Ordered-Porous-Array Polymethyl Methacrylate Films for Radiative Cooling

Supramolecularly Connected Armor-like Nanostructure Enables Mechanically Robust Radiative Cooling Materials

Passive daytime radiative cooling (PDRC) is a promising practice to realize sustainable thermal management with no energy and resources consumption. However, there remains a challenge of simultaneously integrating desired solar reflectivity, environmental durability, and mechanical robustness for polymeric composites with nanophotonic structures. Herein, inspired by a classical armor shell of a pangolin, we adopt a generic design strategy that harnesses supramolecular bonds between the TiO2-decorated mica microplates and cellulose nanofibers to collectively produce strong interfacial interactions for fabricating interlayer nanostructured PDRC materials. Owing to the strong light scattering excited by hierarchical nanophotonic structures, the bioinspired film demonstrates a desired reflectivity (92%) and emissivity (91%) and an excellent temperature drop of 10 °C under direct sunlight. Notably, the film guarantees high strength (41.7 MPa), toughness (10.4 MJ m-3), and excellent environmental durability. This strategy provides possibilities in designing polymeric PDRC materials, further establishing a blueprint for other functional applications like soft robots, wearable devices, etc.

Strong double networked hybrid cellulosic foam for passive cooling

Up to now, energy conservation, emission reduction, and environmental protection are still the goals that humanity continuously pursues. Passive radiative cooling is a zero-consumption cooling technology, which gains more and more attention. However, the contraction between mechanical strength and cooling performance of traditional radiative cooling materials still limits their scalable production. In this work, we developed a strong double-networked hybrid cellulosic foam via crosslinking recyclable CNF and PVA with a silane coupling agent in the freeze-drying process. Meanwhile, nano zinc oxide and MOF were added to improve the mechanical and solar scattering of foam. Benefiting from the synergistic solar scattering of ZnO and MOF and the stable double crosslinking network, the as-prepared hybrid cellulosic foam exhibits high solar reflectivity of 0.965, high IR emissivity of 0.94, ultrahigh mechanical strength of and low thermal conductivity. Based on above results, the hybrid cellulosic foam shows high-performance daytime cooling efficiency of 7.5 °C under direct sunlight in the hot region (Nanjing, China), which can serve as outdoor thermal-regulation materials. This work demonstrates that biomass materials possess the enormous potential of in thermal regulating materials, and also provides great possibilities for their applications in energy conservation, environmental protection and green building materials.

Advanced Cooling Textiles: Mechanisms, Applications, and Perspectives

High-temperature environments pose significant risks to human health and safety. The body's natural ability to regulate temperature becomes overwhelmed under extreme heat, leading to heat stroke, dehydration, and even death. Therefore, the development of effective personal thermal-moisture management systems is crucial for maintaining human well-being. In recent years, significant advancements have been witnessed in the field of textile-based cooling systems, which utilize innovative materials and strategies to achieve effective cooling under different environments. This review aims to provide an overview of the current progress in textile-based personal cooling systems, mainly focusing on the classification, mechanisms, and fabrication techniques. Furthermore, the challenges and potential application scenarios are highlighted, providing valuable insights for further advancements and the eventual industrialization of personal cooling textiles.

Porous Structure of Polymer Films Optimized by Rationally Tuning Phase Separation for Passive All-Day Radiative Cooling

Passive all-day radiative cooling (PARC) films with porous structures prepared via nonsolvent-induced phase separation (NIPS) have attracted considerable attention owing to their cost-effectiveness and wide applicability. The PARC performances of the films correlate with their porous structures. However, the porous structure formed using the NIPS process cannot be finely regulated. In this study, we prepared polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) films with porous structures optimized by rationally tuning the phase separation, which was achieved by adjusting the proportions of two good solvents with varying solubility parameters. The optimized PVDF-HFP film with a hierarchically porous structure exhibited a high solar reflectance of 97.7% and an infrared emissivity of 96.7%. The film with excellent durability achieved an average subambient cooling temperature of approximately 5.4 °C under a solar irradiance of 945 W·m-2 as well as a temperature of 11.2 °C at nighttime, thus demonstrating all-day radiative cooling. The results indicate that the proposed films present a promising platform for large-scale applications in green building cooling and achieving carbon neutrality.

Antireflection and radiative cooling difunctional coating design for silicon solar cells

Passive daytime radiative cooling (PDRC) as a zero-energy consumption cooling method has broad application potential. Common commercial crystalline silicon (c-Si) solar cell arrays suffer working efficiency loss due to the incident light loss and overheating. In this work, a radiative cooler with PDMS (polydimethylsiloxane) film and embedded SiO₂ microparticles was proposed to use in silicon solar cells. Both anti-reflection and radiative cooling performance can be improved through numerical parametric study. For the best performing of PDMS/SiO₂ radiative cooler, the thickness of PDMS layer, volume fraction and radius of the embedded SiO₂ particles have been determined as 55 µm, 8% and 500 nm, respectively. 94% of emissivity in first atmospheric window band (8-13 µm) for radiative cooling and 93.4% of solar transmittance at the crystalline silicon absorption band (0.3-1.1 µm) were achieved. We estimated that the PDMS/SiO₂ radiative cooler can lower the temperature of a bare c-Si solar cell by 9.5°C, which can avoid 4.28% of efficiency loss. More incident light can enter and be utilized by silicon layer to enhance the efficiency of the solar cells. The proposed difunctional radiative cooling coating may become guidance for next generation encapsulation of crystalline silicon solar cells.