Insight into D-A-π-A Structured Sensitizers: A Promising Route to Highly Efficient and Stable Dye-Sensitized Solar Cells

The influence of the position and quantity of thiophene or acetylene groups on the photoelectric properties of dye-sensitized solar cells

To investigate the influence of the position and quantity of thiophene or acetylene groups on the photoelectric properties of dye-sensitized solar cells (DSSCs), density functional theory (DFT) were employed to simulate five zinc porphyrin dye molecules (T-3, T-3-D, T-3-A, T-3-AD, and T-3-ace). The optimized geometry indicated that T-3-ace possessed superior planar properties, attributed to incorporating the acetylene groups, facilitating the charge transfer process. The lower lowest unoccupied molecular orbital (LUMO) energy levels of T-3-ace and T-3-D suggested that introducing thiophene or acetylene groups on the donor side enhanced the electron absorption capability of the dyes. The analysis of optical properties revealed that the incorporation of thiophene or acetylene groups on the donor side (T-3-D or T-3-ace) exhibited a more prominent red shift and a broader absorption range, which was beneficial for promoting electron excitation and optical properties. The low reorganization energy suggested these two molecules have better structural stability during photoexcitation. The prediction of photoelectric conversion efficiency (PCE) showed that introducing thiophene was beneficial for improving the PCE, with the most significant effect observed when introducing thiophene groups on the donor side (T-3-D). The T-3-ace demonstrated the highest maximum short circuit current density Jmax; however, the lower electron injection efficiency (φinject) led to a lower short circuit current density JSC and consequently a lower PCE. This work is conducive to providing valuable insights into the molecular structure of zinc porphyrin dyes and their photoelectric properties.

New Chemo-, Regio- and Stereoselective Reactions and Methods in Organic Synthesis

The Special Issue "New Chemo-, Regio- and Stereoselective Reactions and Methods in Organic Synthesis" collects eight articles that have developed advanced approaches to the chemo-, regio- and stereoselective synthesis of novel important compounds, scaffolds, synthons, and practically valuable products [...].

Umbrella-Shaped m-Terphenyls for Highly π-Extended Planar Dyes toward High-Performance Dye-Sensitized Solar Cells

Porphyrin dyes with π-extended structures, particularly those with aromatic fused designs, have garnered considerable attention as efficient sensitizers for dye-sensitized solar cells (DCCSs). However, their photovoltaic performance has often been limited due to high aggregation tendencies caused by strong π-π interactions and charge recombination processes. Since m-terphenyls can be used as effective sterically protecting groups, the incorporation of umbrella-shaped m-terphenyls on the top of porphyrin dyes could provide an effective approach to unlock the full potential of highly π-extended porphyrin dyes. In this study, we report new fused porphyrin dyes, T-Ph, T-tBuPh, TT-Ph, and TT-tBuPh, introducing m-terphenyl groups. This innovative design ensures both blocking effects on dye aggregation on TiO2 and charge recombination against redox shuttles. Under the optimized conditions, DSSCs using thiophene-fused porphyrins T-Ph and T-tBuPh achieved a remarkable power conversion efficiency (PCE) of 11.5%. This is high compared to those with reference porphyrins, GY50 possessing steric hindrance due to the orthogonal orientation of a V-shaped diarylamino group to the porphyrin plane and DfZnP without the bulky umbrella-shaped m-terphenyl, demonstrating the proof of our concept. More importantly, the cosensitized DSSC using T-tBuPh and the complementary dye XY1B afforded the highest PCE of 12.3% ever reported for DSSCs with fused porphyrin dyes. This demonstrates that the "umbrella-shaped m-terphenyl" design is an attractive methodology for enhancing the photovoltaic performance of DSSCs with highly π-extended planar dyes, especially fused porphyrin dyes.

Suppression of Charge Recombination by Vertical Arrangement of A Donor Moiety on Flat Planar Dyes for Efficient Dye-Sensitized Solar Cells

In dye-sensitized solar cells (DSSCs), flat planar dyes (e. g., highly light-harvesting porphyrins and corroles) with multiple anchoring groups are known to adopt a horizontal orientation on TiO2 through the multiple binding to TiO2. Due to the strong electronic coupling between the dye and TiO2, fast charge recombination between the oxidized dye and an electron in TiO2 occurs, lowering the power conversion efficiency (η). To overcome this situation, an additional donor moiety can be placed on top of the planar dye on TiO2 to slow down the undesirable charge recombination. Here we report the synthesis and photovoltaic properties of a triarylamine (TAA)-tethered gold(III) corrole (TAA-AuCor). The DSSC with TAA-AuCor using iodine redox shuttle exhibited the highest η-value among corrole-based DSSCs, which is much higher than that with the reference AuCor. The transient absorption spectroscopies clearly demonstrated that fast electron transfer from the TAA moiety to the corrole radical cation in TAA-AuCor competes with the undesirable charge recombination to generate long-lived charge separated state TAA⋅+-Cor/TiO2⋅- efficiently. Consequently, the introduction of the TAA moiety enhanced the η-value remarkably, demonstrating the usefulness of our new concept to manipulate charge-separated states toward highly efficient DSSCs.

Recent advances in the approaches for improving the photovoltaic performance of porphyrin-based DSSCs

Among other photovoltaic techniques including perovskite solar cells and organic solar cells, dye-sensitized solar cells (DSSCs) are considered to be a potential alternative to conventional silicon solar cells. Porphyrins are promising dyes with the properties of easy modification and superior light-harvesting capability. However, porphyrin dyes still suffer from a number of unfavorable aspects, which need to be addressed in order to improve the photovoltaic performance. This feature article briefly summarizes the recent progress in improving the Voc and Jsc of porphyrin-based DSSCs in terms of molecular engineering by modifying the porphyrin macrocycle, donor and acceptor moieties of the porphyrin dyes, coadsorption of the porphrin dyes with bulky coadsorbents like chenodeoxycholic acid (CDCA), and cosensitization of the porphyrin dyes with metal-free organic dyes. Notably, concerted companion (CC) dyes are described in detail, which have been constructed by linking a porphyrin dye subunit and a metal-free organic dye subunit with flexible alkoxy chains to achieve panchromatic absorption and concerted enhancement of Voc and Jsc. In one sentence, this article is expected to provide further insights into the development of high performance DSSCs through the design and syntheses of efficient porphyrin dyes and CC dyes in combination with device optimization to achieve simultaneously elevated Voc and Jsc, which may inspire and promote further progress in the commercialization of the DSSCs.

Screening novel candidates of ZL003-based organic dyes for dye-sensitized solar cells by modifying auxiliary electron acceptors: A theoretical study

In this work, a series of ZL003-based free-metal sensitizers with the donor-acceptor-π- conjugated spacer-acceptor (D-A-π-A) structure were designed by modifying auxiliary electron acceptors for the potential application in dye-sensitized solar cells. The energy levels of frontier molecular orbitals, absorption spectra, electronic transition, and photovoltaic parameters for all studied dyes were systematically evaluated using density functional theory (DFT)/time-dependent DFT calculations. Results illustrated that thienopyrazine (TPZ), selenadiazolopyridine (SDP), and thiadiazolopyridine (TDP) are excellent electron acceptors, and dye sensitizers functionalized by these acceptors have smaller HOMO-LUMO gaps, obviously red-shifted absorption bands and stronger light harvesting. The present study revealed that the photoelectric conversion efficiency (PCE) of ZL003 is around 13.42 % with a JSC of 20.21 mA·cm-2, VOC of 966 mV and FF of 0.688 under the AM 1.5G sun exposure, in good agreement with its experimental value (PCE = 13.6 ± 0.2 %, JSC = 20.73 ± 0.20 mA·cm-2, VOC = 956 ± 5 mV, and FF = 0.685 ± 0.005.). With the same procedure, the PCE values for M4, M6, and M7 were estimated to be as high as 19.93 %, 15.38 %, and 15.80 % respectively. Hence, these three dyes are expected to be highly efficient organic sensitizers applied in practical DSSCs.

Control of Bandgaps and Energy Levels in Water-Soluble Discontinuously Conjugated Polymers through Chemical Modification

Bandgap and energy levels are crucial for developing new electronic and photonic devices because photoabsorption is highly dependent on the bandgap. Moreover, the transfer of electrons and holes between different materials depends on their respective bandgaps and energy levels. In this study, we demonstrate the preparation of a series of water-soluble discontinuously π-conjugated polymers through the addition-condensation polymerization of pyrrole (Pyr), 1,2,3-trihydroxybenzene (THB) or 2,6-dihydroxytoluene (DHT), and aldehydes, including benzaldehyde-2-sulfonic acid sodium salt (BS) and 2,4,6-trihydroxybenzaldehyde (THBA). To control the energy levels of the polymers, varying amounts of phenols (THB or DHT) were introduced to alter the electronic properties of the polymer structure. The introduction of THB or DHT into the main chain results in discontinuous conjugation and enables the control of both the energy level and bandgap. Chemical modification (acetoxylation of phenols) of the polymers was employed to further tune the energy levels. The optical and electrochemical properties of the polymers were also investigated. The bandgaps of the polymers were controlled in the range of 0.5-1.95 eV, and their energy levels could also be effectively tuned.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its Bromo Derivatives: Molecular Structure and Reactivity

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) (isoBBT) is a new electron-withdrawing building block that can be used to obtain potentially interesting compounds for the synthesis of OLEDs and organic solar cells components. The electronic structure and delocalization in benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) were studied using X-ray diffraction analysis and ab initio calculations by EDDB and GIMIC methods and were compared to the corresponding properties of benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole (BBT). Calculations at a high level of theory showed that the electron affinity, which determines electron deficiency, of isoBBT was significantly smaller than that of BBT (1.09 vs. 1.90 eV). Incorporation of bromine atoms improves the electrical deficiency of bromobenzo-bis-thiadiazoles nearly without affecting aromaticity, which increases the reactivity of these compounds in aromatic nucleophilic substitution reactions and, on the other hand, does not reduce the ability to undergo cross-coupling reactions. 4-Bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) is an attractive object for the synthesis of monosubstituted isoBBT compounds. The goal to find conditions for the selective substitution of hydrogen or bromine atoms at position 4 in order to obtain compounds containing a (het)aryl group in this position and to use the remaining unsubstituted hydrogen or bromine atoms to obtain unsymmetrically substituted isoBBT derivatives, potentially interesting compounds for organic photovoltaic components, was not set before. Nucleophilic aromatic and cross-coupling reactions, along with palladium-catalyzed C-H direct arylation reactions for 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), were studied and selective conditions for the synthesis of monoarylated derivatives were found. The observed features of the structure and reactivity of isoBBT derivatives may be useful for building organic semiconductor-based devices.

The impact of aromatic π-spacers and internal acceptors in triphenylamine dyes for DSSCs: A DFT approach

In present work, the influence of internal acceptors and π-spacers on optoelectronic properties for dye-sensitized solar cells (DSSCs) is investigated. The dyes consist of various internal acceptors (A), a triphenylamine donor and π-spacers combined with cyanoacrylic acid acceptor. Density functional theory (DFT) was employed to inspect the dye geometries, charge transport characteristics and electronic excitations. The frontier molecular orbitals (FMOs), highest occupied molecular orbital, lowest unoccupied molecular orbital and HOMO-LUMO energy gap are assisted in the determination of suitable energy levels for electron transfer, electron injection and regeneration of dye. The required photovoltaic parameters like J_SC, ΔG_reg, ΔG_inj, LHE and other associated parameters are presented. The results demonstrate that altering the π-bridge and adding an internal acceptor to the D-π-A scaffold changes the photovoltaic properties and absorption energies. Therefore, the key objective of the current effort is to launch a theoretical groundwork for suitable operational alterations and scheme in creating successful DSSCs.

Copper(ii) and cobalt(iii) Schiff base complexes with hydroxy anchors as sensitizers in dye-sensitized solar cells (DSSCs)

Two Schiff base complexes of copper(ii) and cobalt(iii) having the formulae [CuL₂] (Cu-Sal) and [CoL₃] (Co-Sal) (HL = 2-(((2-hydroxyethyl)imino)methyl)phenol) have been synthesized and characterized microanalytically, spectroscopically and in the case of Cu-Sal using single crystal X-ray diffraction technique. The single crystal X-ray analysis reveals a square planar geometry around Cu(ii) satisfied by phenoxide oxygen and imine nitrogen of the L^- ligand to generate a six membered chelate ring. The solid state structure of Cu-Sal is satisfied by varied intermolecular non-covalent interactions. The nature of these interactions has been addressed with the aid of Hirshfeld surface analysis. Both compounds have been used as sensitizers in TiO₂ based dye sensitized solar cells (DSSCs) and the DSSC experiments revealed that Co-Sal offers better photovoltaic performance in comparison to Cu-Sal. The Co-Sal exhibited a J _sc of 9.75 mA cm^-2 with a V _oc of -0.648 V, incident photon to current conversion efficiency (IPCE) of 57% and η of 3.84%. The relatively better photovoltaic performance of Co-Sal could be attributed to better light absorption and dye loading than that of Cu-Sal.

A Molecularly Tailored Photosensitizer with an Efficiency of 13.2% for Dye-Sensitized Solar Cells

Photosensitizers yielding superior photocurrents are crucial for copper-electrolyte-based highly efficient dye-sensitized solar cells (DSCs). Herein, two molecularly tailored organic sensitizers are presented, coded ZS4 and ZS5, through judiciously employing dithieno[3,2-b:2″,3″-d]pyrrole (DTP) as the π-linker and hexyloxy-substituted diphenylquinoxaline (HPQ) or naphthalene-fused-quinoxaline (NFQ) as the auxiliary electron-accepting unit, respectively. Endowed with the HPQ acceptor, ZS4 shows more efficient electron injection and charge collection based on substantially reduced interfacial charge recombination as compared to ZS5. As a result, ZS4-based DSCs achieve a power conversion efficiency (PCE) of 13.2% under standard AM1.5G sunlight, with a high short-circuit photocurrent density (J_sc ) of 16.3 mA cm^-2 , an open-circuit voltage (V_oc ) of 1.05 V and a fill factor (FF) of 77.1%. Remarkably, DSCs sensitized with ZS4 exhibit an outstanding stability, retaining 95% of their initial PCE under continuous light soaking for 1000 h. It is believed that this is a new record efficiency reported so far for copper-electrolyte-based DSCs using a single sensitizer. The work highlights the importance of developing molecularly tailored photosensitizers for highly efficient DSCs with copper electrolyte.

An optimal molecule-matching co-sensitization system for the improvement of photovoltaic performances of DSSCs

Three biphenyl co-sensitizers (4OBA, 8OBA and 12OBA) with different terminal oxyalkyl chains were synthesized and co-sensitized respectively with the main dye (NP-1) in co-sensitized solar cells (co-DSSCs). The effects of the terminal oxyalkyl chains on the photophysical, electrochemical and photovoltaic properties of the co-DSSCs were systematically investigated. The optimal molecular matching relationship between the co-sensitizers and the main dye was obtained through density functional theory (DFT) calculations. Consequently, 4OBA has the most appropriate three-dimensional (3D) molecular structure, which could not only fill the gap between the large-size dyes but also plays a partial shielding role, inhibiting dye aggregation and electron recombination, therefore yielding the highest power conversion efficiency (PCE) for the co-DSSCs with NP-1@4OBA. This study suggests that adjusting the terminal oxyalkyl chains of the co-sensitizers can be used to enhance the intramolecular charge transfer efficiency and inhibit electron recombination, ultimately improving the photovoltaic performances of the co-DSSCs.

Novel D-A-π-A1 Type Organic Sensitizers from 4,7-Dibromobenzo[d][1,2,3]thiadiazole and Indoline Donors for Dye-Sensitized Solar Cells

Two novel D-A-π-A1 metal-free organic dyes of the KEA series containing benzo[d][1,2,3]thiadiazole (isoBT) internal acceptor, indoline donors fused with cyclopentane or cyclohexane rings (D), a thiophene as a π-spacer, and a cyanoacrylate as an anchor part were synthesized. Monoarylation of 4,7-dibromobenzo[d][1,2,3]thiadiazole by Suzuki-Miyamura cross-coupling reaction showed that in the case of indoline and carbazole donors, the reaction was non-selective, i.e., two monosubstituted derivatives were isolated in each case, whereas only one mono-isomer was formed with phenyl- and 2-thienylboronic acids. This was explained by the fact that heterocyclic indoline and carbazole fragments are much stronger donor groups compared to thiophene and benzene, as confirmed by cyclic voltammetry measurements and calculation of HOMO energies of indoline, carbazole, thiophene and benzene molecules. The structure of monoaryl(hetaryl) derivatives was strictly proven by NMR spectroscopy and X-ray diffraction. The optical and photovoltaic properties observed for the KEA dyes showed that these compounds are promising for the creation of solar cells. A comparison with symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 showed that the asymmetric nature of benzo[d][1,2,3]thiadiazole KEA dyes leads to a hypsochromic shift of the ICT band in comparison with the corresponding benzo[c][1,2,5]thiadiazole isomers. KEA dyes have a narrow HOMO-LUMO gap of 1.5–1.6 eV. Amongst these dyes, KEA321 recorded the best power efficiency (PCE), i.e., 5.17%, which is superior to the corresponding symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 (5.07 and 4.90%).

Accurate predictions of the electronic excited states of BODIPY based dye sensitizers using spin-component-scaled double-hybrid functionals: a TD-DFT benchmark study

The vertical excitation energies of 13 BODIPY based dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals from different DFT rungs. Most TD-DFT results were found to overestimate the excitation energies, and show mean absolute error (MAE) values in the range 0.2-0.5 eV. The dispersion-corrected, spin-component-scaled, double-hybrid (DSD) functionals DSD-BLYP and DSD-PBEP86 were found to have the smallest MAE values of 0.083 eV and 0.106 eV, respectively, which is close to the range of average errors found in the more expensive coupled-cluster methods. Moreover, DSD-BLYP and DSD-PBEP86 functionals show excellent consistency and quality of results (standard deviation = 0.048 eV and 0.069 eV respectively). However, the range separated hybrid (RSH) and the range separated double hybrid (RSDH) functionals were found to provide the best predictability (linear determination coefficient R 2 > 0.97 eV).

Assessment of time-dependent density functionals for the electronic excitation energies of organic dyes used in DSSCs

The absorption spectra modeled as the vertical excitation energies of 13 dye sensitizers used in dye-sensitized solar cells (DSSCs) are benchmarked by means of time-dependent (TD)-DFT, using 36 functionals from different DFT rungs.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Effect of Extending the Conjugation of Dye Molecules on the Efficiency and Stability of Dye-Sensitized Solar Cells

We designed and synthesized two organic dyes (A6 and A10) for dye-sensitized solar cells (DSSCs) by extending the molecular conjugation strategy. The sensitizer A10 was constructed by inserting ethene into our previously reported sensitizer AZ6. The sensitizer A6 was obtained by further substituting the hydrogen of ethene with another donor (D) and π-bridge-acceptor (π-A) segment. The UV-vis spectra and J-V curves showed that the dyes A10 and A6 could effectively facilitate the light-harvesting and photocurrent densities with respect to AZ6. Consequently, the A10-based DSSC achieved an enhanced efficiency (8.54%) with a high photocurrent (18.81 mA cm^-2). Desorption experiments of dyes adsorbed on TiO₂ showed that compared with the monoanchoring dyes AZ6 and A10, the dianchoring configuration effectively strengthened the affinity of dye A6 with the photoanode, making it more difficult to leach from the photoanode. The A6-based DSSC shows outstanding stability, and its overall efficiency could remain 98.0% of its initial value after 3000 h of aging time, exceeding that of its monoanalogue AZ6 (remained 78.3% after 3000 h).

Effect of the Spatial Configuration of Donors on the Photovoltaic Performance of Double D-π-A Organic Dyes

Three double D-π-A sensitizers (A1, A3, and A5) containing different donors (triphenylamine, methoxy-modified triphenylamine, and cyclic thiourea-functionalized triphenylamine) are synthesized to investigate the role of different donors in dye-sensitized solar cells (DSSCs). Detailed investigations of the sensitizers reveal that the spatial characteristics of donor units have a considerable impact on the light-harvesting, electrochemistry, and photovoltaic properties. Benefiting from the strong shielding ability of alkyl chains in the donor to its branch chains as observed in density functional theory (DFT), the open-circuit voltage (V_OC = 712.0 mV) of A5-based DSSC is higher than those of A1 and A3 by 90 and 78 mV, respectively. Therefore, the A5-based DSSC delivers a good efficiency of 8.54%, relying on its effective suppression of interfacial recombination. The results indicate that the judiciously tailored donor unit is an effective approach to optimize dye configurations to further improve power conversion efficiencies.

Structural Engineering of Organic D-A-π-A Dyes Incorporated with a Dibutyl-Fluorene Moiety for High-Performance Dye-Sensitized Solar Cells

Structural engineering of the light-harvesting dyes employed in DSSCs (dye-sensitized solar cells) with a systematic choice of the electron-donating and -accepting groups as well as the π-bridge allows the (photo)physical properties of dyes to match the criteria needed for improving the DSSC efficiency. Herein, we report an effective approach of molecular engineering of DSSC sensitizers, aiming to gain insights on the configurational impact of the fluorenyl unit on the optoelectronic properties and photovoltaic performance of DSSCs. Five new organic dyes (GZ116, GZ126, GZ129, MA1116, and MA1118) with a D-A-π-A framework integrated with a fluorenyl moiety were designed and synthesized for DSSCs. The fluorenyl unit is configured as part of the π-spacer for the GZ series, whereas it connected on the electron-deficient quinoxaline motif for the MA series. The devices fabricated from the MA1116 sensitizer produced the best performance under standard AM 1.5 G solar conditions as well as dim-light (300-6000 lx) illumination. The devices fabricated from MA1116 displayed a PCE of 8.68% (J_sc = 15.00 mA cm^-2, V_oc = 0.82 V, and FF = 0.71) under 1 sun and 26.81% (J_sc = 0.93 mA cm^-2, V_oc = 0.68 V, and FF = 0.76) under 6000 lx illumination. The device efficiency based on dye MA1116 under 1 sun outperformed that based on the standard N719 dye, whereas a comparable performance between devices based on MA1116 and N719 was achieved under dim-light conditions. A combination of enhancing the charge separation, suppressing dye aggregation, and providing better insulation that prevents the oxidized redox mediator from approaching the TiO₂ surface all contribute to the superior performance of DSSCs fabricated based on these light-harvesting dyes. The judicious integration of the fluorenyl unit in a D-A-π-A-based DSSC would be a promising strategy to boost the device performance.

Structural modulation of phenothiazine and coumarin based derivatives for high performance dye sensitized solar cells: a theoretical study

A series of dyes with the D-π-A architecture has been designed and studied for dye sensitized solar cells (DSSCs). We have used phenothiazine (PTZ) and coumarin (COU) derivatives as the donor unit and benzopyrrole (BTZ) and 2-methyl-2H-isoindole-1,3-(3aH,7aH)-diene (IND) as the acceptor unit along with the azomethine group and thiophene ring as the π-spacer unit. Three electron donating groups viz. -CH3, -NH2, and -OH and four electron withdrawing groups viz. -CF3, -COCl, -F and -NO2 have been attached at the donor and the acceptor units respectively of the four unsubstituted dyes COU-BTZ, PTZ-BTZ, COU-IND and PTZ-IND. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods have been employed to investigate the structural, electronic and photochemical properties of these dyes. The study reveals that the unsubstituted dye PTZ-BTZ possesses the lowest value of ΔH-L. Our study also reveals that attachment of the -NO2 group at the acceptor unit lowers the ΔH-L values of all the dye molecules. We have observed that the excited state oxidation potential (ESOP) of all the dyes lies above the conduction band of the TiO2 semiconducting surface. However, the ground state oxidation potential (GSOP) of most of the dyes belonging to the COU-BTZ and COU-IND groups lies below the redox potential of the I-/I3- redox couple. The total reorganization energy (λtot) values of the COU-BTZ and COU-IND groups of dyes are observed to be low compared to the other groups of dyes. The study of the charge transport properties of the dyes confirms that the designed dyes will act as electron transport materials. The absorption properties of the dyes show that the COU-BTZ group of dyes possesses the maximum values of the absorption wavelength (λmax values) and attaching the -NO2 group at the acceptor unit shifts the λmax values of all the dyes to the longer region. From the study of the electronic properties of the dye-TiO2 complexes it has been observed that the performance of the dyes has been enhanced compared to the isolated dye molecules.

Synthesis and Characterization of New Organic Dyes Containing the Indigo Core

A new series of symmetrical organic dyes containing an indigo central core decorated with different electron donor groups have been prepared, starting from Tyrian Purple and using the Pd-catalyzed Stille-Migita coupling process. The effect of substituents on the spectroscopic properties of the dyes has been investigated theoretically and experimentally. In general, all dyes presented intense light absorption bands, both in the blue and red regions of the visible spectrum, conferring them a bright green color in solution. Using the same approach, an asymmetrically substituted D-A-π-A green dye, bearing a triarylamine electron donor and the cyanoacrylate acceptor/anchoring group, has been synthesized for the first time and fully characterized, confirming that spectroscopic and electrochemical properties are consistent with a possible application in dye-sensitized solar cells (DSSC).

Synthesis and Photovoltaic Properties of Boron β-Ketoiminate Dyes Forming a Linear Donor-π-Acceptor Structure

Organoboron complexes are of interest as chromophores for dye sensitizers owing to their light-harvesting and carrier-transporting properties. In this study, compounds containing boron β-ketoiminate (BKI) as a chromophore were synthesized and used as dye sensitizers in dye-sensitized solar cells. The new dyes were orange or red crystals and showed maximum absorptions in the 410-450 nm wavelength region on titanium dioxide substrates. These electrodes exhibited maximum efficiencies of over 80% in incident photon-to-current conversion efficiency spectra, suggesting that the continuous process of light absorption-excitation-electron injection was effectively performed. Open-circuit photovoltages were relatively high owing to the large dipole moments of the BKI dyes with a linear molecular structure. Thus, a maximum power conversion efficiency of 5.3% was successfully observed. Comparison of BKI dyes with boron β-diketonate dyes revealed certain differences in solution stability, spectral properties, and photovoltaic characteristics.

Theoretical study of D-A'-π-A/D-π-A'-π-A triphenylamine and quinoline derivatives as sensitizers for dye-sensitized solar cells

We have designed four dyes based on D-A'-π-A/D-π-A'-π-A triphenylamine and quinoline derivatives for dye-sensitized solar cells (DSSCs) and studied their optoelectronic properties as well as the effects of the introduction of alkoxy groups and thiophene group on these properties. The geometries, single point energy, charge population, electrostatic potential (ESP) distribution, dipole moments, frontier molecular orbitals (FMOs) and HOMO-LUMO energy gaps of the dyes were discussed to study the electronic properties of dyes based on density functional theory (DFT). And the absorption spectra, light harvesting efficiency (LHE), hole-electron distribution, charge transfer amount from HOMO to LUMO (Q CT), D index, H CT index, S m index and exciton binding energy (E coul) were discussed to investigate the optical and charge-transfer properties of dyes by time-dependent density functional theory (TD-DFT). The calculated results show that all the dyes follow the energy level matching principle and have broadened absorption bands at visible region. Besides, the introduction of alkoxy groups into triarylamine donors and thiophene groups into conjugated bridges can obviously improve the stability and optoelectronic properties of dyes. It is shown that the dye D4, which has had alkoxy groups as well as thiophene groups introduced and possesses a D-π-A'-π-A configuration, has the optimal optoelectronic properties and can be used as an ideal dye sensitizer.

Phenanthrene-Fused-Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper-Electrolyte-Based Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) based on Cu^II/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open-circuit voltages (V_OC , more than 1 V). However, their short-circuit photocurrent density (J_SC ) has remained modest. Increasing the J_SC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO₂ film and fast regeneration by the Cu^I complex. Herein, we report two new D-A-π-A-featured sensitizers termed HY63 and HY64, which employ benzothiadiazole (BT) or phenanthrene-fused-quinoxaline (PFQ), respectively, as the auxiliary electron-withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64-based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near-quantitative collection of photogenerated charge carriers.

Effect of fluorine substituents on benzothiadiazole-based D-π-A'-π-A photosensitizers for dye-sensitized solar cells

Two D-π-A'-π-A organic dyes with triazatruxene (TAT) as the electron donor, thiophene as the π-spacer, benzoic acid as the anchor group, and benzothiadiazole (BT) or difluorobenzo[c][1,2,5]thiadiazole (DFBT) as the additional acceptor, namely LS101 and LS102, respectively, were applied to dye-sensitized solar cells (DSSCs). As fluorine substituents are usually strong electron-withdrawing groups, introducing two fluorine atoms into BT was expected to strengthen the electron-withdrawing ability of the auxiliary acceptor, resulting in DSSCs with a broader light capture region and further improved power conversion efficiency (PCE). Fluorine is the smallest electron-withdrawing group with an induction effect, but can also act as an electron-donating group owing to its conjugation effect. When the conjugation effect is dominant, the electron-withdrawing ability of additional acceptor DFBT decreases instead. Accordingly, the band gap of LS102 was broadened and the UV-vis absorption spectrum was blue-shifted. In the end, DSSCs based on LS101 achieved a champion PCE of 10.2% (J sc = 15.1 mA cm-2, V oc = 966 mV, FF = 70.1%) while that based on LS102 gave a PCE of only 8.6% (J sc = 13.4 mA cm-2, V oc = 934 mV, FF = 69.1%) under standard AM 1.5G solar irradiation (100 mW cm-2) with Co2+/Co3+ as the electrolyte.

A 25 mA cm-2 dye-sensitized solar cell based on a near-infrared-absorbing organic dye and application of the device in SSM-DSCs

A blue organic near infrared (NIR) absorbing sensitizer, AP25, is investigated for use in broadly absorbing dye-sensitized solar cells (DSCs). AP25 shows solar-to-electric conversion with an onset near 900 nm in DSC devices and a photocurrent near 25 mA cm-2 when co-sensitized. An all-organic SSM-DSC device reaches 10.3% PCE.

Copper-based redox shuttles supported by preorganized tetradentate ligands for dye-sensitized solar cells

Three copper redox shuttles ([Cu(1)]2+/1+, [Cu(2)]2+/1+, and [Cu(3)]2+/1+) featuring tetradentate ligands were synthesized and evaluated computationally, electrochemically, and in dye-sensitized solar cell (DSC) devices using a benchmark organic dye, Y123. Neutral polyaromatic ligands with limited flexibility were targeted as a strategy to improve solar-to-electrical energy conversion by reducing voltage losses associated with redox shuttle electron transfer events. Inner-sphere electron transfer reorganization energies (λ) were computed quantum chemically and compared to the commonly used [Co(bpy)3]3+/2+ redox shuttle which has a reported λ value of 0.61 eV. The geometrically constrained biphenyl-based Cu redox shuttles investigated here have lower reorganization energies (0.34-0.53 eV) and thus can potentially operate with lower driving forces for dye regeneration (ΔGreg) in DSC devices when compared to [Co(bpy)3]3+/2+-based devices. The rigid tetradentate ligand design promotes more efficient electron transfer reactions leading to an improved JSC (14.1 mA cm-2), higher stability due to the chelate effect, and a decrease in VlossOC for one of the copper redox shuttle-based devices.

Molecular engineering of the alkyl chain in planar carbazole dyes toward efficient interfacial charge transfer processes

With the extension of the alkyl chain, the interfacial charge transfer processes are effectively improved.

Understanding the effects of the co-sensitizing ratio on the surface potential, electron injection efficiency, and Förster resonance energy transfer

Multiple absorbers that function in different absorption regions (near infra-red (NIR) and UV-Visible (UV-Vis)) have been widely used in solar cell applications to enhance the light-harvesting.

A poly(styrene-co-acrylonitrile) gel electrolyte for dye-sensitized solar cells with improved photoelectrochemical performance

Dye-sensitized solar cells based on a poly(styrene-co-acrylonitrile) based gel electrolyte gave a photo conversion efficiency of 6.72%.