2D Hybrid Nanostructure of Reduced Graphene Oxide-CdS Nanosheet for Enhanced Photocatalysis

Hydrothermal synthesis of layered zirconium phosphates and their intercalation properties

Layered inorganic materials are widely used as fillers in nanocomposites due to their unique properties such as mechanical performance, thermal properties, flame resistance, barrier properties, corrosion resistance, catalytic activity, and multifunctionality. Among them, layered α-zirconium phosphate (α-ZrP: Zr(HPO4)2H2O) is one of the representative inorganic materials and unique properties with P-O-H groups that can exchange inorganic and organic cations and intercalate basic molecules. This paper deals with the use of this compound as an adsorbent for heavy metal cations in wastewater. Samples were prepared by hydrothermal treatment at various Zr/P ratio, water amounts, and temperatures. Furthermore, an attempt was made to widen the interlayer distance of the sample using n-butylamine. The α- zirconium phosphate prepared at 160°C for 20 h with Zr/P = 1/2 adsorbed the most amount of metal ions. Furthermore, interlayer amine modification was effective. Then, the behaviour of the adsorption process was observed by varying the time of adsorption from 1 h to 50 h, in order to clarify the change in adsorption of the samples over time.

2D MoB MBene: An Efficient Co-Catalyst for Photocatalytic Hydrogen Production under Visible Light

Highly active and low-cost co-catalysts have a positive effect on the enhancement of solar H2 production. Here, we employ two-dimensional (2D) MBene as a noble-metal-free co-catalyst to boost semiconductor for photocatalytic H2 production. MoB MBene is a 2D nanoboride, which is directly made from MoAlB by a facile hydrothermal etching and manual scraping off process. The as-synthesized MoB MBene with purity >95 wt % is treated by ultrasonic cell pulverization to obtain ultrathin 2D MoB MBene nanosheets (∼0.61 nm) and integrated with CdS via an electrostatic interaction strategy. The CdS/MoB composites exhibit an ultrahigh photocatalytic H2 production activity of 16,892 μmol g-1 h-1 under visible light, surpassing that of pure CdS by an exciting factor of ≈1135%. Theoretical calculations and various measurements account for the high performance in terms of Gibbs free energy, work functions, and photoelectrochemical properties. This work discovers the huge potential of these promising 2D MBene family materials as high-efficiency and low-cost co-catalysts for photocatalytic H2 production.

Copper Nanoclusters as Multienzymes Mimic Activities of Oxidase and Ascorbic Acid Oxidase in the Presence of Imidazole

Artificial nanoenzymes based on metal nanoclusters have received great attention for multienzyme activities nowadays. In this work, pepsin-capped copper NCs (Cu-Pep NCs) are used as oxidase, ascorbic acid oxidase (AAO), and peroxidase mimics, and their activities are enhanced by the introduction of imidazole. The oxidase activity increased almost 7.5-fold, while 5-fold and 2-fold increases were observed for the peroxidase and AAO-like activity, respectively. The enhanced radical formation in the presence of imidazole moieties facilitates the enzymatic activity of the Cu-Pep-NCs/Imid system. This work describes the different enzymatic activities of the NCs, paving a new way for artificial nanoenzymes having enhanced activities.

CdS Nanoparticles Supported by Cobalt@Carbon-Derived MOFs for the Improved Adsorption and Photodegradation of Ciprofloxacin

The design and synthesis of efficient photocatalysts that promote the degradation of organic pollutants in water have attracted extensive attention in recent years. In this work, CdS nanoparticles are grown in situ on Co@C derived from metal-organic frameworks. The resulting hierarchical CdS/Co@C nanostructures are evaluated in terms of their adsorption and photocatalytic ciprofloxacin degradation efficiency under visible-light irradiation. The results show that, apart from offering a large surface area (55.69 m²·g^-1), the prepared material can effectively suppress the self-agglomeration of CdS and enhance the absorption of visible light. The CdS/Co@C-7 composite containing 7% wt Co@C has the highest photodegradation rate, and its activity is approximately 4.4 times greater than that of CdS alone. Moreover, this composite exhibits remarkable stability after three successive cycles of photocatalysis. The enhanced photocatalytic performance is largely ascribed to the rapid separation of electron-hole pairs and the effective electron transfer between CdS and Co@C, which is confirmed via electrochemical experiments and photoluminescence spectra. The active substance capture experiment and the electron spin resonance technique show that h⁺ is the main active entity implicated in the degradation of CIP, and accordingly, a possible mechanism of CIP photocatalytic degradation over CdS/Co@C is proposed. In general, this work presents a new perspective on designing novel photocatalysts that promote the degradation of organic pollutants in water.

Redox-Enhanced Photoelectrochemical Activity in PHV/CdS Hybrid Film

Semiconductive photocatalytic materials have received increasing attention recently due to their ability to transform solar energy into chemical fuels and photodegrade a wide range of pollutants. Among them, cadmium sulfide (CdS) nanoparticles have been extensively studied as semiconductive photocatalysts in previous studies on hydrogen generation and environmental purification due to their suitable bandgap and sensitive light response. However, the practical applications of CdS are limited by its low charge separation, which is caused by its weak ability to separate photo-generated electron-hole pairs. In order to enhance the photoelectrochemical activity of CdS, a polymer based on viologen (PHV) was utilized to create a series of PHV/CdS hybrid films so that the viologen unit could work as the electron acceptor to increase the charge separation. In this work, various electrochemical, spectroscopic, and microscopic methods were utilized to analyze the hybrid films, and the results indicated that introducing PHV can significantly improve the performance of CdS. The photoelectrochemical activities of the hybrid films were also evaluated at various ratios, and it was discovered that a PHV-to-CdS ratio of 2:1 was the ideal ratio for the hybrid films. In comparison with CdS nanoparticles, the PHV/CdS hybrid film has a relatively lower band gap, and it can inhibit the recombination of electrons and holes, enhancing its photoelectrochemical activities. All of these merits make the PHV/CdS hybrid film as a strong candidate for photocatalysis applications in the future.

Enhancing Photocatalytic Antibiotics Mineralization and Water Oxidation via Constructing Interfacial Electric Field in Plate-on-Plate BiOCl/WO3 Photocatalysts

Two-dimensional materials and related plate-on-plate interfacial heterostructures offer great flexibility for integrating different atomic layers, providing an attractive scheme for the construction of built-in electric fields in photocatalysts. Here, we developed an interfacial engineering strategy to construct well-interfaced plate-on-plate BiOCl/WO₃ heterojunctions for general enhanced photocatalytic oxidation reactions. BiOCl/WO₃ heterojunctions exhibited significant enhancements in oxygen evolution and antibiotic degradation, with a rate of 9.5 times and 14.7 times higher than that of WO₃. This enhancement is attributed to the well lattice matching contact surface of WO₃ {020} plane with BiOCl {001} plane, which integrates a strong built-in electric field induced by Bi-O chemically bonds, providing atomically fast transport channels for electrons. These findings offer new guidelines for designing interfacial structures for high-performance oxidative photocatalysts and provide insights into the underlying interfacial carrier transport mechanisms.

Modification of TiO2 by Er3+ and rGO enhancing visible photocatalytic degradation of arsanilic acid

As a typical wide band gap photocatalyst, titania (TiO₂) cannot use the visible light and has fast recombination rate of photogenerated electron-hole pairs. Simultaneous introduction of erbium ion (Er³⁺) and graphene oxide (rGO) into TiO₂ might overcome these two drawbacks. In this study, Er³⁺ and rGO were co-doped on TiO₂ to synthesize Er³⁺-rGO/TiO₂ photocatalyst through a two-step sol-gel method. Based on the UV-visible diffuse reflectance spectra and photoluminescence spectrum, the introduction of Er³⁺ and rGO increased the visible light absorption efficiency and enhanced the migration of photogenerated electron. Pure TiO₂ has almost no photocatalytic activity for arsanilic acid (p-ASA) degradation under visible light irradiation. However, while doping with 2.0 mol% Er³⁺ and 10.0 mol% rGO, the p-ASA could be completely degraded within 50 min by the Er³⁺-rGO/TiO₂ photocatalyst under visible light irradiation, and most of produced inorganic arsenic was in situ removed by adsorption from the solution. The reactive oxygen species (ROS) reacting with p-ASA was determined and superoxide radical (O₂^•-) and singlet oxygen (¹O₂) were the dominant ROS for the oxidation of p-ASA and arsenite. This work provides an approach of introducing Er³⁺ and rGO to enhance the visible light photocatalytic efficiency of TiO₂.

Assessment of Performance of Photocatalytic Nanostructured Materials with Varied Morphology Based on Reaction Conditions

Synthesis of nanomaterials with specific morphology is an essential aspect for the optimisation of its properties and applications. The application of nanomaterials is being discussed in a wide range of areas, one of which is directly relevant to the environment through photocatalysis. To produce an effective photocatalyst for environmental applications, morphology plays an important role as it affects the surface area, interfaces, crystal facets and active sites, which ultimately affects efficiency. The method of synthesis and synthesis temperature can be the basic considerations for the evaluation of a particular nanomaterial. In this study, we have considered the aspects of morphology with a basic understanding and analyzed them in terms of nanomaterial efficacy in photocatalysis. Different morphologies of specific nanomaterials such as titanium dioxide, zinc oxide, silver phosphate, cadmium sulphide and zinc titanate have been discussed to come to reasonable conclusions. Morphologies such as nanorods, nanoflower, nanospindles, nanosheets, nanospheres and nanoparticles were compared within and outside the domain of given nanomaterials. The different synthesis strategies adopted for a specific morphology have been compared with the photocatalytic performance. It has been observed that nanomaterials with similar band gaps show different performances, which can be linked with the reaction conditions and their nanomorphology as well. Materials with similar morphological structures show different photocatalytic performances. TiO₂ nanorods appear to have the best features of efficient photocatalyst, while the nanoflowers show very low efficiency. For CdS, the nanoflower is the best morphology for photocatalysis. It appears that high surface area is the key apart from the morphology, which controls the efficiency. The overall understanding by analyzing all the available information has enumerated a path to select an effective photocatalyst amongst the several nanomaterials available. Such an analysis and comparison is unique and has provided a handle to select the effective morphology of nanomaterials for photocatalytic applications.

Surface Wrinkling for Flexible and Stretchable Sensors

Recent advances in nanolithography, miniaturization, and material science, along with developments in wearable electronics, are pushing the frontiers of sensor technology into the large-scale fabrication of highly sensitive, flexible, stretchable, and multimodal detection systems. Various strategies, including surface engineering, have been developed to control the electrical and mechanical characteristics of sensors. In particular, surface wrinkling provides an effective alternative for improving both the sensing performance and mechanical deformability of flexible and stretchable sensors by releasing interfacial stress, preventing electrical failure, and enlarging surface areas. In this study, recent developments in the fabrication strategies of wrinkling structures for sensor applications are discussed. The fundamental mechanics, geometry control strategies, and various fabricating methods for wrinkling patterns are summarized. Furthermore, the current state of wrinkling approaches and their impacts on the development of various types of sensors, including strain, pressure, temperature, chemical, photodetectors, and multimodal sensors, are reviewed. Finally, existing wrinkling approaches, designs, and sensing strategies are extrapolated into future applications.

An electron-hole separation mechanism caused by the pseudo-gap formed at the interfacial Co-N bond between cobalt porphyrin metal organic framework and boron-doped g-C3N4 for boosting photocatalytic H2 production

Photocatalytic hydrogen evolution from water splitting presents an attractive prospect in dealing with the energy crisis, but the low efficiency of charge separation and migration still seriously hinders its further practical application. Here, an acidified boron-doped g-C₃N₄ (HBCNN) and cobalt porphyrin metal organic frameworks (CoPMOF) self-assembled two-dimensional and two-dimensional (2D/2D) hybrid photocatalyst is fabricated successfully. The resultant HBCNN/CoPMOF with optimum ratio exhibits a superior H₂ evolution rate of 33.17 mmol g^-1 h^-1, which is 3.04 and 100.50 times higher than the single HBCNN and CoPMOF, respectively. It is found that a coordination connection has formed between CoPMOF and HBCNN through Co-N bond, and the interfacial Co-N bond then forms a pseudo-gap in the up-spin channel of electronic states, establishing an electron-hole separation mechanism. It is this electron-hole separation mechanism that contributes to a Z-scheme transport mode of photogenerated carriers, which greatly promotes the photocatalytic H2 production performance of HBCNN/CoPMOF heterostructure. This work may provide an idea for the design of heterojunction to improve the photocatalytic performance by constructing electron-hole separation through interfacial bond.

Multifunctional Lanthanide-Doped Binary Fluorides and Graphene Oxide Nanocomposites Via a Task-Specific Ionic Liquid

Graphene oxide-based nanocomposites (NCMs) exhibit diverse photonic and biophotonic applications. Innovative nanoengineering using a task-specific ionic liquid (IL), namely, 1-butyl-3-methyl tetrafluoroborate [C₄mim][BF₄], allows one to access a unique class of luminescent nanocomposites formed between lanthanide-doped binary fluorides and graphene oxide (GO). Here the IL is used as a solvent, templating agent, and as a reaction partner for the nanocomposite synthesis, that is, "all three in one". Our study shows that GO controls the size of the NCMs; however, it can tune the luminescence properties too. For example, the excitation spectrum of Ce³⁺ is higher-energy shifted when GO is attached. In addition, magnetic properties of GdF₃:Tb³⁺ nanoparticles (NPs) and GdF₃:Tb³⁺-GO NCMs are also studied at room temperature (300 K) and very low temperature (2 K). High magnetization results for the NPs (e.g., 6.676 emu g^-1 at 300 K and 184.449 emu g^-1 at 2 K in the applied magnetic field from +50 to -50 kOe) and NCMs promises their uses in many photonic and biphotonic applications including magnetic resonance imaging, etc.

Tailoring the Growth of Nanosized α-Zirconium Phosphate

Nanosized α-zirconium phosphate (α-ZrP), unlike microcrystalline α-ZrP, takes less time to prepare and is synthesized directly in organic solvents. During the synthesis of nanosized α-ZrP, the heating step is critical because during which the particle growth/aggregation is ongoing. In order to explore more details of this step, extra water molecules were intentionally introduced to the ethanol gel of nanosized α-ZrP so that the evaporation of the solvent was slowed. To heat the gels at 65 °C for different periods (1-6 days), one could control with ease the synthesized α-ZrP in size, from 63 to 155 nm, and in morphology, from amorphous to highly crystalline. Furthermore, the heating step also affects the intercalated solvent and the dangling propionate groups on the edge of the nanosized α-ZrP, which could be deduced from the intercalation/exfoliation behavior of the nanocrystals. This modified synthesis method of nanosized α-ZrP offers an alternate means to tune the size and morphology of the nanosized α-ZrP for broad applications.

Unleashing non-conjugated polymers as charge relay mediators

The core factors affecting the efficiency of photocatalysis are predominantly centered on controllable modulation of anisotropic spatial charge separation/transfer and regulating vectorial charge transport pathways in photoredox catalysis, yet it still meets with limited success. Herein, we first conceptually demonstrate the rational design of unidirectional cascade charge transfer channels over transition metal chalcogenide nanosheets (TMC NSs: ZnIn2S4, CdS, CdIn2S4, and In2S3), which is synergistically enabled by a solid-state non-conjugated polymer, i.e., poly(diallyldimethyl ammonium chloride) (PDDA), and MXene quantum dots (MQDs). In such elaborately designed photosystems, an ultrathin PDDA layer functions as an intermediate charge transport mediator to relay the directional electron transfer from TMC NSs to MQDs that serve as the ultimate electron traps, resulting in a considerably boosted charge separation/migration efficiency. The suitable energy level alignment between TMC NSs and MQDs, concurrent electron-withdrawing capabilities of the ultrathin PDDA interim layer and MQDs, and the charge transport cascade endow the self-assembled TMC/PDDA/MQD heterostructured photosystems with conspicuously improved photoactivities toward anaerobic selective reduction of nitroaromatics to amino derivatives and photocatalytic hydrogen evolution under visible light irradiation. Furthermore, we ascertain that this concept of constructing a charge transfer cascade in such TMC-insulating polymer-MQD photosystems is universal. Our work would afford novel insights into smart design of spatial vectorial charge transport pathways by precise interface modulation via non-conjugated polymers for solar energy conversion.

Review elucidating graphene derivatives (GO/rGO) supported metal sulfides based hybrid nanocomposites for efficient photocatalytic dye degradation

Photocatalysis by utilizing semiconductors for the removal of toxic pollutants has gained tremendous interest for remediation purposes. The organic pollutants usually include; pesticides, dyes and other phenolic compounds. An imperative restraint associated with the photocatalytic effectiveness of the catalyst is the rapid recombination of the light generated electrons and holes. The particle agglomeration and electron-hole recombination hinders the rate of pollutant removal. For decades, researchers have used metal-sulfides efficiently for photocatalytic dye degradation. The recent use of hybrid nanomaterials with the combination of graphene derivatives such as graphene oxide and reduced graphene oxide (GO/rGO)-metal sulfide has gained interest. These composites have displayed an impressive upsurge in the photocatalytic activity of materials. The current review describes the various researches on dye photodegradation by employing (GO/rGO)-metal sulfide, exhibiting a boosted potential for photocatalytic dye degradation. A comprehensive study on (CuS, ZnS and CdS)–GO/rGO hybrid composites have been discussed in detail for effective photocatalytic dye degradation in this review. Astonishingly improved dye degradation rates were observed in all these studies employing such hybrid composites. The several studies described in the review highlighted the varying degradation rates based on diverse research parameters and efficacy of graphene derivatives for enhancement of photocatalytic activity.

2D/2D Heterojunction systems for the removal of organic pollutants: A review

Photocatalysis is considered to be an effective way to remove organic pollutants, but the key to photocatalysis is finding a high-efficiency and stable photocatalyst. 2D materials-based heterojunction has aroused widespread concerns in photocatalysis because of its merits in more active sites, adjustable band gaps and shorter charge transfer distance. Among various 2D heterojunction systems, 2D/2D heterojunction with a face-to-face contact interface is regarded as a highly promising photocatalyst. Due to the strong coupling interface in 2D/2D heterojunction, the separation and migration of photoexcited electron-hole pairs are facilitated, which enhances the photocatalytic performance. Thus, the design of 2D/2D heterojunction can become a potential model for expanding the application of photocatalysis in the removal of organic pollutants. Herein, in this review, we first summarize the fundamental principles, classification, and strategies for elevating photocatalytic performance. Then, the synthesis and application of the 2D/2D heterojunction system for the removal of organic pollutants are discussed. Finally, the challenges and perspectives in 2D/2D heterojunction photocatalysts and their application for removing organic pollutants are presented.

A review of graphene-TiO2 and graphene-ZnO nanocomposite photocatalysts for wastewater treatment

Technologies for wastewater remediation have been growing ever since the environmental and health concern is realized. Development of nanomaterials has enabled mankind to have different methods to treat the various kinds of inorganic and organic pollutants present in wastewater from many resources. Among the many materials, semiconductor materials have found many environmental applications due to their outstanding photocatalytic activities. TiO₂ and ZnO are more effectively used as photocatalyst or adsorbents in the withdrawal of inorganic as well as organic wastes from the wastewater. On the other hand, graphene is tremendously being investigated for applications in environmental remediation in view of the superior physical, optical, thermal, and electronic properties of graphene nanocomposites. In this work, graphene-TiO₂ and graphene-ZnO nanocomposites have been reviewed for photocatalytic wastewater treatment. The various preparation techniques of these nanocomposites have been discussed. Also, different design strategies for graphene-based photocatalyst have been revealed. These nanocomposites exhibit promising applications in most of the water purification processes which are reviewed in this work. Along with this, the development of these nanocomposites using biomass-derived graphene has also been introduced. PRACTITIONER POINTS: Graphene-TiO₂ and graphene-ZnO nanocomposites are effective for wastewater treatment through photocatalysis. These nanocomposite photocatalysts have been used in the form of membrane as well as antibacterial agents. Synthetic strategies and design considerations of graphene-based photocatalyst play a major role. Biomass-derived graphene-TiO₂ and graphene-ZnO nanocomposites have also found application in wastewater treatment.

Facet-Dependent Photoinduced Transformation of Cadmium Sulfide (CdS) Nanoparticles

Microbial-mediated transformation of anthropogenic Cd²⁺ controls its distribution, bioavailability, and potential risks. However, the processes readily form CdS nanoparticles (CdS-NPs), which exhibit dissolution behavior different from that of larger sized particles. Here, we investigated the effects of morphologies and facets of CdS-NPs on their photoinduced dissolution. Three CdS-NPs, CdS-sphere, CdS-rod, and CdS-sheet, and one nanosized biogenic CdS (Bio-CdS) were synthesized with different dominant facets of {101}, {100}, {001}, and {111} and thus distinct surface chemistry. As explored by HRTEM, EPR, and DFT calculations, photogenerated e^-/h⁺ pairs were more likely to generate on CdS-sheet surfaces due to higher surface energies and a narrower band gap, facilitating the formation of •OH and thereby faster dissolution (k_obs = 6.126-6.261 × 10^-2 h^-1). The wider band gaps of CdS-sphere and CdS-rod caused less formation of O₂^•- and •OH, leading to slower oxidative dissolutions (k_obs = 0.090-0.123 and 2.174-3.038 × 10^-2 h^-1, respectively). Given the similar surface energy as that of CdS-sheet, the dissolution rate of Bio-CdS was close to that of CdS-rod and CdS-sheet, which was 1.6-3.5 times faster than that of larger sized CdS, posing higher environmental risks than thought. Altogether, this work revealed the facet effects on the dissolution of CdS-NPs, manifesting a deeper understanding of metal sulfides' environmental behaviors.

Microwave-Enabled Size Control of Iron Oxide Nanoparticles on Reduced Graphene Oxide

Nanoparticle-functionalized 2D material networks are promising for a wide range of applications, but in situ formation of nanoparticles is commonly challenged by rapid growth. Here, we demonstrate controlled synthesis of small and dispersed iron oxide nanoparticles on reduced graphene oxide (rGO) networks through rapid localized heating with microwaves with low-cost iron nitrate as the precursor. The strong coupling of the microwave radiation with the rGO network rapidly heats the network locally to decompose the iron nitrate and generate iron oxide nanoparticles, while cessation of microwaves leads to rapid cooling to minimize crystal growth. Small changes in the microwave reaction time (<1 min) led to very large changes in the iron oxide morphology. The solid-state microwave syntheses produced narrower nanoparticle size distribution than conventional heating. These results illustrate the potential of solid-state microwave syntheses to control the nanoparticle size on 2D materials through rapid localized heating under the microwave process conditions, which should be extendable to a variety of transition metal oxide-rGO systems.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Boosting Photocatalytic Activity Using Reduced Graphene Oxide (RGO)/Semiconductor Nanocomposites: Issues and Future Scope

Semiconductor nanoparticles are promising materials for light-driven processes such as solar-fuel generation, photocatalytic pollutant remediation, and solar-to-electricity conversion. Effective application of these materials alongside light can assist in reducing the dependence on fossil-fuel driven processes and aid in resolving critical environmental issues. However, severe recombination of the photogenerated charge-carriers is a persistent bottleneck in several semiconductors, particularly those that contain multiple cations. This issue typically manifests in the form of reduced lifetime of the photoexcited electrons-holes leading to a decrease in the quantum efficiency of various light-driven applications. On the other hand, semiconducting oxides or sulfides, coupled with reduced graphene oxide (RGO), have drawn a considerable interest recently, partly because of the RGO enhancing charge separation and transportation through its honeycomb sp² network structure. High electron mobility, conductivity, surface area, and cost-effectiveness are the hallmark of the RGO. This Mini-Review focuses on (1) examining the approach to the integration of RGO with semiconductors to produce binary nanocomposites; (2) insights into the microstructure interface, which plays a critical role in leveraging charge transport; (3) key examples of RGO composites with oxide and sulfide semiconductors with photocatalysis as application; and (4) strategies that have to be pursued to fully leverage the benefit of RGO in RGO/semiconductors to attain high photocatalytic activity for a sustainable future. This Mini-Review focuses on areas requiring additional exploration to fully understand the interfacial science of RGO and semiconductor, for clarity regarding the interfacial stability between RGO and the semiconductor, electronic coupling at the heterojunction, and morphological properties of the nanocomposites. We believe that this Mini-Review will assist with streamlining new directions toward the fabrication of RGO/semiconductor nanocomposites with higher photocatalytic activity for solar-driven multifunctional applications.

Construction of NH2-MIL-125(Ti)/CdS Z-scheme heterojunction for efficient photocatalytic H2 evolution

Designing efficient semiconductor-based photocatalysts for hydrogen production is a challenging but promising prospect in energy conversion. Herein, a novel Z-scheme CdS/NH₂-MIL-125(Ti) heterojunction is successfully fabricated through a facile solvethermal method. The detailed characterizations reveal that CdS nanoparticles are in-suit archored on NH₂-MIL-125(Ti) nanoplates. Benefited from the intrinsic band alignment and intimate contact of two species, this established structure gives a positive effect regarding charge separation. In consequence, the optimal CdS/NH₂-MIL-125(Ti) nanocomposites exhibit excellent photocatalytic performance with hydrogen evolution rate of 6.62 mmol·h^-1·g^-1 under visible light illumination, which was 3.5 times higher than that of the pristine CdS. We believe that this work will provide a new avenue to develop high-efficiency heterojunction catalyst for solar-driven energy conversions and other application.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Pyridinic N-reduced graphene oxide and ZnO composite synergistically enhance photocatalytic performance

This paper reports the synthesis of nitrogen-doped reduced graphene oxide (N-rGO)/zinc oxide (ZnO) composite photocatalysts by one-step hydrothermal method. Taking urea as the nitrogen source, ammonia is released at high temperature, and reduced graphene oxide (rGO) has a strong adsorption effect on ammonia, which is more conducive to improving the nitrogen doping efficiency in the nitrogen doping process. The results of the dye degradation test showed that when the nitrogen content was 4 wt%, the photocatalytic degradation ability of the catalyst was the best, which was 88% higher than that of pure zinc oxide. The X-ray photoelectron spectroscopy (XPS) test showed that the catalytic effect of the sample dominated by pyridinic nitrogen was significantly improved. Besides, fluorescence tests have confirmed that highly conductive rGO can simultaneously capture or transfer photoelectrons within the system, thereby enhancing the photoelectron migration and reducing the private carrier recombination efficiency. N-rGO could act as an active electron accelerator, induce and enhance synergistic coupling, promote photocatalytic redox reactions, and dramatically improve the photocatalytic ability of modified graphene-based composite.

Recent Advancements and Future Prospects in Ultrathin 2D Semiconductor-Based Photocatalysts for Water Splitting

Ultrathin two-dimensional (2D) semiconductor-mediated photocatalysts have shown their compelling potential and have arguably received tremendous attention in photocatalysis because of their superior thickness-dependent physical, chemical, mechanical and optical properties. Although numerous comprehensions about 2D semiconductor photocatalysts have been amassed up to now, low cost efficiency, degradation, kinetics of charge transfer along with recycling are still the big challenges to realize a wide application of 2D semiconductor-based photocatalysis. At present, most photocatalysts still need rare or expensive noble metals to improve the photocatalytic activity, which inhibits their commercial-scale application extremely. Thus, developing less costly, earth-abundant semiconductor-based photocatalysts with efficient conversion of sunlight energy remains the primary challenge. In this review, it begins with a brief description of the general mechanism of overall photocatalytic water splitting. Then a concise overview of different types of 2D semiconductor-mediated photocatalysts is given to figure out the advantages and disadvantages for mentioned semiconductor-based photocatalysis, including the structural property and stability, synthesize method, electrochemical property and optical properties for H2/O2 production half reaction along with overall water splitting. Finally, we conclude this review with a perspective, marked on some remaining challenges and new directions of 2D semiconductor-mediated photocatalysts.

WS2 Quantum Dots on e-Textile as a Wearable UV Photodetector: How Well Reduced Graphene Oxide Can Serve as a Carrier Transport Medium?

We document the fabrication and investigations of a novel photodetector based on a WS₂ quantum dots and reduced graphene oxide (RGO) (WS₂-QDs/RGO) heterostructure. The proposed photodetector is simple, scalable, cost-effective, and flexible and works in an ambient environment. An enhanced photodetection efficiency is observed due to the superior electronic properties of WS₂-QDs and excellent electrical as well as thermal properties of the carrier transportation medium, RGO. For device fabrication, GO and WS₂-QDs were separately synthesized via different chemistry followed by decorating WS₂-QDs on RGO coated cotton textile. Characterization studies confirm the transformation of exfoliated WS₂-2D flakes into WS₂-0D quantum dots and graphene oxide (GO) to RGO. The optimized photodetection performance of WS₂-QDs/RGO demonstrates its photoresponsivity of 5.22 mA W^-1 at 1.4 mW mm^-2 power density of a 405 nm illumination source. Other sensor parameters such as photosensitivity (∼20.2%), resolution (∼0.031 mW mm^-2 μA^-1), response time (1.57 s), recovery time (1.83 s), and specific detectivity (∼1.6 × 10⁶ jones) are found for WS₂-QDs/RGO sensor, and a few of these parameters are comparable and even superior to some of the devices as reported. Photosensing mechanism is explained in terms of charge transfer caused by appropriate band alignment across the interface between WS₂-QDs and RGO, where dimensionality and quantum confinement of nanostructures synergistically enhance the overall performance of the heterostructure. The device flexibility is examined through bending, stretching, and twisting experiments and successfully demonstrated its potentiality. Sensor performance even after being soaked in water and subsequent drying shows the possibility of reuse. The attributes of flexibility, high sensitivity and responsivity, superior resolution, and cost-effectiveness of our novel flexible photodetector indicate its promising potential for flexible and wearable optical detectors operating in UV band. Although negative photoconductance of the WS₂-QDs/RGO sensor is a major cause for not allowing the sensor to show its best performance, a trade-off is made with improved device design to qualify the expectations of being a competitive device, and this has been demonstrated with experimental facts.

Recent Progress, Challenges, and Prospects in Two-Dimensional Photo-Catalyst Materials and Environmental Remediation

The successful photo-catalyst library gives significant information on feature that affects photo-catalytic performance and proposes new materials. Competency is considerably significant to form multi-functional photo-catalysts with flexible characteristics. Since recently, two-dimensional materials (2DMs) gained much attention from researchers, due to their unique thickness-dependent uses, mainly for photo-catalytic, outstanding chemical and physical properties. Photo-catalytic water splitting and hydrogen (H2) evolution by plentiful compounds as electron (e-) donors is estimated to participate in constructing clean method for solar H2-formation. Heterogeneous photo-catalysis received much research attention caused by their applications to tackle numerous energy and environmental issues. This broad review explains progress regarding 2DMs, significance in structure, and catalytic results. We will discuss in detail current progresses of approaches for adjusting 2DMs-based photo-catalysts to assess their photo-activity including doping, hetero-structure scheme, and functional formation assembly. Suggested plans, e.g., doping and sensitization of semiconducting 2DMs, increasing electrical conductance, improving catalytic active sites, strengthening interface coupling in semiconductors (SCs) 2DMs, forming nano-structures, building multi-junction nano-composites, increasing photo-stability of SCs, and using combined results of adapted approaches, are summed up. Hence, to further improve 2DMs photo-catalyst properties, hetero-structure design-based 2DMs' photo-catalyst basic mechanism is also reviewed.

Tetracycline Photocatalytic Degradation under CdS Treatment

Industrialization and the growing consumption of medicines leads to global aquatic contamination. One of the antibiotics widely used against bacterial infections in both human and veterinary medicine is tetracycline. Despite its positive antibiotic action, tetracycline is resistant against degradation, and therefore it accumulates in the environment, including the aquatic environment, creating great health hazards, possibly stimulating antibiotic resistance of pathogenic organisms. In this research, aqueous suspensions of semiconductor nanoparticles CdS were used for photocatalytic activity studies in the presence of methylene blue as a model compound, and finally, in the presence of tetracycline, a broad-spectrum antibiotic widely used against bacterial infections, as well as a live-stock food additive. The mechanism and kinetic rate constants of photocatalytic degradation processes of methylene blue and tetracycline were described in correlation with the energy diagram of CdS nanoparticles.

Enhanced photocatalytic efficiency of layered CdS/CdSe heterostructures: Insights from first principles electronic structure calculations

Metal sulfides are emerging as an important class of materials for photocatalytic applications, because of their high photo responsive nature in the wide visible light range. In this class of materials, CdS with a direct band gap of 2.4 eV, has gained special attention due to the relative position of its conduction band minimum, which is very close to the energies of the reduced protons. However, the photogenerated holes in the valence band of CdS are prone to oxidation and destroy its structure during photocatalysis. Thus constructing a CdS based heterostructure would be an effective strategy for improving the photocatalytic performance. In this work we have done a detail theoretical investigation based on hybrid density functional theory calculation to get insight into the energy band structure, mobility and charge transfer across the CdS/CdSe heterojunction. The results indicate that CdS/CdSe forms type-II heterostructure that has several advantages in improving the photocatalytic efficiency under visible light irradiation.

Design of MoS2/Graphene van der Waals Heterostructure as Highly Efficient and Stable Electrocatalyst for Hydrogen Evolution in Acidic and Alkaline Media

The thermodynamically stable phase of molybdenum disulfide (MoS₂) is evaluated as a promising and durable nonprecious-metal electrocatalyst toward the hydrogen evolution reaction (HER); however, its actual catalytic activity is restricted by an inert basal plane, low electronic conductivity, low density, and using efficiency of edged atoms. Moreover, 2D/2D van der Waals (vdws) heterostructures (HSs) with face-to-face contact can construct a highly coupled interface and are demonstrated to have immense potential for catalytic applications. In the present work, a 2D/2D hetero-layered architecture of an electrocatalyst, based on the alternate arrangement of ultrasmall monolayer MoS₂ nanosheets (approximately 5-10 nm) and ultrathin graphene (G) sheets, is prepared by a facilely chemical process, which is named as MoS₂/G HS. The unique structural characteristic of MoS₂/G HS is in favor of accommodating more active sites as the centers of ad/desorption hydrogen and transferring and separating the charges at a coupled interface to improve the electronic conductivity and durability. The density functional theory calculation results further confirm that the alternately arranged G layers and MoS₂ monolayers, as well as the expanded interplanar distance of 1.104 nm for MoS₂/G HS, can exhibit a superior HER performance in both 0.5 M H₂SO₄ and 1.0 M KOH.

Recent Advances in Semiconductor-Graphene and Semiconductor-Ferroelectric/Ferromagnetic Nanoheterostructures for Efficient Hydrogen Generation and Environmental Remediation

Semiconductor heterostructures have attracted intensive research attention during the past few years owing to their great potential for energy and environmental remediation related applications. Effective optical absorption and efficient separation of photogenerated charge carriers are among the key factors for achieving high efficiency in a photocatalytic process. This mini-review summarizes state-of-the-art activities in designing nanosemiconductor heterostructures using multifunctional semiconductors for solar-to-hydrogen conversion and degradation of organic pollutants. Various novel design strategies such as semiconductor/graphene heterojunctions including graphene as a semimetal and photosensitizer, semiconductor/ferromagnetic, and semiconductor/ferroelectric nanoheterostructures for enhancing the performance of photocatalytic processes have been discussed. Finally, key challenges and future prospects for designing more efficient photocatalytic materials are briefly outlined.

Hummers' and Brodie's graphene oxides as photocatalysts for phenol degradation

Undoped metal-free graphene oxide (GO) materials prepared by either a modified Hummers' (GO-H) or a Brodie's (GO-B) method were tested as photocatalysts in aqueous solution for the oxidative conversion of phenol. In the dark, the adsorptive capacity of GO-B towards phenol (~35%) was higher than that of GO-H (~15%). Upon near-UV/Vis irradiation, GO-H was able to remove 21% of phenol after 180 min, mostly through adsorption. On the other hand, by using less energetic visible irradiation, GO-B removed as much as 95% in just 90 min. By thorough characterization of the prepared materials (SEM, HRTEM, TGA, TPD, Raman, XRD, XPS and photoluminescence) the observed performances could be explained in terms of their different surface chemistries. The GO-B presents the lower concentration of oxygen functional groups (in particular carbonyl groups as revealed by XPS) and it has a considerably higher photocatalytic activity compared to GO-H. Photoluminescence (PL) of liquid dispersions and XRD analysis of powders showed lower PL intensity and smaller interlayer distance for GO-B relative to GO-H, respectively: this suggests lower electron-hole recombination and enhanced electron transfer in GO-B, in support of its boosted photocatalytic activity. Reusability tests showed no efficiency loss after a second usage cycle and over three runs under visible irradiation, which was in line with the similarity of the XPS spectra of the fresh and used GO-B materials. Moreover, scavenging studies revealed that holes and hydroxyl radicals were the main reactive species in play during the photocatalytic process. The obtained results, establish for the first time, that GO prepared by Brodie's method is an active and stable undoped metal-free photocatalyst for phenol degradation in aqueous solutions, opening new paths for the application of more sustainable and metal-free materials for water treatment solutions.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

Wide Band Gap Chalcogenide Semiconductors

Wide band gap semiconductors are essential for today's electronic devices and energy applications because of their high optical transparency, controllable carrier concentration, and tunable electrical conductivity. The most intensively investigated wide band gap semiconductors are transparent conductive oxides (TCOs), such as tin-doped indium oxide (ITO) and amorphous In-Ga-Zn-O (IGZO), used in displays and solar cells, carbides (e.g., SiC) and nitrides (e.g., GaN) used in power electronics, and emerging halides (e.g., γ-CuI) and 2D electronic materials (e.g., graphene) used in various optoelectronic devices. Compared to these prominent materials families, chalcogen-based (Ch = S, Se, Te) wide band gap semiconductors are less heavily investigated but stand out because of their propensity for p-type doping, high mobilities, high valence band positions (i.e., low ionization potentials), and broad applications in electronic devices such as CdTe solar cells. This manuscript provides a review of wide band gap chalcogenide semiconductors. First, we outline general materials design parameters of high performing transparent semiconductors, as well as the theoretical and experimental underpinnings of the corresponding research methods. We proceed to summarize progress in wide band gap (E_G > 2 eV) chalcogenide materials-namely, II-VI MCh binaries, CuMCh₂ chalcopyrites, Cu₃MCh₄ sulvanites, mixed-anion layered CuMCh(O,F), and 2D materials-and discuss computational predictions of potential new candidates in this family, highlighting their optical and electrical properties. We finally review applications-for example, photovoltaic and photoelectrochemical solar cells, transistors, and light emitting diodes-that employ wide band gap chalcogenides as either an active or passive layer. By examining, categorizing, and discussing prospective directions in wide band gap chalcogenides, this Review aims to inspire continued research on this emerging class of transparent semiconductors and thereby enable future innovations for optoelectronic devices.

In situ coupling of TiO2(B) and ZIF-8 with enhanced photocatalytic activity via effective defect

A composite photocatalyst was obtained by coupling ZIF-8 and TiO₂(B) via a simple method, which showed the enhanced photocatalytic due to the oxygen vacancies/Ti³⁺.