Lithium-Rich Porous Aromatic Framework-Based Quasi-Solid Polymer Electrolyte for High-Performance Lithium Ion Batteries

Lithium-Rich Porous Aromatic Framework Doped Quasi-Solid Polymer Electrolyte for Lithium Battery with High Cycling Stability

Lithium-ion batteries (LIBs) have revolutionized the energy storage landscape and are the preferred power source for various applications, ranging from portable electronics to electric vehicles. The constant drive and growth in battery research and development aim to enhance their performance, energy density, and safety. Advanced lithium batteries (LIBs) are considered to be the most promising electrochemical storage devices, which can provide high specific energy, volumetric energy density, and power density. However, the trade-off between ionic conductivity and cycling stability is still a major contradiction for SPEs. In this work, a novel hydroxylated PAF-1 was designed and synthesized through post-modification, and the lithium-rich single-ion porous aromatic framework PAF-1-OLi was thereafter prepared by lithiation, achieved with a specific surface area to be 155 m2 g-1 and a lithium content of 2.01 mmol g-1. PAF-1-OLi, lithium bis(trifluoromethanesulfony)limine (LiTFSI), and poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) were compounded to obtain PAF-1-OLi/PVDF by solution casting, which had good mechanical, thermodynamic, and electrochemical properties. The ion conductivity of PAF-1-OLi/PVDF infiltrated with plasticizer was 2.93 × 10-4 S cm-1 at 25 °C. The tLi+ was 0.77, which was much higher than that of the traditional dual-ion polymer electrolytes. The electrochemical window of PAF-1-OLi/PVDF can reach 4.9 V. The Li//PAF-1-OLi/PVDF//LiFePO4 battery initial discharge specific capacity was 147 mAh g-1 and reached 134.9 mAh g-1 after 600 cycles with a capacity retention rate of 91.2%, demonstrating its good cycling stability. The anionic part of lithium salt was fixed on the framework of PAF-1 to increase the Li+ transfer number of PAF-1-OLi/PVDF. The lithium-rich PAF-1-OLi and the LiTFSI provided abundant Li+ sources to transfer, while PAF-1-OLi helped to form a continuous Li+ transport channel, effectively promoting the migration of Li+ in the PAF-1-OLi/PVDF and effectively improving the Li+ conductivity. This study afforded a novel polymer electrolyte based on lithium-rich PAF-1-OLi, which has excellent electrochemical performance, providing a new choice for the polymer electrolyte of lithium batteries.

Lignin Derived Ultrathin All-Solid Polymer Electrolytes with 3D Single-Ion Nanofiber Ionic Bridge Framework for High Performance Lithium Batteries

The lignin derived ultrathin all-solid composite polymer electrolyte (CPE) with a thickness of only 13.2 µm, which possess 3D nanofiber ionic bridge networks composed of single-ion lignin-based lithium salt (L-Li) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the framework, and poly(ethylene oxide)/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) as the filler, is obtained through electrospinning/spraying and hot-pressing. t. The Li-symmetric cell assembled with the CPE can stably cycle more than 6000 h under 0.5 mA cm-2 with little Li dendrites growth. Moreover, the assembled Li||CPE||LiFePO4 cells can stably cycle over 700 cycles at 0.2 C with a super high initial discharge capacity of 158.5 mAh g-1 at room temperature, and a favorable capacity of 123 mAh g-1 at -20 °C for 250 cycles. The excellent electrochemical performance is mainly attributed to the reason that the nanofiber ionic bridge network can afford uniformly dispersed single-ion L-Li through electrospinning, which synergizes with the LiTFSI well dispersed in PEO to form abundant and efficient 3D Li+ transfer channels. The ultrathin CPE induces uniform deposition of Li+ at the interface, and effectively inhibit the lithium dendrites. This work provides a promising strategy to achieve ultrathin biobased electrolytes for solid-state lithium ion batteries.

Relationships Between Defectivity and Porosity in High Surface Area Porous Aromatic Frameworks

Porous aromatic framework (PAF) microporosity is known to be strongly dependent on synthetic approach but little is known about why certain reactions yield significantly and consistently more porous PAFs. This article explores the connections between synthetic pathway, PAF defectivity, and microporosity. Using a network disassembly strategy, we show that defectivity is highly dependent on synthetic approach and that more defective PAFs are associated with lower surface areas and pore volumes. This empirical association is corroborated through systematic introduction of defects to a modelPAF, which results in significant reduction of apparent surface area and pore volumes. Taken together, these data suggest that only highly efficient coupling reactions should be targeted for the synthesis of ultra-high surface area porous aromatic frameworks.

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Metal halide inorganic perovskite solar cells (PSCs) have great potential to achieve high efficiency with excellent thermal stability. However, the surface defect traps restrain the achievement of high open circuit voltage (VOC ) and power conversion efficiency (PCE) of the devices due to the severe nonradiative charge recombination. Moreover, the state-of-the-art hole transporting layer (HTL) significantly hampers device moisture stability, even though it renders the highest solar cell efficiency. Herein, a one-stone-two-birds strategy is proposed using a biocompatible material tryptamine (TA) as an additive in HTL. First, TA bearing electron rich moieties can favorably passivate the surface defects of inorganic perovskite films, significantly reducing trap density and prolonging charge lifetime. It results in a drastic improvement of VOC from 1.192 to 1.251 V, with a VOC loss of 0.48 V. The corresponding PSCs achieve a 21.8% PCE under 100 mW cm-2 illumination. Second, TA in HTL can coordinate with lithium cations, retarding their reaction with moisture and increasing the moisture stability of HTL. Consequently, the black phase of inorganic perovskite films is well preserved, and the corresponding PSCs maintain 90% of the initial PCE after 800 h storage at relative humidity of 25-35%, much higher than the control devices.

Single-Ion Polymer Electrolyte Based on Lithium-Rich Imidazole Anionic Porous Aromatic Framework for High Performance Lithium-Ion Batteries

The low ionic conductivity and Li+ transference number (t L i + ${t}_{L{i}^ + }$ ) of solid polymer electrolytes (SPEs) seriously hinder their application in lithium-ion batteries (LIBs). In this study, a novel single-ion lithium-rich imidazole anionic porous aromatic framework (PAF-220-Li) is designed. The abundant pores in PAF-220-Li are conducive to the Li+ transfer. Imidazole anion has low binding force with Li+ . The conjugation of imidazole and benzene ring can further reduce the binding energy between Li+ and anions. Thus, only Li+ moved freely in the SPEs, remarkably reducing the concentration polarization and inhibiting lithium dendrite growth. PAF-220-quasi-solid polymer electrolyte (PAF-220-QSPE) is prepared through solution casting of Bis(trifluoromethane)sulfonimide lithium (LiTFSI) infused PAF-220-Li and Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP), and possessed excellent electrochemical performance. The electrochemical property are further improved by preparing all-solid polymer electrolyte (PAF-220-ASPE) via pressing-disc method, which has a high Li+ conductivity of 0.501 mS cm-1 andt L i + ${t}_{L{i}^ + }$ of 0.93. The discharge specific capacity at 0.2 C of Li//PAF-220-ASPE//LFP reached 164 mAh g-1 , and the capacity retention rate is 90% after 180 cycles. This study provided a promising strategy for SPE with single-ion PAFs to achieve high-performance solid-state LIBs.