Direct Carbonization of Cyanopyridinium Crystalline Dicationic Salts into Nitrogen-Enriched Ultra-Microporous Carbons toward Excellent CO2 Adsorption

Preparation and application of one new supramolecular molybdenum oxygen cluster with adsorption of organic contaminants in wastewater

In this paper, one supermolecular compound, namely, p-[C20H18N2O4][Mo8O26]0.5·H2O (1) has been synthesized from 1,4-bis[4-nitrile-pyridine)-N-methylene]phenyldibromide (L1) and (NH4)6Mo7- O24·4H2O by hydrothermal method. The structure has been confirmed through single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra. The adsorption property of compound 1 has bee studied, Thus it’s much important to enrich the types of chemicals.

Anthraquinone Covalent Organic Framework Hollow Tubes as Binder Microadditives in Li-S Batteries

The exploration of new application forms of covalent organic frameworks (COFs) in Li-S batteries that can overcome drawbacks like low conductivity or high loading when typically applied as sulfur host materials (mostly ≈20 to ≈40 wt % loading in cathode) is desirable to maximize their low-density advantage to obtain lightweight, portable, or high-energy-density devices. Here, we establish that COFs could have implications as microadditives of binders (≈1 wt % in cathode), and a series of anthraquinone-COF based hollow tubes have been prepared as model microadditives. The microadditives can strengthen the basic properties of the binder and spontaneously immobilize and catalytically convert lithium polysulfides, as proved by density functional calculations, thus showing almost doubly enhanced reversible capacity compared with that of the bare electrode.

Preparation and application of two novel supramolecular polyoxmetalates with adsorption of organic contaminants in wastewater

Two new supramolecular polyoxmetalates were synthesized from 1, 4-bis[4-nitrile-pyridine)-N-methylene]phenyldibromide (L1) and 1, 2-bis[4-nitrile-pyridine)-N-methylene]phenyldibromide (L2) and (NH4)6Mo7–O24·4H2O under hydrothermal conditions. They are named p-[C20H18N2O4][Mo8O26] 0.5·H2O (1) and o-[C20H18N2O4][Mo8O26] ċ 0.5·H2O (2) respectively. The structures have been confirmed through single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra. The adsorption test of compound 1 and compound 2 in organic dyes were carried out. It was found that compound 1 had a good adsorption effect on methylene blue (MB) and rhodamine B (RhB). The adsorption effect of compound 2 on MB is stronger than that of compound 1.

Constructing Hierarchically Porous N-Doped Carbons Derived from Poly(ionic liquids) with the Multifunctional Fe-Based Template for CO2 Adsorption

Nitrogen-doped hierarchical porous carbons with a rich pore structure were prepared via direct carbonization of the poly(ionic liquid) (PIL)/potassium ferricyanide compound. Thereinto, the bisvinylimidazolium-based PIL was a desirable carbon source, and potassium ferricyanide as a multifunctional Fe-based template, could not only serve as the pore-forming agent, including metallic components (Fe and Fe3C), potassium ions (etching carbon framework during carbonization), and gas generated during the pyrolysis process, but also introduce the N atoms to porous carbons, which were in favor of CO2 capture. Moreover, the hierarchically porous carbon NDPC-1-800 (NDPC, nitrogen-doped porous carbon) had taken advantage of the highest specific surface area, exhibiting an excellent CO2 adsorption capacity and selectivity compared with NDC-800 (NDC, nitrogen-doped carbon) directly carbonized from the pure PIL. Furthermore, its hierarchical porous architectures played an important part in the process of CO2 capture, which was described briefly as follows: the synergistic effect of mesopores and micropores could accelerate the CO2 molecules' transportation and storage. Meanwhile, the appropriate microporous size distribution of NDPC-1-800 was conducive to enhancing CO2/N2 selectivity. This study was intended to open up a new pathway for designing N-doped porous carbons combining both PILs and the multifunctional Fe-based template potassium ferricyanide with wonderful gas adsorption and separation performance.

Adsorption of carbon dioxide on TEPA-modified TiO2/titanate composite nanorods

CO₂was successfully chemisorbed/physisorbed on a TiO₂/titanate composite nanorod functionalized with TEPA amine.

Hydroxyl-Exchanged Nanoporous Ionic Copolymer toward Low-Temperature Cycloaddition of Atmospheric Carbon Dioxide into Carbonates

An ionic copolymer catalyst with nanopores, large surface area, high ionic density, and superior basicity was prepared via the radical copolymerization of amino-functionalized ionic liquid bromide and divinylbenzene, followed with a hydroxyl exchange for removing bromonium. Evaluated in chemical fixation of CO2 with epoxides into cyclic carbonates in the absence of any solvent and basic additive, the nanoporous copolymer catalyst showed high and stable activity, superior to various control catalysts including the halogen-containing analogue. Further, high yields were obtained over a wide scope of substrates including aliphatic long carbon-chain alkyl epoxides and internal epoxide, even under atmospheric pressure and less than 100 °C for the majority of the substrates. On the basis of in situ Fourier transform infrared (FT-IR) investigation and density functional theory (DFT) calculation for the reaction intermediates, we proposed a possible reaction mechanism accounting for the superior catalytic activity of the ionic copolymer. The specifically prepared ionic copolymer material of this work features highly stable, noncorrosive, and sustainable catalysis and, thus, may be a new possibility for efficient chemical fixation of CO2 since it is an environmentally friendly, metal-free solid catalyst.

From Azo-Linked Polymers to Microporous Heteroatom-Doped Carbons: Tailored Chemical and Textural Properties for Gas Separation

Heteroatom-doped porous carbons with ultrahigh microporosity were prepared from a nitrogen-rich azo-linked polymer (ALP-6) as a precursor for gas separation applications. Direct carbonization and chemical activation of ALP-6 with ZnCl2 and KOH were successfully applied to obtain three different classes of porous carbons (ALPDCs). Synthetic processes were conducted at relatively mild temperatures (500-800 °C),which resulted in retention of appreciable levels of nitrogen content (4.7-14.3 wt %). Additionally, oxygen functionalities were found to be present in chemically activated samples. The resultant porous carbons feature a diverse range of textural properties with a predominant microporous nature in common. The highest CO2 uptake value of 5.2 mmol g(-1) at 1 bar and 298 K in ALPDCK600 was originated from well-developed porosity and basic heteroatoms (N and O) on the pore walls. The highest heteroatom doping level (12 wt % nitrogen and 20 wt % oxygen) coupled with the high level of microporosity (84%) for ALPDCK500 led to notable CO2/N2 (62) and CO2/CH4 (11) selectivity values and a high CO2 uptake capacity (1.5 mmol g(-1), at 0.15 bar) at 298 K. This study illustrates the effective use of a single-source precursor with robust nitrogen bonds in combination with diverse carbonization methods to tailor the chemical and textural properties of heteroatom-doped porous carbons for CO2 capture and separation applications.

Enhanced selective adsorption of CO2 on nitrogen-doped porous carbon monoliths derived from IRMOF-3

The N-doped porous carbon monoliths prepared by direct carbonization of IRMOF-3, through an in situ activation and self-templating process, were found to exhibit significantly enhanced performance for the selective adsorption of CO₂ compared to pristine IRMOF-3.