Janus-Type Hydroxyapatite-Incorporated Kevlar Aerogel@Kevlar Aerogel Supported Phase-Change Material Gel toward Wearable Personal Thermal Management

Organic Thermoelectric Materials for Wearable Electronic Devices

Wearable electronic devices have emerged as a pivotal technology in healthcare and artificial intelligence robots. Among the materials that are employed in wearable electronic devices, organic thermoelectric materials possess great application potential due to their advantages such as flexibility, easy processing ability, no working noise, being self-powered, applicable in a wide range of scenarios, etc. However, compared with classic conductive materials and inorganic thermoelectric materials, the research on organic thermoelectric materials is still insufficient. In order to improve our understanding of the potential of organic thermoelectric materials in wearable electronic devices, this paper reviews the types of organic thermoelectric materials and composites, their assembly strategies, and their potential applications in wearable electronic devices. This review aims to guide new researchers and offer strategic insights into wearable electronic device development.

Woven Agarose-Cellulose Composite Aerogel Fibers with Outstanding Radial Elasticity for Personal Thermal Management

Aerogel fibers are good thermal insulators, suitable for weaving, and show potential as the next generation of intelligent textiles that can effectively reduce heat consumption for personal thermal management. However, the production of continuous aerogel fibers from biomass with sufficient strength and radial elasticity remains a significant challenge. Herein, continuous gel fibers were produced via wet spinning using agarose (AG) as the matrix, 2,2,2,6,6-tetramethylpiperidine-1-oxyl radical-oxidized cellulose nanofibers (TOCNs) as the reinforcing agent, and no other chemical additives by utilizing the gelling properties of AG. Supercritical drying and chemical vapor deposition (CVD) were then used to produce hydrophobic AG-TOCN aerogel fibers (HATAFs). During CVD, the HATAF gel skeleton was covered with an isostructural silica coating. Consequently, the HATAFs can recover from radial compression under 60% strain. Moreover, the HATAFs have low densities (≤0.14 g cm-3), high porosities (≥91.8%), high specific surface areas (≥188 m2 g-1), moderate tensile strengths (≤1.75 MPa), excellent hydrophobicity (water contact angles of >130°), and good thermal insulating properties at different temperatures. Thus, HATAFs are expected to become a new generation of materials for efficient personal thermal management.

Wearable Aerogels for Personal Thermal Management and Smart Devices

Extreme climates have become frequent nowadays, causing increased heat stress in human daily life. Personal thermal management (PTM), a technology that controls the human body's microenvironment, has become a promising strategy to address heat stress. While effective in ordinary environments, traditional high-performance fibers, such as ultrafine, porous, highly thermally conductive, and phase change materials, fall short when dealing with harsh conditions or large temperature fluctuations. Aerogels, a third-generation superinsulation material, have garnered extensive attention among researchers for their thermal management applications in building energy conservation, transportation, and aerospace, attributed to their extremely low densities and thermal conductivity. While aerogels have historically faced challenges related to weak mechanical strength and limited secondary processing capacity, recent advancements have witnessed notable progress in the development of wearable aerogels for PTM. This progress underscores their potential applications within extremely harsh environments, serving as self-powered smart devices and sensors. This Review offers a timely overview of wearable aerogels and their PTM applications with a particular focus on their wearability and suitability. Finally, the discussion classifies five types of PTM applications based on aerogel function: thermal insulation, heating, cooling, adaptive regulation (involving thermal insulation, heating, and cooling), and utilization of aerogels as wearable smart devices.

Personal Thermal Management by Radiative Cooling and Heating

Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being. By merely broadening the set-point of indoor temperatures, we could significantly slash energy usage in building heating, ventilation, and air-conditioning systems. In recent years, there has been a surge in advancements in personal thermal management (PTM), aiming to regulate heat and moisture transfer within our immediate surroundings, clothing, and skin. The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering. An emerging research area in PTM is personal radiative thermal management (PRTM), which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation. However, it is less taken into account in traditional textiles, and there currently lies a gap in our knowledge and understanding of PRTM. In this review, we aim to present a thorough analysis of advanced textile materials and technologies for PRTM. Specifically, we will introduce and discuss the underlying radiation heat transfer mechanisms, fabrication methods of textiles, and various indoor/outdoor applications in light of their different regulation functionalities, including radiative cooling, radiative heating, and dual-mode thermoregulation. Furthermore, we will shine a light on the current hurdles, propose potential strategies, and delve into future technology trends for PRTM with an emphasis on functionalities and applications.

Reduced Graphene Oxide/Cellulose Sodium Aerogel-Supported Eutectic Phase Change Material Gel Demonstrating Superior Energy Conversion and Storage Capacity toward High-Performance Personal Thermal Management

By virtue of their capacity to absorb and release energy during the phase change process, phase change materials (PCMs) are ideal for personal thermal management (PTM). The combination of reduced graphene oxide/cellulose sodium aerogel (rGCA) and lauric acid/myristic acid binary eutectic phase change gel (LMG) creates a composite phase change material that possesses outstanding photothermal conversion capabilities, electro-thermal conversion capabilities, energy storage capabilities, and shape-stable performance. The results showed that rGCA had a maximum adsorption efficiency of 99.7% with a melting latent heat of 124.6 J g-1. The high absorption rate of rGCA to LMG is a result of the capillary force, pore characteristics, hydrogen bonding, and the π-π interaction. Notably, rGCA and LMG composite material (rGCG) exhibited an excellent photothermal conversion efficiency of 96.5% and electro-thermal conversion of 82.3%. Results indicate that binary eutectic phase change materials are more suitable for temperature regulation than single phase change materials, making them more suitable for PTM. It is anticipated that the innovative thermal comfort solution, which provides thermal shielding, thermal energy storage, self-supporting characteristics, and wearability, will offer new possibilities for the next generation of wearable PTMs.

Dual-asymmetrically selective interfaces-enhanced poly(lactic acid)-based nanofabric with sweat management and switchable radiative cooling and thermal insulation

All-weather personal thermal regulation has far been challenged by variable environments especially the regulatory failure caused by highly-dense solar radiation, low environmental radiation and the fluctuated epidermal moisture in different seasons. Herein, from the design of interface selectivity, dual-asymmetrically optical and wetting selective polylactic acid-based (PLA) Janus-type nanofabric is proposed to achieve on-demand radiative cooling and heating as well as sweat transportation. Hollow TiO₂ particles are introduced in PLA nanofabric causing high interface scattering (∼99%) and infrared emission (∼91.2%) as well as surface hydrophobicity (CA > 140°). The strictly optical and wetting selectivity help achieve ∼12.8℃ of net cooling effect under > 1500 W/m² of solar power and ∼5℃ of cooling advantage higher than cotton fabric and sweat resistance simultaneously. Contrarily, the semi-embedded Ag nanowires (AgNWs) with high conductivity (0.245 Ω/sq) endows the nanofabric with visible water permeability and excellent interface reflection for thermal radiation from body (>65%) thus causing ∼7℃ of thermal shielding. Through simple interface flipping, synergistical cooling-sweat reducing and warming-sweat resisting can be achieved to satisfy the thermal regulation in all weather. Compared with conventional fabrics, multi-functional Janus-type passive personal thermal management nanofabrics would be of great significance to achieve the personal health maintenance and energy sustainability.

Nanopolyhybrids: Materials, Engineering Designs, and Advances in Thermal Management

The fundamental requirements for thermal comfort along with the unbalanced growth in the energy demand and consumption worldwide have triggered the development and innovation of advanced materials for high thermal-management capabilities. However, continuous development remains a significant challenge in designing thermally robust materials for the efficient thermal management of industrial devices and manufacturing technologies. The notable achievements thus far in nanopolyhybrid design technologies include multiresponsive energy harvesting/conversion (e.g., light, magnetic, and electric), thermoregulation (including microclimate), energy saving in construction, as well as the miniaturization, integration, and intelligentization of electronic systems. These are achieved by integrating nanomaterials and polymers with desired engineering strategies. Herein, fundamental design approaches that consider diverse nanomaterials and the properties of nanopolyhybrids are introduced, and the emerging applications of hybrid composites such as personal and electronic thermal management and advanced medical applications are highlighted. Finally, current challenges and outlook for future trends and prospects are summarized to develop nanopolyhybrid materials.

Mechanically Switchable Multifunctional Device for Regulating Passive Radiative Cooling and Solar Heating

Energy consumption during cooling and heating poses a great threat to the development of society. Thermal regulation, as switchable cooling and heating in a single platform, is therefore urgently demanded. Herein, a switchable multifunctional device integrating heating, cooling, and latent energy storage was proposed for temperature regulation and window energy saving for buildings. A radiative cooling (RC) emitter, a phase-change (PC) membrane, and a solar-heating (SH) film were connected layer by layer to form a sandwich structure. The RC emitter exhibited selective infrared emission (emissivity in the atmospheric window: 0.81, emissivity outside the atmospheric window: 0.39) and a high solar reflectance (0.92). Meanwhile, the SH film had a high solar absorptivity (0.90). More importantly, both the RC emitter and the SH film displayed excellent wear resistance and UV resistance. The PC layer can control the temperature at a steady state under dynamic weather conditions, which could be verified by indoor and outdoor measurements. The thermal regulation performance of the multifunctional device was also verified by outdoor measurements. The temperature difference between the RC and SH models of the multifunctional device could reach up to 25 °C. The as-constructed switchable multifunctional device is a promising candidate for alleviating the cooling and heating energy consumption and realizing energy saving for windows.

A Thermoregulatory Flexible Phase Change Nonwoven for All-Season High-Efficiency Wearable Thermal Management

Phase change materials have a key role for wearable thermal management, but suffer from poor water vapor permeability, low enthalpy value and weak shape stability caused by liquid phase leakage and intrinsic rigidity of solid-liquid phase change materials. Herein, we report for the first time a versatile strategy for designed assembly of high-enthalpy flexible phase change nonwovens (GB-PCN) by wet-spinning hybrid graphene-boron nitride (GB) fiber and subsequent impregnating paraffins (e.g., eicosane, octadecane). As a result, our GB-PCN exhibited an unprecedented enthalpy value of 206.0 J g-1, excellent thermal reliability and anti-leakage capacity, superb thermal cycling ability of 97.6% after 1000 cycles, and ultrahigh water vapor permeability (close to the cotton), outperforming the reported PCM films and fibers to date. Notably, the wearable thermal management systems based on GB-PCN for both clothing and face mask were demonstrated, which can maintain the human body at a comfortable temperature range for a significantly long time. Therefore, our results demonstrate huge potential of GB-PCN for human-wearable passive thermal management in real scenarios.

Bio-Inspired Aramid Fibers@silica Binary Synergistic Aerogels with High Thermal Insulation and Fire-Retardant Performance

Flame-retardant, thermal insulation, mechanically robust, and comprehensive protection against extreme environmental threats aerogels are highly desirable for protective equipment. Herein, inspired by the core (organic)-shell (inorganic) structure of lobster antenna, fire-retardant and mechanically robust aramid fibers@silica nanocomposite aerogels with core-shell structures are fabricated via the sol-gel-film transformation and chemical vapor deposition process. The thickness of silica coating can be well-defined and controlled by the CVD time. Aramid fibers@silica nanocomposite aerogels show high heat resistance (530 °C), low thermal conductivity of 0.030 W·m^-1·K^-1, high tensile strength of 7.5 MPa and good flexibility. More importantly, aramid fibers@silica aerogels have high flame retardancy with limiting oxygen index 36.5. In addition, this material fabricated by the simple preparation process is believed to have potential application value in the field of aerospace or high-temperature thermal protection.

Leakage-Proof Flexible Phase Change Gels with Salient Thermal Conductivity for Efficient Thermal Management

Phase change materials (PCMs) as one of the most potential latent heat storage techniques have been widely used for thermal management and energy storage. However, simultaneously imparting flexibility, high thermal conductivity, and considerable energy storage density to organic PCMs remains challenging. In this work, a coupling strategy combining substance exchange and magnetic orientation has been proposed to fabricate phase change gels (PCGs) with thermally induced flexibility and high through-plane thermal conductivity. In the PCGs, synthesized boron nitride/ferroferric oxide (BN@Fe₃O₄) particles and polyacrylic acid (PAA) precursor liquid are introduced to polyethylene glycol (PEG) aqueous solution, and a magnetic field is applied in the process of PAA network construction to promote ordered arrangement of BN@Fe₃O₄ along the direction of the magnetic field. Consequently, PEG is wrapped by the cross-linked PAA supporting network, forming PCGs with excellent shape stability and thermally induced flexibility. The vertical orientation structure of BN@Fe₃O₄ endows the PCGs with an enhanced through-plane thermal conductivity of up to 1.07 W m^-1 K^-1 at a BN@Fe₃O₄ loading of 25.6 wt % with an additional enhancement of 215% compared to the composite without BN. The thermally conductive leakage-proof PCGs present great application potential in heat storage and management.

Tunable Thermoresponsive Flexible Films for Adaptive Temperature Management and Visual Temperature Monitoring

Effective temperature management is essential for human thermal comfort and health. Although various temperature regulation materials have been proposed previously, there are few materials that have the dual functions of temperature monitoring and thermal management. Herein, a thermoresponsive form-stable flexible film based on phase-change materials (PCMs) and polydimethylsiloxane (PDMS) is rationally designed. The resultant versatile PCM@PDMS film is able to absorb and release heat responding to temperature stimuli and good mechanical strength. Moreover, optical visibility of the PCM@PDMS film can be reversibly converted between opaque and transparent states to monitor temperature. The switching principle is that solid PCMs embedded in the PDMS would be melted into liquid PCMs to enable light through the PCM@PDMS. The thermal experiment results suggest that the PCM@PDMS films can effectively regulate the human body temperature to adapt to the demanding environment (self-heating more than 3 °C in the cold environment or self-cooling more than 4 °C in the hot environment). Such dual-function films open a pathway to develop smart personalized thermoregulation materials for human body thermal management and temperature monitoring.