Ultrahigh Proton Conductivities of Postmodified Hf(IV) Metal-Organic Frameworks and Related Chitosan-Based Composite Membranes

Proton Conducting Metal-Organic Frameworks (MOFs) via Post Synthetic Transmetallation and Water Induced Structural Transformations

Post Synthetic Modification (PSM) of Metal-Organic Frameworks (MOFs) is a crucial strategy for developing new MOFs with enhanced functional properties compared to their parent one. PSM can be accomplished through various methods:1) modification of organic linkers; 2) exchange of metal ions or nodes; and 3) inclusion or exchange of solvent/guest molecules. Herein, PSM of bimetallic and monometallic MOFs containing biphenyl dinitro-tetra-carboxylates (NCA) are demonstrated. The tetra carboxylate NCA, produces monometallic Cd-MOF-1 and Cu-MOF-1 and bimetallic CoZn-MOF in solvothermal reactions with the corresponding metal salts. The CoZn-MOF undergoes post-synthetic transmetallation with Cd(NO3)2 and Cu(NO3)2 in aqueous solution to yield Cd-MOF-2 and Cu-MOF-2, respectively. Additionally, green crystals of Cu-MOF-1 found to undergo a single-crystal-to-single-crystal (SCSC) transformation to blue crystals of Cu-MOF-3 upon dipped into water at room temperature. These MOFs demonstrate notable proton conductivities ranging from 10-3 to 10-4 S cm-1 under variable temperatures and humidity levels. Among them, Cu-MOF-3 achieves the highest proton conductivity of 1.36×10-3 S cm-1 at 90 °C and 98 % relative humidity, attributed to its continuous and extensive hydrogen bonding network, which provides effective proton conduction pathways within the MOF. This work highlights a convenient strategy for designing proton-conducting MOFs via post-synthetic modification.

Molecular-Level Modification of Sulfonated Poly(arylene ether ketone sulfone) with Polyoxovanadate-Ionic Liquid for High-Performance Proton Exchange Membranes

In this work, a proton-conductive inorganic filler based on polyoxovanadate (NH4)7[MnV13O38] (AMV) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIM TFSI) was synthesized for hybridization with sulfonated poly(aryl ether ketone sulfone) (SPAEKS) to address the "trade-off" between high proton conductivity and mechanical strength. The novel inorganic filler AMV-EMIM TFSI (AI) was uniformly dispersed and stable within the polymer matrix due to the enhanced ionic interaction. AI provided additional proton transport sites, leading to an elevated ion exchange capacity (IEC) and improved proton conductivity, even at low swelling ratios. The optimized SPAEKS-50/AI-5 (50 for degree of sulfonation of SPAEKS and 5 for weight percentage of AI filler) membrane exhibited the highest proton conductivity of 0.188 S·cm-1 at 80 °C with an IEC of 2.38 mmol·g-1. The enhancement of intermolecular forces improved the mechanical strength from 35 to 55 MPa and improved the elongation at break from 17 to 45%, indicating excellent mechanical properties. The hybrid membrane also demonstrated reinforced methanol resistance due to the hydrogen bonding network and blocking effect, making it suitable for direct methanol fuel cell (DMFC) applications, which exhibited a power density of 15.1 mW·cm-2 at 80 °C. The possibility of further functionalizing these hybrid membranes to tailor their properties for specific applications presents exciting new avenues for research and development. By modification of the type and distribution of fillers or incorporation of additional functional groups, the membranes could be customized to meet the unique demands of various energy storage and conversion systems, enhancing their performance and broadening their application scope. This work provides new insights into the design of polymer electrolyte membranes through inorganic filler hybridization.

Selective detection of food contaminants using engineered gallium-organic frameworks with MD and metadynamics simulations

The exclusion mechanism of food contaminants such as bisphenol A (BPA), Flavonoids (FLA), and Goitrin (GOI) onto the novel gallium-metal organic framework (MOF) and functionalized MOF with oxalamide group (MOF-OX) is evaluated by utilizing molecular dynamics (MD) and Metadynamics simulations. The atoms in molecules (AIM) analysis detected different types of atomic interactions between contaminant molecules and substrates. To assess this procedure, a range of descriptors including interaction energies, root mean square displacement, radial distribution function (RDF), density, hydrogen bond count (HB), and contact numbers are examined across the simulation trajectories. The most important elements in the stability of the systems under examination are found to be stacking π-π and HB interactions. It was confirmed by a significant value of total interaction energy for BPA/MOF-OX (- 338.21 kJ mol-1) and BPA/MOF (- 389.95 kJ mol-1) complexes. Evaluation of interaction energies reveals that L-J interaction plays an essential role in the adsorption of food contaminants on the substrates. The free energy values for the stability systems of BPA/MOF and BPA/MOF-OX complexes at their global minima reached about BPA/MOF = - 254.29 kJ mol-1 and BPA/MOF-OX = - 187.62 kJ mol-1, respectively. Nevertheless, this work provides a new strategy for the preparation of a new hierarchical tree-dimensional of the Ga-MOF hybrid material for the adsorption and exclusion of food contaminates and their effect on human health.

Comparative Study on the Proton Conduction Behaviors of Two Acidic Amphiphilic and Hydrophilic Coordination Compounds in Nafion Composite Membranes

The acidic amphiphilic compound H[Co(H2L1)(HL1)(phen)]·3H2O (H4(Co-L1), H3L1 = 5-(3', 5'-dicarboxylphenyl)-pyridine-2-carboxylic, phen = phenanthroline) and the hydrophilic compound [Ni(HL2)(H2O)5]·H2O (H(Ni-L2), H3L2 = 5-(3',5'-dicarboxylphenyl)-pyridine-3-carboxylic) were synthesized via hydrothermal reactions at acidic conditions. The acidity of H4(Co-L1) is stronger than of H(Ni-L2); while the hydrogen bond continuity in H4(Co-L1) extended monodirectionally, which is smaller compared to the three-directional extension observed in H(Ni-L2). The proton conduction behaviors of these two compounds as fillers of Nafion composite membranes have been investigated. The results indicate that the optimal doping amounts of H4(Co-L1) and H(Ni-L2) are 2 and 1%, respectively; the proton conductivities of H4(Co-L1)/Nafion-2 and H(Ni-L2)/Nafion-1 composite membranes are 0.243 and 0.212 S·cm-1, respectively, which are approximately 50.2 and 30.6% higher than that of pure Nafion membrane, respectively. A higher doping amount of H4(Co-L1) can be attributed to its hydrophobic phen ligand, which promotes compatibility with Nafion membrane and reduces aggregation. Hydrogen bond continuity has a more significant effect on proton conductivity than acidity at relatively low doping amounts; conversely, this relationship reverses at relatively high doping amounts.

A stable Mn(II) coordination polymer demonstrating proton conductivity and quantitative sensing of oxytetracycline in aquaculture

The construction and investigation of dual-functional coordination polymers (CPs) with proton conduction and luminescence sensing is of great significance in clean energy and agricultural monitoring fields. In this work, an Mn-based coordination polymer (Mn-CP), namely, [Mn0.5(HL)] (H2L = HOOCC6H4C6H4CH2PO(OH)OCH3), was hydrothermally synthesized. Mn-CP has a one-dimensional (1D) chain structure, in which uncoordinated -COOH groups can serve as potential sites for fluorescence sensing. Moreover, Mn-CP shows good water and pH stabilities, offering the feasibility for proton conduction and sensing applications. Mn-CP displays comparatively high proton conductivity of 1.07 × 10-4 S cm-1 at 368 K and 95% relative humidity (RH), which is promising for proton conduction materials. Moreover, it can serve as a repeatable, highly selective, and visualized fluorescence sensor for detecting oxytetracycline (OTC). More importantly, Mn-CP reveals an amazing quantitative sensing of OTC in actual samples such as seawater, aquaculture freshwater, soil infiltration solutions, and tap water. This work proves the excellent application potential of dual-functional CPs in the field of clean energy and environmental protection, especially for the fluorescence detection of antibiotics in aquaculture systems.

Remarkable water-mediated proton conductivity of two porous zirconium(IV)/hafnium(IV) metal-organic frameworks bearing porphyrinlcarboxylate ligands

Obtaining crystalline materials with high structural stability as well as super proton conductivity is a challenging task in the field of energy and material chemistry. Therefore, two highly stable metal-organic frameworks (MOFs) with macro-ring structures and carboxylate groups, Zr-TCPP (1) and Hf-TCPP (2) assembled from low-toxicity as well as highly coordination-capable Zr(IV)/Hf(IV) cations and the multifunctional linkage, meso-tetra(4-carboxyphenyl)porphine (TCPP) have attracted our strong interest. Note that TCPP as a large-size rigid ligand with high symmetry and multiple coordination sites contributes to the formation of the two stable MOFs. Moreover, the pores with large sizes in the two MOFs favor the entry of more guest water molecules and thus result in high H2O-assisted proton conductivity. First, their distinguished structural stabilities covering water, thermal and chemical stabilities were verified by various determination approaches. Second, the dependence of the proton conductivity of the two MOFs on temperature and relative humidity (RH) is explored in depth. Impressively, MOFs 1 and 2 demonstrated the optimal proton conductivities of 4.5 × 10-4 and 0.78 × 10-3 S·cm-1 at 100 °C/98 % RH, respectively. Logically, based on the structural information, gas adsorption/desorption features, and activation energy values, their proton conduction mechanism was deduced and highlighted.

Icing on the Cake: Imidazole-Anchored Strategy To Enhance the Proton Conductivity of Two Isostructural Ce(IV)/Hf(IV) Metal-Organic Frameworks

In the field of proton conduction, the acquisition of crystalline metal-organic frameworks (MOFs) with high stability and ultrahigh proton conductivity has been of great research value and is worth continuous exploration. Here, we greenly synthesized a three-dimensional porous MOF (MOF-801-Ce) by using [(NH4)2Ce(NO3)6 and fumaric acid as starting materials and solvothermally synthesized Hf-UiO-66-NO2 by using HfCl4 and 2-nitroterephthalic acid as starting materials. A series of measurements have shown that both MOFs exhibit good water stability, acid-base stability, and thermal stability and demonstrate outstanding proton conductivity. At 100 °C and 98% relative humidity (RH), the proton conductivities (σ) could be 2.59 × 10-3 S·cm-1 for MOF-801-Ce and 0.89 × 10-3 S·cm-1 for Hf-UiO-66-NO2. To pursue higher proton conductivity, we further adopted the evaporation approach to encapsulate imidazole molecules in the pores of the two compounds, achieving the imidazole-encapsulated MOFs, Im@MOF-801-Ce and Im@Hf-UiO-66-NO2. As expected, their σ values were significantly boosted by almost an order of magnitude up to 10-2 S·cm-1. Finally, their proton-conductive mechanisms were explored in light of the structural information, gas adsorption/desorption, and other tests. The outstanding structural stability of these MOFs and their durability of the proton conduction capability manifested that they have great promise in electrochemical fields.