Oxygenic Enrichment in Hybrid Ruthenium Sulfide Nanoclusters for an Optimized Photothermal Effect

Baiting bacteria with amino acidic and peptidic corona coated defect-engineered antimicrobial nanoclusters for optimized wound healing

Keeping steps ahead of the bacteria in the race for more efficacious antibacterial strategies is increasingly difficult with the advent of bacterial resistance genes. Herein, we engineered copper sulfide nanoclusters (CuSx NCs) with variable sulfur defects for enhanced dual-treatment of bacterial infections by manipulating photothermal effects and Fenton-like activity. Next, by encasing CuSx NCs with a complex mixture of amino acids and short peptides derived from Luria-Bertani bacterial culture media as a protein corona, we managed to coax E. Coli to take up these CuSx NCs. As a whole, Amino-Pep-CuSx NCs was perceived as a food source and actively consumed by bacteria, enhancing their effective uptake by at least 1.5-fold greater than full length BSA protein BSA-corona CuSx NCs. Through strategically using defect-engineering, we successfully fine-tune photothermal effect and Fenton-like capacity of CuSx NCs. Increased sulfur defects lead to reduced but sufficient heat generation under solar-light irradiation and increased production of toxic hydroxyl radicals. By fine-tuning sulfur defects during synthesis, we achieve CuSx NCs with an optimal synergistic effect, significantly enhancing their bactericidal properties. These ultra-small and biodegradable CuSx NCs can rapidly break down after treatment for clearance. Thus, Amino-Pep-CuSx NCs demonstrate effective eradication of bacteria both in vitro and in vivo because of their relatively high uptake, optimal balanced photothermal and chemodynamic outcomes. Our study offers a straightforward and efficient method to enhance bacterial uptake of next generation of antibacterial agents.

Oxygen-Bonded Amorphous Transition Metal Dichalcogenides with pH-Responsive Reactive Oxygen Biocatalysis for Combined Antibacterial and Anti-inflammatory Therapies in Diabetic Wound Healing

Diabetic wound healing is a formidable challenge, often complicated by biofilms, immune dysregulation, and hindered vascularization within the wound environments. The intricate interplay of these microenvironmental factors has been a significant oversight in the evolution of therapeutic strategies. Herein, the design of an efficient and versatile oxygen-bonded amorphous transition metal dichalcogenide biocatalyst (aRuS-Or) with pH-responsive reactive oxygen biocatalysis for combined antibacterial and anti-inflammatory therapies in promoting diabetic wound healing is reported. Leveraging the incorporation of Ru─O bonds, aRuS-Or exhibits optimized adsorption/desorption behavior of oxygen intermediates, thereby enhancing both the reactive oxygen species (ROS) generation activity in acidic conditions and ROS scavenging performance in neutral environments. Remarkably, aRuS-Or demonstrates exceptional bactericidal potency within infected milieus through biocatalytic ROS generation. Beyond its antimicrobial capability, post-eradication, aRuS-Or serves a dual role in mitigating oxidative stress in inflammatory wounds, providing robust cellular protection and fostering an M2-phenotype polarization of macrophages, which is pivotal for accelerating the wound repair process. The findings underscore the multifaceted efficacy of aRuS-Or, which harmoniously integrates high antibacterial action with anti-inflammatory and pro-angiogenic properties. This triad of functionalities positions aRuS-Or as a promising candidate for the comprehensive management of complex diabetic ulcers, addressing the unmet needs in the current therapeutics.

Cysteine-Induced Chirality Evolution of Molybdenum Disulfide Nanodots from a Bottom-Up Strategy

The transfer of chirality from molecules to synthesized nanomaterials has recently attracted significant attention. Although most studies have focused on graphene and plasmonic metal nanostructures, layered transition metal dichalcogenides (TMDs), particularly MoS2, have recently garnered considerable attention due to their semiconducting and electrocatalytic characteristics. Herein, we report a new approach for the synthesis of chiral molybdenum sulfide nanomaterials based on a bottom-up synthesis method in the presence of chiral cysteine enantiomers. In the synthesis process, molybdenum trioxide and sodium hydrosulfide serve as molybdenum and sulfur sources, respectively. In addition, ascorbic acid acts as a reducing agent, resulting in the formation of zero-dimensional MoS2 nanodots. Moreover, the addition of cysteine enantiomers to the growth solutions contributes to the chirality evolution of the MoS2 nanostructures. The chirality is attributed to the cysteine enantiomer-induced preferential folding of the MoS2 planes. The growth mechanism and chiral structure of the nanomaterials are confirmed through a series of characterization techniques. This work combines chirality with the bottom-up synthesis of MoS2 nanodots, thereby expanding the synthetic methods for chiral nanomaterials. This simple synthesis approach provides new insights for the construction of other chiral TMD nanomaterials with emerging structures and properties. More significantly, the as-formed MoS2 nanodots exhibited highly defect-rich structures and chiroptical performance, thereby inspiring a high potential for emerging optical and electronic applications.

White light powered antimicrobial nanoagents for triple photothermal, chemodynamic and photodynamic based sterilization

Antibacterial nanoagents have been increasingly developed due to their favorable biocompatibility, cost-effective raw materials, and alternative chemical or optical properties. Nevertheless, there is still a pressing need for antibacterial nanoagents that exhibit outstanding bacteria-binding capabilities and high antibacterial efficiency. In this study, we constructed a multifunctional cascade bioreactor (GCDCO) as a novel antibacterial agent. This involved incorporating carbon dots (CDs), cobalt sulfide quantum dots (CoSx QDs), and glucose oxidase (GOx) to enhance bacterial inhibition under sunlight irradiation. The GCDCO demonstrated highly efficient antibacterial capabilities attributed to its favorable photothermal properties, photodynamic activity, as well as the synergistic effects of hyperthermia, glucose-augmented chemodynamic action, and additional photodynamic activity. Within this cascade bioreactor, CDs played the role of a photosensitizer for photodynamic therapy (PDT), capable of generating ˙O2- even under solar light irradiation. The CoSx QDs not only functioned as a catalytic component to decompose hydrogen peroxide (H2O2) and generate hydroxyl radicals (˙OH), but they also served as heat generators to enhance the Fenton-like catalysis process. Furthermore, GOx was incorporated into this cascade bioreactor to internally supply H2O2 by consuming glucose for a Fenton-like reaction. As a result, GCDCO could generate a substantial amount of reactive oxygen species (ROS), leading to a significant synergistic effect that greatly induced bacterial death. Furthermore, the in vitro antibacterial experiment revealed that GCDCO displayed notably enhanced antibacterial activity against E. coli (99+ %) when combined with glucose under simulated sunlight, surpassing the efficacy of the individual components. This underscores its remarkable efficiency in combating bacterial growth. Taken together, our GCDCO demonstrates significant potential for use in the routine treatment of skin infections among diabetic patients.

Recent progress in the development of nanomaterials targeting multiple cancer metabolic pathways: a review of mechanistic approaches for cancer treatment

Cancer is a very heterogeneous disease, and uncontrolled cell division is the main characteristic of cancer. Cancerous cells need a high nutrition intake to enable aberrant growth and survival. To do so, cancer cells modify metabolic pathways to produce energy and anabolic precursors and preserve redox balance. Due to the importance of metabolic pathways in tumor growth and malignant transformation, metabolic pathways have also been given promising perspectives for cancer treatment, providing more effective treatment strategies, and target-specific with minimum side effects. Metabolism-based therapeutic nanomaterials for targeted cancer treatment are a promising option. Numerous types of nanoparticles (NPs) are employed in the research and analysis of various cancer therapies. The current review focuses on cutting-edge strategies and current cancer therapy methods based on nanomaterials that target various cancer metabolisms. Additionally, it highlighted the primacy of NPs-based cancer therapies over traditional ones, the challenges, and the future potential.

Defect Engineering in Biomedical Sciences

With the promotion of nanochemistry research, large numbers of nanomaterials have been applied in vivo to produce desirable cytotoxic substances in response to endogenous or exogenous stimuli for achieving disease-specific therapy. However, the performance of nanomaterials is a critical issue that is difficult to improve and optimize under biological conditions. Defect-engineered nanoparticles have become the most researched hot materials in biomedical applications recently due to their excellent physicochemical properties, such as optical properties and redox reaction capabilities. Importantly, the properties of nanomaterials can be easily adjusted by regulating the type and concentration of defects in the nanoparticles without requiring other complex designs. Therefore, this tutorial review focuses on biomedical defect engineering and briefly discusses defect classification, introduction strategies, and characterization techniques. Several representative defective nanomaterials are especially discussed in order to reveal the relationship between defects and properties. A series of disease treatment strategies based on defective engineered nanomaterials are summarized. By summarizing the design and application of defective engineered nanomaterials, a simple but effective methodology is provided for researchers to design and improve the therapeutic effects of nanomaterial-based therapeutic platforms from a materials science perspective.

Nanoarchitecture-Integrated Hydrogel Systems toward Therapeutic Applications

Hydrogels, as one of the most feasible soft biomaterials, have gained considerable attention in therapeutic applications by virtue of their tunable properties including superior patient compliance, good biocompatibility and biodegradation, and high cargo-loading efficiency. However, hydrogel application is still limited by some challenges like inefficient encapsulation, easy leakage of loaded cargoes, and the lack of controllability. Recently, nanoarchitecture-integrated hydrogel systems were found to be therapeutics with optimized properties, extending their bioapplication. In this review, we briefly presented the category of hydrogels according to their synthetic materials and further discussed the advantages in bioapplication. Additionally, various applications of nanoarchitecture hybrid hydrogels in biomedical engineering are systematically summarized, including cancer therapy, wound healing, cardiac repair, bone regeneration, diabetes therapy, and obesity therapy. Last, the current challenges, limitations, and future perspectives in the future development of nanoarchitecture-integrated flexible hydrogels are addressed.

Targeting Warburg effect to rescue the suffocated photodynamic therapy: A cancer-specific solution

The cancer photodynamic therapy (PDT) is limited by a congenital defect, namely the tumor hypoxia. Cancer cells are characterized by the vigorous oxygen-consuming glycolysis, which is well-known as the "Warburg effect" and one of the primary causes for the hypoxia. Herein, we employed the glucose metabolism as the cancer-specific target to enhance the performance of PDT. The Salvianolic acid B as the inhibitor of glucose uptake and aerobic glycolysis was concomitantly delivered with the photosensitizer chlorin e6 by a redox-responsive organosilica cross-linked micelle. The results demonstrated that the Salvianolic acid B suppressed the glucose metabolism, retarded the oxygen consumption to retain adequate oxygen as the ammo for PDT, which remarkably improve the efficacy of PDT both in vitro and in vivo. Our study not only provides an alternative strategy to address the hypoxia problem for PDT, but also enhances the selectivity of the treatment by targeting the cancer-specific Warburg effect.

NIR Responsive Doxorubicin-Loaded Hollow Copper Ferrite @ Polydopamine for Synergistic Chemodynamic/Photothermal/Chemo-Therapy

Osteosarcoma (OS) is the most serious bone malignancy, and the survival rate has not significantly improved in the past 40 years. Thus, it is urgent to develop a new strategy for OS treatment. Chemodynamic therapy (CDT) as a novel therapeutic method can destroy cancer cells by converting endogenous hydrogen peroxide (H₂ O₂ ) into highly toxic hydroxyl radicals (·OH). However, the therapeutic efficacy of CDT is severely limited by the low catalytic efficiency and overexpressed glutathione (GSH). Herein, an excellent nanocatalytic platform is constructed via a simple solvothermal method using F127 as a soft template to form the hollow copper ferrite (HCF) nanoparticle, followed by the coating of polydopamine on the surface and the loading of doxorubicin (DOX). The Fe³⁺ and Cu²⁺ released from HCF@polydopamine (HCFP) can deplete GSH through the redox reactions, and then trigger the H₂ O₂ to generate ·OH by Fenton/Fenton-like reaction, resulting in enhanced CDT efficacy. Impressively, the photothermal effect of HCFP can further enhance the efficiency of CDT and accelerate the release of DOX. Both in vitro and in vivo experiments reveal that the synergistic chemodynamic/photothermal/chemo-therapy exhibits a significantly enhanced anti-OS effect. This work provides a promising strategy for OS treatment.

Advances in Single-component inorganic nanostructures for photoacoustic imaging guided photothermal therapy

Phototheranostic based on photothermal therapy (PTT) and photoacoustic imaging (PAI), as one of avant-garde medical techniques, have sparked growing attention because it allows noninvasive, deeply penetrative, and highly selective and effective therapy. Among a variety of phototheranostic nanoagents, single-component inorganic nanostructures are found to be novel and attractive PAI and PTT combined nanotheranostic agents and received tremendous attention, which not only exhibit structural controllability, high tunability in physiochemical properties, size-dependent optical properties, high reproducibility, simple composition, easy functionalization, and simple synthesis process, but also can be endowed with multiple therapeutic and imaging functions, realizing the superior therapy result along with bringing less foreign materials into body, reducing systemic side effects and improving the bioavailability. In this review, according to their synthetic components, conventional single-component inorganic nanostructures are divided into metallic nanostructures, metal dichalcogenides, metal oxides, carbon based nanostructures, upconversion nanoparticles (UCNPs), metal organic frameworks (MOFs), MXenes, graphdiyne and other nanostructures. On the basis of this category, their detailed applications in PAI guide PTT of tumor treatment are systematically reviewed, including synthesis strategies, corresponding performances, and cancer diagnosis and therapeutic efficacy. Before these, the factors to influence on photothermal effect and the principle of in vivo PAI are briefly presented. Finally, we also comprehensively and thoroughly discussed the limitation, potential barriers, future perspectives for research and clinical translation of this single-component inorganic nanoagent in biomedical therapeutics.

Flexible polymeric patch based nanotherapeutics against non-cancer therapy

Flexible polymeric patches find widespread applications in biomedicine because of their biological and tunable features including excellent patient compliance, superior biocompatibility and biodegradation, as well as high loading capability and permeability of drug. Such polymeric patches are classified into microneedles (MNs), hydrogel, microcapsule, microsphere and fiber depending on the formed morphology. The combination of nanomaterials with polymeric patches allows for improved advantages of increased curative efficacy and lowered systemic toxicity, promoting on-demand and regulated drug administration, thus providing the great potential to their clinic translation. In this review, the category of flexible polymeric patches that are utilized to integrate with nanomaterials is briefly presented and their advantages in bioapplications are further discussed. The applications of nanomaterials embedded polymeric patches in non-cancerous diseases were also systematically reviewed, including diabetes therapy, wound healing, dermatological disease therapy, bone regeneration, cardiac repair, hair repair, obesity therapy and some immune disease therapy. Alternatively, the limitations, latest challenges and future perspectives of such biomedical therapeutic devices are addressed.

•

The most explored polymeric patches, such as microneedle, hydrogel, microsphere, microcapsule, and fiber are summarized.

•

Polymeric patches integrated with a diversity of nanomaterials are systematically overviewed in non-cancer therapy.

•

The future prospective for the development of polymeric patch based nanotherapeutics is discussed.

Lotus Seedpod-Inspired Crosslinking-Assembled Hydrogels Based on Gold Nanoclusters for Synergistic Osteosarcoma Multimode Imaging and Therapy

Osteosarcoma is difficult to be resected through surgical operations without damage to the bone matrix, while chemotherapy and radiotherapy induce inevitable systemic injury. It is still a major challenge to develop a novel treatment suitable for the complex anatomical structure of the bone. Herein, inspired by lotus seedpods, injectable hydrogels with long-term retention for synergistic osteosarcoma treatment were developed. Gold nanoclusters (GNCs) with strong fluorescence (FL) and computed tomography (CT) imaging effects represented the lotus seeds. The oxidized hyaluronic acid (HA-ALD) chain resembled the stem. HA-ALD and GNCs form crosslinking-assembled hydrogels abbreviated as HG-CAHs through dynamic amide bonds. Compared with DNA-, pH-, and light-mediated assembly, this in situ method induces enhanced photothermal therapy (PTT) ability, ensures high biocompatibility, and retains the imaging function of GNCs, which contribute to lighting up osteosarcoma persistently for further diagnosis and treatment. In addition, the HG-CAHs with outstanding mechanical properties are similar to the lotus seedpods with supportive force and a typical porous structure. They are favorable for the local pH- and near-infrared (NIR)-responsive release of doxorubicin (Dox) owing to the acidic osteosarcoma microenvironment and the Brownian movement. The HG-CAHs ablate osteosarcoma efficiently and reduce metabolic toxicity significantly, which will aid in the development of a new generation of osteosarcoma treatments.

Defect-Rich Molybdenum Sulfide Quantum Dots for Amplified Photoluminescence and Photonics-Driven Reactive Oxygen Species Generation

Transition metal dichalcogenide (TMD) quantum dots (QDs) with defects have attracted interesting chemistry due to the contribution of vacancies to their unique optical, physical, catalytic, and electrical properties. Engineering defined defects into molybdenum sulfide (MoS₂ ) QDs is challenging. Herein, by applying a mild biomineralization-assisted bottom-up strategy, blue photoluminescent MoS₂ QDs (B-QDs) with a high density of defects are fabricated. The two-stage synthesis begins with a bottom-up synthesis of original MoS₂ QDs (O-QDs) through chemical reactions of Mo and sulfide ions, followed by alkaline etching that creates high sulfur-vacancy defects to eventually form B-QDs. Alkaline etching significantly increases the photoluminescence (PL) and photo-oxidation. An increase in defect density is shown to bring about increased active sites and decreased bandgap energy; which is further validated with density functional theory calculations. There is strengthened binding affinity between QDs and O₂ due to lower gap energy (∆E_ST ) between S₁ and T₁ , accompanied with improved intersystem crossing (ISC) efficiency. Lowered gap energy contributes to assist e^- -h⁺ pair formation and the strengthened binding affinity between QDs and ³ O₂ . Defect engineering unravels another dimension of material properties control and can bring fresh new applications to otherwise well characterized TMD nanomaterials.

Sulfur Defect-Engineered Biodegradable Cobalt Sulfide Quantum Dot-Driven Photothermal and Chemodynamic Anticancer Therapy

Chemodynamic therapy (CDT), as a powerful tumor therapeutic approach with low side effects and selective therapeutic efficiency, has gained much attention. However, the low intracellular content of H₂O₂ and the cellular bottleneck of low intracellular oxidative reaction rates at tumor sites have limited the antitumor efficacy of CDT. Herein, a series of sulfur-deficient engineered biodegradable cobalt sulfide quantum dots (CoS_x QDs) were constructed for improved synergistic photothermal- and hyperthermal-enhanced CDT of tumors through regulating the photothermal conversion efficiency (PCE) and Fenton-like activity. Through defect engineering, we modulated the PCE and promoted the Fenton catalytic capability of CoS_x QDs. With increasing defect sites, the Fenton-like activity improved to generate more toxic ^•OH, while the photothermal effect declined slightly. In light of above unique superiorities, the best synergistic effects of CoS_x QDs were obtained through comparing their PCE and catalytic activity by regulating the sulfur defect fraction degree in these QDs during the synthetic process. In addition, the ultrasmall size and biodegradation endowed QDs with the ability to be rapidly decomposed to ions that were easily excreted after therapy, thus reducing biogenic accumulation in the body with lowered systemic side effects. The in vitro/vivo results demonstrated that the photothermal- and hyperthermal-enhanced chemodynamic effect of CoS_x QDs can enable remarkable anticancer properties with favorable biocompatibility. In this study, the defect-driven mechanism for the photothermal-enhanced Fenton-like reaction provides a flexible strategy to deal with different treatment environments, holding great promise in developing a multifunctional platform for cancer treatment in the future.

Biodegradable Protein-Stabilized Inorganic Nanoassemblies for Photothermal Radiotherapy of Hepatoma Cells

Inorganic nanomaterials require optimal engineering to retain their functionality yet can also biodegrade within physiological conditions to avoid chronic accumulation in their native form. In this work, we have developed gelatin-stabilized iron oxide nanoclusters having a primary crystallite size of ∼10 nm and surface-functionalized with indocyanine green (ICG)-bound albumin-stabilized gold nanoclusters (Prot-IONs). The Prot-IONs are designed to undergo disintegration in an acidic microenvironment of tumor in the presence of proteolytic enzymes within 72 h. These nanoassemblies demonstrate bio- and hemocompatibility and show significant photothermal efficiency due to strong near infrared absorption contributed by ICG. The surface gold nanoclusters could efficiently sensitize hepatoma cells to γ-irradiation with substantial cytoskeletal and nuclear damage. Sequential irradiation of Prot-ION-treated cancer cells with near infrared (NIR) laser (λ = 750 nm) and γ-irradiation could cause ∼90% cell death compared to single treatment groups at a lower dose of nanoparticles. The superparamagnetic nature of Prot-IONs imparted significant relaxivity (∼225 mM-1 s-1) for T2-weighted magnetic resonance imaging. Additionally, they could also be engaged as photoacoustic and NIR imaging contrast agents. This work demonstrates bioeliminable inorganic nanoassemblies with significant theranostic potential.