Yb3+-Doped Two-Dimensional Upconverting Tb-MOF Nanosheets with Luminescence Sensing Properties

An electrochemiluminescence sensor based on lanthanide bimetallic MOFs with a "cascade sensitization mechanism" for the sensitive detection of CA242

Lanthanide metal-organic frameworks (Ln-MOFs) broaden the optical sensing applications of lanthanide ions due to the antenna effect between organic ligands and metals. However, the sensitization ability of the ligand to metal ions is limited, and maximizing the sensitization of the electrochemiluminescence behavior of Eu3+ is still a challenge for the application of Ln-MOFs. Therefore, under the guidance of the "cascade sensitization mechanism" based on the antenna effect sensitizing the electrochemiluminescence of bimetallic Ln-MOFs, we proposed Eu/Tb-MOFs with high luminescence intensity as a signal probe. According to the antenna effect, the conjugated structure and high extinction coefficient of the benzene ring of 2-amino terephthalic acid (NH2-BDC) can enhance the ECL luminescence intensity of Eu/Tb-MOFs. Tb3+ can act as an energy bridge between NH2-BDC and Eu3+, buffering the energy gap. The bimetallic sensitization is formed between Tb3+ and Eu3+, which can inhibit the reverse internal flow of energy and ensure the high luminous efficiency of Eu3+. In addition, the nanosphere mixed valence Fe3O4 as a co-reactant accelerator promotes the formation of transient free radical SO4•- through the valence change of Fe2+/Fe3+. The ECL immunosensor constructed by luminophores Eu/Tb-MOFs and nanosphere Fe3O4 provided a new explanation for the ECL self-luminous of Eu/Tb-MOFs.

Metal-organic framework integrated hydrogel bioreactor for smart detection of metal ions

Bioreactors with environment responsiveness for smart detection has attracted widespread interest. Bioreactors that operate in liquid have excellent reaction speed and sensitivity, and those that operate at a solid interface have unique portability and stability. However, bioreactors that can simultaneously take advantage of both properties are still limited. Here, we developed a metal-organic framework (MOF) integrated hydrogel bioreactor that can accommodate both solid and liquid properties by using a hydrogel as a quasi-liquid medium. To enhance the stability and intelligence of the hydrogel bioreactor, we have opted for the utilization of europium metal-organic framework (Eu-MOF) as the optical output to withstand long-term storage challenges, and DNA as the highly programmable substance for intelligent target response. On this basis, smart detection of metal ions and biological micro-molecules have been achieved. Notably, this quasi-liquid hydrogel bioreactor has effectively tackled the intrinsic issues of inadequate dispersion stability of Eu-MOF in liquid systems and poor stability of DNA against environmental interference. Moreover, this MOF integrated hydrogel bioreactor has been applied to the construction of a portable hydrogel bioreactor, which enables platform-free and arrayed target detection via a smartphone, providing a new perspective for further promoting the application of quasi-liquid hydrogel bioreactors and intelligent nanobiological sensors.

Rational designed Fe-ZIFs@CoP nanoplatforms for photothermal-enhanced ROS-mediated tumor therapy

Metal-organic frameworks (MOFs), with biocompatible and bio-friendly properties, exhibit intriguing potential for the drug delivery system and imaging-guided synergistic cancer theranostics. Even though tremendous attention has been attracted on MOFs-based therapeutics, which play a crucial role in therapeutic drugs, gene, and biomedical agents delivery of cancer therapy, they are often explored as simple nanocarriers without further "intelligent" functions. Herein, Fe-doped MOFs with CoP nanoparticles loading were rationally designed and synthesized for photothermal enhanced reactive oxygen species (ROS)-mediated treatment. Fe-ZIFs@CoP could generate efficient ROS through the Fenton reaction while depleting glutathione for amplifying oxidative stress. Particularly, due to the photothermal effect of Fe-ZIFs@CoP, the hyperthermia generated by as-synthesized Fe-ZIFs@CoP facilitated the advanced performance of the Fenton effect for a high amount of ROS generation. The promising "all-in-one" synergistic MOFs platform herein reported provides some prospects for future directions in this area.

Recent advances in metal-organic frameworks: Synthesis, application and toxicity

Metal-organic frameworks (MOFs) are a new class of crystalline porous hybrid materials with high porosity, large specific surface area and adjustable channel structure and biocompatibility, which are being investigated with increasing interest for energy storage and conversion, gas adsorption/separation, catalysis, sensing and biomedicine. However, the practical applications of MOFs make them release into the environment inevitable, posing a threat to humans and organisms. In this article, we cover advances in the currently available MOFs synthesis methods and the emerging applications of MOFs, especially in the biomedical field (therapeutic agents and bioimaging). Additionally, after evaluating the current status of main exposure routes and affecting factors in the field of MOFs-toxicity, the molecular mechanism is also clarified and identified. Knowledge gaps are identified from such a summarization and frontier development are explored for MOFs. Afterwards, we also present the limitations, challenges, and future perspectives in the study of the entire life cycle of MOFs. This review emphasizes the need for a more targeted discussion of the latest, widely used and effective versatile material class in order to exploit the full potential of high-performance and non-toxicity MOFs in the future.

Er3+-Sensitized Upconversion/Down-Shifting Luminescence in Metal-Organic Frameworks

Photoluminescent metal-organic frameworks (MOFs) are used as optical materials with excellent properties, of which the lanthanide-doped MOFs are able to emit in a broad region from visible to near-infrared due to their unique 4f-orbital electronic structure. Herein, Er3+ and Y3+ ions are selected as the metal centers of the MOFs and Er3+ is used as a sensitizer to absorb 980 nm excitation light. At the same time, Er3+ ions also act as activators that emit upconverting visible light and down-shifting near-infrared light. In addition, Tm3+, Ho3+, and Eu3+ ions were individually doped into the Er3+-doped MOFs to investigate the variation of energy-transfer paths in the presence of different lanthanide activators. Finally, the pathway of energy transfer in these Er3+-sensitized luminescent-MOFs was summarized. This work provides new insights for further development of both upconversion and down-shifting luminescence of MOFs.

Smartphone-integrated ratiometric fluorescence sensing platform based on bimetallic metal-organic framework nanowires for anthrax biomarker detection

Developing an intelligent, sensitive, and visual strategy for quickly identifying anthrax biomarkers is crucial for ensuring food safety and preventing disease outbreaks. Herein, a smartphone-integrated ratiometric fluorescent sensing platform based on bimetallic metal-organic framework (Eux/Tb1-x-MOF) nanowires was designed for specific recognition of pyridine-2,6-dicarboxylic acid (DPA, anthrax biomarker). The Eux/Tb1-x-MOF was prepared by coordinating Eu3+ and Tb3+ with BBDC ligands, which exhibited a uniform fibrous morphology and dual-emission fluorescence at 543 and 614 nm. After the introduction of DPA, the red emission at 614 nm displayed obvious fluorescence quenching, while the green emission at 543 nm was gradually enhanced. The ratiometric sensing offered a wide linear equation in the range of 0.06-15 µg/mL and a low detection limit (LOD) of 20.69 ng/mL. Furthermore, a portable smartphone installing the color recognition application can achieve sensitive, real-time, and visual detection of DPA. As a simple and effective smartphone-assisted sensing platform, this work holds admirable promise to broaden the applications in biomarker real-time determinations and other fields.

Highly sensitive fluorescent quantification of carbendazim by two-dimensional Tb-MOF nanosheets for food safety

Carbendazim (CBZ), a well-known benzimidazole pesticide, is utilized in agriculture to prevent and cure plant diseases caused by fungi. Residual CBZ in food poses serious threat to human health. Herein, a fluorescent two-dimensional terbium-based metal-organic framework (2D Tb-MOF) nanosheet sensor was developed for the rapid and ultrasensitive detection of CBZ. The 2D Tb-MOF nanosheets, prepared with Tb³⁺ ions and 5-borono-1,3-benzenedicarboxylic acid (BBDC) as the precursors, exhibited excellent optical properties. Upon the addition of CBZ, the fluorescence of Tb-MOF nanosheets was quenched because of the inner filter effect (IFE) and dynamic quenching. The fluorescence sensor offered two linear ranges of 0.06-4 and 4-40 µg/mL with a low detection limit of 17.95 ng/mL. Furthermore, the proposed sensing platform was successfully applied to assay CBZ in apples and tea, and satisfactory results were obtained. This study provides an effective alternative strategy for the qualitative and quantitative determination of CBZ to ensure food safety.

Y3+@CdTe quantum dot nanoprobe as a fluorescence signal enhancement sensing platform for the visualization of norfloxacin

Quinolone antibiotics (norfloxacin) pose a serious threat to animal and human health due to their misuse and difficulty in being broken down in surface water and food. Rapid and effective detection of norfloxacin (NOR) is essential for environmental testing and ecosystems. In this study, yttrium was coordinated with mercaptopropionic acid (MPA)-modified CdTe quantum dots (QDs) to obtain a novel fluorescence sensor Y³⁺@CdTe QDs for the sensitive detection of NOR. NOR can bind to Y³⁺ to form a complex (NOR-Y³⁺). This complex enhances the luminescence of NOR and blue-shifts to 423 nm. The fluorescence intensity of NOR-Y³⁺ at 423 nm (I₄₂₃) gradually increased with increasing NOR concentration; meanwhile, the fluorescence intensity of CdTe QDs at 634 nm (I₆₃₄) gradually decreased due to aggregation induction. The ratio of I₄₂₃ to I₆₃₄ was used for the quantitative determination of NOR. The linear range of the constructed fluorescent probes was from 1.0 to 150.0 μM, with a detection limit of 31.8 nM. CdTe QDs act as a red fluorescent background, and with the addition of NOR, the color of the system transitions from red to purple and finally blue. This method was rapid (immediate) and visual, providing a simple analysis of various actual samples (tap water, lake water, honey, milk and human serum) for NOR.

Upconversion Luminescence through Cooperative and Energy-Transfer Mechanisms in Yb3+ -Metal-Organic Frameworks

Lanthanide-doped metal-organic frameworks (Ln-MOFs) have versatile luminescence properties, however it is challenging to achieve lanthanide-based upconversion luminescence in these materials. Here, 1,3,5-benzenetricarboxylic acid (BTC) and trivalent Yb³⁺ ions were used to generate crystalline Yb-BTC MOF 1D-microrods with upconversion luminescence under near infrared excitation via cooperative luminescence. Subsequently, the Yb-BTC MOFs were doped with a variety of different lanthanides to evaluate the potential for Yb³⁺ -based upconversion and energy transfer. Yb-BTC MOFs doped with Er³⁺ , Ho³⁺ , Tb³⁺ , and Eu³⁺ ions exhibit both the cooperative luminescence from Yb³⁺ and the characteristic emission bands of these ions under 980 nm irradiation. In contrast, only the 497 nm upconversion emission band from Yb³⁺ is observed in the MOFs doped with Tm³⁺ , Pr³⁺ , Sm³⁺ , and Dy³⁺ . The effects of different dopants on the efficiency of cooperative luminescence were established and will provide guidance for the exploitation of Ln-MOFs exhibiting upconversion.

Two Stable Cd-MOFs as Dual-Functional Materials with Luminescent Sensing of Antibiotics and Proton Conduction

Construction and investigation of dual-functional metal-organic frameworks (MOFs) with luminescent sensing and proton conduction provide widespread applications in clean energy and environmental monitoring fields. By selecting a phosphonic acid ligand 4-pyridyl-CH₂N(CH₂PO₃H₂)₂ (H₄L) and coligand 2,2'-biimidazole (H₂biim), two cadmium-based MOFs [Cd_1.5(HL)(H₂biim)_0.5] (1) and (H₄biim)_0.5·[Cd₂(L)(H₂biim)Cl] (2) with different structures and properties have been hydrothermally synthesized by controlling reaction temperature. Based on the excellent thermal and chemical stabilities, and good luminescent stabilities in water solution, 1 and 2 can serve as luminescent sensors of chloramphenicol (CAP) with different quenching constant (K_SV) values and detection limits (LODs) in water, simulated environmental system, and real fish water system. Meanwhile, different sensing effects and possible sensing mechanisms are analyzed in detail. Moreover, 1 and 2 can also serve as good proton-conducting materials. The proton conductivities can reach up to 1.41 × 10^-4 S cm^-1 for 1 and 1.02 × 10^-3 S cm^-1 for 2 at 368 K and 95% relative humidity (RH). Among them, 2 shows better luminescent sensing and proton conduction performance than 1, which indicates that different crystal structures have a great impact on the properties of MOFs. Through the discussion of the relationship between structures and properties in detail, the possible reasons for the differences in properties are obtained, which can provide theoretical guidance for the rational design of this kind of dual-functional MOFs in the future.

MIL-125-based nanocarrier decorated with Palladium complex for targeted drug delivery

The aim of this work was to provide a novel approach to designing and synthesizing a nanocomposite with significant biocompatibility, biodegradability, and stability in biological microenvironments. Hence, the porous ultra-low-density materials, metal–organic frameworks (MOFs), have been considered and the MIL-125(Ti) has been chosen due to its distinctive characteristics such as great biocompatibility and good biodegradability immobilized on the surface of the reduced graphene oxide (rGO). Based on the results, the presence of transition metal complexes next to the drug not only can reinforce the stability of the drug on the structure by preparing π–π interaction between ligands and the drug but also can enhance the efficiency of the drug by preventing the spontaneous release. The effect of utilizing transition metal complex beside drug (Doxorubicin (DOX)) on the drug loading, drug release, and antibacterial activity of prepared nanocomposites on the P. aeruginosa and S. aureus as a model bacterium has been investigated and the results revealed that this theory leads to increasing about 200% in antibacterial activity. In addition, uptake, the release of the drug, and relative cell viabilities (in vitro and in vivo) of prepared nanomaterials and biomaterials have been discussed. Based on collected data, the median size of prepared nanocomposites was 156.2 nm, and their biological stability in PBS and DMEM + 10% FBS was screened and revealed that after 2.880 min, the nanocomposite’s size reached 242.3 and 516 nm respectively. The MTT results demonstrated that immobilizing PdL beside DOX leads to an increase of more than 15% in the cell viability. It is noticeable that the AST:ALT result of prepared nanocomposite was under 1.5.

A Eu(iii) metal–organic framework based on anthracenyl and alkynyl conjugation as a fluorescence probe for the selective monitoring of Fe3+ and TNP

In this work, a luminescent metal–organic framework (Eu-MOF {[Eu₆L₆(μ₃-OH)₈(H₂O)₃]₈·H₂O}_n) was constructed by a solvothermal method with a linear organic ligand L (10-[(2-amino-4-carboxyl-phenyl)ethynyl]anthracene-9-carboxylic acid) based on anthracene and alkyne groups and using Eu³⁺ as the metal center. The MOF exhibits a stable UiO-66 crystal structure, and a six-core cluster twelve-linked secondary structural unit was successfully synthesized using 2-fluorobenzoic acid as a modulator, forming a classical fcu topology. Moreover, it exhibits good chemical stability. Interestingly, Eu-MOF exhibited high selectivity and sensitive fluorescence burst properties towards Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) in DMF solution. For Fe³⁺, the K_SV value is 5.06 × 10⁵ M⁻¹ and the LOD value is 5.1 × 10⁻⁷ M. For TNP, the K_SV value is 1.92 × 10⁴ M⁻¹ and the LOD value is 1.93 × 10⁻⁶ M. In addition, Eu-MOF showed good anti-interference ability and fast response. This work provides an excellent fluorescent sensor for the detection of Fe³⁺ and 2,4,6-trinitrophenol (TNP) residues in contaminants.

In this work, Eu-MOF has been synthesized and has excellent luminescence recognition ability for Fe³⁺ and TNP with good selectivity and high sensitivity via luminescence quenching.