Laser-Induced Fast Assembly of Wettability-Finely-Tunable Superhydrophobic Surfaces for Lossless Droplet Transfer

Laser Interference Additive Manufacturing: Mask Bundle Shape Bionic Shark Skin Structure

Here, we explored a new manufacturing strategy that uses the mask laser interference additive manufacturing (MLIAM) technique, which combines the respective strengths of laser interference lithography and mask lithography to efficiently fabricate across-scales three-dimensional bionic shark skin structures with superhydrophobicity and adhesive reduction. The phenomena and mechanisms of the MLIAM curing process were revealed and analyzed, showing the feasibility and flexibility. In terms of structural performance, the adhesive force on the surface can be tuned based on the growth direction of the bionic shark skin structures, where the maximum rate of the adhesive reduction reaches about 65%. Furthermore, the evolution of the directional diffusion for the water droplet, which is based on the change of the contact angle, was clearly observed, and the mechanism was also discussed by the models. Moreover, no-loss transportations were achieved successfully using the gradient adhesive force and superhydrophobicity on the surface by tuning the growth direction and modifying by fluorinated silane. Finally, this work gives a strategy for fabricating across-scale structures on micro- and nanometers, which have potential application in bioengineering, diversional targeting, and condenser surface.

Understanding and Utilizing Droplet Impact on Superhydrophobic Surfaces: Phenomena, Mechanisms, Regulations, Applications, and Beyond

Droplet impact is a ubiquitous liquid behavior that closely tied to human life and production, making indispensable impacts on the big world. Nature-inspired superhydrophobic surfaces provide a powerful platform for regulating droplet impact dynamics. The collision between classic phenomena of droplet impact and the advanced manufacture of superhydrophobic surfaces is lighting up the future. Accurately understanding, predicting, and tailoring droplet dynamic behaviors on superhydrophobic surfaces are progressive steps to integrate the droplet impact into versatile applications and further improve the efficiency. In this review, the progress on phenomena, mechanisms, regulations, and applications of droplet impact on superhydrophobic surfaces, bridging the gap between droplet impact, superhydrophobic surfaces, and engineering applications are comprehensively summarized. It is highlighted that droplet contact and rebound are two focal points, and their fundamentals and dynamic regulations on elaborately designed superhydrophobic surfaces are discussed in detail. For the first time, diverse applications are classified into four categories according to the requirements for droplet contact and rebound. The remaining challenges are also pointed out and future directions to trigger subsequent research on droplet impact from both scientific and applied perspectives are outlined. The review is expected to provide a general framework for understanding and utilizing droplet impact.

A gravity-driven droplet fluidic point-of-care test

We report a simple droplet fluidic point-of-care test (POCT) that uses gravity to manipulate the sequence, timing, and motion of droplets on a surface. To fabricate this POCT, we first developed a surface coating toolbox of nine different coatings with three levels of wettability and three levels of slipperiness that can be independently tailored. We then fabricated a device that has interconnected fluidic elements-pumps, flow resistors and flow guides-on a highly slippery solid surface to precisely control the timing and sequence of motion of multiple droplets and their interactions on the surface. We then used this device to carry out a multi-step enzymatic assay of a clinically relevant analyte-lactate dehydrogenase (LDH)-to demonstrate the application of this technology for point-of-care diagnosis.

Fabrication of Transferable and Micro/Nanostructured Superhydrophobic Surfaces Using Demolding and iCVD Processes

Superhydrophobic surfaces possess enormous potential in various applications on account of their versatile functionalities. However, artificial superhydrophobic surfaces with ultralow solid/liquid adhesion often require complicated structure fabrication and surface fluorination processes. Here, we designed a superhydrophobic surface possessed of micro/nanoscale structures by employing facile and low-cost demolding and initiated chemical vapor deposition (iCVD) processes. The achieved micro/nanostructured superhydrophobic surface has a maximum static contact angle of ∼170°, a roll-off angle and contact angle hysteresis below 1°, ultralow solid/liquid adhesion for water droplets, and maintains excellent superhydrophobicity after exposure to strongly corrosive species, like strong acid/base and salt solutions, for 60 h. This reasonability-designed method of creating the superhydrophobic surface could provide valuable guidelines for the manufacture of transferable superhydrophobic surfaces and facilitate potential applications extending from optoelectronic devices to self-cleaning materials, such as solar cells, windows, and electronic displays.