Development of Antifreezing, Printable, Adhesive, Tough, Biocompatible, High-Water Content Hydrogel for Versatile Applications

Self-healable, stimuli-responsive bio-ionic liquid and sodium alginate conjugated hydrogel with tunable Injectability and mechanical properties for the treatment of breast cancer

Designing stimuli-responsive drug delivery vehicles with higher drug loading capacity, sustained and targeted release of anti-cancer drugs and able to mitigate the shortcomings of traditional systems is need of hour. Herein, we designed stimuli-responsive, self-healable, and adhesive hydrogel through synergetic interaction between [Cho][Gly] (Choline-Glycine) and sodium alginate (SA). The hydrogel was formed as a result of non-covalent interaction between the components of the mixture forming the fibre kind morphology; confirmed through FTIR/computational analysis and SEM/AFM images. The hydrogel exhibited excellent mechanical strength, self-healing ability, adhesive character and most importantly; adjustable injectability. In vitro biocompatibility of the hydrogel was tested on HaCaT and MCF-7 cells, showing >92 % cell viability after 48 h. The hemolysis ratio (<4 %) of the hydrogel confirmed the blood compatibility of the hydrogel. When tested for drug-loading capacity, the hydrogel show 1500 times drug loading for the 5-fluorouracil (5-FU) against the SA based hydrogel. In vitro release data indicated that 5-FU have more preference towards the cancerous cell condition, i.e. acidic pH (>85 %), whereas the drug-loaded hydrogel successfully killed the MCF-7 and HeLa cell with a Collapse

Key Words

• Bio-ionic liquid
• Injectable-hydrogel
• Sodium alginate

Collapse

MESH Headings

• Alginates/chemistry
• Humans
• Breast Neoplasms/drug therapy
• Breast Neoplasms/pathology
• Hydrogels/chemistry
• MCF-7 Cells
• Female
• Drug Liberation
• Drug Carriers/chemistry
• Fluorouracil/pharmacology
• Fluorouracil/chemistry
• Cell Survival/drug effects
• Hemolysis/drug effects
• Drug Delivery Systems
• Antineoplastic Agents/pharmacology
• Antineoplastic Agents/chemistry

Collapse

Grants Collapse

Affiliation(s)

Raviraj Pansuriya Ionic Liquids Research Laboratory, Department of Chemistry, Sardar Vallabhbhai National Institute of Technology, Surat 395007, Gujarat, India
Tapas Patel Ionic Liquids Research Laboratory, Department of Chemistry, Sardar Vallabhbhai National Institute of Technology, Surat 395007, Gujarat, India
Kuldeep Singh Salt and Marine Chemicals Division, CSIR-Central Salt and Marine Chemicals Research Institute, Council of Scientific and Industrial Research, G. B. Marg, Bhavnagar 364002, India
Azza Al Ghamdi Department of Chemistry, College of Science, Imam Abdul Rahman Bin Faisal University, P.O. Box 1982, Dammam 31441, Saudi Arabia; Basic & Applied Scientific Research Center (BASRC), Water Treatment Unit, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam 31441, Saudi Arabia
Naresh Kasoju Sree Chitra Tirunal Institute for Medical Sciences and Technology, Trivandrum 695011, Kerala, India
Arvind Kumar Salt and Marine Chemicals Division, CSIR-Central Salt and Marine Chemicals Research Institute, Council of Scientific and Industrial Research, G. B. Marg, Bhavnagar 364002, India
Suresh Kumar Kailasa Ionic Liquids Research Laboratory, Department of Chemistry, Sardar Vallabhbhai National Institute of Technology, Surat 395007, Gujarat, India
Naved I Malek Ionic Liquids Research Laboratory, Department of Chemistry, Sardar Vallabhbhai National Institute of Technology, Surat 395007, Gujarat, India.

Collapse

Facile Formation of Multifunctional Biomimetic Hydrogel Fibers for Sensing Applications

To face the challenges in preparing hydrogel fibers with complex structures and functions, this study utilized a microfluidic coaxial co-extrusion technique to successfully form functional hydrogel fibers through rapid ionic crosslinking. Functional hydrogel fibers with complex structures, including linear fibers, core-shell structure fibers, embedded helical channels, hollow tubes, and necklaces, were generated by adjusting the composition of internal and external phases. The characteristic parameters of the hydrogel fibers (inner and outer diameter, helix generation position, pitch, etc.) were achieved by adjusting the flow rate of the internal and external phases. As biocompatible materials, hydrogel fibers were endowed with electrical conductivity, temperature sensitivity, mechanical enhancement, and freeze resistance, allowing for their use as temperature sensors for human respiratory monitoring and other biomimetic application developments. The hydrogel fibers had a conductivity of up to 22.71 S/m, a response time to respiration of 37 ms, a recovery time of 1.956 s, and could improve the strength of respiration; the tensile strength at break up to 8.081 MPa, elongation at break up to 159%, and temperature coefficient of resistance (TCR) up to -13.080% °C-1 were better than the existing related research.

Enhancement of Mechanical Properties of Benign Polyvinyl Alcohol/Agar Hydrogel by Crosslinking Tannic Acid and Applying Multiple Freeze/Thaw Cycles

Hydrogels composed of natural and synthetic polymers have considerable potential for use in diverse areas such as biomedical applications and water purification. This is primarily because of their biocompatibility, biodegradability, and low toxicity. The widespread usage of composite hydrogels is hindered by a lack of simultaneous properties, such as high strength and low swelling rate. Herein, we report the preparation of novel hydrogels composed of polyvinyl alcohol (PVA)-intercalated agar polymer networks physically crosslinked with tannic acid. The hydrogel was subjected to multiple freeze/thaw (F/T) cycles (1, 3, and 5), and it was found to exhibit the highest strength after 5 F/T cycles. After 1 F/T cycle, the tensile strength of the composite hydrogel reached 1.56 MPa with a 1.0 wt% crosslinker, whereas after 5 F/T cycles, it increased to 3.77 MPa with a reduced amount (0.75 wt%) of the crosslinker. In addition, the swelling ability decreased upon increasing the crosslinker content and number of F/T cycles. Furthermore, the hydrogel demonstrated excellent water retention and a strong ability to adhere to different substrates. We have successfully implemented an innovative approach to improve the mechanical properties of PVA-based hydrogels by combining the use of tannic acid as a cross-linking agent and multiple F/T cycles. The developed hydrogels are expected to facilitate new developments in hydrogel technology, thus impacting diverse fields such as biomedical (wound dressing and artificial cartilage).

Photocuring 3D Printing of Hydrogels: Techniques, Materials, and Applications in Tissue Engineering and Flexible Devices

Photocuring 3D printing of hydrogels, with sophisticated, delicate structures and biocompatibility, attracts significant attention by researchers and possesses promising application in the fields of tissue engineering and flexible devices. After years of development, photocuring 3D printing technologies and hydrogel inks make great progress. Herein, the techniques of photocuring 3D printing of hydrogels, including direct ink writing (DIW), stereolithography (SLA), digital light processing (DLP), continuous liquid interface production (CLIP), volumetric additive manufacturing (VAM), and two photon polymerization (TPP) are reviewed. Further, the raw materials for hydrogel inks (photocurable polymers, monomers, photoinitiators, and additives) and applications in tissue engineering and flexible devices are also reviewed. At last, the current challenges and future perspectives of photocuring 3D printing of hydrogels are discussed.

Thermoreversible and tunable supramolecular hydrogels based on chitosan and metal cations

A new thermoreversible and tunable hydrogel CS-M with high water content prepared by metal cation (M = Cu²⁺, Zn²⁺, Cd²⁺ and Ni²⁺) and chitosan (CS) was reported. The influence of metal cations on the thermosensitive gelation of CS-M systems were studied. All prepared CS-M systems were in the transparent and stable sol state and could become the gel state at gelation temperature (T_g). These systems after gelation could recover to its original sol state at low temperature. CS-Cu hydrogel was mainly investigated and characterized due to its large T_g scale (32-80 °C), appropriate pH range (4.0-4.6) and low Cu²⁺ concentration. The result showed that the T_g range was influenced and could be tuned by adjusting Cu²⁺ concentration and system pH within an appropriate range. The influence of anions (Cl^-, NO3^- and Ac^-) in cupric salts in the CS-Cu system was also investigated. Scale application as heat insulation window was investigated outdoors. The different supramolecular interactions of the -NH₂ group in chitosan at different temperatures were proposed to dominate the thermoreversible process of CS-Cu hydrogel.