingrui Wang
- Department of Mechanical EngineeringUniversity of AucklandAucklandNew Zealand
| | - Bingpu Zhou
- Joint Key Laboratory of the Ministry of EducationInstitute of Applied Physics and Materials EngineeringUniversity of MacauAvenida da UniversidadeTaipaMacauChina
| |
Collapse
|
3
|
Chakrapani Gunarasan JP, Lee JW. Active Surface Area-Dependent Water Harvesting of Desert Beetle-Inspired Hybrid Wetting Surfaces. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:5499-5507. [PMID: 38412425 DOI: 10.1021/acs.langmuir.4c00020] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/29/2024]
Abstract
The increasing frequency of water scarcity is an acute worldwide problem. Nature-inspired water harvesting from fog is an important method to obtain freshwater in arid areas. Existing literature reports varied and diversified results in water harvesting capacity by employing a biphilic surface with control over hydrophilic and hydrophobic patterns. In this study, we first demonstrate a facile and scalable method to fabricate a biphilic surface using a simple electroless etching and desilanization technique. Considering the nucleation, growth, and transport of condensate, biphilic surfaces with controlled active surface area of hydrophilic spots were given special attention. We studied the water collection performance of pattern shape with its associated active surface area and further evaluated the critical surface area beyond which the water collection efficiency decreases. A high water collection capacity of 2050 mg cm-2 h-1 was achieved, and the hydrophilic active area-engineered surface retained its efficiency even after 50 test cycles. We further demonstrate high collection efficiency with a square pattern compared to a triangular path-like-patterned surface. The observations and surface engineering strategies reported in this study can provide insights into efficient and sustainable water harvesting devices.
Collapse
Affiliation(s)
| | - Jeong-Won Lee
- Advanced Nano Surface Engineering Laboratory, Department of Mechanical Engineering, Chosun University, Gwangju 61452, South Korea
| |
Collapse
|
4
|
Fu Y, Ai S, Guo Z, Liu W. Biomimetic 3D efficient fog harvester by synergistic wettability effect. J Colloid Interface Sci 2023; 649:646-654. [PMID: 37369166 DOI: 10.1016/j.jcis.2023.06.142] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2023] [Revised: 06/12/2023] [Accepted: 06/19/2023] [Indexed: 06/29/2023]
Abstract
By collecting water in the air, it is an important way to solve the problem of water shortage in arid and semi-arid areas. Improving the efficiency of fog harvesting is still a great challenge to be overcome. The use of 3D structure is an excellent strategy, here, a Multiple-biomimetic 3D hydrophilic and superhydrophobic fog harvester with a hump-valley structure was prepared by the combination of thermal processing and spraying. Inspired by biological water collection in nature, a 3D porous sponge surface with hydrophilic valley and superhydrophobic hump was obtained by two-step treatment. This surface structure showed excellent fog harvesting performance, which was 185 % higher than the original sponge. This structure accelerates the capture, transfer and transport of droplets during the fog harvesting process and greatly improves the efficiency of fog harvest. The results show that the chemical gradient and structural gradient actuation we constructed on the melamine sponge surface can effectively improve the fog collection efficiency. A surface with a linear hump-valley mixed wettability pattern is designed, and it is proved that fog collection efficiency can be effectively improved at the droplet capture and transfer stage and transport stage respectively. This study highlights a simple and cheap integrated fog harvester material design.
Collapse
Affiliation(s)
- Ye Fu
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Shulun Ai
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China.
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China.
| | - Weimin Liu
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| |
Collapse
|
5
|
Thomas TM, Mahapatra PS. Wicking assisted condenser platform with patterned wettability for space application. Sci Rep 2023; 13:18095. [PMID: 37872326 PMCID: PMC10593764 DOI: 10.1038/s41598-023-45294-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2023] [Accepted: 10/18/2023] [Indexed: 10/25/2023] Open
Abstract
Vapor condensation is extensively used in applications that demand the exchange of a substantial amount of heat energy or the vapor-liquid phase conversion. In conventional condensers, the condensate removal from a subcooled surface is caused by gravity force. This restricts the use of such condensers in space applications or horizontal orientations. The current study demonstrates proof-of-concept of a novel plate-type condenser platform for passively removing condensate from a horizontally oriented surface to the surrounding wicking reservoir without gravity. The condensing surface is engineered with patterned wettabilities, which enables the continuous migration of condensate from the inner region of the condenser surface to the side edges via surface energy gradient. The surrounding wicking reservoir facilitates the continuous absorption of condensate from the side edges. The condensation dynamics on different substrates with patterned wettabilities are investigated, and their condensation heat transfer performance is compared. The continuous migration of condensate drops from a superhydrophobic to a superhydrophilic area can rejuvenate the nucleation sites in the superhydrophobic area, resulting in increased heat transport. The proposed condenser design with engineered wettability can be used for temperature and humidity management applications in space.
Collapse
Affiliation(s)
- Tibin M Thomas
- Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India
| | - Pallab Sinha Mahapatra
- Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India.
| |
Collapse
|
6
|
Gao C, Zhang L, Hou Y, Zheng Y. A UV-Resistant Heterogeneous Wettability-Patterned Surface. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2304080. [PMID: 37442804 DOI: 10.1002/adma.202304080] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/02/2023] [Revised: 07/10/2023] [Accepted: 07/11/2023] [Indexed: 07/15/2023]
Abstract
Preparing UV-resistant heterogeneous wettability patterns is critical for the practical application of surfaces with heterogeneous wettability. However, combining UV-resistant superhydrophobic and superhydrophilic materials on heterogeneous surfaces is challenging. Inspired by the structure of cell membranes, a UV-resistant heterogeneous wettability-patterned surface (UPS) is designed via laser ablation of the coating of multilayer structures. UV-resistant superhydrophobic silica patterns can be created in situ on surfaces covered with superhydrophilic TiO2 nanoparticles. The UV resistance time of the UPS with a TiO2 -based surface is more than two orders of magnitude higher than that obtained with other surface molecular modification methods that require a mask. The cell-membrane-like structure of the UPS regulates the migration of internal siloxane chain segments in the hydrophilic and hydrophobic regions of the surface. The UPS enables efficient patterning of functional materials under UV irradiation, controlling the wetting behavior of liquids in open-air systems. Furthermore, its heterogeneous wettability remains stable even after 50 h of intense UV irradiation (365 nm, 500 mW cm-2 ). These UV-resistant heterogeneous wettability patterned surfaces will likely be applied in microfluidics, cell culture, energy conversion, and water collection in the future.
Collapse
Affiliation(s)
- Chunlei Gao
- Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, P.R. China
- School of Mechanical Engineering and Automation, Beihang University, Beijing, 100191, P.R. China
| | - Lei Zhang
- Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, P.R. China
| | - Yongping Hou
- Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, P.R. China
| | - Yongmei Zheng
- Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, P.R. China
| |
Collapse
|
7
|
Song J, Liu J, Li M, Li S, Kappl M, Butt HJ, Hou Y, Yeung KL. Hierarchically Branched Siloxane Brushes for Efficient Harvesting of Atmospheric Water. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301561. [PMID: 37096929 DOI: 10.1002/smll.202301561] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2023] [Revised: 03/31/2023] [Indexed: 05/03/2023]
Abstract
Atmospheric water harvesting is considered a viable source of freshwater to alleviate water scarcity in an arid climate. Water condensation tends to be more efficient on superhydrophobic surfaces as the spontaneous coalescence-induced droplet jumping on superhydrophobic surfaces enables faster condensate removal. However, poor water nucleation on these surfaces leads to meager water harvest. A conventional approach to the problem is to fabricate micro- and nanoscale biphilic structures. Nonetheless, the process is complex, expensive, and difficult to scale. Here, the authors present an inexpensive and scalable method based on manipulating the water-repellent coatings of superhydrophobic surfaces. Flexible siloxane can facilitate water nucleation, while a branched structure promotes efficient droplet jumping. Moreover, ToF-SIMS analysis indicated that branched siloxane provides a better water-repellent coating coverage than linear siloxane and the siloxanes comprise hydrophilic and hydrophobic molecular segments. Thus, the as-prepared superhydrophobic surface, TiO2 nanorods coated with branched siloxanes harvested eight times more water than a typical fluoroalkylsilane (FAS)-coated surface under a low 30% relative humidity and performed better than most reported biphasic materials.
Collapse
Affiliation(s)
- Jiayu Song
- Department of Chemical and Biological Engineering, the Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong SAR, China
| | - Jie Liu
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Meng Li
- Department of Chemical and Biological Engineering, the Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong SAR, China
| | - Shuai Li
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Michael Kappl
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Hans-Jürgen Butt
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Youmin Hou
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
- School of Power and Mechanical Engineering, Wuhan University, Wuhan, 430072, China
| | - King Lun Yeung
- Department of Chemical and Biological Engineering, the Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong SAR, China
- Division of Environment and Sustainability, the Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong SAR, China
- HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute, Futian, Shenzhen, China
| |
Collapse
|
8
|
Yan D, Chen Y, Liu J, Song J. Super-Fast Fog Collector Based on Self-Driven Jet of Mini Fog Droplets. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301745. [PMID: 37156743 DOI: 10.1002/smll.202301745] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 04/25/2023] [Indexed: 05/10/2023]
Abstract
Freshwater scarcity crisis threatens human life and economic security. Collecting water from the fog seems to be an effective method to defuse this crisis. Nonetheless, the existing fog collection methods have the limitations of the low fog collection rate and efficiency because of their gravity-based droplet shedding. Here, the aforementioned limitations are resolved by proposing a new fog collection method based on the self-driven jet phenomenon of the mini fog droplets. A prototype fog collector (PFC) composed of a square container that is filled with water is first designed. Both sides of the PFC are superhydrophobic but covered with superhydrophilic pore array. The mini fog droplets touching the side wall are easily captured and spontaneously and rapidly penetrate into the pores to form jellyfish-like jets, which greatly increases the droplet shedding frequency, guaranteeing a higher fog collection rate and efficiency compared with the existing fog collection methods. Based on this, a more practical super-fast fog collector is finally successfully designed and fabricated which is assembled by several PFCs. This work is hoping to resolve the water crisis in some arid but foggy regions.
Collapse
Affiliation(s)
- Defeng Yan
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Yang Chen
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Jinming Liu
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Jinlong Song
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, 116024, P. R. China
| |
Collapse
|
9
|
Peng Z, Fu Y, Guo Z. Origami-like 3D Fog Water Harvestor with Hybrid Wettability for Efficient Fog Harvesting. ACS APPLIED MATERIALS & INTERFACES 2023; 15:38110-38123. [PMID: 37525393 DOI: 10.1021/acsami.3c07343] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/02/2023]
Abstract
Collecting water in fog has also become a breakthrough to solve the hidden danger of water shortage in some arid areas. The three-dimensional (3D) structure fog collection material can increase the surface area in direct contact with the fog flow and reduce the quick flow of fog, which can effectively improve the fog collection efficiency. Imitating the three-dimensional structure of corrugated paper, the 3D fog collecting material with hybrid wettability was prepared by chemical and physical means. We discuss the influence of different wettability combinations on the fog collection efficiency of 3D structures and study the influence of spraying times and illumination times on the surface wettability during the construction of wettability. We also study the influence of the concavity and tip as well as the bending angle on the fog collection in the 3D structure and obtain the most reasonable concavity and convex ratio and bending angle. The superhydrophilic and superhydrophobic 3D structure fog harvesting material prepared by us performs well in the fog harvesting process, and the fog harvesting efficiency reaches 1.442 g cm-2 h-1. The fog collection efficiency is 418% of the original zinc sheet. At the same time, compared with the superhydrophilic and superhydrophobic hybrid two-dimensional (2D) plane, the increase is 168%, and compared with the superhydrophobic 3D structure, the increase is 150%.
Collapse
Affiliation(s)
- Zhouliang Peng
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Ye Fu
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| |
Collapse
|
10
|
Ji X, Shuai S, Liu S, Weng Y, Zheng F. Silicon-Based Superslippery/Superhydrophilic Striped Surface for Highly Efficient Fog Harvesting. MATERIALS (BASEL, SWITZERLAND) 2023; 16:5423. [PMID: 37570127 PMCID: PMC10419386 DOI: 10.3390/ma16155423] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2023] [Revised: 07/25/2023] [Accepted: 07/26/2023] [Indexed: 08/13/2023]
Abstract
Fog-harvesting performance is influenced by surface wettability, patterned structure and the heat transfer coefficient. In this work, we have prepared different surfaces with a stripe array of superhydrophilic, superslippery and superslippery/superhydrophilic surfaces for fog harvesting on silicon substrates using photolithography and silver-assisted chemical etching. The surface wettability and heat transfer coefficients of the above samples have been investigated. We analyzed the contact angle, sliding angle and transport state of droplets on these surfaces. The fog-harvesting rate of all samples under different voltages of the cooling pad (V = 0, 2.0, 2.5, 3.0, 3.5 V) was measured. Results showed that the superslippery/superhydrophilic striped surface could achieve rapid droplet nucleation, directional transport and efficient collection due to its superhydrophilic striated channels and the Laplace pressure difference between different wettability regions. At a condensation voltage of 3.5 V, the fog-harvesting rate efficiencies of the uniformly striped superhydrophilic and superslippery surface were 1351 mg·cm-2·h-1 and 1265 mg·cm-2·h-1, respectively, while the fog-harvesting rate of the superslippery/superhydrophilic striped surface was 1748 mg·cm-2·h-1. Compared with the original silicon surface, the maximum fog-harvesting rate of the superslippery/superhydrophilic striped surface was improved by 86.9%. This study offers significant insights into the impact of heat transfer and silicon surface wettability on the process of fog collection.
Collapse
Affiliation(s)
- Xiang Ji
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China; (X.J.)
| | - Shunxu Shuai
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China; (X.J.)
| | - Shuai Liu
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China; (X.J.)
| | - Yuyan Weng
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China; (X.J.)
| | - Fengang Zheng
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China; (X.J.)
- SJTU-Pinghu Institute of Intelligent Optoelectronics, Jiaxing 314200, China
| |
Collapse
|
11
|
Jiang X, Liu B, Zeng Q, Yang F, Guo Z. Mussel-Inspired Robust Peony-like Cu 3(PO 4) 2 Composite Switchable Superhydrophobic Surfaces for Bidirectional Efficient Oil/Water Separation. ACS APPLIED MATERIALS & INTERFACES 2023; 15:13700-13710. [PMID: 36862602 DOI: 10.1021/acsami.2c21151] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
To alleviate the economic and environmental damage caused by industrial discharges of oily wastewater, materials applied for efficient oil/water separation are receiving significant attention from researchers and engineers. Among others, switchable wettable materials for bidirectional oil/water separation show great potential for practical applications. Inspired by mussels, we utilized a simple immersion method to construct a polydopamine (PDA) coating on a peony-like copper phosphate surface. Then, TiO2 was deposited on the PDA coating surface to build a micro-nano hierarchical structure, which was modified with octadecanethiol (ODT) to obtain a switchable wettable peony-like superhydrophobic surface. The water contact angle of the obtained superhydrophobic surface reached 153.5°, and the separation efficiency was as high as 99.84% with a flux greater than 15,100 L/(m2·h) after 10 separation cycles for a variety of heavy oil/water mixtures. Notably, the modified membranes have a unique photoresponsiveness, transforming to superhydrophilic upon ultraviolet irradiation, achieving separation efficiencies of up to 99.83% and separation fluxes greater than 32,200 L/(m2·h) after 10 separation cycles for a variety of light oil/water mixtures. More importantly, this switch behavior is reversible, and the high hydrophobicity can be restored after heating to achieve efficient separation of heavy oil/water mixtures. In addition, the prepared membranes can maintain high hydrophobicity under acid-base conditions and after 30 sandpaper abrasion cycles, and damaged membranes can be restored to superhydrophobicity after a brief modification in the ODT solution. This simple-to-prepare, easy-to-repair, robust membrane with switchable wettability shows great potential in the field of oil/water separation.
Collapse
Affiliation(s)
- Xian Jiang
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Bing Liu
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Qinghong Zeng
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Fuchao Yang
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| |
Collapse
|
12
|
Wu H, Xiong Y, Yu D, Yang P, Shi H, Huang L, Wu Y, Xi M, Xiao P, Yang L. Fe-Co controlled super-hygroscopic hydrogels toward efficient atmospheric water harvesting. NANOSCALE 2022; 14:18022-18032. [PMID: 36444669 DOI: 10.1039/d2nr04830b] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Extracting atmospheric moisture for freshwater production is an appealing way to mitigate the global water crisis. However, the low moisture sorption capacity and high desorption temperature are the major bottlenecks for efficient atmospheric water harvesting. Herein, we develop a transition metal super-hygroscopic hydrogel by an economical strategy, which is constructed through a facile coordination between metal salts and ethanolamine. When the empty electron orbital of the metal ion is coordinated with the lone electron pair of nitrogen or oxygen atom, the water active sorption site is formed. A single water layer is bonded on the sites by a coordination effect, followed by physical interaction with water to form multi-layer structures. The Fe and Co ions in the hydrogel function as dual sorption sites to capture moisture, which can harvest additional water by the synergistic effect of bimetals. As a result, the bimetal hydrogel contributes to a high water uptake of 5.22 g g-1 at 95% RH, triggering the desorption process by one solar intensity due to its low desorption temperature (≤50 °C).
Collapse
Affiliation(s)
- Hangfei Wu
- Chongqing Key Laboratory of Soft Condensed Matter Physics and Smart Materials, College of Physics, Chongqing University, Chongqing 401331, P. R. China.
| | - Yuli Xiong
- College of Physical and Electrical Engineering, Chongqing Normal University, Chongqing, P. R. China
| | - Duohuan Yu
- Chongqing Key Laboratory of Soft Condensed Matter Physics and Smart Materials, College of Physics, Chongqing University, Chongqing 401331, P. R. China.
| | - Peixin Yang
- Chongqing Key Laboratory of Soft Condensed Matter Physics and Smart Materials, College of Physics, Chongqing University, Chongqing 401331, P. R. China.
| | - Huihui Shi
- College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, P. R. China
| | - Lu Huang
- College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, P. R. China
| | - Yali Wu
- College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, P. R. China
| | - Mufeng Xi
- Key Laboratory of Optoelectronic Technology and System of Ministry of Education, College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, P. R. China.
| | - Peng Xiao
- Chongqing Key Laboratory of Soft Condensed Matter Physics and Smart Materials, College of Physics, Chongqing University, Chongqing 401331, P. R. China.
| | - Lin Yang
- Key Laboratory of Optoelectronic Technology and System of Ministry of Education, College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, P. R. China.
| |
Collapse
|
13
|
Peng J, Wu L, Zhang H, Wang B, Si Y, Jin S, Zhu H. Research progress on eco-friendly superhydrophobic materials in environment, energy and biology. Chem Commun (Camb) 2022; 58:11201-11219. [PMID: 36125075 DOI: 10.1039/d2cc03899d] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
In the past few years, bioinspired eco-friendly superhydrophobic materials (EFSMs) have made great breakthroughs, especially in the fields of environment, energy and biology, which have made remarkable contributions to the sustainable development of the natural environment. However, some potential challenges still exist, which urgently need to be systematically summarized to guide the future development of this field. Herein, in this review, initially, we discuss the five typical superhydrophobic models, namely, the Wenzel, Cassie, Wenzel-Cassie, "lotus", and "gecko" models. Then, the existence of superhydrophobic creatures in nature and artificial EFSMs are summarized. Then, we focus on the applications of EFSMs in the fields of environment (self-cleaning, wastewater purification, and membrane distillation), energy (solar evaporation, heat accumulation, and batteries), and biology (biosensors, biomedicine, antibacterial, and food packaging). Finally, the challenges and developments of eco-friendly superhydrophobic materials are highlighted.
Collapse
Affiliation(s)
- Jiao Peng
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, P. R. China.
| | - Laiyan Wu
- Key Laboratory of Resources Conversion and Pollution Control of the State Ethnic Affairs Commission, College of Resources and Environmental Science, South-Central Minzu University, Wuhan 430074, P. R. China
| | - Hui Zhang
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, P. R. China.
| | - Ben Wang
- College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518000, P. R. China
| | - Yifan Si
- Department of Biomedical Engineering, City University of Hong Kong, Hongkong SAR 999077, P. R. China.
| | - Shiwei Jin
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, P. R. China.
| | - Hai Zhu
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong SAR 999077, P. R. China. .,China State Key Laboratory of Biogeology and Environmental Geology, Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, P. R. China
| |
Collapse
|
14
|
Li JZ, Dong LM, Zheng LL, Fu WL, Zhang JJ, Zhang L, Hu Q, Chen P, Gao ZF, Xia F. Molecular Visual Sensing, Boolean Logic Computing, and Data Security Using a Droplet-Based Superwetting Paradigm. ACS APPLIED MATERIALS & INTERFACES 2022; 14:40447-40459. [PMID: 36006781 DOI: 10.1021/acsami.2c11532] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Inspired by information processing and logic operations of life, many artificial biochemical systems have been designed for applications in molecular information processing. However, encoding the binary synergism between matter, energy, and information in a superwetting system remains challenging. Herein, a superwetting paradigm was proposed for multifunctional applications including molecular visual sensing and data security on a superhydrophobic surface. A Triton X-100-encapsulated gelatin (TeG) hydrogel was prepared and selectively decomposed by trypsin, releasing the surfactant to decrease the surface tension of a droplet. Integrating the droplet with the superhydrophobic surface, the superwetting behavior was utilized for visual detection and information encoding. Interestingly, the proposed TeG hydrogel can function as an artificial gelneuron for molecular-level logic computing, where the combination of matters (superhydrophobic surface, trypsin, and leupeptin) acts as inputs to interact with energy (liquid surface tension and solid surface energy) and information (binary character), resulting in superwettability transitions (droplet surface tension, contact angle, rolling angle, and bounce) as outputs. Impressively, the TeG gelneuron can be further developed as molecular-level double cryptographic steganography to encode, encrypt, and hide specific information (including the maze escape route and content of the classical literature) due to its programmability, stimuli responsive ability, and droplet concealment. This study will encourage the development of advanced molecular paradigms and their applications, such as superwetting visual sensing, molecular computing, interaction, and data security.
Collapse
Affiliation(s)
- Jin Ze Li
- Shandong Provincial Key Laboratory of Detection Technology for Tumor Markers, College of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, P. R. China
| | - Lu Ming Dong
- Shandong Provincial Key Laboratory of Detection Technology for Tumor Markers, College of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, P. R. China
| | - Lin Lin Zheng
- Shandong Provincial Key Laboratory of Detection Technology for Tumor Markers, College of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, P. R. China
| | - Wen Long Fu
- Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, P. R. China
| | - Jing Jing Zhang
- Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, P. R. China
| | - Lei Zhang
- Department of Chemical Engineering and Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L3G1, Canada
| | - Qiongzheng Hu
- School of Pharmaceutical Sciences, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, P. R. China
| | - Pu Chen
- Department of Chemical Engineering and Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L3G1, Canada
| | - Zhong Feng Gao
- Shandong Provincial Key Laboratory of Detection Technology for Tumor Markers, College of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, P. R. China
- Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, P. R. China
| | - Fan Xia
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, P. R. China
| |
Collapse
|
15
|
Zhu SQ, Feng R, Liang ZH, Wang XL, Wang YZ, Song F. Efficient Water Harvesting Enabled by Porous Architecture-Containing Hybrid Surfaces. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c00717] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Si-Qi Zhu
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| | - Rui Feng
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| | - Zheng-Hong Liang
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| | - Xiu-Li Wang
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| | - Yu-Zhong Wang
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| | - Fei Song
- The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Polymer Materials Engineering, College of Chemistry, Sichuan University, Chengdu 610064, China
| |
Collapse
|
16
|
Recent Advances in Water Harvesting: A Review of Materials, Devices and Applications. SUSTAINABILITY 2022. [DOI: 10.3390/su14106244] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Water is essential for life. However, water scarcity is becoming one of the most severe issues worldwide in terms of its potential impacts. There are diverse forms of water on earth and water harvesting from them is quite feasible to access more fresh water for drinking, sanitation and irrigation. In this review, we summarize the recent technologies of various water harvesters, based on different forms of water resources, aiming to improve the water harvesting systems. We mainly address three points: forming principles of different water circumstance, working mechanism of typical water harvesters, and the challenges and future research orientations. This systemic review on recent technologies in water harvesting provides insight into the sustainable water resources, water supply, and water collecting systems for the future.
Collapse
|
17
|
Mérai L, Deák Á, Dékány I, Janovák L. Fundamentals and utilization of solid/ liquid phase boundary interactions on functional surfaces. Adv Colloid Interface Sci 2022; 303:102657. [PMID: 35364433 DOI: 10.1016/j.cis.2022.102657] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2022] [Revised: 03/23/2022] [Accepted: 03/24/2022] [Indexed: 12/16/2022]
Abstract
The affinity of macroscopic solid surfaces or dispersed nano- and bioparticles towards liquids plays a key role in many areas from fluid transport to interactions of the cells with phase boundaries. Forces between solid interfaces in water become especially important when the surface texture or particles are in the colloidal size range. Although, solid-liquid interactions are still prioritized subjects of materials science and therefore are extensively studied, the related literature still lacks in conclusive approaches, which involve as much information on fundamental aspects as on recent experimental findings related to influencing the wetting and other wetting-related properties and applications of different surfaces. The aim of this review is to fill this gap by shedding light on the mechanism-of-action and design principles of different, state-of-the-art functional macroscopic surfaces, ranging from self-cleaning, photoreactive or antimicrobial coatings to emulsion separation membranes, as these surfaces are gaining distinguished attention during the ongoing global environmental and epidemic crises. As there are increasing numbers of examples for stimulus-responsive surfaces and their interactions with liquids in the literature, as well, this overview also covers different external stimulus-responsive systems, regarding their mechanistic principles and application possibilities.
Collapse
|
18
|
Zhu H, Cai S, Liao G, Gao ZF, Min X, Huang Y, Jin S, Xia F. Recent Advances in Photocatalysis Based on Bioinspired Superwettabilities. ACS Catal 2021. [DOI: 10.1021/acscatal.1c04049] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Affiliation(s)
- Hai Zhu
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, People’s Republic of China
- China State Key Laboratory of Biogeology and Environmental Geology, Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, People’s Republic of China
| | - Si Cai
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, People’s Republic of China
| | - Guangfu Liao
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, China University of Geosciences, Wuhan 430074, People’s Republic of China
| | - Zhong Feng Gao
- Collaborative Innovation Center of Tumor Marker Detection Technology, Equipment and Diagnosis-Therapy Integration in Universities of Shandong, Shandong Provincial Key Laboratory of Detection Technology for Tumor Markers, College of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, People’s Republic of China
| | - Xuehong Min
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, People’s Republic of China
| | - Yu Huang
- China State Key Laboratory of Biogeology and Environmental Geology, Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, People’s Republic of China
| | - Shiwei Jin
- Key Laboratory of Catalysis and Energy Materials Chemistry of Education, Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, People’s Republic of China
| | - Fan Xia
- China State Key Laboratory of Biogeology and Environmental Geology, Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, People’s Republic of China
| |
Collapse
|