Small Addition of Boron in Palladium Catalyst, Big Improvement in Fuel Cell's Performance: What May Interfacial Spectroelectrochemistry Tell?

Lattice engineering of noble metal-based nanomaterials via metal-nonmetal interactions for catalytic applications

Noble metal-based nanomaterials possess outstanding catalytic properties in various chemical reactions. However, the increasing cost of noble metals severely hinders their large-scale applications. A cost-effective strategy is incorporating noble metals with light nonmetal elements (e.g., H, B, C, N, P and S) to form noble metal-based nanocompounds, which can not only reduce the noble metal content, but also promote their catalytic performances by tuning their crystal lattices and introducing additional active sites. In this review, we present a concise overview of the recent advancements in the preparation and application of various kinds of noble metal-light nonmetal binary nanocompounds. Besides introducing synthetic strategies, we focus on the effects of introducing light nonmetal elements on the lattice structures of noble metals and highlight notable progress in the lattice strain engineering of representative core-shell nanostructures derived from these nanocompounds. In the meantime, the catalytic applications of the light element-incorporated noble metal-based nanomaterials are discussed. Finally, we discuss current challenges and future perspectives in the development of noble metal-nonmetal based nanomaterials.

Recent advances in zinc-air batteries: self-standing inorganic nanoporous metal films as air cathodes

Zinc-air batteries (ZABs) have promising prospects as next-generation electrochemical energy systems due to their high safety, high power density, environmental friendliness, and low cost. However, the air cathodes used in ZABs still face many challenges, such as the low catalytic activity and poor stability of carbon-based materials at high current density/voltage. To achieve high activity and stability of rechargeable ZABs, chemically and electrochemically stable air cathodes with bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) activity, fast reaction rate with low platinum group metal (PGM) loading or PGM-free materials are required, which are difficult to achieve with common electrocatalysts. Meanwhile, inorganic nanoporous metal films (INMFs) have many advantages as self-standing air cathodes, such as high activity and stability for both the ORR/OER under highly alkaline conditions. The high surface area, three-dimensional channels, and porous structure with controllable crystal growth facet/direction make INMFs an ideal candidate as air cathodes for ZABs. In this review, we first revisit some critical descriptors to assess the performance of ZABs, and recommend the standard test and reported manner. We then summarize the recent progress of low-Pt, low-Pd, and PGM-free-based materials as air cathodes with low/non-PGM loading for rechargeable ZABs. The structure-composition-performance relationship between INMFs and ZABs is discussed in-depth. Finally, we provide our perspectives on the further development of INMFs towards rechargeable ZABs, as well as current issues that need to be addressed. This work will not only attract researchers' attention and guide them to assess and report the performance of ZABs more accurately, but also stimulate more innovative strategies to drive the practical application of INMFS for ZABs and other energy-related technologies.

Interface synergism and engineering of Pd/Co@N-C for direct ethanol fuel cells

Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials' physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm-2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.

Modification of Pd Nanoparticles with Lower Work Function Elements for Enhanced Formic Acid Dehydrogenation and Trichloroethylene Dechlorination

Catalytic degradation of halogenated contaminants by palladium (Pd) is a promising technology for environmental remediation. However, the low utilization of H by Pd catalyst and its easy poisoning prevent its applications. Here, low work function elements (B or Ag) were incorporated into Fe@C-supported Pd nanoparticles (NPs) to alter their crystalline structure and induce electronic effects, addressing these issues. The Pd mass-normalized dechlorination rates of trichloroethylene (TCE) by Fe@C-Pd-B and Fe@C-Pd-Ag were 51 and 59 times higher than that of unmodified Fe@C-Pd, respectively. The H utilization efficiency of Fe@C-Pd-B and Fe@C-Pd-Ag was 5.4 and 7.2 times higher than that of unmodified Fe@C-Pd, respectively. Various characterizations suggest that the B or Ag incorporation induced the charge redistribution and elevated the electron density of Pd atoms, resulting in the enhanced formic acid (FA) dehydrogenation and TCE dechlorination. Although the Ag incorporation presented a relatively higher H utilization due to the suppressed combination of H and accumulation of unsaturated hydrocarbons (i.e., C₂H₄), the Fe@C-Pd-Ag was easily deactivated. In contrast, the B incorporation enabled the Pd NPs with a good stability. These findings can guide the rational design of robust Pd-based catalysts for efficient and selective FA dehydrogenation and chlorinated contaminant degradation.

d-sp orbital hybridization: a strategy for activity improvement of transition metal catalysts

Orbital hybridization to regulate the electronic structures and surface chemisorption properties of transition metals has been extensively investigated for searching high-performance catalysts toward various reactions. Unlike conventional d-d hybridization, the d-sp hybridization interaction between transition metals and p-block elements could result in surprising electronic properties and catalytic activities. This feature article highlights the recent progress in the development of high-performance transition metal-based catalysts through the extraordinary d-sp hybridization strategy, particularly for energy-related electrocatalytic applications. We start by giving an introduction of fundamental concepts associated with electronic structures of transition metal catalysts, including the Sabatier principle, d-band theory, electronic descriptor, as well as the comparison of d-d hybridization and d-sp hybridization strategies. Then, we summarize the theoretical and experimental advances in d-sp hybridization catalysts, including p-block element-doped metal catalysts, intermetallic catalysts and supported metal catalysts, with emphasis on the important roles of d-sp hybridization in tuning catalytic performances. Finally, we present existing challenges and future development prospects for the rational design of advanced d-sp hybridization catalysts.

Unraveling the Interfacial Polarization Effect between Pd and Polymeric Carbon Nitride toward Efficient CO2 Electroreduction to CO

The efficient electrochemical conversion of carbon dioxide (CO₂) to carbon monoxide (CO) using renewable energy is an effective route to pursue carbon neutrality. Optimizing the binding energy of CO on palladium (Pd) metal-based materials used in this process is to make sure the timely desorption of CO from their active sites is critical. Tuning the electronic structure of the Pd center is an effective strategy to optimize its catalytic performance. Herein, we rationally design Pd nanoparticles (NPs)/polymeric carbon nitride (CN) (Pd/CN) composite, which alters the electronic structure of Pd by introducing the interfacial polarization effect to accelerate CO desorption and improve CO selectivity of Pd catalyst. The optimized Pd/CN exhibits a CO Faradaic efficiency of 92.7% at -0.9 V versus reversible hydrogen electrode in CO₂-saturated 0.1 M KHCO₃ solution. Experimental investigations and theoretical calculations jointly confirm that the enhanced CO selectivity and stability originate from the electron transfer at the Pd/CN interface, and the weakened *CO adsorption on the palladium hydride surface.

Emerging interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic elements for electrocatalytic applications

Palladium (Pd)-based nanomaterials have been identified as potential candidates for various types of electrocatalytic reaction, but most of them typically exhibit unsatisfactory performances. Recently, extensive theoretical and experimental studies have demonstrated that the interstitial/substitutional modification of Pd-based nanomaterials with nonmetallic atoms (H, B, C, N, P, S) has a significant impact on their electronic structure and thus leads to the rapid development of one kind of promising catalyst for various electrochemical reactions. Considering the remarkable progress in this area, we highlight the most recent progress regarding the innovative synthesis and advanced characterization methods of nonmetallic atom-doped Pd-based nanomaterials and provide insights into their electrochemical applications. What's more, the unique structure- and component-dependent electrochemical performance and the underlying mechanisms are also discussed. Furthermore, a brief conclusion about the recent progress achieved in this field as well as future perspectives and challenges are provided.

Modification of Palladium Nanocrystals with Single Atom Platinum via an Electrochemical Self-Catalysis Strategy for Efficient Formic Acid Electrooxidation

Single atom alloys (SAA) have recently drawn increased attention due to their unique structure, high atomic utilization, and fascinating catalytic performance. However, their controllable synthesis still presents a challenge. This study proposes an electrochemical self-catalysis (ESC) strategy to synthesize Pd@Pt/C SAA catalysts, that is, depositing Pt atoms on Pd nanocrystals through in situ decomposition of sodium formate. The relationship between composition and structure of Pd@Pt/C is distinguished through a combination of electrochemical analysis, sphere-corrected scanning transmission electron microscopy, and X-ray adsorption spectra. That relationship evolved from SAA to a sea-island structure and even a core-shell structure with composition-controllable atomic ratios, highlighting the great diversity and convenience of this method in nanostructure construction. The Pd@Pt/C SAA catalyst showed excellent catalytic activity to formic acid oxidation with a peak current density of 5.2 A/mg^metal, which is about 18.6 times that of the commercial Pd/C. density functional theory calculations revealed that the enhanced activity was due to the "passivation" of Pd sites near the Pt single atoms, which attenuated the adsorption of CO. Based on electrochemical principles, this ESC strategy was also expanded to prepare a series of Pd-based SAA, including Pd-Au, Pd-Ir, and Pd-Bi.

Boosting the anti-poisoning ability of palladium towards electrocatalytic formic acid oxidation via polyphosphide chemistry

In this work, we reported a novel polyphosphide strategy for the synthesis of phosphorus doped Pd (P-Pd) using red phosphorus as the starting material at quasi-ambient conditions. Polyphophide anions, as the key reaction intermediates, served as the reducing agent and phosphorus source to modulate the surface electronic structure of Pd. The P-Pd obtained exhibited topmost CO tolerance and electrocatalytic activity to formic acid oxidation among the state-of-arts reports. The mass activity and turnover frequency of P-Pd reached 4413 mA mg^-1_Pd and 16.04 s^-1 at 0.8 V, which were 23.7 and 6.4 times that of commercial Pd/C respectively. After 1000 repeated cycles, 82% initial activity was reserved. Combined with the electrochemical analysis and the density functional theory calculation, the boosted electrochemical performances can be attributed to the size and electronic effects induced by the P doping, which increase the surface actives sites, inhibit the adsorption of CO and change the reaction pathway to favorable CO₂ route. A full cell was also assembled to demonstrate the practical potential of the P-Pd, which showed a maximum power density of 21.56 mW cm^-2. This polyphophide-based reaction route provides a new strategy for the preparation of efficient and durable phosphorus doped alloys for electrocatalysis.

Regulating the Electron Localization of Metallic Bismuth for Boosting CO2 Electroreduction

Electrochemical reduction of CO2 to formate is economically attractive but improving the reaction selectivity and activity remains challenging. Herein, we introduce boron (B) atoms to modify the local electronic structure of bismuth with positive valence sites for boosting conversion of CO2 into formate with high activity and selectivity in a wide potential window. By combining experimental and computational investigations, our study indicates that B dopant differentiates the proton participations of rate-determining steps in CO2 reduction and in the competing hydrogen evolution. By comparing the experimental observations with the density functional theory, the dominant mechanistic pathway of B promoted formate generation and the B concentration modulated effects on the catalytic property of Bi are unravelled. This comprehensive study offers deep mechanistic insights into the reaction pathway at an atomic and molecular level and provides an effective strategy for the rational design of highly active and selective electrocatalysts for efficient CO2 conversion.

Pt-Free Metal Nanocatalysts for the Oxygen Reduction Reaction Combining Experiment and Theory: An Overview

The design and manufacture of highly efficient nanocatalysts for the oxygen reduction reaction (ORR) is key to achieve the massive use of proton exchange membrane fuel cells. Up to date, Pt nanocatalysts are widely used for the ORR, but they have various disadvantages such as high cost, limited activity and partial stability. Therefore, different strategies have been implemented to eliminate or reduce the use of Pt in the nanocatalysts for the ORR. Among these, Pt-free metal nanocatalysts have received considerable relevance due to their good catalytic activity and slightly lower cost with respect to Pt. Consequently, nowadays, there are outstanding advances in the design of novel Pt-free metal nanocatalysts for the ORR. In this direction, combining experimental findings and theoretical insights is a low-cost methodology—in terms of both computational cost and laboratory resources—for the design of Pt-free metal nanocatalysts for the ORR in acid media. Therefore, coupled experimental and theoretical investigations are revised and discussed in detail in this review article.

Nanostructured Metal Borides for Energy-Related Electrocatalysis: Recent Progress, Challenges, and Perspectives

The discovery of durable, active, and affordable electrocatalysts for energy-related catalytic applications plays a crucial role in the advancement of energy conversion and storage technologies to achieve a sustainable energy future. Transition metal borides (TMBs), with variable compositions and structures, present a number of interesting features including coordinated electronic structures, high conductivity, abundant natural reserves, and configurable physicochemical properties. Therefore, TMBs provide a wide range of opportunities for the development of multifunctional catalysts with high performance and long durability. This review first summarizes the typical structural and electronic features of TMBs. Subsequently, the various synthetic methods used thus far to prepare nanostructured TMBs are listed. Furthermore, advances in emerging TMB-catalyzed reactions (both theoretical and experimental) are highlighted, including the hydrogen evolution reaction, the oxygen evolution reaction, the oxygen reduction reaction, the carbon dioxide reduction reaction, the nitrogen reduction reaction, the methanol oxidation reaction, and the formic acid oxidation reaction. Finally, challenges facing the development of TMB electrocatalysts are discussed, with focus on synthesis and energy-related catalytic applications, and some potential strategies/perspectives are suggested as well, which will profit the design of more efficient TMB materials for application in future energy conversion and storage devices.

Electrochemical coupling halobenzene into biphenyl on a reusable Pd nanoparticle-coated carbon-paper electrode at ambient conditions

Electrochemical homo-coupling halobenzene into biphenyl compounds on the Pd/C surface.

Interstitial and substitutional light elements in transition metals for heterogeneous catalysis

The addition of foreign element dopants to monometallic nanoparticle catalysts is of great importance in industrial applications. Both substitutional and interstitial doping of pure metallic phases can give profound effects such as altering electronic and transport properties, lattice parameters, phase transitions, and consequently various physicochemical properties. For transition metal catalysts, this often leads to changes in catalytic activity and selectivity. This article provides an overview of the recent developments regarding the catalytic properties and characterisation of such systems. In particular, the structure-activity relationship for a number of important chemical reactions is summarised and the future prospects of this area are also explored.

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

Synthesis and Electrocatalytical Application of Hybrid Pd/Metal Oxides/MWCNTs

The performance of Pd electrocatalysts for formic acid electrooxidation was improved by application of metal oxide-multiwall carbon nanotubes composites as a catalyst support. Hybrid oxides/MWCNTs were synthesized by two different methods: chemical reduction method and impregnation method. Pd based catalysts were synthesized by polyol method on the MWCNTs or oxide/MWCNTs composites. The In2O3 was deposited on MWCNTs by impregnation method (In2O3/MWCNTs-IM support) and in the presence of NaBH4 (In2O3/MWCNTs-NaBH4 support). The physical properties of the Pd/In2O3/MWCNTs-IM, Pd/In2O3/MWCNTs-NaBH4, Pd/SnO2/MWCNTs, and Pd/MWCNTs catalysts were characterized and their electrocatalytical performance in formic acid oxidation was compared. During Pd deposition on In2O3/MWCNTs-NaBH4 support, InPd2 structure was formed as observed by XRD. The electrochemical tests indicate that the two Pd/ In2O3/MWCNTs electrocatalysts have higher electrocatalytic activity than those of Pd/SnO2/MWCNTs and Pd/MWCNTs. The best performance was observed for the catalyst obtained by In2O3 impregnation of MWCNTs denoted by Pd/In2O3/MWCNTs-IM.

Surfactant-Free Synthesis of Carbon-Supported Palladium Nanoparticles and Size-Dependent Hydrogen Production from Formic Acid-Formate Solution

Steerable hydrogen generation from the hydrogen storage chemical formic acid via heterogeneous catalysis has attracted considerable interest given the safety and efficiency concerns in handling H₂. Herein, a series of carbon-supported capping-agent-free Pd nanoparticles (NPs) with mean sizes tunable from 2.0 to 5.2 nm are developed due to the demand for more efficient dehydrogenation from a formic acid-formate solution of pH 3.5 at room temperature. The trick for the facile size-controlled synthesis of Pd/C catalysts is the selective addition of Na₂CO₃, NH₃·H₂O, or NaOH to a Pd(II) solution to attain initial pH values of 7-9.5. For comparison, cuboctahedron modeling and electrochemical CO_ads stripping methods are applied to evaluate active surface Pd sites for turnover frequency (TOF) calculation. Both mass activity and specific activity (TOF) of hydrogen production are not only time-dependent but also Pd-size-dependent. An initial H₂ production rate of 246 L·h^-1·g_Pd^-1 is achieved on 2.0 nm Pd/C at 303 K, together with a TOF of 1815 h^-1 on the basis of cuboctahedron modeling of surface-active Pd sites. The initial TOF exhibits a significant rise from 3.5 down to 2.8 nm and then levels off below 2.8 nm and even shows a maxima at ca. 2.2 nm using the electrochemical surface area for calculation. The volcano-shaped dependence of TOF on Pd NP size may be better attributed to the changing ratios of terrace sites to defect sites on Pd NPs.

Discovery of Hexagonal Structured Pd-B Nanocrystals

We report on hexagonal close-packed (hcp) palladium (Pd)-boron (B) nanocrystals (NCs) by heavy B doping into face-centered cubic (fcc) Pd NCs. Scanning transmission electron microscopy-electron energy loss spectroscopy and synchrotron powder X-ray diffraction measurements demonstrated that the B atoms are homogeneously distributed inside the hcp Pd lattice. The large paramagnetic susceptibility of Pd is significantly suppressed in Pd-B NCs in good agreement with the reduction of density of states at Fermi energy suggested by X-ray absorption near-edge structure and theoretical calculations.

Highly dispersed palladium nanoparticles on poly(N1,N3-dimethylbenzimidazolium)iodide-functionalized multiwalled carbon nanotubes for ethanol oxidation in alkaline solution

Multi-walled carbon nanotubes (MWCNTs) have been considered as good catalyst supporting materials, and their dispersion and functionalization are important, challenging problems for high-performance composite catalysts.

An Ni–P/C electro-catalyst with improved activity for the carbohydrazide oxidation reaction

Ni–P/C NPs were prepared through a two-step liquid phase reduction method, which exhibited a significant enhancement for the electro-catalytic activity towards the carbohydrazide oxidation reaction compared with Ni/C NPs.