Macromolecular Systems with MSA-Capped CdTe and CdTe/ZnS Core/Shell Quantum Dots as Superselective and Ultrasensitive Optical Sensors for Picric Acid Explosive

Metal-organic frame material encapsulated Rhodamine 6G: A highly sensitive fluorescence sensing platform for the detection of picric acid contaminants in water

As a water pollutant with excellent solubility, 2,4,6-trinitrophenol (also known as picric acid, PA) poses a potential threat to the natural environment and human health, so it is crucial important to detect PA in water. In this study, a novel composite material (MIL-53(Al)@R6G) was successfully synthesized by encapsulating Rhodamine 6G into a metal-organic frame material, which was used for fluorescence detection of picric acid (PA) in water. The composite exhibits bright yellow fluorescence emission with a fluorescence quantum yield of 58.23 %. In the process of PA detection, the composite has excellent selectivity and anti-interference performance, and PA can significantly quench the fluorescence intensity of MIL-53(Al)@R6G. MIL-53(Al)@R6G has the advantages of fast detection time (20 s), wide linear range (1-100 µM) and low detection limit (4.8 nM). In addition, MIL-53(Al)@R6G has demonstrated its potential for the detection of PA in environmental water samples with satisfactory results.

A Chromo-fluorogenic Probe for Selective Detection of Picric Acid Alongside Its Recovery by Aliphatic Amines and Construction of Molecular Logic Gates

Nitroaromatic compounds are illicit explosive chemicals. For environmental security and homeland safety, selective and sensitive identification of these secondary-class explosives has been a reason for the exhaustive research arena of chemists for about a decade. We introduced a sensitive optical sensor with desalted neutral red (NR) dye. After ingressing picric acid (PA) in acetonitrile, the probe becomes non-fluorescent, displaying a colorimetric change from yellow to pink. The quenched phenomena and the changed color were re-established with aliphatic amine, trimethylamine (TEA). The reversibility is produced cyclically, both in fluorimetrically and spectrophotometrically. The detection limit for PA with our probe comes out as 0.639 µM; this value is significantly lower than many chemosensors available in the literature. Also, NR-stained filter paper strips-based test kit analysis has been deployed as a displayable photonic device for in-situ detection of PA. Furthermore, the whole system was conceptualized to produce single input, single output, and double input single output logic gates, which can be applied to digital devices. The chronological input manner as NTP (NR- TEA-PA) pushed us to configure a molecular keypad lock system, the basis of digital locking devices. The repeatable & reversible detection system exhibits "Write read- Erase-read Write-read' type memory devices.

An optical sensing platform for the detection of anti-cancer drugs and their cytotoxicity screening using a highly selective phosphorene-based composite

Monitoring therapeutic drugs and their elimination is crucial because they may cause severe side effects on the human body. Methotrexate (MTX) is a widely used anti-cancer drug, which is highly expensive, and the detection of unwanted overdoses of MTX using traditional procedures is time-consuming and involves complex instrumentation. In this work, we have developed a nanocomposite material using phosphorene, cystine, and gold (Ph-Cys-Au) that shows excellent optical properties. This nanocomposite can be used as an optical sensing platform for the detection of MTX in the range 0-260 μM. The synthesized sensing platform is very sensitive, selective, and cost-effective for the detection of MTX. Ph-Cys-Au can effectively detect MTX in aqueous media with a limit of detection (LOD) of about 0.0266 nM (for a linear range of 0-140 μM) and 0.0077 nM (for a linear range of 160-260 μM). The nanocomposite is equally selective for real samples, such as human blood serum (HBS) and artificial urine (AU) with a LOD of 0.0914 nM and 0.0734 nM, respectively. We have also determined the limit of quantification (LOQ); the LOQ values for the aqueous media were 0.0807 nM (for a linear range of 0-140 μM) and 0.0234 nM (for a linear range of 160-260 μM), whereas, the values for HBS and AU were around 0.2771 nM and 0.2226 nM, respectively. Moreover, the nanocomposite also provides a feasible platform for cytotoxicity screening in cancerous cells (Caco-2 cell lines) and non-cancerous cells (L-929 cell lines).

"Click" Reaction-Mediated Silk Fibroin-Functionalized Thiol-Branched Graphene Oxide Quantum Dots for Smart Sensing of Tetracycline

The abuse of tetracycline (TC) antibiotics causes the accumulation of their residue in the environment, which has an irreversible impact on food safety and human health. In light of this, it is vital to offer a portable, quick, efficient, and selective sensing platform to detect TC instantly. Herein, we have successfully developed a sensor using silk fibroin-decorated thiol-branched graphene oxide quantum dots through a well-known thiol-ene click reaction. It is applied to ratiometric fluorescence sensing of TC in real samples in the linear range of 0-90 nM, with the detection limit of 49.69, 47.76, 55.25, 47.90, and 45.78 nM for deionized water, chicken sample, fish sample, human blood serum, and honey sample, respectively. With the gradual addition of TC to the liquid media, the sensor develops a synergetic luminous effect in which the fluorescence intensity of the nanoprobe steadily declines at 413 nm, while the intensity of a newly emerging peak increases at 528 nm, maintaining a ratio that is dependent on the analyte concentration. The increase of luminescence properties in the liquid media is clearly visible by naked eyes in the presence of 365 nm UV light. The result helps us in building a filter paper strip-based portable smart sensor using an electric circuit comprising a 365 nm LED (light-emitting diode) powered by a mobile phone battery which is attached just below the rear camera of a smartphone. The camera of the smartphone captures the color changes that occur throughout the sensing process and translates into readable RGB data. The dependency of color intensity with respect to the concentration of TC was evaluated by deducing a calibration curve from where the limit of detection was calculated and found to be 0.125 μM. These kinds of gadgets are important for the possible real-time, on-the-spot, quick detection of analytes in situations where high-end approaches are not easily accessible.

Enhanced fluorescence quenching for p-nitrophenol in imidazolium ionic liquids using a europium-based fluorescent probe

p-Nitrophenol (PNP) is a toxic contaminant in water, the detection of which has attracted considerable attention. Since ionic liquids (ILs) have been widely used as popular solvents in both extraction and catalysts for PNP, the remediation of PNP is not limited to water and traditional organic solvents. Thus, it is significant to develop approaches for the detection of PNP in ILs. Accordingly, the present work is focused on the detection of PNP in a series of imidazolium-based ILs, 1-hexyl-3-methyl-imidazolium bromide ([Hmim]Br), 1-butyl-3-methyl-imidazolium tetrafluoroborate ([Bmim]BF4), 1-butyl-3-methyl-imidazolium trifluoromesulfonate ([Bmim]TfO), 1-butyl-3-methyl-imidazolium trifluoroacetate ([Bmim]TA), and 1-butyl-3-methyl-imidazolium nitrate ([Bmim]NO3), using a europium-based fluorescent probe, Na3[Eu(DPA)3] (DPA = 2, 6-pyridinedicarboxylic acid). This fluorescent probe showed excellent selectivity and sensitivity toward [Bmim]NO3 in aqueous solution. Further studies showed that not only the fluorescence performance of the europium complex was enhanced in the other four ILs compared with that in water, but also the detecting capability for PNP was improved. The order of the quenching efficiency in different solvents was: [Bmim]BF4 > [Bmim]TfO > [Hmim]Br > [Bmim]TA > water. The higher sensitivity for PNP in ILs was proven to be related to the efficient energy transfer of the europium complex and lower solvent polarity of the ILs. The quenching mechanism for the detection of PNP was established as being due to the ground state electrostatic interactions between the fluorescent probe and analyte, photoinduced electron transfer (PET) and inner filter effect (IFE).

Riboflavin based conjugated biomolecule for ultrasensitive detection of nitrophenols

Real time detection of explosive compounds in today's time is of utmost necessity due to security and severe environmental safety issues. Herein, we have synthesized a biobased conjugated molecular system from riboflavin and l-cystine utilized it for detecting picric acid in trace amount using optical sensing technique. The bioconjugate probe showed high quenching efficiency towards picric acid, which is 92.2%. In depth mechanistic study showed that ground state electrostatic interaction and inner filter effect are the factors leading to the diminishing of the probe's fluorescence intensity on addition of trace amount of the nitrophenol, picric acid. The detection limit of the conjugate is 0.37 nM which is extremely low and highly desirable for clinical applications of this system.

Enhanced fluorescent sensing probe via PbS quantum dots functionalized with gelatin for sensitive determination of toxic bentazon in water samples

Fluorescent chemical sensors to detect materials, by increasing fluorescence emission and absorption or by shutting down, because they are nondestructive, the ability to show decomposed concentrations, fast response, high accuracy have been considered and used. In this research, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for the determination of toxic bentazon (BTZN) one of the most problematic pesticides polluting in water samples, and extremely harmful to humans and animals even at low concentrations. The calibration curve was linear in the range of (0.05 to 200.0 ng mL^-1). The current response was linearly proportional to the BTZN concentration with a R²∼ 0.999. The standard deviation of less than (3%), and detection limits (3S/m) of the method (0.5 ng mL^-1, in time 50 s, 325 nm) were obtained for sensor level response PbS Quantum Dot-Gelatin nanocomposites sensor with (99%) which is below the U.S. Health Advisory level. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the BTZN. The method fluorometric introduced to measure BTZN in water samples was used and can be used for in different intricate matrices, the chemical PbS Quantum Dot-Gelatin nanocomposites sensor made it possible as an excellent sensor with good reproducibility.

Activity of CdTe Quantum-Dot-Tagged Superoxide Dismutase and Its Analysis in Capillary Electrophoresis

Quantum dots (QDs) have a broad range of applications in cell biolabeling, cancer treatment, metastasis imaging, and therapeutic drug monitoring. Despite their wide use, relatively little is known about their influence on other molecules. Interactions between QDs and proteins can influence the properties of both nanoparticles and proteins. The effect of mercaptosuccinic acid-capped CdTe QDs on intercellular copper–zinc superoxide dismutase (SOD1)—one of the main enzymatic antioxidants—was investigated. Incubation of SOD1 with QDs caused an increase in SOD1 activity, unlike in the case of CdCl₂, which inhibited SOD1. Moreover, this effect on SOD1 increased with the size and potential of QDs, although the effect became clearly visible in higher concentrations of QDs. The intensity of QD-SOD1 fluorescence, analyzed with the use of capillary electrophoresis with laser-induced fluorescence detection, was dependent on SOD1 concentration. In the case of green QDs, the fluorescence signal decreased with increasing SOD1 concentration. In contrast, the signal strength for Y-QD complexes was not dependent on SOD1 dilutions. The migration time of QDs and their complexes with SOD1 varied depending on the type of QD used. The migration time of G-QD complexes with SOD1 differed slightly. However, in the case of Y-QD complexes with SOD1, the differences in the migration time were not dependent on SOD concentration. This research shows that QDs interact with SOD1 and the influence of QDs on SOD activity is size-dependent. With this knowledge, one might be able to control the activation/inhibition of specific enzymes, such as SOD1.

A New Compound for Sequential Sensing of Picric Acid and Aliphatic Amines: Physicochemical Details and Construction of Molecular Logic Gates

Picric acid (PA) at low concentration is a serious water pollutant. Alongside, aliphatic amines (AAs) add to the queue to pollute surface water. Plenty of reports are available to sense PA with an ultralow limit of detection (LOD). However, only a handful of works are testified to detect AAs. A new fluorescent donor-acceptor compound has been synthesized with inherent intramolecular charge transfer (ICT) character that enables selective and sensitive colorimetric quantitative detection of PA and AAs with low LODs in non-aqueous as well as aqueous solutions. The synthesized compound is based on a hemicyanine skeleton containing two pyridenylmethylamino groups at the donor and a benzothiazole moiety at the acceptor ends. The detailed mechanisms and reaction dynamics are explained spectroscopically along with computational support. The fluorescence property of the detecting compound changes due to protonation of its pyridinyl centers by PA leading to quenching of fluorescence and subsequently de-protonation by AAs to revive the signal. We have further designed logic circuits from the acquired optical responses by sequential interactions.

Template-directed synthesis of Sm2Ti2O7 nanoparticles: a FRET-based fluorescent chemosensor for the fast and selective determination of picric acid

Fluorescence “turn off” detection of picric acid using a Sm₂Ti₂O₇ nanoprobe.

Aggregation-induced phosphorescence quenching method for the detection of picric acid based on melamine-passivated Mn-doped ZnS quantum dots

Melamine (MA)-passivated Mn-doped ZnS quantum dots (QDs) were synthesized by a hydrothermal method. The MA-passivated QDs can form a charge-transfer complex with picric acid (PA) at 80 °C, thereby quenching the phosphorescence of the QDs. A sensitive method for detecting PA was established based on this principle of phosphorescence quenching. When the PA concentration ranged from 2.0 to 180 ng mL^-1, the concentration was linearly related to the quenching intensity of the QDs, with a detection limit of 1.4 ng mL^-1. When applied to detect PA in environmental water samples, the proposed method showed superior analytical performance compared with other PA analysis methods. Furthermore, we verified the static quenching mechanism by density functional theory. MA on the surface of QDs and PA formed a stable structure with a binding energy of 12.43 eV.

The BODIPY-Based Chemosensor for Fluorometric/Colorimetric Dual Channel Detection of RDX and PA

A fluorometric/colorimetric dual-channel chemosensor based on a hydrazine-substituted BODIPY probe has been successfully fabricated for the detection of RDX and PA. The chemosensor displays turn-on fluorescence behavior upon RDX with a detection limit of 85.8 nM, while showing a turn-off response to PA with a detection limit of 0.44 μM. Meanwhile, an obvious color difference is observed by the naked-eye after the reaction for RDX. Thus, in application, a two-to-two logic gate is constructed for potential application in explosives detection. Additionally, portable equipment is also developed for in situ determination of RDX.

CdS QDs/N-methylpolypyrrole hybrids as fluorescent probe for ultrasensitive and selective detection of picric acid

Inorganic-organic hybrids are an advanced class of luminescent materials showing great promise for fabrication of highly sensitive and selective optical sensors. In the present study, a novel CdS quantum dots/N-methylpolypyrrole (CdS QDs/NMPPY) hybrid was synthesized via the direct polymerization of NMPPY on L-cysteine capped CdS QD aggregates. A number of characterization techniques including FTIR, DLS, FESEM, UV-vis, and fluorescence spectroscopies were used to study the chemical composition, morphology and optical properties of the resultant QDs/polymer hybrid. The as-synthesized CdS QDs/NMPPY hybrid shows a bright emission at 459 nm under excitation at 367 nm in water. Also the results show the role of sodium dodecyl benzenesulfonate (SDBS) to control the mechanism of synthesis and spectroscopic of the prepared CdS/NMPPY hybrid. Moreover, in this work was reported the direct hybridization procedure without other modification such as ligand exchange and coating. We demonstrated that the hybridization of CdS QDs with NMPPY polymer leads to a significant change in fluorescence sensing properties toward nitroaromatic compounds. Further studies unveiled that the emission of CdS QDs/NMPPY hybrid is strongly and selectively quenched by picric acid molecule with a large Stern-Volmer constant of 843,900 M^-1 and an excellent detection limit of 4.6 × 10^-7 M. The changes in the UV-vis spectra of picric acid solutions in the presence and absence of CdS QDs/NMPPY hybrid displayed that the fluorescence quenching occurs through a static quenching mechanism. Finally, the proposed CdS QDs/NMPPY sensor was successfully utilized to determine the amount of picric acid in real water samples.

Multiple Emitting Amphiphilic Conjugated Polythiophenes-Coated CdTe QDs for Picogram Detection of Trinitrophenol Explosive and Application Using Chitosan Film and Paper-Based Sensor Coupled with Smartphone

Novel multiple emitting amphiphilic conjugated polythiophene-coated CdTe quantum dots for picogram level determination of the 2,4,6-trinitrophenol (TNP) explosive are developed. Four biocompatible sensors, cationic polythiophene nanohybrids (CPTQDs), nonionic polythiophene nanohybrids (NPTQDs), anionic polythiophene nanohybrids (APTQDs), and thiophene copolymer nanohybrids (TCPQDs), are designed using an in situ polymerization method, which shows highly enhanced fluorescence intensity and quantum yield (up to 78%). All sensors are investigated for nitroexplosive detection to provide a remarkable fluorescence quenching for TNP and the quenching efficiency reached 96% in the case of TCPQDs. The fluorescence of the sensors are quenched by TNP through inner filter effect, electrostatic, π-π, and hydrogen bonding interactions. Under optimal conditions, the detection limits of CPTQDs, NPTQDs, APTQDs, and TCPQDs are 2.56, 7.23, 4.12, and 0.56 × 10-9 m, respectively, within 60 s. More importantly, portable, cost effective, and simple to use paper strips and chitosan film are successfully applied to visually detect as little as 2.29 pg of TNP. The possibility of utilizing a smartphone with a color-scanning APP in the determination of TNP is also established. Moreover, the practical application of the developed sensors for TNP detection in tap and river water samples is described with satisfactory recoveries of 98.02-107.50%.

Real-Time Visualization of Cell Membrane Damage Using Gadolinium-Schiff Base Complex-Doped Quantum Dots

Despite the importance of cell membranes for maintenance of integrity of cellular structures, there is still a lack of methods that allow simple real-time visualization of their damage. Herein, we describe gadolinium-Schiff base-doped quantum dots (GdQDs)-based probes for a fast facile spatial labeling of membrane injuries. We found that GdQDs preferentially interact through electron-rich and hydrophobic residues with a specific sequence motif of NHE-RF2 scaffold protein, exposed upon membrane damage. Such interaction results in a fast formation of intensively fluorescent droplets with a higher resolution and in a much shorter time compared to immunofluorescence using organic dye. GdQDs have high stability, brightness, and considerable cytocompatibility, which enable their use in long-term experiments in living cultures. To the best of our knowledge, this is the first report, demonstrating a method allowing real-time monitoring of membrane damage and recovery without any special requirements for instrumentation. Because of intensive brightness and simple signal pattern, GdQDs allow easy examination of interactions between cellular membranes and cell-penetrating peptides or cytostatic drugs. We anticipate that the simple and flexible method will also facilitate the studies dealing with host-pathogen interactions.

A ZnS nanocrystal/reduced graphene oxide composite anode with enhanced electrochemical performances for lithium-ion batteries

A simple route for the preparation of ZnS nanocrystal/reduced graphene oxide (ZnS/RGO) by a hydrothermal synthesis process was achieved. The chemical composition, morphology, and structural characterization reveal that the ZnS/RGO composite is composed of sphalerite-phased ZnS nanocrystals uniformly dispersed on functional RGO sheets with a high specific surface area. The ZnS/RGO composite was utilized as an anode in the construction of a high-performance lithium-ion battery. The ZnS/RGO composite with appropriate RGO content exhibits a high reversible specific capacity (780 mA h g^-1), excellent cycle stability over 100 cycles (71.3% retention), and good rate performance at 2C (51.2% of its capacity when measured at a 0.1C rate). To further investigate this ZnS/RGO anode for practical use in full Li-ion cells, we tested the electrochemical performance of the ZnS/RGO anode at different cut-off voltages for the first time. The presence of RGO plays an important role in providing high conductivity as well as a substrate with a high surface area. This helps alleviate the typically problems associated with volume expansion and shrinkage during prolonged cycling. Additionally, the RGO provides multiple nucleation points that result in a uniformly dispersed film of nanosized ZnS that covers its surface. Thus, the high surface area RGO enables high electronic conductivity and fast charge transfer kinetics for ZnS lithiation/delithiation.

Multichannel Discriminative Detection of Explosive Vapors with an Array of Nanofibrous Membranes Loaded with Quantum Dots

The multichannel fluorescent sensor array based on nanofibrous membranes loaded with ZnS quantum dots (QDs) was created and demonstrated for the discriminative detection of explosives. The synergistic effect of the high surface-to-volume ratio of QDs, the good permeability of nanofibrous membranes and the differential response introduced by surface ligands was played by constructing the sensing array using nanofibrous membranes loaded with ZnS QDs featuring several surface ligands. Interestingly, although the fluorescence quenching of the nanofibrous membranes is not linearly related to the exposure time, the fingerprint of each explosive at different times is very similar in shape, and the fingerprints of the three explosives show different shapes. Three saturated vapors of nitroaromatic explosives could be reliably detected and discriminated by the array at room temperature. This work is the first step toward devising a monitoring system for explosives in the field of public security and defense. It could, for example, be coupled with the technology of image recognition and large data analysis for a rapid diagnostic test of explosives. This work further highlights the power of differential, multichannel arrays for the rapid and discriminative detection of a wide range of chemicals.

Pyridine-ring containing twisttetraazaacene: Synthesis, physical properties, crystal structure and picric acid sensing

Novel pyridine-ring containing twisttetraazaacene 9,14-diphenylpyreno[4,5-g]isoquinoline (1) and its full-carbon derivative 9,14-diphenyldibenzo[de,qr]tetracene (2) have been synthesized and fully characterized. Studies showed that compound 1 could identify picric acid (PA) over other common nitro compounds with high selectivity and sensitivity. Upon the addition of PA, the emission peak of compound 1 in CH₃CN was red shifted from 447 to 555nm with a fluorescence quenching efficiency as high as 95%, the detection limit was calculated to be 2.42μM, while its full-carbon derivative (2) could not exhibit this kind of performance. The possible mechanism with the enhanced PA detection efficiency in pyridine-ring containing twisttetraazaacene (1) than its full-carbon derivative (2) was also investigated.

Inner filter effect-based fluorescent sensing systems: A review

Inner filter effect (IFE) was previously considered as an error in fluorescence measurement. In recent years, it has been developed as an important non-irradiation energy conversion model of spectroscopic technique and found wide applications in the fields of chemical sensing and biosensing. In comparison with traditional techniques based on forster resonance energy transfer (FRET), the IFE-based fluorescent approach is more flexible and straightforward without the link of absorber with fluorescer. The present review for the first time introduces the state of the art in the progress of the IFE-based fluorescent sensing systems, including sensing strategy, essential conditions, materials option, and their applications for the detection of various target analytes, e.g., ionic species, small molecules, and macromolecules. In addition, the benefits and limitations of the IFE-based fluorescent sensing systems are also critically discussed and highlighted.

Strong Blue Emissive Supramolecular Self-Assembly System Based on Naphthalimide Derivatives and Its Ability of Detection and Removal of 2,4,6-Trinitrophenol

Two simple and novel gelators (G-P with pyridine and G-B with benzene) with different C-4 substitution groups on naphthalimide derivatives have been designed and characterized. Two gelators could form organogels in some solvents or mixed solvents. The self-assembly processes of G-P in a mixed solvent of acetonitrile/H₂O (1/1, v/v) and G-B in acetonitrile were studied by means of electron microscopy and spectroscopy. The organogel of G-P in the mixed solvent of acetonitrile/H₂O (1/1, v/v) formed an intertwined fiber network, and its emission spectrum had an obvious blue shift compared with that of solution. By contrast, the organogel of G-B in acetonitrile formed a straight fiber, and its emission had an obvious red shift compared with that of solution. G-P and G-B were employed in detecting nitroaromatic compounds because of their electron-rich property. G-P is more sensitive and selective toward 2,4,6-trinitrophenol (TNP) compared with G-B. The sensing mechanisms were investigated by ¹H NMR spectroscopic experiments and theoretical calculations. From these experimental results, it is proposed that electron transfer occurs from the electron-rich G-P molecule to the electron-deficient TNP because of the possibility of complex formation between G-P and TNP. The G-P molecule could detect TNP in water, organic solvent media, as well as using test strips. It is worth mentioning that the organogel G-P can not only detect TNP but also remove TNP from the solution into the organogel system.

Hand-Held Femtogram Detection of Hazardous Picric Acid with Hydrophobic Ag Nanopillar SERS Substrates and Mechanism of Elasto-Capillarity

Picric acid (PA) is a severe environmental and security risk due to its unstable, toxic, and explosive properties. It is also challenging to detect in trace amounts and in situ because of its highly acidic and anionic character. Here, we assess sensing of PA under nonlaboratory conditions using surface-enhanced Raman scattering (SERS) silver nanopillar substrates and hand-held Raman spectroscopy equipment. The advancing elasto-capillarity effects are explained by molecular dynamics simulations. We obtain a SERS PA detection limit on the order of 20 ppt, corresponding attomole amounts, which together with the simple analysis methodology demonstrates that the presented approach is highly competitive for ultrasensitive analysis in the field.

Anion-Exchange Induced Strong π-π Interactions in Single Crystalline Naphthalene Diimide for Nitroexplosive Sensing: An Electronic Prototype for Visual on-Site Detection

A new derivative of naphthalene diimide (NDMI) was synthesized that displayed optical, electrical, and visual changes exclusively for the most widespread nitroexplosive and highly water-soluble toxicant picric acid (PA) due to strong π-π interactions, dipole-charge interaction, and a favorable ground state electron transfer process facilitated by Coulombic attraction. The sensing mechanism and interaction between NDMI with PA is demonstrated via X-ray diffraction analysis, (1)H NMR studies, cyclic voltammetry, UV-visible/fluorescence spectroscopy, and lifetime measurements. Single crystal X-ray structure of NDMI revealed the formation of self-assembled crystalline network assisted by noncovalent C-H···I interactions that get disrupted upon introducing PA as a result of anion exchange and strong π-π stacking between NDMI and PA. Morphological studies of NDMI displayed large numbers of single crystalline microrods along with some three-dimensional (3D) daisy-like structures which were fabricated on Al-coated glass substrate to construct a low-cost two terminal sensor device for realizing vapor mode detection of PA at room temperature and under ambient conditions. Furthermore, an economical and portable electronic prototype was developed for visual and on-site detection of PA vapors under exceptionally realistic conditions.

Detection of nitroaromatic explosives using π-electron rich luminescent polymeric nanocomposites

Novel electron rich luminescent nanocomposite polymers for sensing nitroaromatic explosives by PET and FRET phenomenon.