High Strength Multifunctional Multiwalled Hydrogel Tubes: Ion-Triggered Shape Memory, Antibacterial, and Anti-inflammatory Efficacies

Unlocking the potential of stimuli-responsive biomaterials for bone regeneration

Bone defects caused by tumors, osteoarthritis, and osteoporosis attract great attention. Because of outstanding biocompatibility, osteogenesis promotion, and less secondary infection incidence ratio, stimuli-responsive biomaterials are increasingly used to manage this issue. These biomaterials respond to certain stimuli, changing their mechanical properties, shape, or drug release rate accordingly. Thereafter, the activated materials exert instructive or triggering effects on cells and tissues, match the properties of the original bone tissues, establish tight connection with ambient hard tissue, and provide suitable mechanical strength. In this review, basic definitions of different categories of stimuli-responsive biomaterials are presented. Moreover, possible mechanisms, advanced studies, and pros and cons of each classification are discussed and analyzed. This review aims to provide an outlook on the future developments in stimuli-responsive biomaterials.

Shape Memory Hydrogels for Biomedical Applications

The ability of shape memory polymers to change shape upon external stimulation makes them exceedingly useful in various areas, from biomedical engineering to soft robotics. Especially, shape memory hydrogels (SMHs) are well-suited for biomedical applications due to their inherent biocompatibility, excellent shape morphing performance, tunable physiochemical properties, and responsiveness to a wide range of stimuli (e.g., thermal, chemical, electrical, light). This review provides an overview of the unique features of smart SMHs from their fundamental working mechanisms to types of SMHs classified on the basis of applied stimuli and highlights notable clinical applications. Moreover, the potential of SMHs for surgical, biomedical, and tissue engineering applications is discussed. Finally, this review summarizes the current challenges in synthesizing and fabricating reconfigurable hydrogel-based interfaces and outlines future directions for their potential in personalized medicine and clinical applications.

Tough Hydrogels for Load-Bearing Applications

Tough hydrogels have emerged as a promising class of materials to target load-bearing applications, where the material has to resist multiple cycles of extreme mechanical impact. A variety of chemical interactions and network architectures are used to enhance the mechanical properties and fracture mechanics of hydrogels making them stiffer and tougher. In recent years, the mechanical properties of tough, high-performance hydrogels have been benchmarked, however, this is often incomplete as important variables like water content are largely ignored. In this review, the aim is to clarify the reported mechanical properties of state-of-the-art tough hydrogels by providing a comprehensive library of fracture and mechanical property data. First, common methods for mechanical characterization of such high-performance hydrogels are introduced. Then, various modes of energy dissipation to obtain tough hydrogels are discussed and used to categorize the individual datasets helping to asses the material's (fracture) mechanical properties. Finally, current applications are considered, tough high-performance hydrogels are compared with existing materials, and promising future opportunities are discussed.

A Cu@ZIF-8 encapsulated antibacterial and angiogenic microneedle array for promoting wound healing

Skin wounds caused by external injuries remain a serious challenge in clinical practice. Wound dressings that are antibacterial, pro-angiogenic, and have potent regeneration capacities are highly desirable for wound healing. In this study, a minimally invasive and wound-friendly Cu@ZIF-8 encapsulated PEGDA/CMCS microneedle (MN) array was fabricated using the molding method to promote wound healing. The MNs had good biocompatibility, excellent mechanical strength, as well as strong antibacterial properties and pro-angiogenic effects. When incubated with H2O2, Cu@ZIF-8 nanoparticles generated reactive oxygen species, which contributed to their antibacterial properties. Due to the oxidative stress of the cupric ions released from Cu@ZIF-8 and the anti-bacterial capability of the PEGDA/CMCS hydrogel scaffold, such an MN array presents excellent antibacterial activity. Moreover, with the continuous release of Cu ions from the scaffold, such MNs are effective in terms of promoting angiogenesis. With considerable biocompatibility and a minimally invasive approach, the degradable MN array composed of PEGDA/CMCS possessed superior capabilities to continuously and steadily release the loaded ingredients and avoid secondary damage to the wound. Benefiting from these features, the Cu@ZIF-8 encapsulated degradable MN array can dramatically accelerate epithelial regeneration and neovascularization. These results indicated that the combination of Cu@ZIF-8 and degradable MN arrays is valuable in promoting wound healing, which opened a new window for treatment of skin defection.

Polyphosphate as an antithrombotic target and hemostatic agent

Polyphosphate (PolyP) is a polymer comprised of linear phosphate units connected by phosphate anhydride bonds. PolyP exists in a diverse range of eukaryotes and prokaryotes with varied chain lengths ranging from six to thousands of phosphate units. Upon activation, human platelets and neutrophils release short-chain PolyP, along with other components, to initiate the coagulation pathway. Long-chain PolyP derived from cellular or bacterial organelles exhibits higher proinflammatory and procoagulant effects compared to short-chain PolyP. Notably, PolyP has been identified as a low-hemorrhagic antithrombotic target since neutralizing plasma PolyP suppresses the thrombotic process without impairing the hemostatic functions. As an inorganic polymer without uniform steric configuration, PolyP is typically targeted by cationic polymers or recombinant polyphosphatases rather than conventional antibodies, small-molecule compounds, or peptides. Additionally, because of its procoagulant property, PolyP has been incorporated in wound-dressing materials to facilitate blood hemostasis. This review summarizes current studies on PolyP as a low-hemorrhagic antithrombotic target and the development of hemostatic materials based on PolyP.

Immunomodulatory zinc-based materials for tissue regeneration

Zinc(Zn)-based materials have contributed greatly to the rapid advancements in tissue engineering. The qualities they possess that make them so beneficial include their excellent biodegradability, biocompatibility, anti-bacterial activity, among and several others. Biomedical materials that act as a foreign body, will inevitably cause host immune response when introduced to the human body. As the osteoimmunology develops, the immunomodulatory characteristics of biomaterials have become an appealing concept to improve implant-tissue interaction and tissue restoration. Recently, Zn-based materials have also displayed immunomodulatory functions, especially macrophage polarization states. It can promote the transformation of M1 macrophages into M2 macrophages to enhance the tissue regeneration and reconstruction. This review covers mainly Zn-based materials and their characteristics, including metallic Zn alloys and Zn ceramics. We highlight the current advancements in the type of immune responses, as well as the mechanisms, that are induced by Zn-based biomaterials, most importantly the regulation of innate immunity and the mechanism of promoting tissue regeneration. To this end, we discuss their applications in biomedicine, and conclude with an outlook on future research challenges.

High-Strength and Injectable Supramolecular Hydrogel Self-Assembled by Monomeric Nucleoside for Tooth-Extraction Wound Healing

Hydrogels with high mechanical strength and injectability have attracted extensive attention in biomedical and tissue engineering. However, endowing a hydrogel with both properties is challenging because they are generally inversely related. In this work, by constructing a multi-hydrogen-bonding system, a high-strength and injectable supramolecular hydrogel is successfully fabricated. It is constructed by the self-assembly of a monomeric nucleoside molecular gelator (2-amino-2'-fluoro-2'-deoxyadenosine (2-FA)) with distilled water/phosphate buffered saline as solvent. Its storage modulus reaches 1 MPa at a concentration of 5.0 wt%, which is the strongest supramolecular hydrogel comprising an ultralow-molecular-weight (MW < 300) gelator. Furthermore, it exhibits excellent shear-thinning injectability, and completes the sol-gel transition in seconds after injection at 37 °C. The multi-hydrogen-bonding system is essentially based on the synergistic interactions between the double NH₂ groups, water molecules, and 2'-F atoms. Furthermore, the 2-FA hydrogel exhibits excellent biocompatibility and antibacterial activity. When applied to rat molar extraction sockets, compared to natural healing and the commercial hemorrhage agent gelatin sponge, the 2-FA hydrogel exhibits faster degradation and induces less osteoclastic activity and inflammatory infiltration, resulting in more complete bone healing. In summary, this study provides ideas for proposing a multifunctional, high-strength, and injectable supramolecular hydrogel for various biomedical engineering applications.

Advances in Ultrasound-Responsive Hydrogels for Biomedical Applications

Various intelligent hydrogels have been developed for biomedical applications because they can achieve multiple, variable, controllable and reversible changes in their shape and properties in a spatial and temporal manner,...

Solution-Processable Conductive Composite Hydrogels with Multiple Synergetic Networks toward Wearable Pressure/Strain Sensors

A biocompatible, flexible, yet robust conductive composite hydrogel (CCH) for wearable pressure/strain sensors has been achieved by an all-solution-based approach. The CCH is rationally constructed by in situ polymerization of aniline (An) monomers in the polyvinyl alcohol (PVA) matrix, followed by the cross-linking of PVA with glutaraldehyde (GA) as the cross-linker. The unique multiple synergetic networks in the CCH including strong chemical covalent bonds and abundance of weak physical cross-links, i.e., hydrogen bondings and electrostatic interactions, impart excellent mechanical strength (a fracture tensile strength of 1200 kPa), superior compressibility (ε = 80%@400 kPa), outstanding stretchability (a fracture strain of 670%), high sensitivity (0.62 kPa^-1 at a pressure range of 0-1.0 kPa for pressure sensing and a gauge factor of 3.4 at a strain range of 0-300% for strain sensing, respectively), and prominent fatigue resistance (1500 cycling). As the flexible wearable sensor, the CCH is able to monitor different types of human motion and diagnostically distinguish speaking. As a proof of concept, a sensing device has been designed for the real-time detection of 2D distribution of weight or pressure, suggesting its promising potentials for electronic skin, human-machine interaction, and soft robot applications.

Synthesis of Poly(ε-caprolactone) Diacrylate for Micelle-Cross-Linked Sodium AMPS Hydrogel for Use as Controlled Drug Delivery Wound Dressing

This study focuses on the synthesis of poly(ε-caprolactone) diacrylate (PCLDA) for the fabrication of micelle-cross-linked sodium AMPS wound dressing hydrogels. The novel synthetic approach of PCLDA is functionalizing a PCL diol with acrylic acid. The influences of varying the PCL diol/AA molar ratio and temperature on the suitable conditions for the synthesis of PCLDA are discussed. The hydrogel was synthesized through micellar copolymerization of sodium 2-acrylamido-2-methylpropane sulfonate (Na-AMPS) as a basic monomer and PCLDA as a hydrophobic association monomer. In this study, an attempt was made to develop new hydrogel wound dressings meant for the release of antibacterial drugs (ciprofloxacin and silver sulfadiazine). The chemical structures, morphology, porosity, and water interaction of the hydrogels were characterized. The hydrogels' swelling ratio and water vapor transmission rate (WVTR) showed a high swelling capacity (4688-10753%) and good WVTR (approximately 2000 g·m^-2·day^-1), which can be controlled through variation of the PCLDA concentration. The mechanical property results confirmed that PCLDA improved the mechanical properties of the hydrogel; the stress increased from 37 to 68 kPa, and the strain increased from 198 to 360% with increasing PCLDA (0-30% wt of Na-AMPS). These hydrogels presented no cytotoxicity based on over 70% cell viability responses (L929 fibroblasts) using an in vitro 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Additionally, the drug release mechanism, kinetic models, and antibacterial activity were determined. The results demonstrated that antibiotics were released from the hydrogel with a Fickian diffusion mechanism and antibacterial activity against Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus). Based on the results obtained, and bearing in mind that further progress still needs to be made, the fabricated hydrogels show considerable potential for meeting the stringent property requirements of hydrogel wound dressings.

Shape memory materials and 4D printing in pharmaceutics

Shape memory materials (SMMs), including alloys and polymers, can be programmed into a temporary configuration and then recover the original shape in which they were processed in response to a triggering external stimulus (e.g. change in temperature or pH, contact with water). For this behavior, SMMs are currently raising a lot of attention in the pharmaceutical field where they could bring about important innovations in the current treatments. 4D printing involves processing of SMMs by 3D printing, thus adding shape evolution over time to the already numerous customization possibilities of this new manufacturing technology. SMM-based drug delivery systems (DDSs) proposed in the scientific literature were here reviewed and classified according to the target pursued through the shape recovery process. Administration route, therapeutic goal, temporary and original shape, triggering stimulus, main innovation features and possible room for improvement of the DDSs were especially highlighted.

Hemostatic Self-Healing Hydrogel with Excellent Biocompatibility Composed of Polyphosphate-Conjugated Functional PNIPAM-Bearing Acylhydrazide

Biocompatible self-healing hydrogels present an effective application as drug-releasing vehicles for tissue engineering and wound repairing. At the same time, the effective hemostatic property of the hydrogels also improves the application property as wound dressing materials. In this research, the PNIPAM-bearing acylhydrazide P(NIPAM-co-AH) was synthesized and then hemostatic polyphosphate (PolyP) was imported to prepare polyphosphate-conjugated P(NIPAM-co-AH) (PNAP). Through the acylhydrazone connection of PNAP and aldehyde functional PEO (PEO DA), the self-healing hydrogel with a hemostatic property was fabricated with good flexibility and sealing effect. The resultant hydrogels kept excellent biocompatibility and showed controlled drug release behavior. More importantly, the hydrogel accelerated the coagulation rate in vitro and presented a strong hemostatic effect as the binder in the hemorrhage model in vivo, which endow the hemostatic hydrogel with a very useful drug delivery carrier for wound healing applications or first aid treatment of the wounded in critical situations.

Robust and Antiswelling Hollow Hydrogel Tube with Antibacterial and Antithrombotic Ability for Emergency Vascular Replacement

Infection and thrombosis are the two major complications in almost any indwelling intravascular catheters, leading to adverse consequences. Here, we report a robust and antiswelling hollow hydrogel tube that is prepared by copolymerizing a hydrogen-bonding (H-bonding) monomer and a zinc methacrylate (ZMA) monomer in the absence of any chemical cross-linker. The strong H-bonding interactions from the side chain of N-acryloylsemicarbazide (NASC) endow the hydrogel with high mechanical strength and swelling stability. Introduction of ZMA affords a superhydrophilic surface, and the release of a zinc ion (Zn²⁺) from the hydrogel can kill nearly 100% both of Staphylococcus aureus and Escherichia coli, indicating its excellent antibacterial ability. Importantly, the P(NASC-co-ZMA) hydrogel exhibits better antithrombosis ability due to the resistant adhesion of fibrinogen protein and platelets, as well binding calcium ions (Ca²⁺) from the blood. The hydrogel tube is used to connect the ex vivo arteriovenous shunt circuit or implanted into the left carotid artery in the rabbit model, showing a better patency rate. All of these results suggest that this hydrogel tube may mitigate infection and thrombosis complications, thus holding potential as an artificial blood vessel for emergency vascular replacement.

Acid- and Thiol-Cleavable Multifunctional Codelivery Hydrogel: Fabrication and Investigation of Antimicrobial and Anticancer Properties

Hydrogels serving as a drug carrier was realized by entrapping small-sized drug molecules within their cross-linked interstitial networks. After covering the targeted location, hydrogels interact with the physiological fluids and swell, resulting in an increased interspace between networks for the outside diffusion of drugs. However, inevitable in vivo inflammatory responses or bacterial infection on the implant materials and persistent cargo release are still challenging. Herein, we report the fabrication of dual-responsive hydrogels based on acid-sensitive poly(ethylenimine) (PEI) derivative (PEI(-COOH/-vinyl)), thiol-responsive camptothecin prodrug monomer (CPTM), and hydrophilic oligo(ethylene glycol) methyl ether acrylate (OEGMA) by a conventional radical polymerization. Curcumin was then solubilized into the hydrogels to endow them with antimicrobial and cancer resistance properties. The in vitro experiments exhibited sustained hydrogel dissolution and CPT release in a simulated physiological environment. The antimicrobial and cytotoxicity tests of drug-loaded hydrogels using methicillin-resistant Staphylococcus aureus (MRSA) strains and HeLa cancer cell lines, respectively, indicated that the hydrogels possessed efficient antimicrobial effects and could successfully inhibit the growth of cancer cells.

A pH controlled temperature response reprogramming hydrogel for monitoring human electrophysiological signals

This study proposes a simple method to prepare a pH-responsive and shape memory hydrogel based on cooperative hydrophobic interaction and hydrogen bonding. Acryloyl 11-aminoundecanoic acid (A11AUA) and acrylamide were selected as hydrophobic monomers and hydrophilic monomers, respectively. The mechanical properties of the prepared hydrogel strongly depend on the pH. Under acidic conditions, the maximum tensile strength of the hydrogel can reach 7.8 MPa, and the tensile modulus of the hydrogel can be increased by more than 10 000 times. The mechanical properties of acidic gels are affected by temperature and exhibit a temperature-controlled shape memory function. The acidic gel is immersed in NaOH and HCl solutions in sequence to achieve the function of reprogramming. Hydrogels under alkaline and neutral conditions exhibit conductivity and adhesion properties controlled by pH. Using the hydrogel as an adhesive electrode, the performance of the hydrogel in monitoring human electrophysiological signals was discussed.

Antibacterial Zwitterionic Polyelectrolyte Hydrogel Adhesives with Adhesion Strength Mediated by Electrostatic Mismatch

Biotissue adhesives and antibacterial materials have great potential applications in wound dressing, implantable devices, and bioelectronics. In this study, stretchable tissue adhesive hydrogels with intrinsic antibacterial properties have been demonstrated by copolymerizing zwitterionic monomers with ionic monomers. The hydrogels are stretchable to about 900% strain and show a modulus of 4-9 kPa. The zwitterionic moieties provide strong dipole-dipole interaction, electrostatic interaction, and hydrogen bonding with the skin surface, and thus show adhesion strength values of 1-4 kPa to skin. Meanwhile, the copolymerized cationic or anionic monomers break the intrinsic electrostatic stoichiometry of the zwitterionic units and thus mediate the electrostatic interactions and the adhesion strength with the surface. The stretchable hydrogels form a robust and compliant (due to low modulus and stretchability) adhesive to skin, rubber, glass, and plastics, and could be repeatedly peeled-off and readhered to the skin. Moreover, the abundant quaternary ammonium (QA) groups in the zwitterionic moieties and the added QA groups endow it outstanding antibacterial properties (>99%). These stretchable tissue adhesive antibacterial hydrogels are promising for wound dressings and implantable devices.

Mechanically Strong, Tough, and Shape Deformable Poly(acrylamide-co-vinylimidazole) Hydrogels Based on Cu2+ Complexation

Shape deformable hydrogels have drawn great attention due to their wide applications as soft actuators. Here we report a novel kind of mechanically strong, tough, and shape deformable poly(acrylamide-co-vinylimidazole) [poly(AAm-co-VI)] hydrogel prepared by photoinitiated copolymerization and the followed immersing in a Cu²⁺ aqueous solution. Strong Cu²⁺ complexation with imidazole groups dramatically enhances the mechanical properties of the hydrogels, whose tensile strength, elastic modulus, toughness, and fracture energy reach up to 7.7 ± 0.76 MPa, 15.4 ± 1.2 MPa, 23.2 ± 2.5 MJ m^-3, and 22.1 ± 2.3 kJ m^-2, respectively. More impressively, shape deformation (bending) can be easily achieved by coating Cu²⁺ solution on one side of hydrogel strips. Furthermore, precise control of the shape deformation from 1D to 2D and 2D to 3D can be achieved by adjusting Cu²⁺ concentration, coating time, region, and one or two side(s) of hydrogel samples. The Cu²⁺ complexation provides a simple way to simultaneously improve the mechanical properties of hydrogels and enable them with shape deformability. The mechanically strong, tough, and shape deformable hydrogels might be a promising candidate for soft actuators.

Preparation of antibacterial and osteoconductive 3D-printed PLGA/Cu(I)@ZIF-8 nanocomposite scaffolds for infected bone repair

BACKGROUND

The repair of large bone defects is a great challenge in clinical practice. In this study, copper-loaded-ZIF-8 nanoparticles and poly (lactide-co-glycolide) (PLGA) were combined to fabricate porous PLGA/Cu(I)@ZIF-8 scaffolds using three-dimensional printing technology for infected bone repair.

METHODS

The surface morphology of PLGA/Cu(I)@ZIF-8 scaffolds was investigated by transmission electron microscopy and scanning electron microscopy. The PLGA/Cu(I)@ZIF-8 scaffolds were co-cultured with bacteria to determine their antibacterial properties, and with murine mesenchymal stem cells (MSCs) to explore their biocompatibility and osteoconductive properties. The bioactivity of the PLGA/Cu(I)@ZIF-8 scaffolds was evaluated by incubating in simulated body fluid.

RESULTS

The results revealed that the PLGA/Cu(I)@ZIF-8 scaffolds had porosities of 80.04 ± 5.6% and exhibited good mechanical properties. When incubated with H₂O₂, Cu(I)@ZIF-8 nanoparticles resulted generated reactive oxygen species, which contributed to their antibacterial properties. The mMSCs cultured on the surface of PLGA/Cu(I)@ZIF-8 scaffolds were well-spread and adherent with a high proliferation rate, and staining with alkaline phosphatase and alizarin red was increased compared with the pure PLGA scaffolds. The mineralization assay showed an apatite-rich layer was formed on the surface of PLGA/Cu(I)@ZIF-8 scaffolds, while there was hardly any apatite on the surface of the PLGA scaffolds. Additionally, in vitro, Staphylococcus aureus cultured on the PLGA/Cu(I)@ZIF-8 scaffolds were almost all dead, while in vivo inflammatory cell infiltration and bacteria numbers were dramatically reduced in infected rats implanted with PLGA/Cu@ZIF-8 scaffolds.

CONCLUSION

All these findings demonstrate that PLGA/Cu(I)@ZIF-8 scaffolds possess excellent antibacterial and osteoconductive properties, as well as good biocompatibility and high bioactivity. This study suggests that the PLGA/Cu(I)@ZIF-8 scaffolds could be used as a promising biomaterial for bone tissue engineering, especially for infected bone repair.

Continuous liquid interface production of alginate/polyacrylamide hydrogels with supramolecular shape memory properties

A recently developed three-dimensional (3D) gel-printing technology, namely continuous liquid interface production (CLIP), was utilized to fabricate supramolecular shape memory hydrogels with high resolutions and complex 3D geometries. The UV-curable ink for CLIP was composed of hydrogel precursors (alginate and acrylamide) and a photo-initiator (ammonium persulfate). As expected, the double network formed from ionically crosslinked alginate and covalently crosslinked polyacrylamide endowed the printed hydrogels with excellent mechanical properties. Meanwhile, due to the reversible metal-ligand coordination interaction, the hydrogel could be temporarily immobilized into an optional shape after introducing calcium ions and return to its original shapes upon ion removal, exhibiting ion-triggered shape memory effect. Moreover, the presence of ions greatly improved the conductivity of the resultant hydrogels. Such 3D printed versatile hydrogels with complex geometries demonstrated the potential for selected applications, particularly in load-bearing materials and flexible electronic devices.

Highly Tough Hydrogels with the Body Temperature-Responsive Shape Memory Effect

Shape memory hydrogels (SMHs), a promising class of smart materials for biomedical applications, have attracted increasing research attention owing to their tissue-like water-rich network structure. However, preparing SMHs with high mechanical strength and body temperature-responsiveness has proven to be an extreme challenge. This study presents a facile and scalable methodology to prepare highly tough hydrogels with a body temperature-responsive shape memory effect based on synergetic hydrophobic interactions and hydrogen bonding. 2-Phenoxyethyl acrylate (PEA) and acrylamide were chosen as the hydrophobic monomer and the hydrophilic hydrogen bonding monomer, respectively. The prepared hydrogels exhibited a maximum tensile strength of 5.1 ± 0.16 MPa with satisfactory stretchability, and the mechanical strength showed a strong dependence on temperature. Besides, the hydrogel with 60 mol % PEA shows an excellent body temperature-responsive shape memory behavior with almost 100% shape fixity and shape recovery. Furthermore, we applied the hydrogels as a shape memory embolization plug for simulating vascular occlusion, and the embolism performance was preliminarily explored in vitro.

High strength hydrogels with multiple shape-memory ability based on hydrophobic and electrostatic interactions

Hydrogels with multiple shape-memory ability have aroused great interest due to their promising applications in various fields. Nevertheless, the weak mechanical performance of most shape-memory hydrogels seriously impedes the practical application in more complex environments. Herein, we reported a novel hydrogel with both high mechanical and multi-shape memory properties composed of stearyl methacrylate (SMA), acrylic acid (AA) and quaternary chitosan (QCH). The electrostatic interactions between AA and QCH together with the hydrophobic interactions of alkyl chains in SMA endowed the hydrogel with great strain-stress and fatigue resistance. Furthermore, due to the reversible destruction and construction of physical cross-links, the prepared hydrogels also exhibited the shape-memory ability in response to different stimuli, such as temperature, pH and NaCl solution. Additionally, the multiple shape-memory effect could be accomplished via programmable combination because of the relatively independent physical interactions in the hydrogels.

Antifreezing Heat-Resistant Hollow Hydrogel Tubes

Hollow hydrogel tubes that are capable of maintaining their flexibility and structural stability in extreme temperature conditions have potential for use in biomedical scaffolds, carriers, and soft robotics over a wide temperature range. However, the preparation of hollow hydrogel tubes still remains challenging because it normally requires templates or complex devices and it is hard to endow the hollow tubes with antifreezing heat-resistant capabilities. We report a protocol that does not require a template or complex devices, in which sodium alginate film strips are immersed in an aqueous mixture of CaCO₃, CaCl₂, NaHCO₃, and HCl, which results in the manufacture of hollow tubes in 30 min. These hollow tubes are functionalized by glycerol and poly(ethylene glycol), which provides the tubes with antifreezing heat-resistant performances and enables them to keep their flexibility and hollow structures from -70 to 120 °C. This is the first report on antifreezing heat-resistant hollow hydrogel tubes, to the best of our knowledge. Such hollow tubes as carriers can control the sublimation of a mothball at a rate of 1.1 mg/h, which is one-tenth of the sublimating rate of an unloaded mothball. This sublimating rate reduces the hazard to environments along with maintaining the repellent effects. As the tube is a honey carrier, it enables the sustainable release of the honey over 800 min with a high efficacy for tricking and capturing ants. The simple applications demonstrate that the antifreezing heat-resistant hollow tubes might be feasible as carriers for the controlled release in extremely cold/hot environments.

A pH-induced self-healable shape memory hydrogel with metal-coordination cross-links

A 4-armed PEG–DA hydrogel was fabricated, which showed regulated shape memory and self-healing properties at different pH values.

Trends in polymeric shape memory hydrogels and hydrogel actuators

Recently, “smart” hydrogels with either shape memory behavior or reversible actuation have received particular attention and have been further developed into sensors, actuators, or artificial muscles.

Rigid and Strong Thermoresponsive Shape Memory Hydrogels Transformed from Poly(vinylpyrrolidone- co-acryloxy acetophenone) Organogels

Shape memory hydrogels (SMHs) have a wide range of potential practical applications. However, the mechanically weak and soft nature of most SMHs strongly impedes their applications. Here, we report a novel kind of thermal-responsive SMH with high tensile strength and high elastic moduli. Organogels are first prepared by the copolymerization of a hydrophilic monomer N-vinylpyrrolidone (NVP) and a hydrophobic monomer acryloxy acetophenone (AAP) in N, N'-dimethylformamide (DMF) solutions, and then, poly(vinylpyrrolidone- co-acryloxy acetophenone) [poly(NVP- co-AAP)] hydrogels are obtained by solvent exchange with water. Because of the strong and reversible hydrophobic association and π-π stacking of acetophenone groups, the poly(NVP- co-AAP) hydrogels exhibit tensile strengths up to 8.41 ± 0.83 MPa and Young's moduli up to 94.2 ± 1.3 MPa, which are more than 1 or 3 orders of magnitude higher than those of the organogels, respectively. The poly(NVP- co-AAP) hydrogels exhibit good shape memory behaviors, with a complete fixation ratio and a recovery ratio of 74-89%, as well as very fast shape-fixing and recovering rates (in seconds). These rigid and strong hydrogels are demonstrated to be an ideal shape memory material for surgical fixation devices to wrap around and support various shapes of limbs.

Temperature-Controllable Hydrogels in Double-Walled Microtube Structure Prepared by Using a Triple Channel Microfluidic System

Hydrogels in the shape of double-walled microtubes possess great potential for development into artificial human blood vessels. In this work, we have prepared temperature-responsive tubular hydrogels with selectively controllable wall diameters, by using alginate templated photopolymerization in a triple channel microfluidic device. These tubular hydrogels mimic human blood vessels because of the separate thermally active inner and passive outer walls. The different behavior of each wall leads to the expansion of the hollow center volume with increasing temperature. This temperature-based control of the hollow center volume cannot be achieved in the case of conventional hydrogel microtubes. Furthermore, through this method, the hydrogels can be modified to achieve a controllable outer diameter while maintaining the hollow center dimensions simply by changing the position of the hydrogel walls. The ability to change the layer properties of the developed system indicates that the preparation of hydrogels with various monomers is possible.

Poly(vinyl diaminotriazine): From Molecular Recognition to High-Strength Hydrogels

Poly(2-vinyl-4,6-diamino-1,3,5-triazine), (PVDT) with diaminotriazine residues is found to form not only intramolecular hydrogen bonds, but also three robust, complementary hydrogen bonds with nucleobases such as thymine and uracil. Taking advantage of the three complementary hydrogen bonds, molecular recognition of a nucleic acid base has been investigated in previous work. Over the past few years, the use of PVDT has been extended to the construction of gene delivery vectors and nonswellable, high-strength hydrogels by copolymerization with a hydrophilic monomer and/or crosslinker. In particular, many fascinating properties, such as excellent mechanical properties, stimuli responsiveness, the shape memory effect, and biodegradability, have emerged in PVDT-based hydrogels. In this article, the molecular recognition and self-assembly of diaminotriazine are introduced first, and then a particular focus is placed on the development of PVDT-based high performance hydrogels, especially their biorelated applications.

Dual-Crosslink Physical Hydrogels with High Toughness Based on Synergistic Hydrogen Bonding and Hydrophobic Interactions

Constructing dual or multiple noncovalent crosslinks is highly effective to improve the mechanical and stimuli-responsive properties of supramolecular physical hydrogels, due to the synergistic effects of different noncovalent bonds. Herein, a series of tough physical hydrogels are prepared by solution casting and subsequently swelling the films of poly(ureidopyrimidone methacrylate-co-stearyl acrylate-co-acrylic acid). The hydrophobic interactions between crystallizable alkyl chains and the quadruple hydrogen bonds between ureidopyrimidone (UPy) motifs serve as the dual crosslinks of hydrogels. Synergistic effects between the hydrophobic interactions and hydrogen bonds render the hydrogels excellent mechanical properties, with tensile breaking stress up to 4.6 MPa and breaking strain up to 680%. The UPy motifs promote the crystallization of alkyl chains and the hydrophobic alkyl chains also stabilize UPy-UPy hydrogen bonding. The resultant hydrogels are responsive to multiple external stimuli, such as temperature, pH, and ion; therefore, they show the thermal-induced dual and metal ion-induced triple shape memory behaviors.

General Strategy to Fabricate Highly Filled Microcomposite Hydrogels with High Mechanical Strength and Stiffness

Conventional synthetic hydrogels are intrinsically soft and brittle, which severely limits the scope of their applications. A variety of approaches have been proposed to improve the mechanical strength of hydrogels. However, a facile and ubiquitous strategy to prepare hydrogels with high mechanical strength and stiffness is still a challenge. Here, we report a general strategy to prepare highly filled microcomposite hydrogels with high mechanical performance using an ultrasonic assisted strategy. The microparticles were dispersed in the polymer network evenly, resulting in homogeneous and closely packed structures. The as-prepared hydrogels with extraordinary mechanical performance can endure compressive stress up to 20 MPa (at 75% strain) and exhibit high stiffness (elastic modulus is around 18 MPa). By using our comprehensive strategy, different hydrogels can enhance their mechanical strength and stiffness by doping various microparticles, leading to a much wider variety of applications.

Hollow hydrogel networks for temperature-controlled water fluidics

A simple, yet robust, reproducible and scalable method for direct conversion of sodium alginate (SA) films to multibranched hydrogel tubes (HTs) in “one-pot” reaction of buffered aqueous solution is reported.

Ca2+, redox, and thermoresponsive supramolecular hydrogel with programmed quadruple shape memory effect

With a new redox-responsive stimulus coupled with two other common regulation mechanisms, this hydrogel shows programmed quadruple shape memory behaviour.

Stereocomplexed physical hydrogels with high strength and tunable crystallizability

Physical hydrogels crosslinked by non-covalent interactions have attained increasing attention due to their good mechanical properties and processability. However, the use of feasible and controllable non-covalent interactions is highly essential for preparing such hydrogels. In this article, we report on stereocomplexed physical hydrogels prepared by simple casting and swelling of amphiphilic graft copolymers bearing a poly(acrylic acid) (PAA) backbone and poly(l-lactic acid) (PLLA) or poly(d-lactic acid) (PDLA) stereocomplexable side chains. The microstructure, swelling behavior, and mechanical and shape memory properties of the obtained hydrogels can be tuned by varying the copolymer composition and stereocomplex (SC) crystallization of PLLA/PDLA enantiomeric chains. The long PLLA or PDLA chains segregate to form hydrophobic, crystallized domains in water, serving as physical crosslinking junctions for hydrogels. SC crystallization between PLLA and PDLA further enhances the number density of physical crosslinkers of enantiomerically mixed hydrogels. The SC content increases as the PLLA/PDLA ratio approaches 1/1 in enantiomerically mixed hydrogels. The average distance between crosslinking junctions declines for the hydrogels with a high PLLA (or PDLA) mass fraction (M_PLA) and SC content, due to the increased number density of physical crosslinkers. Accordingly, the tensile strength and the Young's modulus increase but the swelling ratio and the elongation-at-break of the hydrogels decrease with an increase in M_PLA and SC content. The hydrogels exhibit shape memory behavior; the shape fixing ability is enhanced by the SC crystallization of PLLA/PDLA side chains in the hydrogels.

Shape Memory Polymers Based on Supramolecular Interactions

Shape memory polymers (SMPs), with the capability to change from one or more temporary shapes to predetermined shapes in response to an external stimulus, have attracted much interest from both academia and industries. When introducing supramolecular interactions that have been featured as dynamic and reversible into the design of novel SMPs, intriguing and unique functionalities have been engendered and thereby broaden the potential applications of the SMPs to new territories. In this review, we summarize recent progress made in SMPs based on supramolecular interactions, provide insight into the material design and shape memory mechanism, elucidate and evaluate their properties and performance, and point out opportunities and applications of SMPs.