Fabrication of Surface Protein-Imprinted Nanoparticles Using a Metal Chelating Monomer via Aqueous Precipitation Polymerization

A novel fluorescent sensor for selective rifampicin detection based on the bio-inspired molecularly imprinted polymer-AgInS2/ZnS quantum dots

A fluorescent sensing material based on the ternary core-shell quantum dots with outstanding optical properties and a bio-inspired molecularly imprinted polymer (MIP) as a recognition element has been prepared for selective detection of rifampicin (RFP). Firstly, AgInS2/ZnS core/shell quantum dots (ZAIS QDs) were prepared by a hydrothermal process. Then, the fluorescent sensor was prepared by coating these QDs by a dopamine-based MIP layer. The fluorescence of MIP@ZAIS QDs was quenched by RFP probably due to the photoinduced electron transfer process. The quenching constant was much higher for MIP@ZAIS QDs than the non-imprinted polymer@QDs, indicating that MIP@ZAIS QDs could selectively recognize RFP. Under the optimized conditions, the sensor had a good linear relationship at the RFP concentration range of 5.0 to 300 nM and the limit of detection was 1.25 nM. The respond time of the MIP@ZAIS QDs was 5 min, and the imprinting factor was 6.3. It also showed good recoveries ranging from 98 to 101%, for analysis of human plasma samples. The method is simple and effective for the detection of RFP and offers a practical application for the rapid analysis of human plasma samples.

Controlled synthesis of open-mouthed epitope-imprinted polymer nanocapsules with a PEGylated nanocore and their application for fluorescence detection of target protein

Epitope imprinting is an effective way to create artificial receptors for protein recognition. Surface imprinting with immobilized templates and sacrificial supports can generate high-quality imprinted cavities of homogeneous orientation and good accessibility, but it is still challenging to fabricate nanoscale imprinted materials by this approach. Herein, we propose a method for the controlled synthesis of open-mouthed epitope-imprinted polymer nanocapsules (OM-MIP NCs) by limiting the imprinting polymerization on the template-bearing side of the Janus nanoparticles (JNPs). Concurrent bromoacetyl (Ac–Br) and 2-bromoisobutyryl (iB–Br) functionalization of the major portion of SiO₂ nanoparticles is achieved via the molten-wax-in-water Pickering emulsion approach. The cysteinyl-derived epitope templates are immobilized through the Ac–Br groups, and then surface imprinting is fulfilled via ATRP initiated by the iB–Br groups. The SiO₂ supports are partially etched and then PEGlated, affording OM-MIP NCs with a PEGylated nanocore. The inside nanocore can facilitate collection of the NCs by centrifugation, and its PEGylation can inhibit non-specific binding. The surface imprinting can be optimized through the ATRP time, and the etching can be tailored via the concentration of NH₄HF₂ employed. For proof-of-concept, with a C-terminus nonapeptide of bovine serum albumin (BSA) chosen as a model epitope and polymerizable carbon dots added to the pre-polymerization solution, fluorescent OM-MIP NCs were fabricated for BSA sensing. The as-synthesized NCs exhibited satisfactory detection performance, with an imprinting factor of 6.1, a limit of detection of 38.1 nM, a linear range of 0.25–6 μM, and recoveries of 98.0 to 104.0% in bovine serum samples.

Surface epitope imprinting over the one side of Janus SiO₂ NPs via ATRP affords open-mouthed epitope-imprinted nanocapsules with imprinted cavities of homogeneous orientation and good accessibility for fluorescence detection of target protein.

Synthesis of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots for enhanced fluorescence detection

Molecularly imprinted polymers endowed with photo-luminescent properties have attracted wide research interest in many fields such as biological analysis and diseases diagnosis. Herein, we illustrate a versatile method for the construction of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots (CDs) for enhanced fluorescence detection of the target protein. As the fluorescent nanosupports for surface imprinting, CDs-attached SiO₂ nanoparticles were synthesized via thiol-ene click chemistry. With histidine (His)-exposed protein as templates, imprinted nanoshells were formed over the nanosupports via copolymerization of a Cu²⁺-chelating monomer and an oligo (ethylene glycol) monomer, hence producing high-quality imprinted cavities because of both the relatively strong coordination and inhibited non-specific binding. Using lysozyme as a model His-exposed template, the imprinted nanoparticles showed fluorescence enhancement while binding the target protein, and exhibited significantly increased specific fluorescence response than the controls without the metal coordination. They achieved a high imprinting factor of 5.8 and a low limit of detection of 10.1 nM. Furthermore, such sensors were applied to determine lysozyme in diluted chicken egg-white samples with satisfactory recoveries at three spiking levels ranging from 97.9 to 101.4%. Human serum albumin was also used as another template protein for preliminary confirming the generality of the presented strategy.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Oriented Immobilization of Protein Templates: A New Trend in Surface Imprinting

In this Review, we have summarized recent trends in protein template imprinting. We emphasized a new trend in surface imprinting, namely, oriented protein immobilization. Site-directed proteins were assembled through specially selected functionalities. These efforts resulted in a preferably oriented homogeneous protein construct with decreased protein conformation changes during imprinting. Moreover, the maximum functionality for protein recognition was utilized. Various strategies were exploited for oriented protein immobilization, including covalent immobilization through a boronic acid group, metal coordinating center, and aptamer-based immobilization. Moreover, we have discussed the involvement of semicovalent as well as covalent imprinting. Interestingly, these approaches provided additional recognition sites in the molecular cavities imprinted. Therefore, these molecular cavities were highly selective, and the binding kinetics was improved.

Effect of surface functionality of molecularly imprinted composite nanospheres on specific recognition of proteins

The surface functionality of biomaterial plays a primary role in determining its application in biorecognition and drug delivery. In our work, three types of synthetic tailoring polymer nanospheres with hierarchical architecture were constructed to obtain functional polymer layer with disparate chemical motifs for protein adsorption via surface imprinting and grafting copolymerization. In this polymerization system, the structure stability of template protein bovine serum albumin (BSA) is well maintained within a certain range, which facilitated the accurate imprinting and precise identification. A comprehensive protocol for screening different functional layer is proposed through comparing the adsorption behavior, selectivity, identification and responsiveness to medium pH of three functional layers. Our study demonstrates that surface functionality greatly influences the adsorption capacity and selectivity of adsorption material. The functional layer with ionic liquid structure that could only provide multiple non-covalent binding sites is beneficial to the proteins aggregation and extraction, while the anti-nonspecific binding functional layer of biomaterial with zwitterionic structure for specific protein capture is promising to serve as a preferable antigen-antibody communication network, which shows great potential for protein recognition and separation. In summary, our proposed strategy provides a systematic selection criterion of biomaterials for effective application in biosensors.

Silanized carbon dot-based thermo-sensitive molecularly imprinted fluorescent sensor for bovine hemoglobin detection

Using the surface molecular imprinting technique, a thermo-sensitive molecularly imprinted fluorescent sensor was constructed for bovine hemoglobin (BHb) detection with the silanized carbon dots (CD@SiO₂) as fluorescent signal, N-isopropylacrylamide as monomer sensitive to temperature, and BHb as template. The silanized carbon dots coated by the molecularly imprinted polymer (CD@SiO₂@MIP) were characterized by high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. Owing to the combination of the strong fluorescence sensitivity of CDs and the high selectivity of the molecular imprinting shell, the prepared sensor showed good recognition and detection performance to the target protein BHb, with a linear range of 0.31-1.55 μM and a detection limit of 1.55 μM. Furthermore, the sensor was utilized to detect the content of BHb in real urine with a recovery of 98.6-100.5%. The CD@SiO₂@MIP sensors present a high potential for applications in the detection of BHb in biological systems. Graphical abstract.

Epitope-imprinted mesoporous silica nanoparticles for specific recognition of tyrosine phosphorylation

Tyrosine phosphorylation regulates the upstream signaling pathway but accounts for less than 0.1% of total phosphorylation in human cells. Herein, molecularly imprinted mesoporous materials were first synthesized to recognize the phosphorylated tyrosine residue from other phosphorylated residues.

Ni2+-BSA Directional Coordination-Assisted Magnetic Molecularly Imprinted Microspheres with Enhanced Specific Rebinding to Target Proteins

Protein imprinting technology is of interest in drug delivery, biosensing, solid-phase extraction, and so forth. However, the efficient recognition and separation of proteins have remained challenging to date. Toward this, under the assistance of Ni²⁺-bovine serum albumin (BSA) directional coordination strategy, magnetic BSA-imprinted materials had been synthesized via dopamine self-polymerization on hollow Fe₃O₄@mSiO₂ microspheres (mSiO₂ referred as mesoporous silica). The well-defined imprinted microspheres possessed more satisfactory adsorption capacity (266.99 mg/g), enhanced imprinting factor (5.45), and fast adsorption saturation kinetics (40 min) for BSA, superior to many previous reports. Benefiting from the coordinate interaction between Ni²⁺ and BSA, these fabricated microspheres exhibited excellent specificity not only in individual and competitive protein rebinding samples but also in bovine serum. Combined with the directional coordination method, the magnetic-imprinted composite materials to selectively capture target proteins could provide promising potential in applications.

A visually distinguishable light interfering bioresponsive silica nanoparticle hydrogel sensor fabricated through the molecular imprinting technique

Methods of the early detection of diseases are based on recognition of the smallest change in the levels of a disease-specific biomarker in body fluids.

Microfluidic array surface ion-imprinted monolithic capillary microextraction chip on-line hyphenated with ICP-MS for the high throughput analysis of gadolinium in human body fluids

A novel method by hyphenating chip-based array ion-imprinted monolithic capillary microextraction with ICP-MS was proposed for the online analysis of trace Gd in biological samples.

Molecular Fingerprints of Hemoglobin on a Nanofilm Chip

Hemoglobin is an iron carrying protein in erythrocytes and also an essential element to transfer oxygen from the lungs to the tissues. Abnormalities in hemoglobin concentration are closely correlated with health status and many diseases, including thalassemia, anemia, leukemia, heart disease, and excessive loss of blood. Particularly in resource-constrained settings existing blood analyzers are not readily applicable due to the need for high-level instrumentation and skilled personnel, thereby inexpensive, easy-to-use, and reliable detection methods are needed. Herein, a molecular fingerprints of hemoglobin on a nanofilm chip was obtained for real-time, sensitive, and selective hemoglobin detection using a surface plasmon resonance system. Briefly, through the photopolymerization technique, a template (hemoglobin) was imprinted on a monomeric (acrylamide) nanofilm on-chip using a cross-linker (methylenebisacrylamide) and an initiator-activator pair (ammonium persulfate-tetramethylethylenediamine). The molecularly imprinted nanofilm on-chip was characterized by atomic force microscopy and ellipsometry, followed by benchmarking detection performance of hemoglobin concentrations from 0.0005 mg mL⁻¹ to 1.0 mg mL⁻¹. Theoretical calculations and real-time detection implied that the molecularly imprinted nanofilm on-chip was able to detect as little as 0.00035 mg mL⁻¹ of hemoglobin. In addition, the experimental results of hemoglobin detection on the chip well-fitted with the Langmuir adsorption isotherm model with high correlation coefficient (0.99) and association and dissociation coefficients (39.1 mL mg⁻¹ and 0.03 mg mL⁻¹) suggesting a monolayer binding characteristic. Assessments on selectivity, reusability and storage stability indicated that the presented chip is an alternative approach to current hemoglobin-targeted assays in low-resource regions, as well as antibody-based detection procedures in the field. In the future, this molecularly imprinted nanofilm on-chip can easily be integrated with portable plasmonic detectors, improving its access to these regions, as well as it can be tailored to detect other proteins and biomarkers.

Phosphate-imprinted magnetic nanoparticles using phenylphosphonic acid as a template for excellent recognition of tyrosine phosphopeptides

The tyrosine phosphorylation of proteins and peptides plays a vital role in cell signal transduction pathways, and it is very important to assay them for understanding their action mechanism. Due to the low levels of the tyrosine phosphopeptides (pTyr) in cells, it is a challenge to enrich them with traditional sorbents, therefore, development of specific and selective sorbents is urgent and necessary. In this work, the phosphate-imprinted magnetic nanoparticles (PMNPs) to enrich the pTyr with high efficiency and selectivity have been fabricated using the phenylphosphonic acid as a template for the "epitope" of pTyr. The magnetic nanoparticles have been functionalized with TiO₂ and then the imprinting silica shells have been coated on the surface of the functional core to obtain the PMNPs sorbents. The PMNPs can obviously shorten the enrichment time and improve the adsorption efficiency for pTyr, and the epitope imprinting films provide an excellent selective recognition ability to target. The recognition capability of PMNPs for pTyr is 90.3 μg/mg and the imprinting factor of the sorbents can reach 24.4. The results indicate that the PMNPs can enrich the pTyr from the tryptic digest of β-casein samples with high specificity, and the spiking recoveries of the pTyr range from 85.1% to 93.8% with the RSD from 0.04 to 3.73. With the high adsorption capacity, rapid separation, excellent specificity and recyclability, the PMNPs sorbents show great potential for analysis of the phosphorylation of peptides in biological and medical fields.

Molecular Imprinting Based Hybrid Ratiometric Fluorescence Sensor for the Visual Determination of Bovine Hemoglobin

We describe a simple and effective strategy to construct a molecular imprinting ratiometric fluorescence sensor (MIR sensor) for the visual detection of bovine hemoglobin (BHb) used as a model protein. The sensor was prepared by simply mixing the solution of green and red CdTe quantum dots (QDs), which were embedded in core-shell structured molecularly imprinted polymers and silica nanoparticles, respectively. The resultant hybrid MIR sensor can selectively bind with BHb and thus quench the fluorescence of the green QDs, while the red QDs wrapped with silica are insensitive to BHb with the fluorescence intensity unchanged. As a result, a continuous obvious fluorescence color change from green to red can be observed by naked eyes, with the detection limit of 9.6 nM. Moreover, the MIR sensor was successfully applied to determine BHb in bovine urine samples with satisfactory recoveries at three spiking levels ranging from 95.7 to 101.5%, indicating great potential application for detecting BHb in real samples. This strategy of using different fluorescence emission materials incorporated to construct a ratiometric fluorescence sensor is reasonable and convenient, which can be extended to the preparation of other ratiometric fluorescence systems for targeted analytes.

Bacteria assisted protein imprinting in sol-gel derived films

A hierarchical imprinting strategy was used to create protein imprints in a silicate film with a high binding capacity as well as selectivity toward the imprint protein and little specificity towards other proteins. In the first part of this work, rod-shaped bacteria were used as templates to create imprints in silica films of various thicknesses to open up the silica framework and increase the surface area exposed to solution. In the second part, the protein (e.g., cytochrome c (CYC) or green fluorescent protein (GFP)) was covalently attached to the surface of Bacillus subtilis and this protein-bacteria complex served as the imprint moiety. Atomic force microscopy and scanning electron microscopy were used to image the micron-size rod-shaped bacteria imprints formed on the silica surface. Fluorescence microscopy, which was used to follow the fabrication process with GFP as the representative protein, clearly demonstrated protein imprinting, protein removal and protein rebinding as well as protein specificity. Visible absorption spectroscopy using CYC as the imprint protein demonstrated relatively fast uptake kinetics and also good specificity against other proteins including bovine serum albumin (BSA), horseradish peroxidase (HRP), glucose oxidase (GOD), and lysozyme (LYZ). Collectively this work demonstrates a new surface bio-imprinting approach that generates recognition sites for proteins and provides a viable means to increase the binding capacity of such imprinted thin films.

Novel surface imprinted magnetic mesoporous silica as artificial antibodies for efficient discovery and capture of candidate nNOS–PSD-95 uncouplers for stroke treatment

Magnetic mesoporous silica imprinted materials as artificial antibodies for the discovery and capture of candidate nNOS–PSD-95 uncouplers for stroke treatment.

Two Are Better than One: Halloysite Nanotubes-Supported Surface Imprinted Nanoparticles Using Synergy of Metal Chelating and Low pKa Boronic Acid Monomers for Highly Specific Luteolin Binding under Neutral Condition

Surface-imprinted nanoparticles with double recognition (DM-MIPs) are fabricated onto halloysite nanotubes (HNTs) for highly specific separation of natural flavone luteolin (LTL) under neutral condition. Specifically, a two-step strategy via consecutive surface-initiated atom transfer radical polymerization (SI-ATRP) is employed to introduce inherent recognition of molecular imprinting and reversible covalent affinity of boronic acid ligands and immobilized Zn²⁺ into DM-MIPs. First, Zn²⁺-immobilized poly(vinyl imidazole) (PVLD) shell based on the HNTs via the first SI-ATRP is prepared to capture LTL by metal chelating. Then HNTs-supported surface imprinted nanoparticles are prepared using low pK_a boronic acid monomer 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid (AMC-FPBA) via the second SI-ATRP. Taking advantage of low apparent pK_a of AMC-FPBA and large high-affinity binding site density, DM-MIPs possess a promising binding with cis-diol-containing LTL under neutral condition. In static adsorption, DM-MIPs show large LTL loading amount (83.42 mg g^-1), fast capture kinetics, remarkable selectivity, and excellent recyclability at pH = 7.0. More importantly, by reducing the pH to 4.0, the loaded TLL can be simply released. As a proof of this concept, a commercially available LTL with 85% purity can be easily enriched and further purified, and the product exhibits the similar antibacterial performance with standard substance.

Molecularly Imprinted Biodegradable Nanoparticles

Biodegradable polymer nanoparticles are promising carriers for targeted drug delivery in nanomedicine applications. Molecu- lar imprinting is a potential strategy to target polymer nanoparticles through binding of endogenous ligands that may promote recognition and active transport into specific cells and tissues. However, the lock-and-key mechanism of molecular imprinting requires relatively rigid cross-linked structures, unlike those of many biodegradable polymers. To date, no fully biodegradable molecularly imprinted particles have been reported in the literature. This paper reports the synthesis of a novel molecularly- imprinted nanocarrier, based on poly(lactide-co-glycolide) (PLGA) and acrylic acid, that combines biodegradability and molec- ular recognition properties. A novel three-arm biodegradable cross-linker was synthesized by ring-opening polymerization of glycolide and lactide initiated by glycerol. The resulting macromer was functionalized by introduction of end-functions through reaction with acryloyl chloride. Macromer and acrylic acid were used for the synthesis of narrowly-dispersed nanoparticles by radical polymerization in diluted conditions in the presence of biotin as template molecule. The binding capacity of the imprinted nanoparticles towards biotin and biotinylated bovine serum albumin was twentyfold that of non-imprinted nanoparti- cles. Degradation rates and functional performances were assessed in in vitro tests and cell cultures, demonstrating effective biotin-mediated cell internalization.

Construction of polymer coated core–shell magnetic mesoporous silica nanoparticles with triple responsive drug delivery

Multi-responsive drug delivery systems are playing a very important role in nanomedicine, as they can feature as smart carriers releasing their payload on demand.

Creating BHb-imprinted magnetic nanoparticles with multiple binding sites

A kind of protein imprinted over magnetic Fe₃O₄@Au multifunctional nanoparticles (NPs) with multiple binding sites was synthesized and investigated.

Fabrication of Surface Protein-Imprinted Biofuel Cell for Sensitive Self-Powered Glycoprotein Detection

Glycoproteins are important biomarkers and therapeutic targets in clinical diagnostics. The conventional analytical methods for glycoprotein are usually faced with some challenges, such as the complex pretreatment of samples, poor availability, and limited stability of antibody, making them not suitable for point-of-care and on-site application. Herein, we demonstrate a novel miniaturized biofuel cells (BFCs)-based self-powered nanosensor for the specific and sensitive determination of glycoproteins in complex samples through the combination of boronate-affinity molecularly imprinted polymer (MIP) and the boronate affinity functionalized biliroxidase-carbon nanotube nanocomposites. The above MIP and the nanocomposites act as both signal probe and biocatalyst at the cathode. The as-obtained self-powered MIP-BFC-based biosensor can detect horseradish peroxidase (a type of glycoprotein) with a wide linear range of 1 ng/mL to 10 μg/mL and a very low detection limit of 1 ng/mL. Especially, it shows high tolerance for different interferences (e.g., sugars and other glycoproteins) and can even measure the α-fetoprotein level in serum samples. Moreover, it exhibits significant advantages over the conventional assays in terms of cost efficiency, stability, and speed, especially inexpensive instrument needed. Our novel approach for construction of the sensor paves a simple and economical way to fabricate portable devices for point-of-care and on-site application.

Synthesis of Water-Dispersible Molecularly Imprinted Electroactive Nanoparticles for the Sensitive and Selective Paracetamol Detection

A novel kind of water-dispersible molecularly imprinted electroactive nanoparticles was prepared combining macromolecular self-assembly with molecularly imprinting technique employing paracetamol (PCM) as template molecule. An amphiphilic electroactive copolymer (P(NVC-EHA-AA), PNEA) containing carbazole group was first synthesized through a one-pot free radical copolymerization. The coassembly of the electroactive copolymers with the template molecules (PCM) in aqueous solution generated nanoparticles embedded with PCM, leading to the formation of molecularly imprinted electroactive nanoparticles (MIENPs). A robust MIP film was formed on the surface of electrode by electrodeposition of MIENPs and subsequent electropolymerization of the carbazole units in MIENPs. After the extraction of PCM molecules, a MIP sensor was successfully constructed. It should be noted that electropolymerization of the electroactive units in MIENPs creates cross-conjugated polymer network, which not only locks the recognition sites but also significantly accelerates the electron transfer and thus enhances the response signal of the MIP sensor. These advantages endowed the MIP sensor with good selectivity and high sensitivity for PCM detection. The MIP sensor could recognize PCM from its possible interfering substances with good selectivity. Under the optimal conditions, two linear ranges from 1 μM to 0.1 mM and 0.1 to 10 mM with a detection limit of 0.3 μM were obtained for PCM detection. The MIP sensor also showed good stability and repeatability, which has been successfully used to analyze PCM in tablets and human urine samples with satisfactory results.

Preparation and characterization of biocompatible molecularly imprinted poly(ionic liquid) films on the surface of multi-walled carbon nanotubes

A series of novel biocompatible MIPs were synthesized for BSA recognition by using MWCNTs with different outside diameters as substrates, and allyl-functionalized ionic liquids with different anion species as monomers.

An epitope imprinted polymer with affinity for kininogen fragments prepared by metal coordination interaction for cancer biomarker analysis

A MIP with affinity for kininogen fragments was synthesized by epitope imprinting for biomarker analysis in serum.