Effect of the Configuration of Copper Oxide-Ceria Catalysts in NO Reduction with CO: Superior Performance of a Copper-Ceria Solid Solution

CeO2-Supported Single-Atom Cu Catalysts Modified with Fe for RWGS Reaction: Deciphering the Role of Fe in the Reaction Mechanism by In Situ/Operando Spectroscopic Techniques

Reverse water-gas shift (RWGS) reaction has attracted much attention as a potential approach for CO2 valorization via the production of synthesis gas, especially over Fe-modified supported Cu catalysts on CeO2. However, most studies have focused solely on investigating the RWGS reaction over catalysts with high Cu and Fe loadings, thus leading to an increase in the complexity of the catalytic system and, hence, preventing the gain of any reliable information about the nature of the active sites and reaction mechanism. In this work, a CeO2-supported single-atom Cu catalyst modified with iron was synthesized and evaluated for the RWGS reaction. The catalytic results reveal a significant synergistic effect between CuCeO2 and Fe, demonstrating an activity up to three times higher than the combined catalytic activities of monometallic catalysts (Fe/CeO2 + CuCeO2) under identical conditions. Various ex situ and in situ/operando techniques are employed to unveil the concealed role of Fe in catalyst activity enhancement. The combined findings from hydrogen temperature-programmed reduction (H2-TPR) and operando electron paramagnetic resonance spectroscopy (EPR) reveal that the added Fe predominantly interacts with Cu-containing surface sites, resulting in the stabilization of higher proportions of Cu single sites. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and operando EPR results unveil a synergistic interplay of Fe with Cu-containing sites and CeO x domains, efficiently enhancing both the reoxidation of Cu+ in Cu+-Ov-Ce3+ moieties and the reducibility of Ce4+ in CeO x domains under RWGS conditions. Detailed mechanistic studies reveal that the RWGS reaction predominantly proceeds via the redox mechanism.

Amorphous MnRuOx Containing Microcrystalline for Enhanced Acidic Oxygen-Evolution Activity and Stability

Compared to Ir, Ru-based catalysts often exhibited higher activity but suffered significant and rapid activity loss during the challenging oxygen evolution reaction (OER) in a corrosive acidic environment. Herein, we developed a hybrid MnRuOx catalyst in which the RuO2 microcrystalline regions serve as a supporting framework, and the amorphous MnRuOx phase fills the microcrystalline interstices. In particular, the MnRuOx-300 catalyst from an annealing temperature of 300 °C contains an optimal amorphous/crystalline heterostructure, providing substantial defects and active sites, facilitating efficient adsorption and conversion of OH-. In addition, the heterostructure leads to a relative increase of the d-band center close to the Fermin level, thus accelerating electron transfer with reduced charge transfer resistance at the active interface between crystalline and amorphous phases during the OER. The catalyst was further thoroughly evaluated under various operating conditions and demonstrated exceptional activity and stability for the OER, representing a promising solution to replace Ir in water electrolyzers.

Visible-light S-scheme heterojunction of copper bismuthate quantum dots decorated Titania-spindles for exceptional tetracycline degradation

The rational heterojunctions for antibiotics degradation have sparked significant attention in wastewater purification. In this study, we report a unique S-scheme photocatalytic system by in-situ growth of CuBi2O4 quantum dots (QDs) onto {101} facet of TiO2 spindles (TiO2-P) via hydrothermal transformation of Na-titanate nanotubes, which is observed by transmission electron microscopy technology. The CuBi2O4/TiO2-P effectively achieves photo-degradation of tetracycline (TC) using visible light (e.g. an 82% TC degradation efficiency at 60 min), which is attributed to the promotion of the charge separation and retaining strong redox capacity at the heterojunction interfaces via the active species of O2-, OH, and h+. Moreover, density functional theory (DFT) calculations show that a built-in electric field forms at the interface of the S-scheme heterojunction. In all, this work introduces a straightforward in-situ hydrothermal growth method to construct S-scheme photocatalysts for effective water treatment.

Enhanced CO oxidation performance over hierarchical flower-like Co3O4 based nanosheets via optimizing oxygen activation and CO chemisorption

Enhancing low-temperature activity is a focus for carbon monoxide (CO) elimination by catalytic oxidation. In this work, the hierarchical flower-like silver (Ag) modified cobalt oxides (Co3O4) nanosheets were prepared by solvothermal method and applied into catalytic CO oxidation. The doped Ag species in the form of AgCoO2 induced the prolongated surface Co-O bond and weaker bond intensity. Consequently, the oxygen activation/migration ability and redox capacity of Ag0.02Co were enhanced with more oxygen vacancies. The chemisorbed CO was preferentially converted to CO2 but not carbonates. The inhibited carbonates accumulation could avoid the coverage of active sites. According to Density functional theory (DFT) calculations, the electron transfer from AgCoO2 to Co3O4 promote electron donation ability of Co3O4 layer, benefiting for oxygen activation. Moreover, the longer Co-C and C-O bond length suggest the weakened chemisorption strength and higher active of CO molecule. The Ag modified Co3O4 exhibited more satisfactory activity at lower temperature. Typically, it realized 100% CO conversion at 90 °C, and displayed 6.3-fold higher reaction rate than pristine Co3O4 at 40 °C. Moreover, the Ag0.02Co exhibited outstanding long-term stability and water resistance. In summary, the optimized oxygen activation, CO chemisorption and interfacial electron transfer synergistically boosted the CO oxidation activity on Ag modified Co3O4.

Robust 2 nm-sized gold nanoclusters on Co3O4 for CO oxidation

In this study, gold nanoparticles were dispersed on Co3O4 nanoplates, forming a specific Au-Co3O4 interface. Upon calcination at 300 °C in air, aberration-corrected STEM images evidenced that the gold nanoclusters (NCs) on Co3O4{111} were maintained at ca. 2.2 nm, which is similar to the size of the parent Au colloidal particles, demonstrating the stronger metal-support interaction (SMSI) on Co3O4{111}. Au/Co3O4{111} showed good catalytic activity (a full CO conversion achieved at 80 °C) and durability (over 10 hours) in CO oxidation, which was mainly due to the promotion by the surface oxygen vacancies and intrinsic defects of Co3O4{111} for activating O2 and by Au0, Auδ+, and Au+ species on the surface of gold NCs for CO activation, as evidenced by Raman and Fourier-transform infrared (FT-IR) spectroscopy analysis. Au/Co3O4 catalyzed CO oxidation obeyed the Langmuir-Hinshelwood mechanism at low temperatures.

Dynamic Metal Nanoclusters: A Review on Accurate Crystal Structures

Dynamic metal nanoclusters have garnered widespread attention due to their unique properties and potential applications in various fields. Researchers have been dedicated to developing new synthesis methods and strategies to control the morphologies, compositions, and structures of metal nanoclusters. Through optimized synthesis methods, it is possible to prepare clusters with precise sizes and shapes, providing a solid foundation for subsequent research. Accurate determination of their crystal structures is crucial for understanding their behavior and designing custom functional materials. Dynamic metal nanoclusters also demonstrate potential applications in catalysis and optoelectronics. By manipulating the sizes, compositions, and surface structures of the clusters, efficient catalysts and optoelectronic materials can be designed and synthesized for various chemical reactions and energy conversion processes. This review summarizes the research progress in the synthesis methods, crystal structure characterization, and potential applications of dynamic metal nanoclusters. Various nanoclusters composed of different metal elements are introduced, and their potential applications in catalysis, optics, electronics, and energy storage are discussed. Additionally, the important role of dynamic metal nanoclusters in materials science and nanotechnology is explored, along with an overview of the future directions and challenges in this field.

CuCeOx/CuO Catalyst Derived from the Layered Double Hydroxide Precursor: Catalytic Performance in NO Reduction with CO in the Presence of Water and Oxygen

Valencies of metal species and lattice defects, such as oxygen vacancies, play a pivotal role in metal oxide-catalyzed reactions. Herein, we report a promising synthetic strategy for preparing CuO-supported CuCeO_x catalysts (CuCeO_x/CuO) by calcination of a hydrotalcite precursor [Cu₆Ce₂(OH)₁₆]CO₃·nH₂O. The structural and chemical properties of catalysts were characterized by XRD, ICP-AES, TEM, TPR, NH₃-TPD, XPS, Raman spectroscopy, and N₂ adsorption, which revealed that the thermal pretreatment in an oxidative atmosphere caused segregation and reconstitution processes of the precursor, resulting in a mesoporous catalyst consisting of well-dispersed CuO-supported CuCeO_x clusters of 1.8-3.2 nm in size with a high population of oxygen vacancies. The as-prepared catalyst shows excellent catalytic performance in the reduction of NO by CO in the absence as well as in the presence of water and oxygen. This behavior is attributed to its high oxygen defect concentration facilitating the interplay of the redox equilibria between Cu²⁺ and reduced copper species (Cu⁺/Cu⁰) and (Ce⁴⁺/Ce³⁺). The high surface population of oxygen vacancies and in situ-generated metallic copper species have been evidenced by Raman spectroscopy and X-ray photoelectron spectroscopy. The layered double hydroxide-derived CuCeO_x/CuO also showed good water tolerance and long-term stability. In situ infrared spectroscopy investigations indicated that adsorbed hyponitrite species are the main reaction intermediates of the NO conversion as also corroborated by theoretical simulations.

Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide

Parallel to CO₂ emission, NO_x emission has become one of the menacing problems that seek a simple, durable, and high-efficiency deNO_x catalyst. Herein, we demonstrated simple syntheses of platinum group metal nanoparticle-decorated f-BNNT (PGM = Pd, Pt, and Rh, and f-BNNT stands for -OH-functionalized boron nitride nanotubes) as a catalyst for efficient and selective reduction of NO by CO at low-temperature conditions. PGM/f-BNNT with a low amount of noble metal nanoparticles (0.7-0.8 wt %) presents very efficient catalytic activity for NO reduction as well as CO oxidation during their removal process. The removal efficiencies of NO and CO with Pd/f-BNNT, Pt/f-BNNT, and Rh/f-BNNT catalysts were investigated under various temperatures, flow rates, and reaction times, respectively. For most cases, NO catalytic reduction with CO reaction was >99% at a temperature as low as ∼200 °C. The catalyst robustness and efficiency were also verified by presenting almost 100% conversion of NO using a Rh/f-BNNT catalyst, which was aged under humid air at 600 and 700 °C for 24 h, respectively. The synergic effect of the catalytic efficacy of the well-dispersed noble metal nanoparticles and the excellent surface properties of BNNT are reasons for the high selectivity and catalytic property at a low temperature. On the basis of this investigation, we demonstrated that the noble metal nanoparticle-decorated f-BNNT catalysts are possible to save expensive PGM catalysts, such as Pt, Pd, and Rd, as much as 100 times while presenting similar or better catalytic performance for simultaneous NO and CO removals.

CuO decorated vacancy-rich CeO2 nanopencils for highly efficient catalytic NO reduction by CO at low temperature

With the rapid development of transportation and vehicles, the elimination of NO_x and CO has highly attracted public attention. In this work, vacancy-rich CeO₂ nanopencil supported CuO catalysts (CuO/CeO₂-NPC) were successfully prepared for NO reduction by CO. Importantly, CeO₂ with nanopencil-like shape (CeO₂-NPC) have been synthesis by solvothermal method for the first time. The physicochemical properties of all samples were studied in detail by combining the means of X-ray diffraction (XRD), Raman spectroscopy, electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS), H₂-temperature-programmed reduction (H₂-TPR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), N₂ physisorption (Brunauer-Emmett-Teller), and NO and CO temperature-programmed desorption (NO-TPD and CO-TPD) techniques. Compared with CeO₂ nanorods and nanoparticles supported CuO catalysts (CuO/CeO₂-NR and CuO/CeO₂-NP), the CuO/CeO₂-NPC catalysts showed the highest catalytic activity, affording more than 90% NO conversion at 69 °C as well as excellent H₂O tolerance at 150 °C, which is superior to catalysts previously reported. Characterization results indicated that the synergistic effect between the well-dispersed CuO and the CeO₂ nanopencil support enables a favorable electron transfer between these components and enhances the density of surface oxygen vacancies and Cu⁺ species, which consequently accelerating the redox cycle. The results indicated that the morphology control of CeO₂ support could be an efficient way to evidently enhance the catalytic performance for NO + CO reaction.

CeO2/Ni-MOF with Synergistic Function of Enrichment and Activation: Efficient Reduction of 4-Nitrophenol Pollutant to 4-Aminophenol

The conversion of organic pollutants to value-added chemicals has been considered as a sustainable approach to solve environmental problems. However, it is still a challenge to construct a suitable heterogeneous catalyst that can synchronously achieve the enrichment and activation of organic pollutants (such as 4-nitrophenol, 4-NP). Here, an organic-inorganic hybrid catalyst (CeO₂/Ni-MOF) was successfully fabricated for efficiently reducing 4-NP to 4-aminophenol (4-AP) with water as the hydrogen source. Based on the synergistic effect of Ni-MOF (adsorption action) and CeO₂ (active sites), CeO₂/Ni-MOF could achieve a reaction rate of 1.102 μmol min^-1 mg^-1 with an ultrahigh Faraday efficiency (FE) (99.9%) and conversion (97.6%). In addition, the catalytic mechanism of 4-NP reduction over CeO₂/Ni-MOF was elaborated in depth. This work presents a new avenue for the effective reduction of pollutants and provides a new strategy for designing high-performance catalysts for rare-earth metals.

New Strategies on Green Synthesis of Dimethyl Carbonate from Carbon Dioxide and Methanol over Oxide Composites

Dimethyl carbonate is a generally used chemical substance which is environmentally sustainable in nature and used in a range of industrial applications as intermediate. Although various methods, including methanol phosgenation, transesterification and oxidative carbonylation of methanol, have been developed for large-scale industrial production of DMC, they are expensive, unsafe and use noxious raw materials. Green production of DMC from CO2 and methanol is the most appropriate and eco-friendly method. Numerous catalysts were studied and tested in this regard. The issues of low yield and difficulty in tests have not been resolved fundamentally, which is caused by the inherent problems of the synthetic pathway and limitations imposed by thermodynamics. Electron-assisted activation of CO2 and membrane reactors which can separate products in real-time giving a maximum yield of DMC are also being used in the quest to find more effective production method. In this review paper, we deeply addressed green production methods of DMC using Zr/Ce/Cu-based nanocomposites as catalysts. Moreover, the relationship between the structure and activity of catalysts, catalytic mechanisms, molecular activation and active sites identification of catalysts are also discussed.

Facile Assembly of InVO4/TiO2 Heterojunction for Enhanced Photo-Oxidation of Benzyl Alcohol

In this work, an InVO₄/TiO₂ heterojunction composite catalyst was successfully synthesized through a facile hydrothermal method. The structural and optical characteristics of InVO₄/TiO₂ heterojunction composites are investigated using a variety of techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and spectroscopy techniques. The addition of InVO₄ to TiO₂ considerably enhanced the photocatalytic performance in selective photo-oxidation of benzyl alcohol (BA). The 10 wt% InVO_4/TiO₂ composite photocatalyst provided a decent 100% BA conversion with over 99% selectivity for benzaldehyde, and exhibited a maximum conversion rate of 3.03 mmol g⁻¹ h⁻¹, which is substantially higher than bare InVO₄ and TiO₂. The excellent catalytic activity of the InVO_4/TiO₂ photocatalyst is associated with the successful assembly of heterostructures, which promotes the charge separation and transfer between InVO₄ and TiO₂.

Fabrication of Stable Cu-Ce Catalyst with Active Interfacial Sites for NOx Elimination by Flame Spray Pyrolysis

The complete conversion of NOx to harmless N2 without N2O formation is crucial for the control of air pollution, especially at low temperatures. Cu-based catalysts are promising materials due to their low cost and high activity in NO dissociation, even comparable to noble metals; however, they suffer from low stability. Here, we established a Cu-Ce catalyst in one step with strong metal–support interaction by the flame spray pyrolysis (FSP) method. Almost 100% NO conversion was achieved at 100 °C, and they completely transferred into N2 at a low temperature (200 °C) for the FSP-CuCe catalyst, exhibiting excellent performance in NO reduction by CO reaction. Moreover, the catalytic performance can stay stable, while 23% NO conversion was lost in the same condition for the one made by the co-precipitation (CP) method. This can be attributed to the synergistic effect of abundant active interfacial sites and more flexible surface oxygen created during the FSP process. The flame technology developed here provides an efficient way to fabricate strong metal–support interactions, exhibiting notable potential in the design of stable Cu-based catalysts.