Phosphonic Acid-Functionalized Polyurethane Dispersions with Improved Adhesion Properties

End-Terminated Poly(urethane-urea) Hybrid Approach toward Nanoporous/Microfilament Morphology

In the present work, the effect of heteroatomic hydrogen bonding on the properties of -OH/-NH-terminated soft-segment-free polymers, viz, polyurethane (P-UT), polyurea (P-UR), and their hybrid (P-UT-UR), is explored. P-UT was synthesized from phloroglucinol and P-UR was synthesized from 1,3,5-triazine-2,4,6-triamine by employing hexamethylene diisocyanate as a counterpart. P-UT exhibited a spherulitic structure with varying sizes, whereas P-UR displayed a fibrillar structure characteristic as that of crystalline hard segments. The P-UT-UR hybrid exhibited a fine nanospherulitic structure with a high order of interconnectivity. Negative surface skewness values of -0.47 and -0.18 were measured (by AFM) for P-UT and P-UT-UR, respectively, which revealed that the surface is not smooth and is covered with features. Due to the increased H-bonding (-N-H···O-H) in P-UT-UR, its transparency decreased. A block copolymer hybrid of urethane-urea was synthesized, which preferred homoatomic H-bonding, whereas random urethane/urea bridges favored hetreoheteroatom H-bonding. A pentafluorophenyl end-functional hybrid (PFI-P-UT-UR) was synthesized, which displayed filaments of ∼2-3 μm length in contrast to the interconnected nanospherulitic structure observed for P-UT-UR. The self-aggregation and end folding led to the formation of a filament structure. By altering the chemical structure slightly, nano-ordered polyurethanes or their hybrids can be achieved.

Taking Advantage of Phosphate Functionalized Waterborne Acrylic Binders to Get Rid of Inhibitors in Direct-to-Metal Paints

In this paper, two phosphate functionalized acrylic binders are formulated to yield direct-to-metal paints without using corrosion inhibitors. The difference between both binders is the addition of polystearylacrylate crystalline nanodomains in one of them, and an amorphous methyl methacylate-co-butyl acrylate copolymer in the other. The water sensitivity, mechanical stability, adhesion, and the performance of the paints against corrosion (high humidity resistance, accelerated weathering, and salt-spray tests) are assessed and compared with a DTM paint formulated from a commercial binder. The performance of both phosphate functionalized paints formulated without corrosion inhibitors in high humidity and weathering tests is superior to the commercial DTM paint formulated without corrosion inhibitors and similar to the DTM paint formulated with them. Furthermore, the paint based on the amorphous copolymer binder provides significantly good performance in the salt spray test (even superior to that of the DTM paint formulated with corrosion inhibitors).

Fabrication of Double-Network Hydrogels with Universal Adhesion and Superior Extensibility and Cytocompatibility by One-Pot Method

Hydrogels, which demand simultaneously tailorable mechanical properties and excellent biocompatibility, act as a promoting material for biomedical applications, e.g., tissue engineering scaffolds, wound dressing materials, and cartilage substitutes. Double-network hydrogels (DN hydrogels) have attracted widespread concerns due to their extraordinary mechanical strength and toughness, while traditional DN hydrogels are limited in terms of their biofunctionality. Based on the DN hydrogels composed of agar and acrylamide (AM), we incorporate vinylphosphoric acid (VPA) into the network to obtain agar/PAM/PVPA hydrogels with universal adhesion and superior cytocompatibility. Meanwhile, the agar/PAM/PVPA hydrogel maintains its high strength and toughness. It is noted that the elongation of the agar/PAM/PVPA hydrogel (molar ratio of VPA is 2%) is up to 3418.9 ± 54.9%. The cell experiment also demonstrates that the addition of VPA in a proper concentration can promote cell adhesion and proliferation. Furthermore, the hydrogel has the potential to be used as 3D printing and injectable materials because of the thermoreversible sol-gel agar. The reported agar/PAM/PVPA hydrogel in this work with universal adhesion, excellent mechanical properties, and excellent cytocompatibility is able to be used for biomedical applications as scaffolds, wound dressing materials, or cartilage repair materials.

Adsorption of sulfamethoxazole and sulfadiazine on phosphorus-containing stalk cellulose under different water pH studied by quantitative evaluation

To improve the high-value application of corn stalk, phosphorus-containing stalk cellulose (PFC) was prepared, characterized, and utilized for the adsorption of sulfamethoxazole (SMZ) and sulfadiazine (SD), with maximum adsorption capacities of 1.385 and 2.527 mg/g at pH 7. As expected, the adsorption efficiency of PFC was strongly affected by pH, and the preferential adsorption order of SMZ^- (SD⁰) > SMZ⁰ (SD^-) > SMZ⁺ (SD⁺) was obtained from the experimental results and due to the charges of PFC and the SMZ and SD species. Furthermore, these results were qualitatively linked to the adsorption mechanism, e.g., π⁺-π electron donor-acceptor (EDA), anion-π bond electrostatic, and hydrophobic interactions. In particular, the adsorption mechanism was further characterized in terms of structure and analyzed systematically using density functional theory (DFT), frontier orbital theory (FOT), and molecular dynamics (MD) simulation, with the aim to explain the theoretical calculation and experimental results. As a result, the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) orbitals revealed the key role of the rings and functional groups of PFC and SMZ (or SD) and validated the optimized structures of PFC⁺ sulfonamides (SAs)⁺, PFC^- SAs⁰, and PFC^- SAs^-, in which their binding energy values, energy gaps, and relevant molecular lengths determined their stability. Additionally, the van der Waals (vdW) energy confirmed the effect of various interactions on adsorption.

Hydrophobilization of Furan-Containing Polyurethanes via Diels-Alder Reaction with Fatty Maleimides

We describe new hydrophobic functionalized linear polyurethane resins by combining N-alkyl maleimides via the Diels–Alder reaction with linear furan-modified polyurethanes. This procedure provides the opportunity for the post-polymerization-functionalizing of polyurethanes. Access to furan-bearing polyurethanes is achieved via the reaction of a furan-containing diol, polyethylenglycol (PEG), and different diisocyanates. The furan-containing diol is obtained from the reaction of furfurylamine and two equivalents of hydroxyalkyl acrylate. The resulting furan-bearing polyurethanes are reacted with fatty amine-based N-alkyl maleimides. The maleimide and furan functionalities undergo a Diels–Alder reaction, which allows for the covalent bonding of the hydrophobic side chains to the polyurethane backbone. The covalent bonding of the hydrophobic maleimides to the polyurethane backbone is proven by means of NMR. The influence of the functionalization on the surface properties of the resulting polyurethane films is analyzed via the determination of surface energy via the sessile drop method.

Poly(vinylidene fluoride) Containing Phosphonic Acid as Anticorrosion Coating for Steel

Vinylidene fluoride (VDF)-based copolymers bearing pendant phosphonic acid function for potential application as anticorrosion coatings were synthesized via free radical copolymerization of VDF with a new phosphorus containing 2-trifluoromethacrylate monomer, (dimethoxyphosphoryl)methyl 2-(trifluoromethyl)acrylate (MAF-DMP). MAF-DMP was prepared from 2-trifluoromethacrylic acid in 60% overall yield. Radical copolymerizations of VDF with MAF-DMP initiated by tert-amyl peroxy-2-ethylhexanoate at varying ([VDF]₀/[MAF-DMP]₀) feed ratios led to several poly(VDF-co-MAF-DMP) copolymers having different molar percentages of VDF (79-96%) and number-average molecular weights (M_n's) up to ca. 10 000 g mol^-1 in fair yields (47-53%). Determination of the composition and microstructure of all the synthesized copolymers was done by ¹H and ¹⁹F NMR spectroscopies. The monomer reactivity ratios of this new VDF/MAF-DMP pair were also determined (r_VDF = 0.76 ± 0.34 and r_MAF-DMP = 0 at 74 °C). The resulting poly(VDF-co-MAF-DMP) copolymers exhibited high melting temperature (162-171 °C, with respect to the VDF content), and the degree of crystallinity reached up to 51%. Finally, the pendant dimethyl phosphonate ester groups of the synthesized poly(VDF-co-MAF-DMP) copolymer were quantitatively hydrolyzed, giving rise to novel phosphonic acid-functionalized PVDF (PVDF-PA). In comparison to hydrophobic poly(VDF-co-MAF-DMP) copolymers (the water contact angle, WCA, was 98°), the hydrophilic character of the PVDF-PA was found to be surprisingly rather pronounced, exhibiting low WCA (15°). Finally, steel plates coated with PVDF-PA displayed satisfactory anticorrosion properties under simulated seawater environment.

Poly(fluoroacrylate)s with tunable surface hydrophobicity via radical copolymerization of 2,2,2-trifluoroethyl α-fluoroacrylate and 2-(trifluoromethyl)acrylic acid

Fluorinated polyacrylates with tunable surface hydrophobicity are prepared via radical copolymerization of an α-fluoroacrylate and 2-(trifluoromethyl)acrylic acid.

Polyurethane types, synthesis and applications – a review

Polyurethanes (PUs) are a class of versatile materials with great potential for use in different applications, especially based on their structure–property relationships.

Preparation of crosslinked porous polyurea microspheres in one-step precipitation polymerization and its application for water treatment

Porous polyurea microspheres (PPUMs) were simply prepared in one-step by the precipitation polymerization of isophorone diisocyanate with triethylenetetramine and SiO₂ particles.