Preparation of lysozyme-imprinted mesoporous Zr-based metal-organic frameworks with remarkable specific recognition

The development of high-performance protein-imprinted materials remains challenging due to defects concerning high mass transfer resistance and non-specific binding, which are crucial for protein purification and enrichment. In this paper, lysozyme-imprinted mesoporous Zr-based MOF (mesoUiO-66-NH2@MIPs) with specific and selective recognition of lysozyme (Lyz) were prepared by surface imprinting technology. In particular, the excellent hydrophilicity mesoporous MOFs (mesoUiO-66-NH2) with a pore size of 10 nm was prepared as a carrier for Lyz immobilization by an auxiliary modulation strategy to regulate the microporous structure of UiO-66-NH2 with the propionic acid solution, enabling massive loading of the macromolecular protein Lyz. The mesoUiO-66-NH2@MIPs reached a maximum saturation adsorption of 206.54 mg g-1 on Lyz in 20 min at 25 °C with an imprinting factor of 2.57 and selection factors of 2.02, 2.34, and 2.45 for cytochrome c (Cyt c), bovine serum albumin (BSA) and bovine hemoglobin (BHb), respectively. More importantly, the mesoUiO-66-NH2@MIPs could specifically recognize Lyz from the mixed protein system. The adsorption capacity of Lyz could still reach 78.55% after 5 cycles with good cyclic regeneration performance. This provides a new research option for developing and applying novel porous MOF in biomolecule imprinting technology and the specific separation of biomolecules.

A cellulose-based intelligent temperature-sensitive molecularly imprinted aerogel reactor for specific recognition and enrichment of ursolic acid

In this article, thermosensitive molecularly imprinted polymer and composite aerogel were combined for the first time to create an intelligent temperature-responsive aerogel reactor to effectively enrich ursolic acid (UA). Because aerogel carrier had a higher specific surface area and higher porosity compared to other carriers, the ursolic acid molecularly imprinted intelligent temperature responsive aerogel reactor (ITR&AR(G570)&UA-MIP) demonstrated a higher adsorption capacity for UA. More notably, ITR&AR(G570)&UA-MIP have the extraordinary capacity to spontaneously adsorb-desorb target molecule UA by regulating the reaction temperature. The ratio of the target molecule UA to the functional monomer and crosslinker in the grafting process and external influences had a major impact on how ITR&AR(G570)&UA-MIP were prepared overall. When the molar ratio of UA to 4-VP was 1:8, the weight ratio between ITR&AR(G570)&UA-MIP and EGDMA/DVB was 1:2:10, the reaction temperature was 60 °C, and the ambient pH = 6, the material showed the best adsorption capacity, reaching a peak of about 70 mg g-1. After researching the appropriate synthesis conditions, ITR&AR(G570)&UA-MIP were applied to lingonberry (Vaccinium Vitis-Idaea L.) berry extracts in this work. The outcomes show that this technique provides a new, intelligent, temperature-controlled adsorption material for the solid-phase extraction of triterpenoid acids in natural products, with good specific adsorption performance for the target molecule UA.

Selective determination of cuprous ion in copper dissolving solution based on bathocuproine-modified expanded graphite electrode

The presence of cuprous ions in the copper-dissolving solution significantly affects the microstructure of copper plated surface. Fewer quantitative analyses of cuprous ions in the copper foil productive process had rarely been involved so far. In the present work, a novel electrochemical sensor of the bathocuproine (BCP) modified expanded graphite (EG) electrode was developed for the selective determination of cuprous ions. EG has a large surface area, good adsorption, and excellent electrochemical performance which remarkably promoted analytical sensitivity. Meanwhile, the selective determination of the BCP-EG electrode for cuprous ions in the coexistence of ten thousand times of copper ions have been achieved on the benefit of the special coordination of BCP to cuprous ions. In the coexistence of 50 g/L copper ions, the analytical performance of the BCP-EG electrode for the determination of cuprous ions had been examined. The results represented a wide detection range of cuprous ions in the range of 1.0 μg/L-5.0 mg/L, with a low detection limit of 0.18 μg/L (S/N = 3) and the BCP-EG electrode has great selectivity to cuprous ions in presence of various interferences. The analytical selectively for cuprous ions supported by the proposed electrode would be a potential analytical tool for quality improvement in electrolytic copper foil manufacturing.

Preparation of chitin/MXene/poly(L-arginine) composite aerogel spheres for specific adsorption of bilirubin

Currently, hemoperfusion is clinically the most rapid and effective treatment for removing toxins from the blood. The core of hemoperfusion is the sorbent inside the hemoperfusion device. Due to the complex composition of the blood, adsorbents tend to adsorb substances such as proteins in the blood (non-specific adsorption) while adsorbing toxins. Hyperbilirubinemia is caused by excessive levels of bilirubin in the human blood, causing irreversible damage to the patient's brain and nervous system, and even leading to death. High adsorption and high biocompatibility adsorbents with specific bilirubin adsorption are urgently needed to treat hyperbilirubinemia. Herein, poly(L-arginine) (PLA) which can specifically adsorb bilirubin, was introduced into chitin/MXene (Ch/MX) composite aerogel spheres. Ch/MX/PLA prepared by supercritical CO₂ technology had higher mechanical properties than Ch/MX and can withstand 50,000 times its own weight. The in vitro simulated hemoperfusion test showed that the adsorption capacity of Ch/MX/PLA was as high as 596.31 mg/g, which was 15.38 % higher than that of Ch/MX. Binary and ternary competitive adsorption tests showed that Ch/MX/PLA also had good adsorption capacity in the presence of a variety of interfering molecules. In addition, hemolysis rate testing and CCK-8 testing confirmed that Ch/MX/PLA had better biocompatibility and hemocompatibility. Ch/MX/PLA can meet the required properties of clinical hemoperfusion sorbents and has the ability to produce mass production. It has good application potential in the clinical treatment of hyperbilirubinemia.

Facile and selective separation of anthraquinones by alizarin-modified iron oxide magnetic nanoparticles

Anthraquinones are widely distributed in higher plants and possess broad biological activities. The conventional separation procedures for isolating anthraquinones from the plant crude extracts require multiple extraction, concentration, and column chromatography steps. In this study, we synthesized three alizarin (AZ)-modified Fe₃O₄ nanoparticles (Fe₃O₄@AZ, Fe₃O₄@SiO₂-AZ, and Fe₃O₄@SiO₂-PEI-AZ) by thermal solubilization method. Fe₃O₄@SiO₂-PEI-AZ showed strong magnetic responsiveness, high methanol/water dispersion, good recyclability, and high loading capacity for anthraquinones. To evaluate the feasibility of using Fe₃O₄@SiO₂-PEI-AZ for separating various aromatic compounds, we employed molecular dynamics simulations to predict the adsorption/desorption effects of PEI-AZ for various aromatic compounds in different methanol concentrations. The results showed that the anthraquinones could be efficiently separated from the monocyclic and bicyclic aromatic compounds by adjusting the methanol/water ratio. The Fe₃O₄@SiO₂-PEI-AZ nanoparticles were then used to separate the anthraquinones from the rhubarb extract. At 5% methanol, all the anthraquinones were adsorbed by the nanoparticles, thus allowing their separation from other components in the crude extract. Compared with the conventional separation methods, this adsorption method has the advantages of high adsorption specificity, simple operation, and solvent saving. This method sheds light on the future application of functionalized Fe₃O₄ magnetic nanoparticles to selectively separate desired components from complex plant and microbial crude extracts.

Enhanced photoelectrocatalytic performance for degradation of dimethyl phthalate over well-designed 3D hierarchical TiO2/Ti photoelectrode coupled dual heterojunctions

A novel A/R-TiO₂ NSs/NRs photoelectrode was constructed through electrodeposition of anatase TiO₂ nanosheets (A-TiO₂ NSs) with highly exposed {001} facet onto the 1D upright rutile TiO₂ nanorods (R-TiO₂ NRs). At first, A/R-TiO₂ NSs/NRs exhibited enhanced adsorption of dimethyl phthalate (DMP) due to the specific recognition between Lewis acid sites of {001} facet and Lewis basic DMP. NH₃-TPD and Py-IR revealed that the Lewis acidity on the {001} facet of A-TiO₂ NSs was much stronger than that of R-TiO₂ NRs, demonstrating superior adsorption capacity to DMP. DFT theoretical calculations coupled with in-situ ATR-FTIR spectra were performed to investigate the binding adsorption behavior of DMP on A/R-TiO₂ NSs/NRs. Secondly, the rapid separation of excited charges and strong oxidation of h⁺ were achieved by the synergistic effect of dual heterojunctions (A/R "phase heterojunction" and {111}/{110} "facet heterojunction"). The A/R-TiO₂ NSs/NRs exhibited 100% degradation efficiency for the target pollutant DMP within 3 h, whose rate constant (k) was 18.02 × 10^-3 min^-1, 2.16 times that of pure R-TiO₂ NRs. In real wastewater application, A/R-TiO₂ NSs/NRs achieved 93.8% elimination of DMP during 4 h and preserved excellent stability after 5 cycles, promising a wide-range of applications in water environment remediation.

Fabrication of metal coordination-synergistic magnetic imprinted microspheres based on ligand-free Fe3O4-Cu for specific recognition of bovine hemoglobin

In this work, a synergistic imprinting strategy combined with metal coordination based on ligand-free Fe₃O₄-Cu was proposed to fabricate molecularly imprinted polymers (MIPs) for the recognition and isolation of bovine hemoglobin (BHb) specifically in biological samples. Copper doped magnetic microspheres prepared solvothermally in a one-pot pathway act as both magnetic core and metal affinity substrate. Upon anchoring BHb to Fe₃O₄-Cu through metal coordination, the imprinted layer was formed via dopamine self-polymerization. Profiting from the synergistic effect, the obtained imprinted microspheres exhibited an enhanced adsorption performance with the adsorption capacity of 400.86 mg g^-1, imprinting factor of 11.88, selectivity coefficient above 5.8, superior to most of other reported BHb-MIPs. Furthermore, kinetic adsorption analyses pointed to a chemisorption-limited process as described by the pseudo-second-order model, and the isothermal adsorption analyses implied monolayer adsorption, as described by the Langmuir model. In addition, the resultant magnetic MIPs can be used at least six adsorption-desorption cycles without re-incubation in the metallic salt solution, avoiding secondary environmental pollution. Furthermore, the well-defined materials showed selectivity both in individual protein samples and bovine serum, providing a promising potential in bioseparation.

Efficient photocatalytic removal of phthalates easily implemented over a bi-functional {001}TiO2 surface

It is stubborn to remove the lowly concentrated phthalic acid esters (PAEs) that usually coexist with other highly concentrated but low-toxic pollutants in municipal sewage. Herein, we report a novel strategy for completely removing the PAEs over a bi-functional {001}TiO₂ surface (with highly exposed {001} facet), which not only serve as functional sites to specifically adsorb the target PAEs pollutants, but also contribute to an enhanced oxidation ability. The adsorption behavior of PAEs on {001}TiO₂ is analyzed deeply through kinetic experiments combining with in situ ATR-FTIR spectroscopy and theoretical calculations. The results reveal that the adsorption capacities of PAEs on {001}TiO₂ are about 4-5 times higher than that on TiO₂, both of which follow the pseudo-second-order and Langmuir model. This is mainly attributed to the interfacial Lewis Acid-Base Pair between {001} facet Ti_5c sites and CO of PAEs. Benefitting from the specific adsorption capability toward target pollutant and enhanced oxidation ability of {001} facets, nearly 100% of DMP or DEP in simulated wastewater can be eliminated by {001}TiO₂ within 2 h illumination, and the relevant degradation rate constants (k) (3.67 h^-1 for DMP and 2.19 h^-1 for DEP) are 5.73 and 3.08 folds higher than that of pure TiO₂, respectively. In the application of municipal wastewater, nearly 76% of DMP and 85% DEP can be eliminated by {001}TiO₂ within 2 h illumination, which are nearly 3-6 fold higher than that of pure TiO₂.

Kinetic and thermodynamic studies of cinnamycin specific-adsorption on PE-Included-Membranes using surface plasmon resonance

The binding of the cinnamycin on the biomimetic membrane was studied with respect to time using the surface plasmon resonance(SPR). The membrane was composed of the inner layer tethered on the gold surface and the outer layer formed on the inner layer, which was at the desired ratio of dioleoylphosphatidylethanolamine(DOPE) to dioleoylphosphatidyl- choline(DOPC). On the bilayer, the cinnamycin solution was injected and showed different behavior of the binding with respect to time up on its concentration. For kinetic analysis, the behavior was converted to the coverage fraction with respect to time, which was ratio to the saturated response of 5 μM cinnamycin solution. The fraction change with respect to time was function of the available-site, which was eventually the subtraction of the fraction from one. With the fitting of the first order of the available site, the rate constant was acquired into 6∼7 × 10^-3 s^-1. Furthermore, the reciprocals of the fraction and the concentration were fitted with the Langmuir adsorption isotherm. From the fitting, the equilibrium constant was between 1 × 10⁷ and 5 × 10⁷ M^-1.

β-Cyclodextrin capped graphene-magnetite nanocomposite for selective adsorption of Bisphenol-A

Beta-cyclodextrin capped Graphene-magnetite (G-Fe₃O₄-BCD) nanocomposite was synthesized by ethylenediamine conjugation and used as an adsorbent for selective removal of Bisphenol-A (BPA) in water. Characterization of nanocomposite revealed BCD conjugated to Fe₃O₄ nanoparticles (30-40nm) embedded on graphene. Adsorption process followed Langmuir model and pseudo second order kinetics with an adsorption capacity of 59.6mg/g. It was found to be highly favourable physisorption and endothermic process as indicated by ΔG° (-3.36kJ/mol) and ΔH° (2.08kJ/mol) values at ambient temperatures. The nanocomposite was highly specific towards BPA compared to its analogs, largely driven by host-guest interaction between BCD and BPA. Nanocomposite had a high magnetization of 97emu/g with superparamagnetic property at room temperature which helps in faster separation using an external magnetic field. Nanocomposite can be regenerated with methanol and can be reused without much loss in adsorption efficiency (<10%) after 6 cycles. It has huge potential and application in selective adsorption of target molecules.

Specific adsorption of cadmium on surface-engineered biocompatible organoclay under metal-phenanthrene mixed-contamination

Bioremediation of polycyclic aromatic hydrocarbons (PAHs) is extremely challenging when they coexist with heavy metals. This constrain has led to adsorption-based techniques that help immobilize the metals and reduce toxicity. However, the adsorbents can also non-selectively bind the organic compounds, which reduces their bioavailability. In this study we developed a surface-engineered organoclay (Arquad^® 2HT-75-bentonite-palmitic acid) which enhanced bacterial proliferation and adsorbed cadmium, but elevated phenanthrene bioavailability. Adsorption models of single and binary solutes revealed that the raw bentonite adsorbed cadmium and phenanthrene non-selectively at the same binding sites and sequestrated phenanthrene. In contrast, cadmium selectively bound to the deprotonated state of carboxyl groups in the organoclay and phenanthrene on the outer surface of the adsorbent led to a microbially congenial microenvironment with a higher phenanthrene bioavailability. This study provided valuable information which would be highly important for developing a novel clay-modulated bioremediation technology for cleaning up PAHs under mixed-contaminated situations.

Bioavailability of heavy metals in soils: definitions and practical implementation--a critical review

Worldwide regulatory frameworks for the assessment and remediation of contaminated soils have moved towards a risk-based approach, taking contaminant bioavailability into consideration. However, there is much debate on the precise definition of bioavailability and on the standardization of methods for the measurement of bioavailability so that it can be reliably applied as a tool for risk assessment. Therefore, in this paper, we reviewed the existing definitions of heavy metal bioavailability in relation to plant uptake (phytoavailability), in order to better understand both the conceptual and operational aspects of bioavailability. The related concepts of specific and non-specific adsorption, as well as complex formation and organic ligand affinity were also intensively discussed to explain the variations of heavy metal solubility and mobility in soils. Further, the most frequently used methods to measure bioavailable metal soil fractions based on both chemical extractions and mechanistic geochemical models were reviewed. For relatively highly mobile metals (Cd, Ni, and Zn), a neutral salt solution such as 0.01 M CaCl2 or 1 M NH4NO3 was recommended, whereas a strong acid or chelating solution such as 0.43 M HNO3 or 0.05 M DTPA was recommended for strongly soil-adsorbed and less mobile metals (Cu, Cr, and Pb). While methods which assessed the free metal ion activity in the pore water such as DGT and DMT or WHAM/Model VI, NICA-Donnan model, and TBLM are advantageous for providing a more direct measure of bioavailability, few of these models have to date been properly validated.

On the photocatalytic reduction of MTT tetrazolium salt on the surface of TiO2 nanoparticles: Formazan production kinetics and mechanism

HYPOTHESIS

The MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium-bromide] cell cytotoxicity indicator is photocatalytically reduced on the surface of TiO2 nanoparticles in phosphate-buffered-saline (PBS) environment. We hypothesize that specific phosphate adsorption may be used to modulate the efficiency of the TiO2-MTT reaction through colloidal and semiconductor-liquid interface processes.

EXPERIMENTS

The TiO2-MTT reaction kinetics was studied in PBS, with respect to photocatalyst and MTT concentrations and irradiation wavelength. The effects of PBS and electron scavengers (Fe(3+) ions) on reaction efficiency and the role of colloidal surface charge in the photocatalytic process were investigated. The structural and spectroscopic characteristics of relevant TiO2-formazan systems were studied by X-ray diffraction, transmission electron microscopy and IR-spectroscopy.

FINDINGS

The reaction was pseudo-first order with respect to photocatalyst and showed a negative and fractional partial order with respect to MTT. Formazan production rates were directly proportional to radiation wavelength and TiO2 concentration and inversely proportional to the MTT initial concentration. The addition of Fe(3+) ions, as well as the absence of PBS, induced strong reaction inhibition. Reaction efficiency and catalyst Zeta potential were enhanced by Na2HPO4 (PBS component) and showed a maximum around the phosphate concentration 0.005 M. Structural/spectroscopic characterization confirmed the formation of amorphous MTT-formazan on the surface of TiO2 and the TiO2-phosphate binding.