Scalable Fabrication of Reversible Antifouling Block Copolymer Coatings via Adsorption Strategies

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Effect of Polyelectrolyte Charge Density on the Linear Viscoelastic Behavior and Processing of Complex Coacervate Adhesives

It is well-known that the phase behavior and physicochemical and adhesive properties of complex coacervates are readily tuneable with the salt concentration of the medium. For toxicity reasons, however, the maximum applicable salt concentration in biomedical applications is typically low. Consequently, other strategies must be implemented in order to optimize the properties of the resulting complex coacervates. In this work, the effect of the charge density of a strong polyanion on the properties of complex coacervates was studied. To control this charge density, statistical anionic/charge-neutral hydrophilic copolymers were synthesized by means of an elegant protection/deprotection strategy and subsequently complexed with a strong polycation. The resulting complexes were observed to have an increasing water content as well as faster relaxation dynamics, with either increasing salt concentration or decreasing charge density. Time-salt and time-salt-charge density superpositions could be performed and showed that the relaxation mechanism of the complex coacervates remained unchanged. When the charge density was decreased, lower salt concentration complexes became suitable for viscoelastic adhesion with improved injectability. Such complex coacervates are promising candidates for injectable biomedical adhesives.

Toward Effective and Adsorption-Based Antifouling Zipper Brushes: Effect of pH, Salt, and Polymer Design

The undesired spontaneous deposition and accumulation of matter on surfaces, better known as fouling, is a problematic and often inevitable process plaguing a variety of industries. This detrimental process can be reduced or even prevented by coating surfaces with a dense layer of end-grafted polymer: a polymer brush. Producing such polymer brushes via adsorption presents a very attractive technique, as large surfaces can be coated in a quick and simple manner. Recently, we introduced a simple and scalable two-step adsorption strategy to fabricate block copolymer-based antifouling coatings on hydrophobic surfaces. This two-step approach involved the initial adsorption of hydrophobic-charged diblock copolymer micelles acting as a primer, followed by the complexation of oppositely charged-antifouling diblock copolymers to form the antifouling brush coating. Here, we significantly improve this adsorption-based zipper brush via systematic tuning of various parameters, including pH, salt concentration, and polymer design. This study reveals several key outcomes. First of all, increasing the hydrophobic/hydrophilic block ratio of the anchoring polymeric micelles (i.e., decreasing the hydrophilic corona) promotes adsorption to the surface, resulting in the most densely packed, uniform, and hydrophilic primer layers. Second, around a neutral pH and at a low salt concentration (1 mM), complexation of the weak polyelectrolyte (PE) blocks results in brushes with the best antifouling efficacy. Moreover, by tuning the ratio between these PE blocks, the brush density can be increased, which is also directly correlated to the antifouling performance. Finally, switching to different antifouling blocks can increase the internal density or strengthen the bound hydration layer of the brush, leading to an additional enhancement of the antifouling properties (>99% lysozyme, 87% bovine serum albumin).

Scalable Air-Tolerant μL-Volume Synthesis of Thick Poly(SPMA) Brushes Using SI-ARGET-ATRP

We present a facile procedure for preparing thick (up to 300 nm) poly(3-sulfopropyl methacrylate) brushes using SI-ARGET-ATRP by conducting the reaction in a fluid film between the substrate and a coverslip. This method is advantageous in a number of ways: it does not require deoxygenation of the reaction solution, and the monomer conversion is much higher than usual since only a minimal amount of solution (microliters) is used, resulting in a tremendous reduction (∼50×) of wasted reagents. Moreover, this method is particularly suitable for grafting brushes to large substrates.

One-Pot Synthesis of Strong Anionic/Charge-Neutral Amphiphilic Block Copolymers

Despite the ever more versatile polymerization techniques that are becoming available, the synthesis of macromolecules with tailored functionalities can remain a lengthy endeavor. This becomes more conspicuous when the implementation of incompatible chemistries (i.e., strong polyelectrolytes) within sequence-controlled polymers is desired, often requiring (i) polymerization, (ii) chain extension, and (iii) postpolymerization modification. Herein, we explore the production of strong anionic/charge-neutral block copolymers (BCPs) in a one-pot fashion. This straightforward three-step process includes the synthesis of a macroinitiator and chain extension via rapid and efficient photomediated atom transfer radical polymerization, followed by in situ deprotection to expose the polyanionic domains. The resulting BCPs, which are strong amphiphiles by nature, are capable of self-assembly in aqueous media, as evidenced by dynamic light scattering, small-angle X-ray scattering, ζ-potential measurements, and transmission electron microscopy. We further demonstrate the versatility of our methodology by producing several BCPs through sampling of a single reaction mixture, enabling the straightforward production of strong polymer amphiphiles.