Modulating the Carbonization Degree of Carbon Dots for Multicolor Afterglow Emission

Comprehensive Overview of Controlled Fabrication of Multifunctional Fluorescent Carbon Quantum Dots and Exploring Applications

In recent years, carbon dots (CDs) have garnered increasing attention due to their simple preparation methods, versatile performances, and wide-ranging applications. CDs can manifest various optical, physical, and chemical properties including quantum yield (QY), emission wavelength (Em), solid-state fluorescence (SSF), room-temperature phosphorescence (RTP), material-specific responsivity, pH sensitivity, anti-oxidation and oxidation, and biocompatibility. These properties can be effectively regulated through precise control of the CD preparation process, rendering them suitable for diverse applications. However, the lack of consideration given to the precise control of each feature of CDs during the preparation process poses a challenge in obtaining the requisite features for various applications. This paper is to analyze existing research and present novel concepts and ideas for creating CDs with different distinct features and applications. The synthesis methods of CDs are discussed in the first section, followed by a comprehensive overview of the important properties of CDs and the modification strategy. Subsequently, the application of CDs and their requisite properties are reviewed. Finally, the paper outlines the current challenges in controlling CDs properties and their applications, discusses potential solutions, and offers suggestions for future research.

Recent advances in fluorescence and afterglow of CDs in matrices

Carbon dots (CDs) are novel nanomaterials with dimensions less than 10 nm that have attracted much attention due to their outstanding optical properties. However, the development of solid-state fluorescence and afterglow methods has been relatively slow, although the properties of these materials under liquid conditions have been extensively studied. In recent years, embedding CDs in a matrix has been shown to prevent aggregation quenching and inhibit nonradiative transitions, thus realizing solid-state fluorescence and afterglow, which has greatly broadened the research and application areas of CDs. In terms of hydrogen bonding, ionic bonding, covalent bonding and spatial confinement, the interactions between CDs and matrices can effectively realize and improve the solid-state fluorescence and afterglow effects of CDs. Recent applications of CDs in matrices in optoelectronics, information security, sensing, biotherapeutics and imaging are also summarized. Finally, we summarize the challenges and developments of CDs in matrices.

Metal oxide hybridization enhances room temperature phosphorescence of carbon dots-SiO2 matrix for information encryption and anti-counterfeiting

Room temperature phosphorescent (RTP) carbon dot (CD) materials have been widely used in various fields, but it is difficult to achieve a long lifetime, high stability and easy synthesis. In particular, realizing the phosphorescence emission of CDs using a metal oxide (MO) matrix is a challenge. Here, solid gels are synthesized via in situ hydrolysis, and then RTP CDs are synthesized based on a SiO2 matrix (CDs@SiO2) and hybridized with a MO matrix (CDs@SiO2-MO) by high-temperature calcination. Among the materials synthesized, Al2O3 matrix RTP CDs (CDs@SiO2-Al2O3) have a long phosphorescence lifetime of 689 ms and can exhibit yellow-green light visible to the naked eye for 9 s after the UV light (365 nm) is turned off. Compared with the green phosphorescence of CDs@SiO2, the yellow-green phosphorescence lifetime of CDs@SiO2-Al2O3 is enhanced by 420 ms. In addition, CDs@SiO2-Al2O3 maintains good stability of phosphorescence emission in water, strongly oxidizing solutions and organic solvents. As a result, CDs@SiO2-Al2O3 can be applied to the field of information encryption and security anti-counterfeiting, and this work provides a new, easy and efficient synthesis method for MO as an RTP CD matrix.

The afterglow of carbon dots shining in inorganic matrices

Carbon dots (CDs) are a new type of quasi-spherical and zero-dimension carbon nanomaterial with a diameter less than 10 nm. They exhibit a broad absorption spanning from the ultraviolet (UV) to visible light regions and inspire growing interests due to their excellent performance. In recent years, it was identified that the CDs embedded in various inorganic matrices (IMs) can effectively activate afterglow emission by suppressing the nonradiative transitions of molecules and protecting the triplet excitons of CDs, which hold broad application prospects. Herein, recent advances in CDs@IMs are reviewed in detail, and the interaction and luminescence mechanisms between CDs and IMs are also summarized. We highlight the synthetic strategies of constructing composites and the roles of IMs in facilitating the applications of CDs in diverse areas. Finally, some directions and challenges of future research in this field are proposed.

Carbon Dots: From Synthesis to Unraveling the Fluorescence Mechanism

Carbon dots (CDs) being a new type of carbon-based nanomaterial have attracted intensive interest from researchers owing to their excellent biophysical properties. CDs are a class of fluorescent carbon nanomaterials that have emerged as a promising alternative to traditional quantum dots and organic dyes in applications including bioimaging, sensing, and optoelectronics. CDs possess unique optical properties, such as tunable emission, facile synthesis, and low toxicity, making them attractive for many applications in biology, medicine, and environmental areas. The synthesis of CDs is achievable by a variety of methods, including bottom-up and top-down approaches, involving the use of different carbon sources and surface functionalization strategies. However, understanding the fluorescence mechanism of CDs remains a challenge. Various mechanistic models have been proposed to explain their origin of luminescence. This review summarizes the recent developments in the synthesis and functionalization of CDs and provides an overview of the current understanding of the fluorescence mechanism.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Construction of composite films using carbon nanodots for blocking ultraviolet light from the Sun

Carbon nanodots (CNDs) which demonstrate concentration-dependent emission and have a photoluminescence quantum yield of 45% were designed. Transparent CND-containing composite films (CND-films), obtained by combining the CNDs with polyvinyl alcohol in different proportions, were shown to block the UV component of sunlight. Whereas the pure PVA film could not block UV light, the ability of CND-films to block UV light could be adjusted by altering the proportion of CNDs in the film. The larger the proportion of CNDs, the greater the extent of UV blocking. CND-film containing 32 wt% CNDs completely blocked UV light (≤400 nm) from sunlight, without affecting the transmission of visible light (>800 nm). The ability of the CND-films to block the UV component of sunlight was investigated using a commercially available UV-induced color change card, which confirmed that the capacity of the CND-films to block UV light could be adjusted by altering the proportion of CNDs in the film. This study shows that CNDs with concentration-dependent long wavelength emission characteristics can be used as optical barrier units for the preparation of materials to block high-energy short wavelength light.

Room Temperature Phosphorescence Carbon Dots: Preparations, Regulations, and Applications

Room temperature phosphorescence (RTP) materials have drawn considerable attention by virtue of their outstanding features. Compared with organometallic complexes and pure organic compounds, carbon dots (CDs) have emerged as a new type of RTP materials, which show great advantages, such as moderate reaction condition, low toxicity, low cost, and tunable optical properties. In this review, the important progress made in RTP CDs is summarized, with an emphasis on the latest developments. The synthetic strategies of RTP CDs will be comprehensively summarized, followed by detailed introduction of their performance regulation and potential applications in anti-counterfeiting, information encryption, sensing, light-emitting diodes, and biomedicine. Finally, the remaining major challenges for RTP CDs are discussed and new opportunities in the future are proposed.

Mechanical Force-Induced Color-Variable Luminescence of Carbon Dots in Boric Acid Matrix

Mechano-luminescent materials that exhibit distinct luminescence responses to force stimuli are urgently anticipated in view of application needs in the fields of sensing, anti-counterfeiting, optoelectronic devices, etc. However, most of the reported materials normally exhibit force-induced changes in luminescent intensity, whereas materials that possess force-induced color-variable luminescence remain rarely reported. Herein, for the first time, a novel mechanical force-induced color-variable luminescence material from carbon dots (CDs) in boric acid (CD@BA) is reported. At low CDs concentration, the luminescence of CD@BA exhibits a grinding-induced color variable from white to blue. This grinding-induced color variable can be switched to yellow-to-white changing by increasing the CDs concentration in BA. The grinding-induced color-variable luminescence originates from dynamic variation in emission ratio of fluorescence and room temperature phosphorescence, due to the influence of oxygen and water vapor in the air. At high CDs concentration, short-wavelength fluorescence undergoes more severe reabsorption compared to room temperature phosphorescence, leading to grinding-induced color-variable switching from white-to-blue to yellow-to-white. Based on the unique properties of CD@BA powder, the applications of recognizing and visualizing fingerprints on the surfaces of various of materials are demonstrated.

Rationally Designed Matrix-Free Carbon Dots with Wavelength-Tunable Room-Temperature Phosphorescence

We report the rational design of the matrix-free carbon dots (C-dots) with long wavelength and wavelength-tunable room-temperature phosphorescence (RTP). Taking advantage of microwave-assisted heating treatment, three RTP C-dots in boric acid (BA) composites are synthesized by using diethylenetriaminepentakis (methylphosphonic acid) as a multiple-sites crosslink agent, a moderately acid catalyst and P source; phenylenediamines (either o-PD, m-PD, or p-PD, respectively) as building block while BA as a carbonization-retardant matrix. After the water-soluble BA matrix is removed by dialysis, three matrix-free C-dots are obtained with RTP emission at 540, 550 and 570 nm under an excitation wavelength of 365 nm. Alterations of RTP emission of three matrix-free C-dots are ascribed to the difference in their particle size and band gap from n-π* transition. Furthermore, the application of three matrix-free C-dots are successfully performed in information encryption and decryption.

Multiple Stimuli-Response Polychromatic Carbon Dots for Advanced Information Encryption and Safety

Optical information encryption and safety have aroused great attention since they are closely correlated to data protection and information safety. The development of multiple stimuli-response optical materials for constructing large-capacity information encryption and safety is very important for practical applications. Carbon dots (CDs) have many gratifying merits, such as polychromatic emission, diverse luminous categories, and stable physicochemical properties, and are considered as one of the most ideal candidates for information protection. Herein, carbon core, functional groups, solvents, and other crucial factors are reviewed for outputting polychromatic emission of multiple luminous categories. In particular, substrate engineering strategies have been emphasized for their critical role in yielding excellent optical features of multiple luminous categories. High-capacity information encryption and safety strategies are reviewed by relying on the rich optical properties of CDs, such as polychromatic emission, multiple luminous categories of fluorescence, afterglow, and upconversion, as well as external-stimuli-assisted optical changes. Some perspectives for preparing excellent CDs and further developing information security strategies are proposed. This review provides a good reference for the manipulation of polychromatic CDs and the development of next-generation information encryption and safety.

Recent Advances of Carbon Dots with Afterglow Emission

Carbon dots (CDs) have gradually become a new generation of nano-luminescent materials, which have received extensive attention due to excellent optical properties, wide source of raw materials, low toxicity, and good biocompatibility. In recent years, there are many reports on the luminescent phenomenon of CDs, and great progress has been achieved. However,there are rarely systematic summaries on CDs with persistent luminescence. Here, a summary of the recent progress on persistent luminescent CDs, including luminous mechanism, synthetic strategies, property regulation, and potential applications, is given. First, a brief introduction is given to the development of CDs luminescent materials. Then, the luminous mechanism of afterglow CDs from room temperature phosphorescence (RTP), delayed fluorescence (DF), and long persistent luminescence (LPL) is discussed. Next, the constructed methods of luminescent CDs materials are summarized from two aspects, including matrix-free self-protected and matrix-protected CDs. Moreover, the regulation of afterglow properties from color, lifetime, and efficiency is presented. Afterwards, the potential applications of CDs, such as anti-counterfeiting, information encryption, sensing, bio-imaging, multicolor display, LED devices, etc., are reviewed. Finally, an outlook on the development of CDs materials and applications is proposed.

Long-Lived Dynamic Room Temperature Phosphorescence from Carbon Dots Based Materials

As a type of room temperature phosphorescence (RTP) material, carbon dots (CDs) always show short lifetime and low phosphorescence efficiency. To counter these disadvantages, several strategies, such as embedding in rigid matrix, introducing of heteroatom, crosslink-enhanced emission, etc., are well developed. Consequently, lots of CDs-based RTP materials are obtained. Doping of CDs into various matrix is the dominant method for preparation of long-lived CDs-based RTP materials so far. The desired CDs@matrix composites always display outstanding RTP performances. Meanwhile, matrix-free CDs and carbonized polymer dots-based RTP materials are also widely developed. Amounts of CDs possessing ultra-long lived, multiple colored, and dynamic RTP emission are successfully obtained. Herein, the recent progress achieved in CDs-based RTP materials as well as the corresponding efficient strategies and emission mechanisms are summarized and reviewed in detail. Due to CDs-based RTP materials possess excellent chemical stability, photostability and low biological toxicity, they exhibit great application potential in the fields of anti-counterfeiting, data encryption, and biological monitoring. The application of the CDs-based RTP materials is also introduced in this review. As a promising functional material, development of long wavelength RTP emitting CDs with long lifetime is still challengeable, especially for the red and near-infrared emitting RTP materials.

Silica-based mesoporous ion-imprinted fluorescent sensors for the detection of Pb2+in aqueous environments

In this work, an environment-friendly core-shell material based on CDs@SiO₂as the core and mesoporous ion-imprinted layer as the shell was reported. As a highly sensitive and accurate fluorescent sensor for the detection of Pb²⁺in environmental water, the composition combined ion imprinting technology with quantum dots to selectively quench the fluorescence of CDs by metal coordination in the presence of Pb²⁺, and the visual change of gradually weakening blue color could be observed by the naked eye for visual detection. The mesoporous structure significantly improved the detection recognition rate of CDs@SiO₂@MIIPs.The molecularly imprinted sensor presented a favorable linear relationship over a Pb²⁺concentration range from 10 nmol l^-1to 100 nmol l^-1and a detection limit of 2.16 nmol l^-1for Pb²⁺. The imprinting factor of the CDs@SiO₂@MIIPs was 5.13. The sensor has a fast detection rate, is highly selective in the identification of Pb²⁺, and can be reused up to 10 times. The applicability of the method was evaluated by the determination of Pb²⁺in spiked environmental water samples with satisfactory results.