Energy Harvesting Using Cotton Fabric Embedded with 2D Hexagonal Boron Nitride

Architectural design and affecting factors of MXene-based textronics for real-world application

Today, textile-based wearable electronic devices (textronics) have been developed by taking advantage of nanotechnology and textile substrates. Textile substrates offer flexibility, air permeability, breathability, and wearability, whereas, using nanomaterials offers numerous functional properties, like electrical conductivity, hydrophobicity, touch sensitivity, self-healing properties, joule heating properties, and many more. For these reasons, textronics have been extensively used in many applications. Recently, new emerging two-dimensional (2D) transition metal carbide and nitride, known as MXene, nanomaterials have been highly considered for developing textronics because the surface functional groups and hydrophilicity of MXene nanoflakes allow the facile fabrication of MXene-based textronics. In addition, MXene nanosheets possess excellent electroconductivity and mechanical properties as well as large surface area, which also give numerous opportunities to develop novel functional MXene/textile-based wearable electronic devices. Therefore, this review summarizes the recent advancements in the architectural design of MXene-based textronics, like fiber, yarn, and fabric. Regarding the fabrication of MXene/textile composites, numerous factors affect the functional properties (e.g. fabric structure, MXene size, etc.). All the crucial affecting parameters, which should be chosen carefully during the fabrication process, are critically discussed here. Next, the recent applications of MXene-based textronics in supercapacitors, thermotherapy, and sensors are elaborately delineated. Finally, the existing challenges and future scopes associated with the development of MXene-based textronics are presented.

Amorphous/Nanocrystalline, Lightweight, Wave-Transparent Boron Nitride Nanobelt Aerogel for Thermal Insulation

At present, the new generation of aircraft is developing in the direction of high speed, long endurance, high mobility, and repeatability. Some studies have shown that the surface temperature of the radome can reach even 1800 °C as the flight speed of the aircraft increases. However, the antenna inside the radome cannot serve at this temperature. Consequently, a thermal insulation system with electromagnetic wave-transparent ability and high-temperature resistance is urgently needed to protect the antenna from working normally. An aerogel material is known as "solid smoke," with the lowest density currently. Because of its high porosity (>90%) and the characteristics of nanopore size, its application in the field of thermal insulation always draws the attention of researchers. In this work, a novel amorphous/nanocrystalline boron nitride (BN) nanobelt aerogel was synthesized successfully. The BN aerogel shows lightweight (18 mg/cm3), good thermal stability (1400 °C under an inert atmosphere and 750 °C under an air atmosphere), wideband wave-transparent performance (dielectric constant of 1.03 and dielectric loss of 0.016 at 4-18 GHz), and thermal insulation property (43 mW/(m·K) at room temperature and 73 mW/(m·K) at 600 °C). The BN aerogel is a suitable candidate as an electromagnetic wave-transparent thermal insulator and fire-resistant material. What is more, the structural stability of the BN aerogel is good (Young's modulus remains basically constant during the fatigue tests), and the energy loss coefficient (∼0.56) is high; it also has the potential to be a mechanical energy dissipative material. The study on the amorphous/nanocrystalline BN nanobelt aerogel provides a new idea for structure design and performance optimization of a high-temperature electromagnetic functional insulation material.

Energy Harvesting Using ZnO Nanosheet-Decorated 3D-Printed Fabrics

In this work, we decorated piezoresponsive atomically thin ZnO nanosheets on a polymer surface using additive manufacturing (three-dimensional (3D) printing) technology to demonstrate electrical-mechanical coupling phenomena. The output voltage response of the 3D-printed architecture was regulated by varying the external mechanical pressures. Additionally, we have shown energy generation by placing the 3D-printed fabric on the padded shoulder strap of a bag with a load ranging from ∼5 to ∼75 N, taking advantage of the excellent mechanical strength and flexibility of the coated 3D-printed architecture. The ZnO coating layer forms a stable interface between ZnO nanosheets and the fabric, as confirmed by combining density functional theory (DFT) and electrical measurements. This effectively improves the output performance of the 3D-printed fabric by enhancing the charge transfer at the interface. Therefore, the present work can be used to build a new infrastructure for next-generation energy harvesters capable of carrying out several structural and functional responsibilities.

Antibacterial, UV-Protective, Hydrophobic, Washable, and Heat-Resistant BN-Based Nanoparticle-Coated Textile Fabrics: Experimental and Theoretical Insight

The use of nanoparticles (NPs) to modify the surface of cotton fabric is a promising approach to endowing the material with a set of desirable characteristics that can significantly expand the functionality, wear comfort, and service life of textile products. Herein, two approaches to modifying the surface of hexagonal boron nitride (h-BN) NPs with a hollow core and a smooth surface by treatment with maleic anhydride (MA) and diethylene triamine (DETA) were studied. The DETA and MA absorption on the surface of h-BN and the interaction of surface-modified h-NPs with cellulose as the main component of cotton were modeled using density functional theory with the extended Perdew-Burke-Ernzerhof functional. Theoretical modeling showed that the use of DETA as a binder agent can increase the adhesion strength of BN NPs to textile fabric due to the simultaneous hydrogen bonds with cellulose and BN. Due to the difference in zeta potentials (-38.4 vs -25.8 eV), MA-modified h-BN NPs form a stable suspension, while DETA-modified BN NPs tend to agglomerate. Cotton fabric coated with surface-modified NPs exhibits an excellent wash resistance and high hydrophobicity with a water contact angle of 135° (BN-MA) and 146° (BN-DETA). Compared to the original textile material, treatment with MA- and DETA-modified h-BN NPs increases heat resistance by 10% (BN-MA fabric) and 15% (BN-DETA fabric). Cotton fabrics coated with DETA- and MA-modified BN NPs show enhanced antibacterial activity against Escherichia coli U20 and Staphylococcus aureus strains and completely prevent the formation of an E. coli biofilm. The obtained results are important for the further development of fabrics for sports and medical clothing as well as wound dressings.