Monitoring Demineralization and Subsequent Remineralization of Human Teeth at the Dentin-Enamel Junction with Atomic Force Microscopy

Dynamics of Dental Enamel Surface Remineralization under the Action of Toothpastes with Substituted Hydroxyapatite and Birch Extract

To address tooth enamel demineralization resulting from factors such as acid erosion, abrasion, and chronic illness treatments, it is important to develop effective daily dental care products promoting enamel preservation and surface remineralization. This study focused on formulating four toothpastes, each containing calcined synthetic hydroxyapatite (HAP) in distinct compositions, each at 4%, along with 1.3% birch extract. Substitution elements were introduced within the HAP structure to enhance enamel remineralization. The efficacy of each toothpaste formulation was evaluated for repairing enamel and for establishing the dynamic of the remineralization. This was performed by using an in vitro assessment of artificially demineralized enamel slices. The structural HAP features explored by XRD and enamel surface quality by AFM revealed notable restorative properties of these toothpastes. Topographic images and the self-assembly of HAP nanoparticles into thin films on enamel surfaces showcased the formulations' effectiveness. Surface roughness was evaluated through statistical analysis using one-way ANOVA followed by post-test Bonferroni's multiple comparison test with a p value < 0.05 significance setting. Remarkably, enamel nanostructure normalization was observed within a short 10-day period of toothpaste treatment. Optimal remineralization for all toothpastes was reached after about 30 days of treatment. These toothpastes containing birch extract also have a dual function of mineralizing enamel while simultaneously promoting enamel health and restoration.

Atomic force microscopy-mediated mechanobiological profiling of complex human tissues

Tissue mechanobiology is an emerging field with the overarching goal of understanding the interplay between biophysical and biochemical responses affecting development, physiology, and disease. Changes in mechanical properties including stiffness and viscosity have been shown to describe how cells and tissues respond to mechanical cues and modify critical biological functions. To quantitatively characterize the mechanical properties of tissues at physiologically relevant conditions, atomic force microscopy (AFM) has emerged as a highly versatile biomechanical technology. In this review, we describe the fundamental principles of AFM, typical AFM modalities used for tissue mechanics, and commonly used elastic and viscoelastic contact mechanics models to characterize complex human tissues. Furthermore, we discuss the application of AFM-based mechanobiology to characterize the mechanical responses within complex human tissues to track their developmental, physiological/functional, and diseased states, including oral, hearing, and cancer-related tissues. Finally, we discuss the current outlook and challenges to further advance the field of tissue mechanobiology. Altogether, AFM-based tissue mechanobiology provides a mechanistic understanding of biological processes governing the unique functions of tissues.

[The results of the study of the focus of initial caries of human tooth enamel in vitro using atomic force microscopy]

OBJECTIVE

Identify structural disorders of the surface of the enamel of a human tooth during the development of the carious process in the «white spot» stage using atomic force microscopy (AFM).

MATERIAL AND METODS

The studies were carried out on 10 molar samples in areas with initial caries in the white spot stage. 6 areas of initial caries were scanned using the atomic force microscope Cetus Light (Nano Scan Technology, Russia) in semi-contact mode. Criteria were proposed for comparing the results of AFM scanning of tooth enamel surface samples and, based on them, the nature of the main structural disorders of the enamel surface in the affected area was determined.

RESULTS

For all the samples studied, the healthy enamel surface was smoother compared to the enamel in the area of the clinically visible «white spot» and in the immediate vicinity of it. The heterogeneity of the enamel surface in the center of the white spot» for all the samples studied was at least 60% higher than at the edge of the process. It was revealed that the heterogeneity of the surface outside the clinically visible white spot at a distance of less than 1 mm from its perimeter is at least 30% higher than that of healthy tissue of the same tooth. It is shown that the heterogeneity of the enamel surface in the center of the caries area in the white spot stage is at least 4 times greater than the heterogeneity of the surface of the healthy enamel of the same tooth, which indicates its demineralization.

CONCLUSION

The established features of the spread of the initial carious process can be used in clinical practice for the diagnosis and dynamic observation of the processes of enamel demineralization.

Assessment of demineralized tooth lesions using optical coherence tomography and other state-of-the-art technologies: a review

Tooth demineralization is one of the most common intraoral diseases, encompassing (1) caries caused by acid-producing bacteria and (2) erosion induced by acid of non-bacterial origin from intrinsic sources (e.g. stomach acid reflux) and extrinsic sources (e.g. carbonated drinks). Current clinical assessment based on visual-tactile examination and standardized scoring systems is insufficient for early detection. A combination of clinical examination and technology is therefore increasingly adapted. This paper reviews various procedures and technologies that have been invented to diagnose and assess the severity of tooth demineralization, with focus on optical coherence tomography (OCT). As a micron-resolution non-invasive 3D imaging modality, variants of OCT are now available, offering many advantages under different working principles for detailed analytical assessment of tooth demineralization. The roles, capabilities and impact of OCT against other state-of-the-art technologies in both clinical and research settings are described. (139 words).

Ultrastructural characterisation of young and aged dental enamel by atomic force microscopy

Recent advances in atomic force microscopy (AFM) have allowed the characterisation of dental-associated biomaterials and biological surfaces with high-resolution. In this context, the topography of dental enamel - the hardest mineralised tissue in the body - has been explored with AFM-based approaches at the micro-scale. With age, teeth are known to suffer changes that can impact their structural stability and function; however, changes in enamel structure because of ageing have not yet been explored with nanoscale resolution. Therefore, the aim of this exploratory work was to optimise an approach to characterise the ultrastructure of dental enamel and determine potential differences in topography, hydroxyapatite (HA) crystal size, and surface roughness at the nanoscale associated to ageing. For this, a total of six teeth were collected from human donors from which enamel specimens were prepared. By employing intermittent contact (AC mode) imaging, HA crystals were characterised in both transversal and longitudinal orientation (respect to surface plane) with high-resolution in environmental conditions. The external enamel surface displayed the presence of a pellicle-like coating on its surface, that was not observable on cleaned specimens. Acid-etching exposed crystals that were imaged and morphologically characterised in high-resolution at the nanoscale in both the external and internal regions of enamel in older and younger specimens. Our results demonstrated important individual variations in HA crystal width and roughness parameters across the analysed specimens; however, an increase in surface roughness and decrease in HA width was observed for the pooled older external enamel group compared to younger specimens. Overall, high-resolution AFM was an effective approach for the qualitative and quantitative characterisation of human dental enamel ultrastructure. Future work should focus on exploring the ageing of dental enamel with increased sample sizes to compensate for individual differences as well as other potential confounding factors such as behavioural habits and mechanical forces. Lay abstract: Currently, advanced microscopy techniques such as atomic force microscopy (AFM) can be used to characterise surfaces relevant to dentistry with great detail. Among these surfaces of interest, dental enamel - the hardest mineralised tissue in the body- is important as it protects the deeper areas of the tooth from harmful stimuli such as sudden temperature changes, bacterial penetration, and chemical attack. Also, dental enamel is an important surface for the adhesion of some types of dental restorations; thus, its structure and organisation is highly relevant for both dental scientists and clinicians. With age, teeth are known to suffer changes that can impact their structural stability and function; however, changes in enamel structure as a result of ageing have not yet been explored with nanoscale resolution. It is necessary to develop and optimise AFM-based techniques in order to process specimens from dental samples across different age groups for ageing-associated nanoscale studies in the future. Therefore, the aim of this investigation was to optimise an approach to characterise the ultrastructure of dental enamel and determine potential differences in enamel topography, hydroxyapatite (HA) crystal size, and surface roughness at the nanoscale associated to ageing. For this, human enamel specimens obtained from a total of six teeth were collected and analysed with AFM, and HA crystals were characterised in both transversal and longitudinal orientation with high-resolution in environmental conditions. Upon AFM observation, sound superficial enamel displayed the presence of a pellicle-like coating on its surface, that was not observable after specimens were cleaned. Furthermore, acid-etching exposed HA crystals that were imaged and morphologically characterised in high-resolution at the nanoscale across different regions of enamel in older and younger specimens. We observed important individual variations in HA crystal width and roughness parameters across the analysed specimens and groups, suggesting individual as well as age-associated differences. Overall, high-resolution AFM was an effective approach for the qualitative and quantitative characterisation of human dental enamel ultrastructure at the nanometer range with minimal sample preparation. This proof-of-concept work can pave the way for future studies employing increased sample sizes to compensate for individual differences and population level factors. This article is protected by copyright. All rights reserved.

Manifestation and Mechanisms of Abnormal Mineralization in Teeth

Tooth biomineralization is a dynamic and complicated process influenced by local and systemic factors. Abnormal mineralization in teeth occurs when factors related to physiologic mineralization are altered during tooth formation and after tooth maturation, resulting in microscopic and macroscopic manifestations. The present Review provides timely information on the mechanisms and structural alterations of different forms of pathological tooth mineralization. A comprehensive study of these alterations benefits diagnosis and biomimetic treatment of abnormal mineralization in patients.

Spectroscopic and microscopic examination of teeth exposed to green tea at different temperatures

Tea is a popular beverage consumed at different temperatures. The effect of tea on teeth at different temperatures has not been studied previously. The present study used an in vitro green tea immersed tooth model at different tea temperatures (hot and cold) compared to an in vivo tea administration model allowing rats to drink tea over the course of a week. The elements present in tea leaves were identified by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and compared to the elements in teeth (enamel surface) using Laser-Induced Breakdown Spectroscopy (LIBS). Here, LIBS demonstrated in vivo and in vitro green tea treatments resulted in a significant increase in the mineral elements found in enamel. For the in vitro assessment, elements in enamel varied based on cold-tea and hot-tea treatment; however, hot water reduced the elements in enamel. Atomic force microscopy found the in vivo tea group had a higher roughness average (RA) compared with the in vivo water group. Cold tea and hot tea in vitro groups demonstrated lower RA than in vitro water controls. Scanning electron microscopy found hot water induced cracks more than 1.3μm in enamel while cold tea and hot tea promoted the adhering of extrinsic matter to teeth. Overall, teeth treated to high temperature lost the mineral phase leading to demineralization. Our results indicate that green tea protects enamel, but its protective action in dental structures is enhanced at cold temperature.

Disorders of Dental Hard Tissues Induced by Radioiodine-131 (I-131) Therapy Used in Differentiated Thyroid Cancer: An In Vitro Study

This study aimed to evaluate, in vitro, the effects of I-131 on enamel and dentin in healthy human incisive permanent maxillary teeth. Our in vitro model analogue with the in vivo conditions of differentiated thyroid carcinoma patients treated with I-131, consisted in a solution of I-131 dissolved in artificial saliva. A total of 48 teeth were divided into eight groups (n = 6): control, irradiation groups at 3, 6, 12, 24, 36, 48, and 192 h, respectively. At the end of radiation exposure, radioiodine activity of specimens was assessed. Fine microstructure, nanostructure, surface roughness, and hidroxyapatite (HAP) crystallite diameter were investigated by atomic force microscopy (AFM) to both enamel and dentin structures. There is a constant increase of radioactivity in dental structures at 3, 6, 12, 24 h, due to progressive retention and I-131 migration, with a maximum at 36 h. Enamel showed notable alterations, which was correlated with the increase of the treatment time. A relevant visible distance between the HAP prisms was observed after 24 h. The surface suffered a loss in its compact structure. I-131 acts in the same way on HAP crystallites in dentin as in those in enamel. It was noticed that their morpho-dimensional changes occurred only after 12 h of treatment. Radioiodine-131 determines degradation of enamel and dentin by starting from the alteration of the crystalline network of HAP prisms, transforming them from compact materials into an agglomeration of rocky submicron structures.

Effects of different toothpastes on the prevention of erosion in composite resin and glass ionomer cement enamel and dentin restorations

Objective

This study aimed to evaluate the effects of different toothpastes on the surface wear of enamel, dentin, composite resin (CR), and resin-modified glass ionomer cement (RMGIC), and to perform a topographic analysis of the surfaces, based on representative images generated by atomic force microscopy (AFM) after erosion-abrasion cycles.

Methodology

One hundred and forty bovine incisors were collected and divided into two groups: 72 enamel and 72 dentin blocks (4×4 mm). Half of the specimens were restored with CR (Filtek Z350 XT) and the other half with RMGIC (Fuji II LC). Then, samples were submitted to a demineralization cycle (5 days, 4×2 min/day, 1% citric acid, pH 3.2) and exposed to three different toothpastes (2×15 s/day): without fluoride (WF, n=12), sodium fluoride-based (NaF, n=12), and stannous fluoride-based (SnF₂, n=12). Surface wear, as well as restoration interfaces wear, were investigated by profilometry of the dental substrates and restorative materials. All representative surfaces underwent AFM analysis. Data were analyzed by two-way analysis of variance and Tukey’s tests (α=0.05).

Results

NaF-based toothpaste caused the greater dentin surface wear (p<0.05). Toothpastes affected only enamel-restoration interfaces. AFM analysis showed precipitate formation in dentinal tubules caused by the use of fluoride toothpastes.

Conclusions

NaF-based toothpastes had no protective effect on enamel adjacent to CR and RMGIC against erosion-abrasion challenges, nor on dentin adjacent to RMGIC material. SnF2-based toothpastes caused more damage to interfaces between enamel and RMGIC.

Nanoscale effects of beverages on enamel surface of human teeth: An atomic force microscopy study

Dental erosion has become a prevalence disease and attracted increasing attention worldwide. In this research, we quantitatively evaluate the mechanical and morphological changes in the very early stages of softening and weakening of human enamel surfaces induced by soft drinks using atomic force microscopy (AFM). With an increase of the immersion time in soft drinks, we found a significant increase of surface roughness (R_q) of the enamel surface. The prismatic structure of enamel was clearly observed after a 1-h immersion in Coca-Cola®, which shows its strong erosion effect. According to the elastic modulus mapping images obtained by AFM, a considerable decrease of elastic modulus (E) of enamel surface has been found as the enamel surface structures are etched away by soft drinks. A high surface roughness of enamel will result in a high chance of cavities due to easier bacterial adhesion on rougher surface, while a drastic deterioration of the mechanical properties of the enamel will weaken its protection property. Our findings show the serious influence of acidic drinks on enamel surface at the very beginning stage of etching process, which is quite meaningful for people to prevent dental erosion and keep dental health.

Remineralization ability of sodium fluoride on the microhardness of enamel, dentin, and dentinoenamel junction: An in vitro study

Aim:

Dental tissues such as enamel, dentinoenamel junction (DEJ), dentin, and root dentin can react differently to demineralization and remineralization. The aim of this study was to evaluate the remineralization ability of sodium fluoride on the microhardness of enamel, dentin, and dentinoenamel junction.

Materials and Methods:

Ten extracted third molar teeth were sectioned mesiodistally to form control and test groups. For the test group, initial demineralization was done with acetic acid for 24 h followed by remineralization for 28 days by application of sodium fluoride (226 ppm) for 2 min twice a day. Vickers microhardness test was done to control and test groups at different sites after initial demineralization and on the 3^rd, 5^th, 7^th, 14^th, and 28^th day of remineralization.

Statistical Analysis Used:

Data were analyzed with one-way analysis of variance and post hoc test with a significance level of P < 0.001 with SPSS (21) software.

Results:

Microhardness values in the demineralization group were significantly lower than controls (P < 0.001). Evaluation of remineralization samples showed that microhardness similar to control values were achieved at the 3^rd day in root predentin and on the 5^th day in coronal dentin and coronal predentin. On the 7^th day, remineralization coronal predentin was significantly higher than the control (P < 0.001). On the 14^th day, DEJ axial zone and root dentin were similar to control and coronal dentin was significantly higher than the control (P < 0.001). Enamel was similar to control on the 28^th day. Microhardness of DEJ-cusp tip and DEJ-center of the fissure was significantly lower than control even at the 28^th day (P < 0.001).

Conclusion:

Long-term repeated application of sodium fluoride (226 ppm) can improve the microhardness of demineralized dental tissues on enamel, dentin, and DEJ-axial zone, except in the DEJ-cusp tip and DEJ-center of fissure.