In Vivo Chronic Brain Cortex Signal Recording Based on a Soft Conductive Hydrogel Biointerface

Interface-Mediated Neurogenic Signaling: The Impact of Surface Geometry and Chemistry on Neural Cell Behavior for Regenerative and Brain-Machine Interfacing Applications

Nanomaterial advancements have driven progress in central and peripheral nervous system applications such as tissue regeneration and brain-machine interfacing. Ideally, neural interfaces with native tissue shall seamlessly integrate, a process that is often mediated by the interfacial material properties. Surface topography and material chemistry are significant extracellular stimuli that can influence neural cell behavior to facilitate tissue integration and augment therapeutic outcomes. This review characterizes topographical modifications, including micropillars, microchannels, surface roughness, and porosity, implemented on regenerative scaffolding and brain-machine interfaces. Their impact on neural cell response is summarized through neurogenic outcome and mechanistic analysis. The effects of surface chemistry on neural cell signaling with common interfacing compounds like carbon-based nanomaterials, conductive polymers, and biologically inspired matrices are also reviewed. Finally, the impact of these extracellular mediated neural cues on intracellular signaling cascades is discussed to provide perspective on the manipulation of neuron and neuroglia cell microenvironments to drive therapeutic outcomes.

Engineering surgical face masks with photothermal and photodynamic plasmonic nanostructures for enhancing filtration and on-demand pathogen eradication

The shortage of face masks and the lack of antipathogenic functions has been significant since the recent pandemic's inception. Moreover, the disposal of an enormous number of contaminated face masks not only carries a significant environmental impact but also escalates the risk of cross-contamination. This study proposes a strategy to upgrade available surgical masks into antibacterial masks with enhanced particle and bacterial filtration. Plasmonic nanoparticles can provide photodynamic and photothermal functionalities for surgical masks. For this purpose, gold nanorods act as on-demand agents to eliminate pathogens on the surface of the masks upon near-infrared light irradiation. Additionally, the modified masks are furnished with polymer electrospun nanofibrous layers. These electrospun layers can enhance the particle and bacterial filtration efficiency, not at the cost of the pressure drop of the mask. Consequently, fabricating these prototype masks could be a practical approach to upgrading the available masks to alleviate the environmental toll of disposable face masks.

Developing strategies to optimize the anchorage between electrospun nanofibers and hydrogels for multi-layered plasmonic biomaterials

Polycaprolactone (PCL), a recognized biopolymer, has emerged as a prominent choice for diverse biomedical endeavors due to its good mechanical properties, exceptional biocompatibility, and tunable properties. These attributes render PCL a suitable alternative biomaterial to use in biofabrication, especially the electrospinning technique, facilitating the production of nanofibers with varied dimensions and functionalities. However, the inherent hydrophobicity of PCL nanofibers can pose limitations. Conversely, acrylamide-based hydrogels, characterized by their interconnected porosity, significant water retention, and responsive behavior, present an ideal matrix for numerous biomedical applications. By merging these two materials, one can harness their collective strengths while potentially mitigating individual limitations. A robust interface and effective anchorage during the composite fabrication are pivotal for the optimal performance of the nanoplatforms. Nanoplatforms are subject to varying degrees of tension and physical alterations depending on their specific applications. This is particularly pertinent in the case of layered nanostructures, which require careful consideration to maintain structural stability and functional integrity in their intended applications. In this study, we delve into the influence of the fiber dimensions, orientation and surface modifications of the nanofibrous layer and the hydrogel layer's crosslinking density on their intralayer interface to determine the optimal approach. Comprehensive mechanical pull-out tests offer insights into the interfacial adhesion and anchorage between the layers. Notably, plasma treatment of the hydrophobic nanofibers and the stiffness of the hydrogel layer significantly enhance the mechanical effort required for fiber extraction from the hydrogels, indicating improved anchorage. Furthermore, biocompatibility assessments confirm the potential biomedical applications of the proposed nanoplatforms.

A Photocurable Polysaccharide-Based Hydrogel Delivery of Polydeoxyribonucleotide-Loaded Vectors for Wound Treatment

The wounds caused by war, accidents, and diseases require timely and effective treatment. Polysaccharides, as natural macromolecules, have good biocompatibility and unique functions, and are excellent substrates for constructing new wound dressings. Short-chain chitosan (SCS) has good water solubility and, importantly, retains a large number of active amino groups. We first introduce double bonds to SCS. This chitosan derivative can be entangled with sodium alginate (SA) through electrostatic interaction. The flowing sol can be applied to a wound with an irregular shape. Under the initiation of a photoinitiator, the internal double bonds are broken and cross-linked to form a gel. The prepared hydrogel wound dressing exhibited good antibacterial properties and can provide a microenvironment conducive to wound repair. A polydeoxyribonucleotide (PDRN) has been proven to have encouraging therapeutic effects for wound healing. PDRN can be condensed by branched polyethylenimine (PEI) to form a nucleic acid delivery system, which can be efficiently uptaken by cells. The cooperation of hydrogel and nucleic-acid-based therapy presented good results in a mouse full-thickness skin wound model.

Conducting Polymer-Hydrogel Interpenetrating Networks for Improving the Electrode-Neural Interface

Implantable neural microelectrodes are recognized as a bridge for information exchange between inner organisms and outer devices. Combined with novel modulation technologies such as optogenetics, it offers a highly precise methodology for the dissection of brain functions. However, achieving chronically effective and stable microelectrodes to explore the electrophysiological characteristics of specific neurons in free-behaving animals continually poses great challenges. To resolve this, poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)/poly(vinyl alcohol) (PEDOT/PSS/PVA) interpenetrating conducting polymer networks (ICPN) are fabricated via a hydrogel scaffold precoating and electrochemical polymerization process to improve the performance of neural microelectrodes. The ICPN films exhibit robust interfacial adhesion, a significantly lower electrochemical impedance, superior mechanical properties, and improved electrochemical stability compared to the pure poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)(PEDOT/PSS) films, which may be attributed to the three-dimensional (3D) porous microstructure of the ICPN. Hippocampal neurons and rat pheochromocytoma cells (PC12 cells) adhesion on ICPN and neurite outgrowth are observed, indicating enhanced biocompatibility. Furthermore, alleviated tissue response at the electrode-neural tissue interface and improved recording signal quality are confirmed by histological and electrophysiological studies, respectively. Owing to these merits, optogenetic modulations and electrophysiological recordings are performed in vivo, and an anxiolytic effect of hippocampal glutamatergic neurons on behavior is shown. This study demonstrates the effectiveness and advantages of ICPN-modified neural implants for in vivo applications.

Conducting polymer-based nanostructured materials for brain-machine interfaces

As scientists discovered that raw neurological signals could translate into bioelectric information, brain-machine interfaces (BMI) for experimental and clinical studies have experienced massive growth. Developing suitable materials for bioelectronic devices to be used for real-time recording and data digitalizing has three important necessitates which should be covered. Biocompatibility, electrical conductivity, and having mechanical properties similar to soft brain tissue to decrease mechanical mismatch should be adopted for all materials. In this review, inorganic nanoparticles and intrinsically conducting polymers are discussed to impart electrical conductivity to systems, where soft materials such as hydrogels can offer reliable mechanical properties and a biocompatible substrate. Interpenetrating hydrogel networks offer more mechanical stability and provide a path for incorporating polymers with desired properties into one strong network. Promising fabrication methods, like electrospinning and additive manufacturing, allow scientists to customize designs for each application and reach the maximum potential for the system. In the near future, it is desired to fabricate biohybrid conducting polymer-based interfaces loaded with cells, giving the opportunity for simultaneous stimulation and regeneration. Developing multi-modal BMIs, Using artificial intelligence and machine learning to design advanced materials are among the future goals for this field. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Neurological Disease.

Functionalized hydrogels in neural injury repairing

Repairing injuries to the nervous system has always been a prominent topic in clinical research. Direct suturing and nerve displacement surgery are the primary treatment options, but they may not be suitable for long nerve injuries and may require sacrificing the functionality of other autologous nerves. With the emergence of tissue engineering, hydrogel materials have been identified as a promising technology with clinical translation potential for repairing nervous system injuries due to their excellent biocompatibility and ability to release or deliver functional ions. By controlling their composition and structure, hydrogels can be Functionalized and almost fully matched with nerve tissue and even simulate nerve conduction function and mechanical properties. Thus, they are suitable for repairing injuries to both the central and peripheral nervous systems. This article provides a review of recent research progress in functionalized hydrogels for nerve injury repair, highlighting the design differences among various materials and future research directions. We strongly believe that the development of functionalized hydrogels has great potential for improving the clinical treatment of nerve injuries.

Utilization of compressible hydrogels as electrolyte materials for supercapacitor applications

Utilization of CoO@Co₃O₄-x-Ag (x denotes 1, 3, and 5 wt% of Ag) nanocomposites as supercapacitor electrodes is the main aim of this study. A new low-temperature wet chemical approach is proposed to modify the commercial cobalt oxide material with silver nanoparticle (NP) balls of size 1-5 nm. The structure and morphology of the as-prepared nanocomposites were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption-desorption measurements. Hydrogels known to be soft but stable structures were used here as perfect carriers for conductive nanoparticles such as carbons. Furthermore, hydrogels with a large amount of water in their network can give more flexibility to the system. Fabrication of an electrochemical cell can be achieved by combining these materials with a layer-by-layer structure. The performance characteristics of the cells were examined by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic charge discharge (GCD). Cobalt oxide modified with 5 wt% Ag gave the best supercapacitor results, and the cell offers a specific capacitance of ∼38 mF cm^-2 in two-electrode configurations.