Water- and Acid-Sensitive Cu2O@Cu-MOF Nano Sustained-Release Capsules with Superior Antifouling Behaviors

Macrophage-Inspired marine antifouling coating with dynamic surfaces based on regulation of dynamic covalent bonds

Macrophages can kill bacteria and viruses by releasing free radicals, which provides a possible approach to construct antifouling coatings with dynamic surfaces that release free radicals if the breaking of dynamic covalent bonds is precisely regulated. Herein, inspired by the defensive behavior of macrophages of releasing free radicals to kill bacteria and viruses, a marine antifouling coating composed of polyurethane incorporating dimethylglyoxime (PUx-DMG) is prepared by precise regulation of dynamic oxime-urethane covalent bonds. The obtained alkyl radical (R·) derived from the cleavage of the oxime-urethane bonds manages to effectively suppress the attachment of marine biofouling. Moreover, the intrinsic dynamic surface makes it difficult for biofouling to adhere and ultimately achieves sustainable antifouling property. Notably, the PU50-DMG coating not only presents efficient antibacterial and antialgae properties, but also prevents macroorganisms from settling in the sea for up to 4 months. This provides a pioneer broad-spectrum strategy to explore the marine antifouling coatings.

Synergistic antibacterial effect and mechanism between Cu2O nanoparticles and quaternary ammonium salt in moisture-curable acrylic coatings

Combining with various antibacterial mechanisms is the preferred strategy to fabricate coatings with effective antibacterial performance. Herein, Cu2O nanoparticles and dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride, a kind of quaternary ammonium salt (QAS), were simultaneously incorporated into a moisture-curable acrylic resin in order to achieve both contact-killing and release-killing abilities for antibacterial coatings. The surface morphology, surface composition and basic properties of the coatings were thoroughly characterized. The antibacterial performance of the coatings was determined by in-vitro bacteriostatic test. Under the constant total mass fraction of antibacterial agents, both Cu2O and QAS content possessed the highest value on the coating surface at Cu2O/QAS mass ratio of 1:1, and correspondingly, the coatings reached sterilizing rate above 99 % against both E. coli and S. loihica, indicating the existence of synergistic effect between Cu2O and QAS. The synergistic antibacterial mechanism of the coatings involved two aspects. Firstly, the combination of contact-killing and release-killing biocides resulted in high bactericidal and antibiofilm activity against different bacteria. Further, the grafting of QAS molecules on the surface of Cu2O particles brought about the spontaneous migration of nanoparticles to the coating surface. The interaction between Cu2O and QAS also inhibited the phase separation of QAS and prolonged the release of Cu2+ at the same time. The coatings, therefore, exhibited stable antibacterial performance at varied service conditions.

Transformation of SBUs and Synergy of MOF Host-Guest in Single Crystalline State: Ingenious Strategies for Modulating Third-Order NLO Signals

Central metal exchange can innovatively open the cavity of metal-organic frameworks (MOFs) by alternating the framework topology. Here, the single-crystal-to-single-crystal (SC-SC) transformation is reported from a Co-based MOF {[Co1.25 (HL)0.5 (Pz-NH2 )0.25 (µ3 -O)0.25 (µ2 -OH)0.25 (H2 O)]·0.125 Co·0.125 L·10.25H2 O}n (Co-MOF, L = 5,5'-(1H-2,3,5-triazole-1,4-diyl)diisophthalic acid) into two novel MOF materials, {[Cu1.75 L0.75 (Pz-NH2 )0.125 (µ3 -O)0.125 (µ2 -OH)0.25 (H2 O)0.375 ]•3CH3 CN}n (Cu-MOF) and {[Zn1.75 L0.625 (Pz-NH2 )0.25 (µ3 -O)0.25 (µ2 -O)0.25 (H2 O)1.25 ]•4CH3 CN}n (Zn-MOF), through exchanging the Co2+ in the MOF into Cu2+ or Zn2+ , respectively. The free Co2+ and L4- in the Co-MOF channels fuse with the skeleton during the Co→Cu and Co→Zn exchange processes, leading to the expansion of the channel space and the transformation of the secondary building units (SBUs) to form an adjustable skeleton. The nonlinear optical response results show that the MOFs generated by the exchange of the central metal exhibit different saturable absorption and the self-focusing effect. In addition, loading polypyrrole (PPy) into the MOFs can not only improve the stability of the MOFs but also further optimize the nonlinear optical behavior. This work suggests that SC-SC central metal exchange and the introduction of polymer molecules can tune the nonlinear optical response, which provides a new perspective for the future study of nonlinear optical materials.

Ultrafast and Scalable Fabrication of Coordination Polymer Films on Network Substrates via Thermal Current-Induced Dewetting

Coordination polymers are among the most favored active materials by researchers due to their broad application prospects. However, most of them are usually difficult to directly process into applicable devices because of their unsatisfied processability. One process of great concern for researchers is the in situ preparation of the coordination polymer on the applicable substrate, especially for the favored network substrates with good mechanical properties and 3D porous structure, which could provide obvious convenience and facilitation in the application process. Herein, we present an ultrafast and scalable thermal current-induced dewetting strategy to obtain uniform coordination polymer film in situ on network substrates, which could enable unprecedented convenience to obtain directly usable coordination polymer composites such as practical catalytic electrodes with excellent electrocatalytic performance. The proposed thermal current-induced dewetting method provides a highly adaptable and efficient practical production approach to integrate coordination polymer materials with network substrates and also provides new inspiration for understanding and applying the dewetting process on complex 3D network substrates.

A marine coating: Self-healing, stable release of Cu2+, anti-biofouling

We developed a marine coating consisting of Cu-MOF-74, multi-walled carbon nanotube containing carboxyl groups (MWCNT-COOH) and self-healing polymers, which simultaneously possesses self-healing and anti-biofouling properties. Cu-MOF-74 can stably release Cu2+ by virtue of the coordination dissociative mechanism. Studies have proved that MWCNT can inhibit the growth of bacteria, so adding the MWCNT can help to reduce the amount of the copper ions and ensure the antibacterial effect of the coating. In addition, the cross-linked network and abundant -COOH provided by the polymers and MWCNT-COOH further prevent the loss of copper ions. Moreover, the coating we prepared has good performance of self-healing at room temperature or slightly heated because the polymers possess abundant non-covalent hydrogen bonds. Finally, the coating not only has superior antibacterial property, but also effectively prevents the adhesion of macrofouling organism. Therefore, the coating has a longer service life and its environmental friendliness has also been improved.

Self-Enhanced Antibacterial and Antifouling Behavior of Three-Dimensional Porous Cu2O Nanoparticles Functionalized by an Organic-Inorganic Hybrid Matrix

Cu2O is currently an important protective material for domestic engineering and equipment used to exploit marine resources. Cu+ is considered to have more effective antibacterial and antifouling activities than Cu2+. However, disproportionation of Cu+ in the natural environment leads to its reduced bioavailability and weakened reactivity. Novel and functionalized Cu2O composites could enable efficient and environmentally friendly applications of Cu+. To this end, a series of three-dimensional porous Cu2O nanoparticles (3DNP-Cu2O) functionalized by organic (redox gel, R-Gel)-inorganic (reduced graphene oxide, rGO) hybrids─3DNP-Cu2O/rGOx@R-Gel─at room temperature by immobilization-reduction method was prepared and applied for protection against marine biofouling. 3DNP-Cu2O/rGO1.76@R-Gel includes rGO and R-Gel shape 3D porous Cu2O nanoparticles with diameters ∼177 nm and strong dispersion and antioxidant stability. Compared with commercial Cu2O (Cu2O-0), 3DNP-Cu2O/rGO1.76@R-Gel exhibited an ∼50% higher bactericidal rate, ∼96.22% higher water content, and ∼75% lower adhesion of mussels and barnacles. Moreover, 3DNP-Cu2O/rGOx@R-Gel maintains the same excellent, stable, and long-lasting bactericidal performance as Cu2O-0@R-Gel while reducing the average copper ion release concentration by ∼56 to 76%. This was also confirmed by X-ray diffraction, X-ray photoelectric spectroscopy (XPS), atomic absorption spectroscopy, and antifouling tests. In addition, XPS tests of rGO-Cu2+ and R-Gel-Cu2+, photocurrent tests of 3DNP-Cu2O/rGO1.76@R-Gel, and energy-dispersive spectrometry pictures of bacteria confirm that R-Gel and rGO act as electron donors and transfer substrates driving the reduction of Cu2+ (Cu2+ → Cu+) and the diffusion of Cu+. Thus, a self-growing antibacterial and antifouling system of 3DNP-Cu2O/rGO1.76@R-Gel was achieved. The mechanism of accelerated bacterial inactivation and resistance to mussel and barnacle adhesion by 3DNP-Cu2O/rGO1.76@R-Gel was interpreted. It is shown that rGO and R-Gel are important players in the antibacterial and antifouling system of 3DNP-Cu2O/rGO1.76@R-Gel.

Physicochemical and Antibacterial Evaluation of TiO2/CNT Mesoporous Nanomaterials Prepared by High-Pressure Hydrothermal Sol-Gel Method under an Ultrasonic Composite Environment

TiO₂ has attracted significant research interest, principally due to its nontoxicity, high stability, and abundance. Carbon-doped TiO₂ can improve light absorption efficiency. In order to prepare high-efficiency photocatalysts, carbon-doped composites were prepared by hydrothermal reaction in a high-pressure reactor, and then TiO₂/CNT mesoporous composites were prepared by the sol-gel method in an ultrasonic environment. Characterized by SEM and TEM, the composite materials contained TiO₂ nanoparticles as well as CNT. After phase analysis, it was the anatase-doped phase. The following infrared light absorption performance and Escherichia coli bactericidal performance tests showed that it had better infrared and visible light absorption performance than pure TiO₂. The TiO₂/CNT mesoporous nanomaterials synthesized in this work are possible for clean industrial productions.

Improvement of Antibacterial and Antifouling Properties of a Cellulose Acetate Membrane by Surface Grafting Quaternary Ammonium Salt

Through etherification reaction, epoxy propyl dimethyl dodecyl ammonium chloride (EPDMDAC) was grafted onto the surface of a cellulose acetate (CA) membrane to prepare a stable nonleaching antibacterial antifouling membrane (QCA-X). The results showed that with the extension of grafting reaction time, the quaternary ammonium salt groups on the membrane surface increased and the hydrophilicity was enhanced. Compared with those of the CA membrane, the filtration capacity and antifouling performance of the QCA-X membrane are improved. When the grafting time is 4 h, the water permeability and flux recovery rate of the QCA-4 membrane are increased by 139 and 21.5%, respectively. The QCA-X membrane showed excellent antibacterial performance, and the sterilization rate against S. aureus and E. coli was more than 99.99%. After four repeated antibacterial cycles, the bactericidal rates against S. aureus and E. coli were maintained at about 99.69 ± 0.02 and 99.98 ± 0.02%, respectively, with good antibacterial persistence. Moreover, the QCA-X membrane can effectively inhibit bacterial adhesion. Mild and simple EPDMDAC grafting modifications improve the antibacterial, antifouling, and antibioadhesion properties of the CA membrane, showing its application potential in long-term water treatment, especially in biofouling water treatment.