Synergistic Effect of Au-PdO Modified Cu-Doped K2W4O13 Nanowires for Dual Selectivity High Performance Gas Sensing

W18O49 Nanofibers Functionalized with Graphene as a Selective Sensing of NO2 Gas at Room Temperature

Recent trends in two-dimensional (2D) graphene have demonstrated significant potential for gas-sensing applications with significantly enhanced sensitivity even at room temperature. Herein, this study presents fabrication of distinctive gas sensor based on one-dimensional (1D) W18O49 nanofibers decorated 2D graphene, specifically coated on copper (Cu)-based interdigitated electrodes formed by DC sputtering, which can selectively detect NO2 gas at room temperature. The sensor device fabricated using W18O49/Gr1.5% (i.e., W18O49 nanofibers hybrid nanocomposite with 1.5 wt % graphene) displays excellent overall sensing performance at 27 °C (room temperature) with high response (∼150-160 times) to NO2 gas. The W18O49/Gr1.5%-based sensor device reflects the highly selective detection toward NO2 gas among various gases with quick response time of 3 s and speedy recovery in 6 s. The limit of detection of ∼0.3 ppm with excellent reproducibility and stability for 3 months in all weather conditions (tested in humidity conditions 20-97%) are superior features of the device under test. However, W18O49/Gr3% displayed higher selectivity for NO2 but resulted with comparatively reduced sensitivity than W18O49/Gr1.5% sensor. The enhanced sensing performance could be attributed to the graphene content to decorate the nanofibers on it, oxygen vacancies/defects, and the contacts between the sensing material and Cu. This favorable synthesis and properties of self-assembled hybrid composite materials provide a potential utilization for detecting NO2 gas in environmental safety inspection.

Synergistic sensitization effects of single-atom gold and cerium dopants on mesoporous SnO2 nanospheres for enhanced volatile sulfur compound sensing

The real-time monitoring of volatile sulfur compounds is indispensable; however, it continues to pose a significant challenge due to issues such as limited performance towards parts-per-billion (ppb)-level gas. Herein, a concept of synergistic sensitization effects involving single-atom gold (Au) and cerium (Ce) dopants is proposed to boost the sensing performance of allyl mercaptan, a common volatile sulfur compound. As a proof-of-concept, a chemiresistive gas sensor based on mesoporous SnO2 nanospheres with single-atom Au decoration and Ce dopant (denoted Au/Ce-SnO2) is successfully synthesized. The synthesis of Au/Ce-SnO2 is achieved through the utilization of a self-template strategy, employing metal-phenolic hybrids as a precursor. The obtained materials exhibit high specific surface area (89.4 m2 g-1), and small particle size (∼86 nm). The gas sensor reveals unprecedented sensitivity (0.097 ppb-1) and ultra-low detection limit (0.74 ppb), surpassing all state-of-the-art allyl mercaptan gas sensors. Furthermore, a wireless gas sensor is constructed for highly selective and real-time monitoring of allyl mercaptan. The decoration of single-atom Au facilitates the adsorption and dissociation of oxygen and target gases. Simultaneously, the Ce dopant enhances the oxidation of allyl mercaptan. The sensing performance is boosted by the mesoporous framework of SnO2, as well as the synergistic sensitization effects resulting from single-atom Au decoration and Ce doping, thereby facilitating its potential application in environmental and health-related domains.

WO3 Nanoplates Decorated with Au and SnO2 Nanoparticles for Real-Time Detection of Foodborne Pathogens

Nowadays, metal oxide semiconductor gas sensors have diverse applications ranging from human health to smart agriculture with the development of Internet of Things (IoT) technologies. However, high operating temperatures and an unsatisfactory detection capability (high sensitivity, fast response/recovery speed, etc.) hinder their integration into the IoT. Herein, a ternary heterostructure was prepared by decorating WO3 nanoplates with Au and SnO2 nanoparticles through a facial photochemical deposition method. This was employed as a sensing material for 3-hydroxy-2-butanone (3H-2B), a biomarker of Listeria monocytogenes. These Au/SnO2-WO3 nanoplate-based sensors exhibited an excellent response (Ra/Rg = 662) to 25 ppm 3H-2B, which was 24 times higher than that of pure WO3 nanoplates at 140 °C. Moreover, the 3H-2B sensor showed an ultrafast response and recovery speed to 25 ppm 3H-2B as well as high selectivity. These excellent sensing performances could be attributed to the rich Au/SnO2-WO3 active interfaces and the excellent transport of carriers in nanoplates. Furthermore, a wireless portable gas sensor equipped with the Au/SnO2-WO3 nanoplates was assembled, which was tested using 3H-2B with known concentrations to study the possibilities of real-time gas monitoring in food quality and safety.

Enhanced Hot Electron Flow and Catalytic Synergy by Engineering Core-Shell Structures on Au-Pd Nanocatalysts

The synergistic catalytic performances of bimetallic catalysts are often attributed to the reaction mechanism associated with the alloying process of the catalytic metals. Chemically induced hot electron flux is strongly correlated with catalytic activity, and the interference between two metals at the atomic level can have a huge impact on the hot electron generation on the bimetallic catalysts. In this study, we investigate the correlation between catalytic synergy and hot electron chemistry driven by the electron coupling effect using a model system of Au-Pd bimetallic nanoparticles. We show that the bimetallic nanocatalysts exhibit enhanced catalytic activity under the hydrogen oxidation reaction compared with that of monometallic Pd nanocatalysts. Analysis of the hot electron flux generated in each system revealed the formation of Au/PdOx interfaces, resulting in high reactivity on the bimetallic catalyst. In further experiments with engineering the Au@Pd core-shell structures, we reveal that the hot electron flux, when the topmost surface Pd atoms were less affected by inner Au, due to the concrete shell, was smaller than the alloyed one. The alloyed bimetallic catalyst forming the metal-oxide interfaces has a more direct effect on the hot electron chemistry, as well as on the catalytic reactivity. The great significance of this study is in the confirmation that the change in the hot electron formation rate with the metal-oxide interfaces can be observed by shell engineering of nanocatalysts.

Phase-Dependent Dual Discrimination of MoSe2/MoO3 Composites Toward N,N-Dimethylformamide and Triethylamine at Room Temperature

Herein, we present, a chemiresistive-type gas sensor composed of two-dimensional 1T-2H phase MoSe2 and MoO3. Mixed phase MoSe2 and MoSe2/MoO3 composites were synthesized via a facile hydrothermal method. The structure analysis using X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy revealed the formation of different phases of MoSe2 at different temperatures. With increase in synthesis temperature from 180 to 200 °C, the relative percentage of 1T and 2H-MoSe2 phases changed from 80 to 48%. On the other hand, at 220 °C, 2H-MoSe2 was obtained as a major component. The gas sensing properties of individual MoSe2 and composites were investigated at room temperature toward various analytes. The obtained results revealed that composites possess improved sensing features as compared with individual MoSe2 or MoO3. Data also revealed that the composite with dominating 1T-phase exhibits relatively higher response (10%, at 10 ppm) for dimethylformamide (DMF) compared to triethylamine (TEA) (3%, at 10 ppm). In contrast, the composite with larger 2H-phase exhibited affinity toward TEA and had a relative response of about 2%. Therefore, selectivity of a sensor device can be tuned by an appropriately designed MoSe2/MoO3 composite. These results signify the importance of MoO3-based composites with dual-phase MoSe2 for successfully discriminating between DMF and TEA at room-temperature.

Pt-functionalized Amorphous RuOx as Excellent Stability and High-activity Catalysts for Low Temperature MEMS Sensors

The unsaturated coordination and abundant active sites endow amorphous metals with tremendous potential in improving metal oxide semiconductors' gas-sensing properties. However, the amorphous materials maintain the metastable status and easily transfer into the lower-active crystals during the gas-sensing process at high working temperatures, significantly limiting their further applications. Here, a bimetal amorphous PtRu catalyst is developed by accurately regulating the introduction of Pt species into amorphous RuOx supports to realize the highly active and stable H2 S gas-sensing detection. It is found that incorporation of low-concentration Pt species can effectively maintain the amorphous state of initial RuOx and delay the crystallization temperature as high as 100 °C. Further, ex situ XPS and in situ Raman spectroscopy analysis confirm that active Pt species can facilitate H2 S adsorption by strong Pt-S coordination and dissociate the sulfur species to the surrounding support, which contribute to the chemisorption and sensitization of H2 S. Meanwhile, electron transport at the interface between Pt, RuOx and ZnO further activates the reaction process at the surface of the gas-sensitive material. The final PtRu-modified ZnO (PtRu/ZnO) sensor enables the detection of H2 S in the ultra-low concentration range of 15-2000 ppb with remarkable stability.

Sub PPM Detection of NO2 Using Strontium Doped Bismuth Ferrite Nanostructures

The present work investigates the NO₂ sensing properties of acceptor-doped ferrite perovskite nanostructures. The Sr-doped BiFeO₃ nanostructures were synthesized by a salt precursor-based modified pechini method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The synthesized materials were drop coated to fabricate chemoresistive gas sensors, delivering a maximum sensitivity of 5.2 towards 2 ppm NO₂ at 260 °C. The recorded values of response and recovery time are 95 s and 280 s, respectively. The sensor based on Bi_0.8Sr_0.2FeO_3-δ (BSFO) that was operated was shown to have a LOD (limit of detection) as low as 200 ppb. The sensor proved to be promising for repeatability and selectivity measurements, indicating that the Sr doping Bismuth ferrite could be a potentially competitive material for sensing applications. A relevant gas-sensing mechanism is also proposed based on the surface adsorption and reaction behavior of the material.

Metal Oxide Semiconductor Sensors for Triethylamine Detection: Sensing Performance and Improvements

Triethylamine (TEA) is an organic compound that is commonly used in industries, but its volatile, inflammable, corrosive, and toxic nature leads to explosions and tissue damage. A sensitive, accurate, and in situ monitoring of TEA is of great significance to production safety and human health. Metal oxide semiconductors (MOSs) are widely used as gas sensors for volatile organic compounds due to their high bandgap and unique microstructure. This review aims to provide insights into the further development of MOSs by generalizing existing MOSs for TEA detection and measures to improve their sensing performance. This review starts by proposing the basic gas-sensing characteristics of the sensor and two typical TEA sensing mechanisms. Then, recent developments to improve the sensing performance of TEA sensors are summarized from different aspects, such as the optimization of material morphology, the incorporation of other materials (metal elements, conducting polymers, etc.), the development of new materials (graphene, TMDs, etc.), the application of advanced fabrication devices, and the introduction of external stimulation. Finally, this review concludes with prospects for using the aforementioned methods in the fabrication of high-performance TEA gas sensors, as well as highlighting the significance and research challenges in this emerging field.