Diaminopropionic Acid Reinforced Graphene Sponge and Its Use for Hemostasis

A macromolecular cross-linked alginate aerogel with excellent concentrating effect for rapid hemostasis

Alginate-based materials present promising potential for emergency hemostasis due to their excellent properties, such as procoagulant capability, biocompatibility, low immunogenicity, and cost-effectiveness. However, the inherent deficiencies in water solubility and mechanical strength pose a threat to hemostatic efficiency. Here, we innovatively developed a macromolecular cross-linked alginate aerogel based on norbornene- and thiol-functionalized alginates through a combined thiol-ene cross-linking/freeze-drying process. The resulting aerogel features an interconnected macroporous structure with remarkable water-uptake capacity (approximately 9000 % in weight ratio), contributing to efficient blood absorption, while the enhanced mechanical strength of the aerogel ensures stability and durability during the hemostatic process. Comprehensive hemostasis-relevant assays demonstrated that the aerogel possessed outstanding coagulation capability, which is attributed to the synergistic impacts on concentrating effect, platelet enrichment, and intrinsic coagulation pathway. Upon application to in vivo uncontrolled hemorrhage models of tail amputation and hepatic injury, the aerogel demonstrated significantly superior performance compared to commercial alginate hemostatic agent, yielding reductions in clotting time and blood loss of up to 80 % and 85 %, respectively. Collectively, our work illustrated that the alginate porous aerogel overcomes the deficiencies of alginate materials while exhibiting exceptional performance in hemorrhage, rendering it an appealing candidate for rapid hemostasis.

Self-Healing Guar Gum-Based Nanocomposite Hydrogel Promotes Infected Wound Healing through Photothermal Antibacterial Therapy

Preventing bacterial infections is a crucial aspect of wound healing. There is an urgent need for multifunctional biomaterials without antibiotics to promote wound healing. In this study, we fabricated a guar gum (GG)-based nanocomposite hydrogel, termed GBTF, which exhibited photothermal antibacterial therapy for infected wound healing. The GBTF hydrogel formed a cross-linked network through dynamic borate/diol interactions between GG and borax, thereby exhibiting simultaneously self-healing, adaptable, and injectable properties. Additionally, tannic acid (TA)/Fe3+ nanocomplexes (NCs) were incorporated into the hydrogel to confer photothermal antibacterial properties. Under the irradiation of an 808 nm near-infrared laser, the TA/Fe3+ NCs in the hydrogel could rapidly generate heat, leading to the disruption of bacterial cell membranes and subsequent bacterial eradication. Furthermore, the hydrogels exhibited good cytocompatibility and hemocompatibility, making them a precandidate for preclinical and clinical applications. Finally, they could significantly promote bacteria-infected wound healing by reducing bacterial viability, accelerating collagen deposition, and promoting epithelial remodeling. Therefore, the multifunctional GBTF hydrogel, which was composed entirely of natural substances including guar gum, borax, and polyphenol/ferric ion NCs, showed great potential for regenerating infected skin wounds in clinical applications.

Recent Advances in Topical Hemostatic Materials

Untimely or improper treatment of traumatic bleeding may cause secondary injuries and even death. The traditional hemostatic modes can no longer meet requirements of coping with complicated bleeding emergencies. With scientific and technological advancements, a variety of topical hemostatic materials have been investigated involving inorganic, biological, polysaccharide, and carbon-based hemostatic materials. These materials have their respective merits and defects. In this work, the application and mechanism of the major hemostatic materials, especially some hemostatic nanomaterials with excellent adhesion, good biocompatibility, low toxicity, and high adsorption capacity, are summarized. In the future, it is the prospect to develop multifunctional hemostatic materials with hemostasis and antibacterial and anti-inflammatory properties for promoting wound healing.

Fabricating the multibranch carboxyl-modified cellulose for hemorrhage control

Excessive bleeding is associated with a high mortality risk. In this study, citric acid and ascorbic acid were sequentially modified on the surface of microcrystalline cellulose (MCAA) to increase its carboxyl content, and their potential as hemostatic materials was investigated. The MCAA exhibited a carboxylic group content of 9.52 %, higher than that of citric acid grafted microcrystalline cellulose (MCA) at 4.6 %. Carboxyl functionalization of microcrystalline cellulose surfaces not only plays a fundamental role in the structure of composite materials but also aids in the absorption of plasma and stimulation of platelets. Fourier -transform infrared (FT-IR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) spectra confirmed that carboxyl groups were successfully introduced onto the cellulose surface. Physical properties tests indicated that the MCAA possessed higher thermal stability (Tmax = 472.2 °C) compared to microcrystalline cellulose (MCC). Additionally, in vitro hemocompatibility, cytotoxicity and hemostatic property results demonstrated that MCAA displayed good biocompatibility (hemolysis ratio <1 %), optimal cell compatibility (cell viability exceeded 100 % after 72 h incubation), and impressive hemostatic effect (BCIMCAA = 31.3 %). Based on these findings, the hemostatic effect of covering a wound with MCAA was assessed, revealing enhanced hemostatic properties using MCAA in tail-amputation and liver-injury hemorrhage models. Furthermore, exploration into hemostatic mechanisms revealed that MCAA can significantly accelerate coagulation through rapid platelet aggregation and activation of the clotting cascade. Notably, MCAA showed remarkable biocompatibility and induced minimal skin irritation. In conclusion, the results affirmed that MCAA is a safe and potentially effective hemostatic agent for hemorrhage control.

Progress in injectable hydrogels for the treatment of incompressible bleeding: an update

Uncontrollable haemorrhage from deep, noncompressible wounds remains a persistent and intractable challenge, accounting for a very high proportion of deaths in both war and disaster situations. Recently, injectable hydrogels have been increasingly studied as potential haemostatic materials, highlighting their enormous potential for the management of noncompressible haemorrhages. In this review, we summarize haemostatic mechanisms, commonly used clinical haemostatic methods, and the research progress on injectable haemostatic hydrogels. We emphasize the current status of injectable hydrogels as haemostatic materials, including their physical and chemical properties, design strategy, haemostatic mechanisms, and application in various types of wounds. We discuss the advantages and disadvantages of injectable hydrogels as haemostatic materials, as well as the opportunities and challenges involved. Finally, we propose cutting-edge research avenues to address these challenges and opportunities, including the combination of injectable hydrogels with advanced materials and innovative strategies to increase their biocompatibility and tune their degradation profile. Surface modifications for promoting cell adhesion and proliferation, as well as the delivery of growth factors or other biologics for optimal wound healing, are also suggested. We believe that this paper will inform researchers about the current status of the use of injectable haemostatic hydrogels for noncompressible haemorrhage and spark new ideas for those striving to propel this field forward.

Sea Cucumber-Inspired Aerogel for Ultrafast Hemostasis of Open Fracture

The symptomatic management of hemorrhagic shock complicated by open fractures is a great challenge, because it is also complicated by complex wound bleeding, bacterial infection, and bone defects. Inspired by the water absorption and cross-sectional microstructure of sea cucumbers, in this study, a new sea cucumber-like aerogel (GCG) is proposed. Its aligned porous structure and composition can stop bleeding rapidly and effectively with a blood clotting index of 3.73 ± 1.8%. More importantly, the data of in vivo hemostasis test in an amputating rat tail hemostatic model (15.69 ± 2.45 s, 26.95 ± 8.43 mg) and liver puncture bleeding model (23.77 ± 2.68 s, 36.22 ± 16.92 mg) also indicate the excellent hemostatic performance of GCG. In addition, GCG also shows a significant inhibitory effect on S. aureus and E. coli, which can prevent the occurrence of postoperative osteomyelitis. Not only that, after filling in the bone defect, it is shown that this GCG aerogel completely degrades eight weeks after surgery and induces new bone ingrowth, achieving functional regeneration after hemostasis of an open fracture defect. Generally, because of its combination of hemostatic, antibacterial, and osteogenic activities, this new aerogel is a promising option for open fractures treatment.

Hydrophilic chitosan/graphene oxide composite sponge for rapid hemostasis and non-rebleeding removal

Hydrophilic hemostatic sponge plays an important role in trauma bleeding control because of its robust coagulant functions. However, its strong tissue adhesion can easily result in wound tear and rebleeding during removing the sponge. Herein, the design of a hydrophilic anti-adhesive chitosan/graphene oxide composite sponge (CSAG) that possesses stable mechanical strength, rapid liquid absorption and strong intrinsic/extrinsic coagulation stimulations, is reported. For one thing, CSAG exhibits outstanding hemostatic performance, which significantly outperforms two commercial hemostats in two in vivo serious bleeding models. For another, CSAG shows low tissue adhesion; its peeling force is approximately 79.3 % lower than the commercial gauze. Moreover, in the peeling process, CSAG triggers partial detachment of the blood scab, because of the exist of bubbles or cavities at the interface, allowing the CSAG to be easily and safely peeled off from the wound without rebleeding. This study opens new avenues in constructing anti-adhesive trauma hemostatic materials.

Injectable, antibacterial, and oxygen-releasing chitosan-based hydrogel for multimodal healing of bacteria-infected wounds

Bacterial infection is one of the main challenges of wound healing. It imposes financial and healthcare costs. The emergence of antibiotic-resistant bacteria has increased concerns about this challenge, and made finding alternative solutions a crucial aim. We created a new, antibacterial, multifunctional hydrogel with synergistic chemodynamic and photothermal features for wound-healing applications. We fabricated a chitosan (CT)-based hydrogel containing tannic acid (TA), Fe, and MnO2 nanosheets (CT-TA-Fe-MnO2) via a simple method and characterized it. The antibacterial features (resulting from the production of reactive oxygen species within bacterial cells) and healing ability (via anti-inflammatory and hemostatic features) of the hydrogel were confirmed in vitro. In vivo results revealed the effectiveness of the CT-TA-Fe-MnO2 hydrogel in decreasing the hemostatic time, improving anti-inflammatory effects, and promoting wound healing during 14 days by enhancing the deposition and maturation of collagen fibers without affecting the vital organs. The fabricated CT-TA-Fe-MnO2 hydrogel could be a promising candidate with antibacterial and anti-inflammatory activities suitable for wound-healing applications.

Photodynamic chitosan sponges with dual instant and enduring bactericidal potency for treating skin abscesses

The emergence of multidrug-resistant (MDR) bacteria has made wound infection treatment difficult, calling for novel strategies for effective elimination of bacteria in wounds and promoting their recovery. Herein, we report a novel chitosan antibacterial sponge combining zinc oxide particles (ZnO) and the photosensitizer chlorin e6 (Ce6), named CS-ZnO/Ce6 sponge for combating multidrug-resistant bacteria and treating skin abscesses. The fabricated CS-ZnO/Ce6 sponge had porous structure with high porosity, conducive to absorbing the wound exudate. Meanwhile, the hemostatic property of this sponge enabled it to stop the continuous bleeding of the wound. Upon 660 nm light irradiation, the CS-ZnO/Ce6 sponge exhibited an instant photodynamic bactericidal effect against several typical MDR strains, and the presence of ZnO could continuously inhibit bacterial growth. In addition, local remedy of methicillin-resistant Staphylococcus aureus (MRSA)-infected mice with CS-ZnO/Ce6 sponge with light irradiation caused a potent immediate bacterial killing effect and prolonged bacteriostasis in mice with skin abscesses, leading to the rapid recovery of the wound. The biocompatibility of the CS-ZnO/Ce6 sponge in mice was also verified by histological examination of the main organs. Collectively, the CS-ZnO/Ce6 sponge with broad-spectrum antibacterial activity and long-term bacterial inhibition potential could be useful for treating microbial infections and accelerating wound healing.

A self-gelling powder based on polyacrylic acid/polyacrylamide/quaternate chitosan for rapid hemostasis

In order to improve the hemostatic effect of the hemostatic dressing for non-compressible wounds, unknown bleeding points and irregularly shaped wounds, a self-gelling hemostasis powder based on polyacrylic acid/polyacrylamide/quaternate chitosan (PAA/PAM/QCS) is prepared in this study. When in contact with water, the PAA/PAM/QCS can fuse and rapidly form a stable hydrogel in a short time (< 0.25 min). The PAA/PAM ratio is the main parameter that modulates the formation of the self-gel. The PAA/PAM self-gel can be formed only when the PAA/PAM ratio is 5:5, and the introduction of QCS does not influence the self-gelling behaviors and hydrogel stability. Moreover, the PAA/PAM/QCS self-gel shows good adhesive properties on wet tissue surfaces. In addition, the introduction of QCS improves the antibacterial activity of the self-gelling hemostasis powder. Furthermore, the prepared PAA/PAM/QCS powder can rapidly adsorb lots of blood, aggregate blood cells and platelets. The hemostatic results in vivo show that PAA/PAM/QCS powder is superior to the control group and commercial product groups (chitosan powder) with performance similar to hemostatic zeolite in terms of the amount of bleeding and hemostatic time. Therefore, the PAA/PAM/QCS self-gelling powder shows great application prospects for rapid hemostasis.

Gelatin/calcium chloride electrospun nanofibers for rapid hemostasis

Blood coagulation is the body's main defense to bleeding caused by trauma and is divided into endogenous and exogenous pathways. Calcium ions play a very important role in the process of blood coagulation, as the ions activate the many enzymes that are required for coagulation. In this paper, gelatin hemostatic membranes containing calcium ions were prepared by electrospinning. The fibers were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The biocompatibility and coagulation processes using the calcium ion-containing gelatin fibrous membranes were evaluated in vitro with dynamic whole-blood coagulation tests, hemolysis tests, coagulation time tests, and platelet adhesion tests. It was demonstrated that the calcium ion-containing gelatin membranes had lower hemolysis rates and shorter clotting times than commercially available hemostatic sponges and hemostatic gauzes. In vivo hemostasis experiments were also conducted on the tail vein and liver of mice. Animal experiments demonstrated that the incorporation of calcium ions into the electrospun gelatin membranes promoted platelet aggregation, ensured adhesion of the electrospun membrane to the wound and reduced the bleeding volume and hemostasis time. The composite calcium ion-gelatin electrospun membranes exhibited good in vivo and in vitro hemostatic abilities and accelerated blood clotting by stimulating the coagulation pathway to promote platelet aggregation at the wounds and the formation of mature blood clots for a new approach for acute trauma treatment.

Chitosan-Urushiol nanofiber membrane with enhanced acid resistance and broad-spectrum antibacterial activity

Due to the large specific surface area and rich pore structure, chitosan nanofiber membrane has many advantages over conventional gel-like or film-like products. However, the poor stability in acidic solutions and relatively weak antibacterial activity against Gram-negative bacteria severely restrict its use in many industries. Here, we present a chitosan-urushiol composite nanofiber membrane prepared by electrospinning. Chemical and morphology characterization revealed that the formation of chitosan-urushiol composite involved the Schiff base reaction between catechol and amine groups and the self-polymerization of urushiol. The unique crosslinked structure and multiple antibacterial mechanisms endowed the chitosan-urushiol membrane with outstanding acid resistance and antibacterial performance. After immersion in HCl solution at pH 1, the membrane maintained its intact appearance and satisfactory mechanical strength. In addition to its good antibacterial performance against Gram-positive Staphylococcus aureus (S. aureus), the chitosan-urushiol membrane exhibited synergistic antibacterial activity against Gram-negative Escherichia coli (E. coli) that far exceeded that of neat chitosan membrane and urushiol. Moreover, cytotoxicity and hemolysis assays revealed that the composite membrane had good biocompatibility similar to that of neat chitosan. In short, this work provides a convenient, safe, and environmentally friendly method to simultaneously enhance the acid resistance and broad-spectrum antibacterial activity of chitosan nanofiber membranes.

A natural polyphenol-functionalized chitosan/gelatin sponge for accelerating hemostasis and infected wound healing

Natural polymers have been particularly appealing for constructing hemostatic materials/devices, but it is still desirable to develop new natural polymer-based biomaterials with balanced hemostatic and wound-healing performance. In this work, a natural polyphenol-functionalized chitosan/gelatin sponge (PCGS) was prepared by the lyophilization of a chitosan/gelatin mixture solution (under a self-foaming condition to prepare the CGS) and subsequent chemical cross-linking with procyanidin (PC). Compared with the original CGS, PCGS exhibited an enhanced liquid-absorption ability, reduced surface charges, and similar/low hemolysis rate. Benefiting from such a liquid-absorption ability (∼4000% for whole blood and normal saline) and moderate surface charges, PCGS exhibited high in vitro hemostatic property and promising hemostatic performance in an in vivo femoral-artery-injury model. In addition, PCGS possessed higher antioxidant property and slightly decreased antibacterial ability than CGS, owing to the incorporation of PC. The feasibility of PCGS for treating infected wounds was further confirmed in an in vivo infected-tooth-extraction model, as the typical complication of intractable tooth-extraction bleeding. The present work demonstrated a facile approach for developing multifunctional hemostatic materials through the flexible management of natural polymers and polyphenols.

Poly β-Cyclodextrin/Quaternary Ammoniated Chitosan Cryogel with a Porous Structure for Effective Hemostasis

Uncontrolled bleeding is one of the most important causes threatening human health, but quick hemostasis remains a challenge. We prepared porous cryogels with poly β-cyclodextrin (Pβ-CD) and quaternary ammoniated chitosan (QCs). Pβ-CD acts as a "water-grabbing agent" to assist QCs' ability to absorb and concentrate blood rapidly. The rat-tail amputation model and liver injury model exhibited that cryogels had excellent hemostatic performance. Moreover, cryogels showed good antibacterial activity and biocompatibility. Therefore, these cryogels can be used as potential hemostatic materials.

Hemostatic effects of FmocF-ADP hydrogel consisted of Fmoc-Phenylalanine and ADP

During trauma and surgery, bleeding is a major concern. One of the crucial strategies for hemostasis is the use of biological hemostatic material. Herein, we reported an amino acid-based hydrogel FmocF-ADP hydrogel, which consisted of N-[(9H-fluoren-9-ylmethoxy) carbonyl]-3-phenyl-L-alanine (FmocF) and adenosine diphosphate (ADP) sodium solution. The hydrogel was created by FmocF self-assembling to nanofiber in ADP sodium solution and then cross-linking to hydrogel. FmocF-ADP hydrogel showed good in vitro coagulation activity as measured by whole blood clotting assays, platelet clotting assays, platelet activation assays, and platelet adhesion assays. Further, it was noted to reveal an exceptional in vivo hemostatic effect in a mouse liver bleeding model. Together with the previous report of the good biocompatibility and antimicrobial activity of FmocF hydrogel, our study would extend the biomedical application of FmocF hydrogel. In conclusion, the present study would provide a constructive strategy for the development of new antimicrobial and hemostatic materials or develop a potential hemostatic material.

Multifunctionalized alginate/polydopamine cryogel for hemostasis, antibacteria and promotion of wound healing

Hemostasis and anti-infection are crucial for emergency treatment of severe trauma. Developing functional biomaterial with efficient hemostasis, antibacterial activity and wound healing is of great social significance and clinical value to fast stop bleeding and save lives, but it is still challenged. Here we designed a series of multifunctionalized SA/PDA cryogels by using two-step cross-linking of dopamine and sodium alginate. The resulting interpenetrating network structure had good swelling ratio, excellent mechanical and shape memory properties. Compared with cotton gauze and gelatin sponge, the cryogels exhibited excellent activation of coagulation cascade, more blood cells and platelet adhesion. Due to the action of polydopamine, the cryogel also showed good antioxidant activity and photothermal antibacterial ability assisted by near-infrared radiation, as well as better wound healing performance than gelatin sponge and Tegaderm™ film. Moreover, in the tests of mouse tail docking model, rat femoral artery hemostasis model and non-compressible rabbit liver defect model, the treatment by SA/PDA cryogels presented less blood loss and shorter hemostasis time than cotton gauze and gelatin sponge. Therefore, SA/PDA cryogels with simple preparation process, low cost, and good biocompatibility would be applied in the variety of great clinical applications in bleeding control, anti-infection and wound healing, etc.

Water-Swellable Cellulose Nanofiber Aerogel for Control of Hemorrhage from Penetrating Wounds

Uncontrolled hemorrhage from wounds with deep and irregular cavities is short of efficient hemostats. Here we report a citric acid-cross-linked carboxymethyl cellulose nanofiber (CA-CMCNF) aerogel for the control of bleeding from penetrating wounds. The compressed CA-CMCNF aerogel could quickly swell into its original shape in water in seconds. The maximum mass and volume expansion ratios were over 6800 and 3000%, respectively. The water-swellable property allows the aerogel to self-expand and fill in the cavities of wounds. The in situ-generated expansion pressure resisted the systolic blood pressure, and the plentiful carboxyl groups triggered the active coagulation pathway, both contributing to the hemostatic capability of the aerogel. Additionally, the aerogel had good biocompatibility and excellent antibacterial capability. The animal experiments revealed that the aerogels significantly reduced both the hemostasis time and the amount of bleeding in a liver penetrating model. Therefore, this study provides a safe and robust hemostatic aerogel for controlling bleeding from penetrating wounds.

Generation of cost-effective MXene@polydopamine-decorated chitosan nanofibrous wound dressing for promoting wound healing

Herein, we designed and fabricated a MXene@polydopamine (MXene@PDA)-decorated chitosan non-woven fabric (M-CNF) hemostatic dressing with super hydrophilic properties for wound repair and regeneration. The M-CNF exhibit excellently wettability characteristics which can rapidly absorb water from blood. Moreover, M-CNF with 15 mg/mL MXene@PDA (M-CNF-15) show better antibacterial performance, excellent blood-clotting performance, better blood cell and platelet adhesion ability than CNF, displaying both active and passive hemostatic mechanisms to accelerate blood clotting in mouse-liver injury model. In addition, the M-CNF-15 also shows better wound healed performance than Tegaderm™ film in a full-thickness skin defect model, and further demonstrating that the MXene@PDA can promote fibrinogen reformation the at the initial phases of the wound healing process. Therefore, this strategy for designing and manufacturing of multi-functional M-CNF wound dressing will have great potential for active local hemostasis and wound repair and regeneration.

The Effect on Hemostasis of Gelatin-Graphene Oxide Aerogels Loaded with Grape Skin Proanthocyanidins: In Vitro and In Vivo Evaluation

Using in vitro and in vivo models, this study investigated the hemostatic potential to control bleeding of both unloaded gelatin-graphene oxide aerogels and the same loaded with proanthocyanidins (PAs) from Vitis vinifera grape skin extract. Our results showed that the physicochemical and mechanical properties of the aerogels were not affected by PA inclusion. In vitro studies showed that PA-loaded aerogels increased the surface charge, blood absorption capacity and cell viability compared to unloaded ones. These results are relevant for hemostasis, since a greater accumulation of blood cells on the aerogel surface favors aerogel–blood cell interactions. Although PAs alone were not able to promote hemostasis through extrinsic and intrinsic pathways, their incorporation into aerogels did not affect the in vitro hemostatic activity of these composites. In vivo studies demonstrated that both aerogels had significantly increased hemostatic performance compared to SpongostanTM and gauze sponge, and no noticeable effects of PA alone on the in vivo hemostatic performance of aerogels were observed; this may have been related to its poor diffusion from the aerogel matrix. Thus, PAs have a positive effect on hemostasis when incorporated into aerogels, although further studies should be conducted to elucidate the role of this extract in the different stages of hemostasis.

Graphene-ophicalcite heterogeneous composite sponge for rapid hemostasis

Synergistic functionalization of interface coagulation stimulation and liquid absorption capacity is the key to improve the hemostatic efficiency of hemostats. Herein, we prepared a graphene-ophicalcite (OPH) heterogeneous composite sponge (GOCS) by using the heterogeneous gradient composite strategy. The sponge took cross-linked graphene sponge (CGS) as the main skeleton, allowing the OPH to be controllably positioned on the surface of GOCS. The heterogeneous strategy gave full play to the advantages of the material. On the one hand, GOCS had excellent liquid absorption ability, which enriched blood cells and other coagulation components at the wound interface after contacting blood. On the other hand, the OPH at the interface obviously activated platelets and rapidly triggered coagulation cascade reactions, exhibiting fast response and feedback characteristics for coagulation signals. Under the synergistic effects, the blood clotting index value of GOCS was reduced to 33.87 ± 9.97%, which was significantly lower than those of OPH (46.33 ± 16.85%) and CGS (67.53 ± 5.35%). Importantly, GOCS rapidly stopped bleeding within 51 s in the rat femoral artery model, suggesting its great potential in the field of hemostasis. Therefore, this study provides a new idea for the design and preparation of hemostatic materials via heterogeneous strategy.

Novel and effective hemostats based on graphene oxide-polymer aerogels: In vitro and in vivo evaluation

In this study, graphene oxide (GO)-based aerogels cross-linked with chitosan (CS), gelatin (GEL), and polyvinyl alcohol (PVA) were characterized and their hemostatic efficiencies both in vitro and in vivo were investigated and compared to commercial materials (ChitoGauze®XR and Spongostan™). All aerogels exhibited highly porous structures and a negative surface charge density favorable to their interaction with blood cells. The in vitro studies showed that all aerogels coagulated >60 % of the blood contained in their structures after 240 s of the whole-blood clotting assay, the GO-CS aerogel being the one with the highest blood clotting. All aerogels showed high hemocompatibility, with hemolytic rates <5 %, indicating their use as biomaterials. Among them, the GO-GEL aerogel exhibited the lowest hemolytic activity, due possibly to its high GEL content compared to the GO amount. According to their blood clotting activity, aerogels did not promote coagulation through extrinsic and intrinsic pathways. However, their surfaces are suitable for accelerating hemostasis by promoting alternative routes. All aerogels adhered platelets and gathered RBCs on their surfaces, and in addition the GO-CS aerogel surface also promoted the formation of filamentous fibrin networks adhered on its structure. Furthermore, in vivo evaluations revealed that all aerogels significantly shortened the hemostatic times and reduced the blood loss amounts compared both to the Spongostan™ and ChitoGauze®XR commercial materials and to the gauze sponge (control group). The hemostatic performance in vitro and in vivo of these aerogels suggests that they could be used as hemostats for controlling profuse bleedings.

Engineered Hemostatic Biomaterials for Sealing Wounds

Hemostatic biomaterials show great promise in wound control for the treatment of uncontrolled bleeding associated with damaged tissues, traumatic wounds, and surgical incisions. A surge of interest has been directed at boosting hemostatic properties of bioactive materials via mechanisms triggering the coagulation cascade. A wide variety of biocompatible and biodegradable materials has been applied to the design of hemostatic platforms for rapid blood coagulation. Recent trends in the design of hemostatic agents emphasize chemical conjugation of charged moieties to biomacromolecules, physical incorporation of blood-coagulating agents in biomaterials systems, and superabsorbing materials in either dry (foams) or wet (hydrogel) states. In addition, tough bioadhesives are emerging for efficient and physical sealing of incisions. In this Review, we highlight the biomacromolecular design approaches adopted to develop hemostatic bioactive materials. We discuss the mechanistic pathways of hemostasis along with the current standard experimental procedures for characterization of the hemostasis efficacy. Finally, we discuss the potential for clinical translation of hemostatic technologies, future trends, and research opportunities for the development of next-generation surgical materials with hemostatic properties for wound management.

Chitosan-based composites reinforced with antibacterial flexible wood membrane for rapid hemostasis

Irregular hemorrhagic traumas always threaten the health of patients due to uncontrollable bleeding and wound infections. The traditional hemostatic materials show dissatisfactory hemostatic efficiency and antibacterial activity in solving these potential bleeding dangers. Herein, we proposed a kind of composites based on flexible wood membrane (FWM) loaded with chitosan/alginate derivative for accelerating rapid hemostasis and preventing infection. FWM was removed part of hemicellulose and lignin by using NaOH/Na₂SO₃ mixture to obtain excellent flexibility while retaining the original porous structure, followed by loading silver nanoparticles on the FWM surface to prepare AgNPs-FWM as an antibacterial bio-carrier. Then, AgNPs-FWM was coated with polyoxyethylene stearate-modified chitosan and multi-aldehyde sodium alginate to fabricate the composites of chitosan/alginate/AgNPs-FWM (CSA/AgNPs-FWM) using in-situ Schiff base reaction. Furthermore, in vitro and in vivo experiments showed that the CSA/AgNPs-FWM composites exhibited lower BCI value (2.6 ± 1.3 %), more rapid hemostasis (26 s) and lower blood loss (67.8 mg) than that of the traditional materials. The possible mechanism for the hemostasis process was not only the high blood absorption capacity, but also the synergistic interaction between hydrophobic alkane chains, amino groups, aldehydes, hydroxyl groups and blood cells. Moreover, CSA/AgNPs-FWM showed exceptional superiorities in mechanical properties and antibacterial activity, which endowed composites high potential in hemostasis application for irregular external wound.

Berberine coated biocomposite hemostatic film based alginate as absorbable biomaterial for wound healing

In wound treatment, severe bleeding and infection are always primary challenges. Therefore, it is highly desired to develop novel dressing with both hemostatic and antibacterial capability. Herein, a series of biocomposite hemostatic films (BHFs) based alginate/chitosan/collagen-berberine have been prepared and well characterized for further biofunctional study. We have demonstrated that the hemostatic and antibacterial activities were significantly enhanced by calcium/berberine dual-crosslinking system in the film. Through the synergistic effects, BHF-6B exhibited a shorter in vivo clotting and wound healing time than that of commercial dressing in rat tail amputation and full-thickness skin defect models. Additionally, BHF-6B showed excellent bacteriostatic activity with long-term effects. Moreover, hemolysis and cytotoxicity tests in vitro illustrated the prominent biocompatibility of the composite films. Notably, BHF-6B could be degraded quickly and completely in vivo. Overall, the present work indicated that the functionalized BHF-6B has great potential as an absorbable biomaterial for wound treatment.

Poly(aspartic acid) based self-healing hydrogel with blood coagulation characteristic for rapid hemostasis and wound healing applications

External hemorrhage, caused by insufficient hemostasis or surgical failure, could leads to shock or even tissue necrosis as the results of excessive blood loss. Furthermore, delayed coagulation, chronic inflammation, bacterial infection and slow cell proliferation are also major challenges to effective wound repairing. In this study, a novel hemostatic hydrogel was prepared by cross-linking inorganic polyphosphate (PolyP) conjugated poly(aspartic acid) hydrazide (PAHP) and PEO₉₀ dialdehyde (PEO₉₀ DA). Based on the dynamic characteristics of the acylhydrazone bond, the hydrogel could repair its cracks when broken under external forces. At the same time, the hydrogel showed outstanding biocompatibility and tissue adhesion with remarkable hemostatic performance. The New Zealand rabbit ear artery used as a in vivo hemostasis model and the results showed the PAHP hydrogel could stop bleeding of traumatic wound and reduce blood loss significantly. Meanwhile, the PAHP hydrogel presented intrinsic antibacterial activity, thus could inhibit the bacterial infection. In addition, the hydrogel loaded with mouse epidermal growth factor (mEGF) accelerated the wound repair rate and promoted the regeneration of fresh tissue in the mouse full thickness skin defect model. Altogether, the PAHP hydrogels exhibits great potential in the biomedical application, especially in wound dressing materials and tissue repairing.

N, O-carboxymethyl chitosan/oxidized cellulose composite sponge containing ε-poly-l-lysine as a potential wound dressing for the prevention and treatment of postoperative adhesion

Herein, we designed and fabricated a biodegradable composite sponge which main component contained N, O-carboxymethyl chitosan (N,O-CS) and oxidized cellulose nanocrystals (TOCN) as a potential wound dressing for the prevention and treatment of postoperative adhesion. In order to improve antimicrobial properties of N,O-CS/TOCN composite sponges, natural antimicrobial agents (ε-Poly-l-Lysine，EPL) were successfully introduced and the EPL/N,O-CS/TOCN composite sponge exhibited excellent antibacterial properties and biological security. The EPL/N,O-CS/TOCN composite sponge can be degraded in vivo within 3 weeks. Finally, we analyzed the anti-adhesion performance of EPL/N,O-CS/TOCN composite sponge through a rat model of sidewall defect-cecum abrasion. These results demonstrated that EPL/N,O-CS/TOCN-treated group can effectively reduce the peritoneal adhesion formation than the commercial soluble gauze group and normal saline group, which mainly attribute to the excellent hemostatic function and tissue repair function of EPL/N,O-CS/TOCN composite sponge. It is believed that the EPL/N,O-CS/TOCN composite sponge will prove to be as a new medical device treat the internal tissue/organ repair and simultaneous prevention of postoperative adhesion.

Enhanced postoperative cancer therapy by iron-based hydrogels

Surgical resection is a widely used method for the treatment of solid tumor cancers. However, the inhibition of tumor recurrence and metastasis are the main challenges of postoperative tumor therapy. Traditional intravenous or oral administration have poor chemotherapeutics bioavailability and undesirable systemic toxicity. Polymeric hydrogels with a three-dimensional network structure enable on-site delivery and controlled release of therapeutic drugs with reduced systemic toxicity and have been widely developed for postoperative adjuvant tumor therapy. Among them, because of the simple synthesis, good biocompatibility, biodegradability, injectability, and multifunctionality, iron-based hydrogels have received extensive attention. This review has summarized the general synthesis methods and construction principles of iron-based hydrogels, highlighted the latest progress of iron-based hydrogels in postoperative tumor therapy, including chemotherapy, photothermal therapy, photodynamic therapy, chemo-dynamic therapy, and magnetothermal-chemical combined therapy, etc. In addition, the challenges towards clinical application of iron-based hydrogels have also been discussed. This review is expected to show researchers broad perspectives of novel postoperative tumor therapy strategy and provide new ideas in the design and application of novel iron-based hydrogels to advance this sub field in cancer nanomedicine.

Development of a Microenvironment-Responsive Hydrogel Promoting Chronically Infected Diabetic Wound Healing through Sequential Hemostatic, Antibacterial, and Angiogenic Activities

Microenvironment-responsive hydrogels present high potential in treating refractory wounds due to their capability of on-demand drug release. In this study, a specially designed hydrogel with smart targeting of refractory wound characteristics was designed to treat chronically infected diabetic wounds. Aminated gelatin reacted with oxidized dextran, forming a hydrogel cross-linked with a dynamic Schiff base, which is sensitive to the low-pH environment in refractory wounds. Nano-ZnO was loaded into the hydrogel for killing microbes. A Paeoniflorin-encapsulated micelle with a ROS-responsive property was fixed to the skeleton of the hydrogel via a Schiff base bond for low-pH- and ROS-stimulated angiogenic activity. The sequential responsiveness of the novel hydrogel enabled smart rescue of the deleterious microenvironment in refractory wounds. This highly biocompatible hydrogel demonstrated antibacterial and angiogenic abilities in vitro and significantly promoted healing of chronically infected diabetic wounds via sequential hemostatic, microbe killing, and angiogenic activities. This microenvironment-responsive hydrogel loaded with nZnO and Pf-encapsulated micelles holds great potential as a location-specific dual-response delivery platform for curing refractory, chronically infected diabetic wounds.

In situ Thermal-Responsive Magnetic Hydrogel for Multidisciplinary Therapy of Hepatocellular Carcinoma

Current surgical single modality treatments for hepatocellular carcinoma (HCC) were restricted by recurrence, blood loss, significant trauma, and poor prognostic. Although multidisciplinary strategies for HCC treatment have been highly recommended by the clinical guidelines, there was limited choice of materials and treatments. Herein, we reported an in situ formed magnetic hydrogel with promising bioapplicable thermal-responsiveness, strong adhesion in wet conditions, high magnetic hyperthermia, and biocompatibility, leading to efficient HCC multidisciplinary treatment including postoperative treatment and transarterial embolization therapy. In vivo results indicated that this hydrogel could reduce the postoperative recurrence rate. The hemostatic ability of the thermal-responsive hydrogel was further demonstrated in both the liver scratch model and liver tumor resection. Computed tomography imaging suggested that the hydrogel could completely embolize the arterial vessels of rabbit liver tumor by vascular intervention operation, which could serve as multidisciplinary responsive materials to external magnetic field and body temperature for HCC treatment.

Hydrogel loading 2D montmorillonite exfoliated by anti-inflammatory Lycium barbarum L. polysaccharides for advanced wound dressing

Designing wound dressing materials with hemocompatibility, suitable mechanical properties, outstanding hemostatic effects and anti-inflammatory activity is of great practical significance for wound management. Herein, a hemostatic hydrogel loaded with Lycium barbarum L. polysaccharide (LBP)-functionalized ultrathin MMT nanosheets (L-MMT NSs) was fabricated for efficient hemostasis and wound healing. Loading the L-MMT NSs into polyvinyl alcohol (PVA), the obtained P-L-MMT hydrogel exhibited a 3D porous structure with good swelling properties, cytocompatibility, hemocompatibility, and anti-inflammatory activity. Importantly, in vivo investigations demonstrated that the P-L-MMT hydrogel exerts outstanding hemostasis activity in the hemorrhaging mouse liver model and reduces tissue damage caused by inflammation to shorten wound healing time. Altogether, the convenient exfoliation and functionalization of bulk MMT using LBPs make this inexpensive and rising nanostructure more attractive in the application of nanomedicine. Moreover, due to the synergy between hemostasis and anti-inflammation, this newly developed multifunctional P-L-MMT hydrogel represents a promising material in biomedical fields.

The improvement of biocompatibility by incorporating porphyrins into carbon dots with photodynamic effects and pH sensitivities

Photodynamic therapy (PDT) is a promising new treatment for cancer; however, the hydrophobic interactions and poor solubility in water of photosensitizers limit the use in clinic. Nanoparticles especially carbon dots have attracted the attention of the world^'s scientists because of their unique properties such as good solubility and biocompatibility. In this paper, we integrated carbon dots with different porphyrins to improve the properties of porphyrins and evaluated their efficacy as PDT drugs. The spectroscopic characteristics of porphyrins nano-conjugates were studied. Singlet oxygen generation rate and the light- and dark-induced toxicity of the conjugates were studied. Our results showed that the covalent interaction between CDs and porphyrins has improved the biocompatibility. The synthesized conjugates also inherit the pH sensitivity of the carbon dots, while the conjugation also decreases the hemolysis ratio making them a promising candidate for PDT. The incorporation of carbon dots into porphyrins improved their biocompatibility by reducing toxicity.

Highly resilient, biocompatible, and antibacterial carbon nanotube/hydroxybutyl chitosan sponge dressing for rapid and effective hemostasis

Uncontrolled hemorrhage is the leading cause of trauma death. The development of safe and efficient hemostatic agents that can rapidly and effectively control bleeding is of great significance to rescue the injured. However, the mechanical, absorptive, and antibacterial properties of conventional two-dimensional hemostatic agents are not satisfactory. Herein, a series of effective three-dimensional hemostatic dressings (JWCNT/HBC sponges) are developed by chemical modification of joint-welded carbon nanotube (JWCNT) sponges with hydroxybutyl chitosan (HBC) for hemorrhage hemostasis. The JWCNT/HBC sponges exhibit high elasticity, porous structure, and suitable blood-absorption and blood-maintaining performance. Moreover, the introduction of HBC endows the JWCNT/HBC sponges with favorable blood compatibility and good antibacterial activity. The sponge treated with 0.5% HBC (JWCNT/0.5%HBC sponge) displays better antiseptic capability, faster blood clotting ability in vitro and shorter hemostasis time in vivo than the commercial gelatin sponge. The JWCNT/HBC sponges combine the advantages of JWCNT sponges and HBC in the adhesion and activation of platelets and red blood cells, thus becoming a good medical material for trauma hemostasis.

Poly(N-vinyl imidazole) Cross-Linked β-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked β-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 μL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

Recent advances in materials for hemostatic management

Traumatic hemorrhage can be a fatal event, particularly when large quantities of blood are lost in a short period of time. Therefore, hemostasis has become a crucial part of emergency treatment. For small wounds, hemostasis can be achieved intrinsically depending on the body's own blood coagulation mechanism; however, for large-area wounds, particularly battlefield and complex wounds, materials delivering rapid and effective hemostasis are required. In parallel with the constant progress in science, technology, and society, advances in hemostatic materials have also undergone various iterations by integrating new ideas with old concepts. There are various natural and synthetic hemostatic materials, including hemostatic powders, adhesives, hydrogels, and tourniquets, for the treatment of severe external trauma. This review covers the differences among the currently available hemostatic materials and comprehensively describes the hemostatic effects of different materials based on the underlying mechanisms. Finally, solutions for current issues related to trauma bleeding are discussed, and the prospects of hemostatic materials are proposed.

Multi-Scale Photoacoustic Assessment of Wound Healing Using Chitosan-Graphene Oxide Hemostatic Sponge

Hemostasis is vital to save lives, reducing risks of organ failure and hemorrhagic shock. Exploring novel hemostatic materials and precise monitoring of the hemostatic status is of great importance for efficient hemostasis. We present the development of chitosan-graphene oxide-based hemostatic composite and multi-scale photoacoustic evaluation of the hemostatic performance. The hemostatic sponge can quickly and efficiently absorb the blood with its porous cavity and specific surficial property. We inspect the hemostatic performance via an in vitro blood absorption test and in vivo mouse bleeding injury experiments. Results show that the synthesized hemostatic sponge can not only absorb plasma in blood fast with its interior porous structure but also stimulate the interfacial reaction with erythrocytes and platelets. The superiority of multi-scale photoacoustic imaging for guiding, monitoring, and evaluating the hemostatic stages of sponges is demonstrated with high spatial resolution and great sensitivity at depths. Photoacoustic evaluation of a chitosan-graphene oxide-based hemostatic sponge has the potential to be transferred toward the clinical assessment of wound healing.

Fabrication of thrombin loaded TEMPO-oxidized cellulose nanofiber-gelatin sponges and their hemostatic behavior in rat liver hemorrhage model

Excessive blood loss due to trauma or major surgical intervention can be life threatening which necessitates rapid hemorrhage management for the prevention of such bleeding related sufferings. Broad interest in developing new hemostatic technologies have been paid for bleeding control but none of them found completely satisfactory especially in terms of rapid clotting, absorbability, porosity, cost effectiveness and safety. To address these issues, a combination of active and passive hemostatic materials from biological sources could be a wise choice. Therefore, plant-derived TEMPO-oxidized nanocellulose (TOCN)/biopolymer gelatin (G) sponge was successfully prepared in co-operation with intrinsic blood coagulation enzyme thrombin (Th) via freeze drying method and their application as rapid hemostatic dressing was investigated. Morphological and in vitro characteristics of the samples were evaluated where uniformity, porosity, swelling, degradation behavior had direct relationship with the percent gelatin incorporation. In vitro hemocompatibility and cyto-compatibility of these sponges were confirmed as well. Among the samples, TOCN 2.5G-Th sponge exhibited excellent hemostatic effect, rapid absorbability, minimum clotting time (1.37 ± 0.152 min) and reduction of blood loss was ensured through rat liver punch biopsy model. The results demonstrated that, Th enhanced blood coagulation, platelet and red blood cell aggregation following application of biopolymer TOCN 2.5G-Th sponge compared with samples devoid of Th. In short, the functional, cost effective and nontoxic sponge developed via facile preparation could potentially be used as an absorbable biomaterial to achieve immediate hemostasis. HighlightsPlant-derived TEMPO-oxidized nanocellulose (TOCN) and biopolymer gelatin (G) was successfully used to prepare a hemostatic sponge in combination with intrinsic blood coagulation enzyme thrombin (Th).The TG sponge combines the advantages of TOCN and gelatin, exhibiting biocompatibility, biodegradability and superior blood-absorption performance.The TOCN 2.5G-Th sponge improves plasma absorption, red blood cell adhesion, aggregation, platelet adhesion and activation leading to enhanced hemostasis effect and shorter hemostasis time in vitro and in vivo.

Conjugate Electrospun 3D Gelatin Nanofiber Sponge for Rapid Hemostasis

Developing an excellent hemostatic material with good biocompatibility and high blood absorption capacity for rapid hemostasis of deep non-compressible hemorrhage remains a significant challenge. Herein, a novel conjugate electrospinning strategy to prepare an ultralight 3D gelatin sponge consisting of continuous interconnected nanofibers. This unique fluffy nanofiber structure endows the sponge with low density, high surface area, compressibility, and ultrastrong liquid absorption capacity. In vitro assessments show the gelatin nanofiber sponge has good cytocompatibility, high cell permeability, and low hemolysis ratio. The rat subcutaneous implantation studies demonstrate good biocompatibility and biodegradability of gelatin nanofiber sponge. Gelatin nanofiber sponge aggregates and activates platelets in large quantities to accelerate the formation of platelet embolism, and simultaneously escalates other extrinsic and intrinsic coagulation pathways, which collectively contribute to its superior hemostatic capacity. In vivo studies on an ear artery injury model and a liver trauma model of rabbits demonstrate that the gelatin nanofiber sponge rapidly induce stable blood clots with least blood loss compared to gelatin nanofiber membrane, medical gauze, and commercial gelatin hemostatic sponge. Hence, the gelatin nanofiber sponge holds great potential as an absorbable hemostatic agent for rapid hemostasis.