Solution-Processable Silicon Phthalocyanines in Electroluminescent and Photovoltaic Devices

Roles of Singlet Fission in the Photosensitization of Silicon Phthalocyanine

The roles of singlet fission in the triplet generation of silicon phthalocyanine (SiPc), a compound analogous to the IRDye700DX photosensitizer used in near-infrared photoimmunotherapy, are investigated by considering the energetical relation between the excitations of this compound. These excitations are obtained through spin-flip long-range corrected time-dependent density functional theory calculations. To initiate singlet fission, chromophores must meet two conditions: (1) near-degenerate low-lying singlet and quintet (triplet-triplet) excitations with a considerable energy gap of the lowest singlet and triplet excited states and (2) moderate π-stacking energy of chromophores, which is higher than but not far from the solvation energy, to facilitate the dissociation and generation of triplet-state chromophores. The present calculations demonstrate that SiPc satisfies both of these conditions after the formation of π-stacking irrespective of the presence of an axial ligand(s), suggesting that singlet fission plays a crucial role in the triplet generation process, although intersystem crossing occurs simultaneously at a very slow rate.

A smart and visible way to switch the aromaticity of silicon(IV) phthalocyanines

Unlike traditional methods of modifying phthalocyanines (Pcs), we herein report a smart and visible way to switch the aromaticity of silicon(IV) phthalocyanines via a reversible nucleophilic addition reaction of the Pc skeleton induced by alkalis and acids, leading to an interesting allochroism phenomenon and the switching of photosensitive activities.

Low-Cost Silicon Phthalocyanine as a Non-Fullerene Acceptor for Flexible Large Area Organic Photovoltaics

We demonstrate large-area (1 cm²) organic photovoltaic (OPVs) devices based on bis(tri-n-butylsilyl oxide) silicon phthalocyanine (3BS)₂-SiPc as a non-fullerene acceptor (NFA) with low synthetic complexity paired with poly(3-hexylthiophene) (P3HT) as a donor polymer. Environment-friendly nonhalogenated solvents were used to process large area OPVs on flexible indium tin oxide (ITO)-coated polyethylene terephthalate (PET) substrates. An alternate sequentially (Alt-Sq) blade-coated active layer with bulk heterojunction-like morphology is obtained when using (3BS)₂-SiPc processing with o-xylene/1,3,5-trimethylbenzene solvents. The sequential (Sq) active layer is prepared by first blade-coating (3BS)₂-SiPc solution followed by P3HT coated on the top without any post-treatment. The conventional sequentially (Sq) blade-coated active layer presents very low performance due to the (3BS)₂-SiPc bottom layer being partially washed off by processing the top layer of P3HT. In contrast, alternate sequentially (Alt-Sq) blade-coated layer-by-layer film shows even better device performance compared to the bulk heterojunction (BHJ) active layer. Time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and atomic force microscopy (AFM) reveal that the Alt-Sq processing of the active layer leads to a BHJ-like morphology with a well-intermixed donor-acceptor component in the active layer while providing a simpler processing approach to low-cost and large-scale OPV production.

The Insolubility Problem of Organic Hole-Transport Materials Solved by Solvothermal Technology: Toward Solution-Processable Perovskite Solar Cells

Generally, the high efficiency of solution-processable perovskite solar cells (PSCs) comes at the expense of using expensive organic matters as a hole-transport material (HTM). Although intense efforts have tried to use commercially available and low-cost macrocyclic molecules as HTM candidates, they still face two enormous challenges: poor solubility and inherent instability. Here, solvothermal treatment for old and insoluble HTMs (phthalocyanine (Pc) and its derivatives) has been proposed, which is unusual due to the occurrence of solubilization for insoluble precursors induced by the carbonization of the dissolved part. Since the macrocyclic structure still exists, the as-prepared new-type carbon dots not only retain the capacity of hole transfer but serve as an effective passivation additive. Synergy makes the all-air-processed carbon-based PSCs (CH₃NH₃PbI₃) fabricated with carbon dots achieve a decent power conversion efficiency of 13.7%. Importantly, organics have undergone solvothermal treatment, completely breaking through the instability bottleneck, which exists in the long-term operation of PSCs. The universality of this methodology will usher exploration into other low-cost insoluble organics and drastically enhance the high-performance cost ratio of PSC equipment.

Use of Piers-Rubinsztajn Chemistry to Access Unique and Challenging Silicon Phthalocyanines

Axial functionalization is one mode that enables the solubility of silicon phthalocyanines (SiPcs). Our group observed that the use of typical axial functionalization methodologies on reaction of Cl₂SiPc with the chlorotriphenyl silane reagent unexpectedly resulted in the equal formation of triphenyl silyloxy silicon tetrabenzotriazacorrole ((3PS)-SiTbc) and the desired bis(tri-phenyl siloxy)-silicon phthalocyanine ((3PS)₂-SiPc). The formation of a (3PS)-SiTbc was unexpected, and the separation of (3PS)-SiTbc and (3PS)₂-SiPc was difficult. Therefore, in this study, we investigated the use of Piers-Rubinsztajn (PR) chemistry as an alternative method to functionalize the axial position of a SiPc to avoid the generation of a Tbc derivative. PR chemistry is a novel method to form a Si-O bond starting with a Si-H-based reactant and a -OH-based nucleophile enabled by tris(pentafluorophenyl)borane as a catalyst. The PR chemistry was screened on several fronts on how it can be applied to SiPcs. It was found that the process needs to be run in nitrobenzene at a molar ratio and at a particular temperature. To this end, the triphenylsiloxy derivative (3PS)₂-SiPc was produced and fully characterized, without the production of a Tbc derivative. In addition, we explored and outlined that the PR chemistry method can enable the formation of other SiPc derivatives that are inaccessible utilizing other established axial substitution chemistry methods such as (TM₃)₂-SiPc and (MDM)₂-SiPc. These additional materials were also physically characterized. The main conclusion is that the PR chemistry method can be applied to SiPcs and yield several alternative derivatives and has the potential to apply to additional macrocyclic compounds for unique derivative formation.

Variance-resistant PTB7 and axially-substituted silicon phthalocyanines as active materials for high-Voc organic photovoltaics

While the efficiency of organic photovoltaics (OPVs) has improved drastically in the past decade, such devices rely on exorbitantly expensive materials that are unfeasible for commercial applications. Moreover, examples of high voltage single-junction devices, which are necessary for several applications, particularly low-power electronics and rechargeable batteries, are lacking in literature. Alternatively, silicon phthalocyanines (R2-SiPc) are inexpensive, industrially scalable organic semiconductors, having a minimal synthetic complexity (SC) index, and are capable of producing high voltages when used as acceptors in OPVs. In the present work, we have developed high voltage OPVs composed of poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno [3,4 b]thiophenediyl}) (PTB7) and an SiPc derivative ((3BS)2-SiPc). While changes to the solvent system had a strong effect on performance, interestingly, the PTB7:(3BS)2-SiPc active layer were robust to spin speed, annealing and components ratio. This invariance is a desirable characteristic for industrial production. All PTB7:(3BS)2-SiPc devices produced high open circuit voltages between 1.0 and 1.07 V, while maintaining 80% of the overall efficiency, when compared to their fullerene-based counterpart.

The Rise of Silicon Phthalocyanine: From Organic Photovoltaics to Organic Thin Film Transistors

Silicon phthalocyanines are emerging n-type semiconductors for use in organic photovoltaics (OPVs) and organic thin-film transistors (OTFTs). Their low synthetic complexity paired with their versatile axial group facilitates the fine-tuning of their chemical properties, solution properties and processing characteristics without significantly affecting their frontier orbital levels or their absorption properties. The crystal engineering and film forming characteristics of silicon phthalocyanine semiconductors can be tuned through appropriate axial group functionalization, therefore facilitating their integration into both OTFTs and OPVs by solution processing or vapor deposition. This Spotlight on Applications will discuss recent advances in the integration of this exciting class of phthalocyanine into OTFTs and OPVs and highlights their promising future.

Thin-Film Engineering of Solution-Processable n-Type Silicon Phthalocyanines for Organic Thin-Film Transistors

Metal and metalloid phthalocyanines are an abundant and established class of materials widely used in the dye and pigment industry as well as in commercial photoreceptors. Silicon phthalocyanines (SiPcs) are among the highest-performing n-type semiconductor materials in this family when used in organic thin-film transistors (OTFTs) as their performance and solid-state arrangement are often increased through axial substitution. Herein, we study eight axially substituted SiPcs and their integration into solution-processed n-type OTFTs. Electrical characterization of the OTFTs, combined with atomic force microscopy (AFM), determined that the length of the alkyl chain affects device performance and thin-film morphology. The effects of high-temperature annealing and spin coating time on film formation, two key processing steps for fabrication of OTFTs, were investigated by grazing-incidence wide-angle X-ray scattering (GIWAXS) and X-ray diffraction (XRD) to elucidate the relationship between thin-film microstructure and device performance. Thermal annealing was shown to change both film crystallinity and SiPc molecular orientation relative to the substrate surface. Spin time affected film crystallinity, morphology, and interplanar d-spacing, thus ultimately modifying device performance. Of the eight materials studied, bis(tri-n-butylsilyl oxide) SiPc exhibited the greatest electron field-effect mobility (0.028 cm² V^-1 s^-1, a threshold voltage of 17.6 V) of all reported solution-processed SiPc derivatives.

Silicon phthalocyanines: synthesis and resurgent applications

Their unique axial bonds and NIR optical properties have made silicon phthalocyanines (SiPcs) valuable compounds. Herein, we present key synthetic strategies and emerging applications of SiPcs over the past decade.

Bis(trialkylsilyl oxide) Silicon Phthalocyanines: Understanding the Role of Solubility in Device Performance as Ternary Additives in Organic Photovoltaics

The use of ternary additives in organic photovoltaics is a promising route for improving overall device performance. Silicon phthalocyanines (SiPcs) are ideal candidates due to their absorption profile, low cost, and ease of synthesis and chemical tunability. However, to date, only a few examples have been reported and specific strategies for aiding in the design of improved ternary additives have not been established. In this study, we report a relationship between ternary additive solubility and device performance, demonstrating that device performance is maximized when the SiPc additive solubility is similar to that of the donor polymer (P3HT, in this case). This improved performance can be attributed to the favored interfacial precipitation of the SiPc when its solubility matches that of the other components of the thin film. The power conversion efficiency (PCE) varied from 2.4% to 3.4% by using axially substituted SiPcs with different solubilities, where the best ternary additive led to a 25% increase in PCE compared to that of the baseline device.

Old Molecule, New Chemistry: Exploring Silicon Phthalocyanines as Emerging N-Type Materials in Organic Electronics

Efficient synthesis of silicon phthalocyanines (SiPc) eliminating the strenuous reaction conditions and hazardous reagents required by classical methods is described. Implementation into organic thin-film transistors (OTFTs) affords average electron field-effect mobility of 3.1 × 10^-3 cm² V^-1 s^-1 and threshold voltage of 25.6 V for all synthetic routes. These results demonstrate that our novel chemistry can lead to high performing SiPc-based n-type OTFTs.

Recent Advances on Metal-Based Near-Infrared and Infrared Emitting OLEDs

During the past decades, the development of emissive materials for organic light-emitting diodes (OLEDs) in infrared region has focused the interest of numerous research groups as these devices can find interest in applications ranging from optical communication to defense. To date, metal complexes have been most widely studied to elaborate near-infrared (NIR) emitters due to their low energy emissive triplet states and their facile access. In this review, an overview of the different metal complexes used in OLEDs and enabling to get an infrared emission is provided.

Silicon Phthalocyanines as Acceptor Candidates in Mixed Solution/Evaporation Processed Planar Heterojunction Organic Photovoltaic Devices

Silicon phthalocyanines (SiPc) are showing promise as both ternary additives and non-fullerene acceptors in organic photovoltaics (OPVs) as a result of their ease of synthesis, chemical stability and strong absorption. In this study, bis(3,4,5-trifluorophenoxy) silicon phthalocyanine ((345F)2-SiPc)) and bis(2,4,6-trifluorophenoxy) silicon phthalocyanine ((246F)2-SiPc)) are employed as acceptors in mixed solution/evaporation planar heterojunction (PHJ) devices. The donor layer, either poly(3-hexylthiophene) (P3HT) or poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT), was spin coated followed by the evaporation of the SiPc acceptor thin film. Several different donor/acceptor combinations were investigated in addition to investigations to determine the effect of film thickness on device performance. Finally, the effects of annealing, prior to SiPc deposition, after SiPc deposition, and during SiPc deposition were also investigated. The devices which performed the best were obtained using PCDTBT as the donor, with a 90 nm film of (345F)2-SiPc as the acceptor, followed by thermal annealing at 150 °C for 30 min of the entire mixed solution/evaporation device. An open-circuit voltage (Voc) of 0.88 V and a fill factor (FF) of 0.52 were achieved leading to devices that outperformed corresponding fullerene-based PHJ devices.

Surface Coupling of Octaethylporphyrin with Silicon Tetrachloride

The surface assembly of 2,3,7,8,12,13,17,18-octaethylporphyrin (OEP) using silicon tetrachloride as a coupling agent was investigated using atomic force microscopy (AFM). Nanopatterned films of Si-OEP were prepared by protocols of colloidal lithography to evaluate the morphology, thickness, and molecular orientation for samples prepared on Si(111). The natural self-stacking of porphyrins can pose a challenge for molecular patterning. When making films on surfaces, porphyrins will self-associate to form co-planar configurations of random stacks of molecules. There is a tendency for the flat molecules to orient spontaneously in a side-on arrangement that is mediated by physisorption to the substrate as well as by π-π interactions between macrocycles to form a layered arrangement of packed molecules, analogous to a stack of coins. When silicon tetrachloride is introduced to the reaction vessel, the coupling between the surface and porphyrins is mediated through covalent Si-O bonding. For these studies, surface structures of Si-OEP were formed that are connected with a Si-O-Si motif to a silicon atom coordinated to the center of the porphyrin macrocycles. Protocols of colloidal lithography were used as a tool to prepare surface structures and films of Si-OEP to facilitate surface characterizations. Conceptually, by arranging the macrocycles of porphyrins with defined orientation, local AFM surface measurements can be enabled to help address mechanistic questions about how molecules self-assemble and bind to substrates.

Boron Subphthalocyanines and Silicon Phthalocyanines for Use as Active Materials in Organic Photovoltaics

Organic photovoltaics (OPVs) have experienced continued interest over the last 25 years as a viable technology for the generation of power. Phthalocyanines are among the oldest commercial dyes and have been utilized in some of the earliest examples of OPVs. In recent years, the use of boron subphthalocyanines (BsubPcs) and silicon phthalocyanines (SiPcs) has attracted a flurry of interest with some examples of fullerene-free devices reaching power conversion efficiencies >8 %. Unlike other more common divalent phthalocyanines such as copper or zinc, BsubPcs and SiPcs contain additional axial groups that can easily be functionalized without significantly affecting the optoelectronic properties of the macrocycle. This handle facilitates our ability to tune the solid-state arrangement and other physical characteristics such as solubility ultimately giving us the ability to improve the thin film processing and final device performance. This review covers recent studies on the development of BsubPcs and SiPcs for use as active materials in organic photovoltaics.

Versatile Synthesis of Siloxy Silicon Tetrabenzotriazacorroles and Insight into the Mode of Macrocycle Formation

Tetrabenzotriazacorroles (Tbcs) are a family of molecules related to phthalocyanines but have the unique ability to intensely absorb both blue and red light. Here, we report the synthesis of four novel silicon tetrabenzotriazacorrole derivatives (SiTbcs) with varying sized axial ligands. SiTbcs are formed starting from bis(hydroxy) silicon phthalocyanine ((OH)₂-SiPc) via a simple in situ axial functionalization and reductive chemical process using magnesium metal and the respective chlorosilane in pyridine. Systematic probing of the reaction conditions revealed that the reaction is acid-promoted and that the formation of the Tbc macrocycle occurs at temperatures as low as 40 °C. Results imply this chemistry can be extended to SiTbcs with any axial ligands using pyridine hydrochloride as an acid source. Single crystals of all compounds were grown and showed significant π-π interactions between the macrocycles in the solid state. Optical, electrochemical, and thermal characterization of these materials is also described. The SiTbcs exhibit interesting highly oxidative electrochemistry as well as high thermal stability and tunable phase transition behavior.

Chiral Phthalocyanines through Axial Coordination

A novel approach to axially induce chirality on silicon phthalocyanines via a microwave-assisted route is reported. CD analysis provides spectroscopic evidence that chirality is transferred onto both Soret and Q-bands of the phthalocyanine core. A chiral naphthalenediimide ligand was found to induce the largest Cotton effect on the macrocycle absorptions.

Near-Infrared Fluorescence of Silicon Phthalocyanine Carboxylate Esters

Seven silicon(IV) phthalocyanine carboxylate esters (SiPcs, 1–7) with non-, partially- and per-fluorinated aliphatic (linear or branched at the alpha-carbon) and aromatic ester groups have been synthesized, their solid-state structures determined and their optoelectronic properties characterized. The SiPcs exhibit quasi-reversible oxidation waves (vs. Fc⁺/Fc) at 0.58–0.75 V and reduction waves at −0.97 to −1.16 V centered on the phthalocyanine ring with a narrow redox gap range of 1.70–1.75 V. Strong absorbance in the near-infrared (NIR) region is observed for 1–7 with the lowest-energy absorption maximum (Q band) varying little as a function of ester between 682 and 691 nm. SiPcs 1–7 fluorescence in the near-infrared with emission maxima at 691–700 nm. The photoluminescence quantum yields range from 40 to 52%. As a function of esterification, the SiPcs 1–7 exhibit moderate-to-good solubility in chlorinated solvents, such as 1,2-dichlorobenzene and chloroform.

Simple design to achieve red-to-near-infrared emissive cationic Ir(iii) emitters and their use in light emitting electrochemical cells

Two cationic Ir(iii) complexes bearing bithiazole-type ancillary ligands have been synthesised and tested as deep red-to-near-infrared emitters in solution-processed electroluminescent devices.

Ultrasound-Induced Organogel Formation Followed by Thin Film Fabrication via Simple Doctor Blading Technique for Field-Effect Transistor Applications

We demonstrate doctor blading technique to fabricate high performance transistors made up of printed small molecular materials. In this regard, we synthesize a new soluble phthalocyanine, tetra-n-butyl peripheral substituted copper(II) phthalocaynine (CuBuPc), that can easily undergo gel formation upon ultrasonic irradiation, leading to the formation of three-dimensional (3D) network composed of one-dimensional (1D) nanofibers structure. Finally, taking the advantage of thixotropic nature of the CuBuPc organogel, we use the doctor blade processing technique that limits the material wastage for the fabrication of transistor devices. Due to the ultrasound induced stronger π-π interaction, the transistor fabricated by doctor blading based on CuBuPc organogel exhibits significant increase in charge carrier mobility in comparison with other solution process techniques, thus paving a way for a simple and economically viable preparation of electronic circuits.