Experimental mixture design as a tool for the synthesis of antimicrobial selective molecularly imprinted monodisperse microbeads

Preparation of molecularly imprinted polymer for the specific adsorption and selective extraction of alkylresorcinols from whole wheat flour

Alkylresorcinols are important biomarkers for evaluating whole wheat foods. However, their structures encompass a broad spectrum of homologs, making isolating and analyzing individual alkylresorcinol notably challenging. Herein, we synthesized highly selective molecularly imprinted polymers (MIPs) utilizing a facile and cost-effective precipitation polymerization method and 5-heneicosylresorcinol (ARC21:0) as the template molecule. Various crucial preparation parameters were systematically optimized, such as different porogens, functional monomers, imprinting ratios, and polymerization time. The polymers were characterized through scanning electron microscopy and Fourier transform infrared spectroscopy, and their adsorption performances were thoroughly evaluated. MIPs exhibited a notably enhanced adsorption capacity compared with that of non-imprinted polymers, reaching an optimal adsorption amount of 71.75 mg·mL-1 and imprinting factor of 2.02. Altogether, the synthesized MIPs showed superior affinity and selectivity for ARC21:0, as confirmed by their selective extraction, suggesting their potential applications in the analysis, separation, and monitoring of ARC21:0 in whole wheat foods.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Microsphere Polymers in Molecular Imprinting: Current and Future Perspectives

Molecularly imprinted polymers (MIPs) are specific crosslinked polymers that exhibit binding sites for template molecules. MIPs have been developed in various application areas of biology and chemistry; however, MIPs have some problems, including an irregular material shape. In recent years, studies have been conducted to overcome this drawback, with the synthesis of uniform microsphere MIPs or molecularly imprinted microspheres (MIMs). The polymer microsphere is limited to a minimum size of 5 nm and a molecular weight of 10,000 Da. This review describes the methods used to produce MIMs, such as precipitation polymerisation, controlled/'Living' radical precipitation polymerisation (CRPP), Pickering emulsion polymerisation and suspension polymerisation. In addition, some green chemistry aspects and future perspectives will also be given.

Environmental Stability of Plasmonic Biosensors Based on Natural versus Artificial Antibody

Plasmonic biosensors based on the refractive index sensitivity of localized surface plasmon resonance (LSPR) are considered to be highly promising for on-chip and point-of-care biodiagnostics. However, most of the current plasmonic biosensors employ natural antibodies as biorecognition elements, which can easily lose their biorecognition ability upon exposure to environmental stressors (e.g., temperature and humidity). Plasmonic biosensors relying on molecular imprints as recognition elements (artificial antibodies) are hypothesized to be an attractive alternative for applications in resource-limited settings due to their excellent thermal, chemical, and environmental stability. In this work, we provide a comprehensive comparison of the stability of plasmonic biosensors based on natural and artificial antibodies. Although the natural antibody-based plasmonic biosensors exhibit superior sensitivity, their stability (temporal, thermal, and chemical) was found to be vastly inferior to those based on artificial antibodies. Our results convincingly demonstrate that these novel classes of artificial antibody-based plasmonic biosensors are highly attractive for point-of-care and resource-limited conditions where tight control over transport, storage, and handling conditions is not possible.

Molecularly Imprinted Polymers for the Selective Extraction of Bisphenol A and Progesterone from Aqueous Media

This paper describes the development of a novel sorbent for selective extraction of endocrine disruptors (EDs) from aqueous media. The main goal was to obtain sufficient molecularly imprinted polymers (MIPs) for selective detection, preconcentration, and extraction of EDs such as bisphenol A (BPA) and progesterone (PG). Series of MIPs and their analogues, non-molecularly imprinted polymers (NIPs), were synthesised following a non-covalent imprinting strategy based on radical polymerisation. Sets of synthesis were performed in order to optimise variables of the polymerisation including solvent, cross-linker, and template ratio. The retention capacity of MIPs was determined using HPLC in the range of 33.3% to 96.6% and 32.5% to 96% for BPA and PG, respectively. The adsorption mechanism was studied by isothermal and kinetic assays. The kinetic analysis showed a high retention capacity within 15 min of contact. The polymer yield was obtained in the range of 30% to 100%. Additionally, there was no significant cross-reactivity observed upon testing MIPs with structural analogues and other endocrine disruptors instead of target molecules. The results also revealed the high importance of different concentrations of cross-linker and solvent during the polymerisation. Firstly, the pre-organisation of complementary functional groups, which were present in the polymerisation mixture, and secondly, selective cavity formation for target molecules.

Molecularly Imprinted Biodegradable Nanoparticles

Biodegradable polymer nanoparticles are promising carriers for targeted drug delivery in nanomedicine applications. Molecu- lar imprinting is a potential strategy to target polymer nanoparticles through binding of endogenous ligands that may promote recognition and active transport into specific cells and tissues. However, the lock-and-key mechanism of molecular imprinting requires relatively rigid cross-linked structures, unlike those of many biodegradable polymers. To date, no fully biodegradable molecularly imprinted particles have been reported in the literature. This paper reports the synthesis of a novel molecularly- imprinted nanocarrier, based on poly(lactide-co-glycolide) (PLGA) and acrylic acid, that combines biodegradability and molec- ular recognition properties. A novel three-arm biodegradable cross-linker was synthesized by ring-opening polymerization of glycolide and lactide initiated by glycerol. The resulting macromer was functionalized by introduction of end-functions through reaction with acryloyl chloride. Macromer and acrylic acid were used for the synthesis of narrowly-dispersed nanoparticles by radical polymerization in diluted conditions in the presence of biotin as template molecule. The binding capacity of the imprinted nanoparticles towards biotin and biotinylated bovine serum albumin was twentyfold that of non-imprinted nanoparti- cles. Degradation rates and functional performances were assessed in in vitro tests and cell cultures, demonstrating effective biotin-mediated cell internalization.

Preparation of Molecularly Imprinted Microspheres by Precipitation Polymerization

Molecularly imprinted polymers (MIPs) gained an expansively growing interest in the past few decades. After an initial, explorative period of preparing MIPs exclusively with bulk polymerization, new polymer synthesis routes have been adapted to overcome the drawbacks of the traditional method. Among these the most appealing is precipitation polymerization that results in nano- and microspheres with narrow size distribution and makes the production of MIPs more straightforward. Here, we describe a precipitation polymerization protocol for a common small molecule template, propranolol that is carried out in the conventional way, in dilute monomer solution. Moreover, a modified precipitation polymerization protocol from concentrated monomer solution is presented for a diclofenac imprinted polymer which makes the synthesis even more versatile and circumvents the disadvantages of the dilute solution conditions.

Precipitation polymerization: a versatile tool for preparing molecularly imprinted polymer beads for chromatography applications

Minireview on recent advances of application of MIPs prepared by precipitation polymerization for recognition of target analytes in complex matrices.