Ionic Compatibilization of Cellulose Nanocrystals with Quaternary Ammonium Salt and Their Melt Extrusion with Polypropylene

Sulfonated cellulose nanocrystal modified with ammonium salt as reinforcement in poly(lactic acid) composite films

Poly(lactic acid) (PLA) composites reinforced with cellulose nanocrystals (CNCs) are promising biodegradable materials. However, the poor compatibility and dispersion of CNCs in the PLA matrix remain a significant obstacle to improving the properties of composites. In this study, the modified CNC (CNC-D) was prepared through sulfonation treatment, followed by modification with didecyl dimethyl ammonium chloride (DDAC). Then, CNC-D was mixed with PLA to prepare composite films (PLA-CNC-D). The results revealed that the PLA-CNC-D had higher tensile strength and elongation at break than PLA-CNC at 3 wt% nanofiller content, increasing by 41.53 and 22.18 %, respectively. SEM and DSC analysis indicated that surface modification improved the compatibility and dispersion of CNC-D in the PLA matrix. The sulfonation process increased the anion content on the surface of CNC-D, enabling the CNC-D surface to adsorb more cationic DDAC, consequently sharply reducing the hydrophilicity of CNC-D. Moreover, the PLA-CNC-D exhibited excellent antibacterial activity against S. aureus and E. coli. In summary, this study provides a novel CNC modification approach to enhance the physical properties and antibacterial activity of PLA composite films, enlarging the application of degradable PLA composites.

Nano Boron Oxide and Zinc Oxide Doped Lignin Containing Cellulose Nanocrystals Improve the Thermal, Mechanical and Flammability Properties of High-Density Poly(ethylene)

The widely used high-density polyethylene (HDPE) polymer has inadequate mechanical and thermal properties for structural applications. To overcome this challenge, nano zinc oxide (ZnO) and nano boron oxide (B2O3) doped lignin-containing cellulose nanocrystals (L-CNC) were blended in the polymer matrix. The working hypothesis is that lignin will prevent CNC aggregation, and metal oxides will reduce the flammability of polymers by modifying their degradation pathways. This research prepared and incorporated safe, effective, and eco-friendly hybrid systems of nano ZnO/L-CNC and nano B2O3/L-CNC into the HDPE matrix to improve their physio-mechanical and fire-retardant properties. The composites were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis, thermo-gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, horizontal burning test, and microcalorimetry test. The results demonstrated a substantial increase in mechanical properties and a reduction in flammability. The scanning electron microscope (SEM) images showed some agglomeration and irregular distribution of the inorganic oxides.

The Colloidal Properties of Nanocellulose

Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.

Recent Advances in Chemically Modified Cellulose and Its Derivatives for Food Packaging Applications: A Review

The application of cellulose in the food packaging field has gained increasing attention in recent years, driven by the desire for sustainable products. Cellulose can replace petroleum-based plastics because it can be converted to biodegradable and nontoxic polymers from sustainable natural resources. These products have increasingly been used as coatings, self-standing films, and paperboards in food packaging, owing to their promising mechanical and barrier properties. However, their utilization is limited because of the high hydrophilicity of cellulose. With the presence of a large quantity of functionalities within pristine cellulose and its derivatives, these building blocks provide a unique platform for chemical modification via covalent functionalization to introduce stable and permanent functionalities to cellulose. A primary aim of chemical attachment is to reduce the probability of component leaching in wet and softened conditions and to improve the aqueous, oil, water vapor, and oxygen barriers, thereby extending its specific use in the food packaging field. However, chemical modification may affect the desirable mechanical, thermal stabilities and biodegradability exhibited by pristine cellulose. This review exhaustively reports the research progress on cellulose chemical modification techniques and prospective applications of chemically modified cellulose for use in food packaging, including active packaging.

Preparation, Characterization, and Surface Modification of Cellulose Nanocrystal from Lignocellulosic Biomass for Immobilized Lipase

This study reports the synthesis of cellulose nanocrystal (CNC) from sugarcane bagasse and rice straw as the matrix for immobilized lipase enzyme. The CNC surface was modified using cetyltrimethylammonium bromide (CTAB) to improve the interaction of CNC with glutaraldehyde so that CNC can immobilize lipase effectively. The results showed that after surface modification of CNC using CTAB with concentrations of 2–10 mM, the crystallinity of CNC slightly decreased. The presence of immobilized lipase on the modified CNC was confirmed visibly by the appearance of dark spots using transmission electron microscopy (TEM). The bond formed between the enzyme and CNC was approved using Fourier transform infrared spectroscopy (FTIR). FTIR results show a new amine group peak in the immobilized lipase, which is not present in the modified CNC itself. The modified CNC, both from bagasse (SB-20 A1-1) and rice straw (RS-20 B1-1), was successfully applied to the immobilized lipase enzyme with a yield of 88%. The observed free enzyme activity was 3.69 µmol/min∙mL. The degree of hydrolysis of canola oil relative to free lipase (100%) from immobilized lipase at lipase SB-20 A1-1 and lipase RS-20 A1-1 was 23% and 30%, respectively. Therefore, this study successfully immobilized lipase and applied it to the hydrolysis of triglycerides.

Nanocomposites Assembled via Electrostatic Interactions between Cellulose Nanocrystals and a Cationic Polymer

On account of their high strength and stiffness and their renewable nature, cellulose nanocrystals (CNCs) are widely used as a reinforcing component in polymer nanocomposites. However, CNCs are prone to aggregation and this limits the attainable reinforcement. Here, we show that nanocomposites with a very high CNC content can be prepared by combining the cationic polymer poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) and negatively charged, carboxylated CNCs that are provided as a sodium salt (CNC-COONa). Free-standing films of the composites can be prepared by simple solvent casting from water. The appearance and polarized optical microscopy and electron microscopy images of these films suggest that CNC aggregation is absent, and this is supported by the very pronounced reinforcement observed. The incorporation of 33 wt % CNC-COONa into PMETAC allowed increasing the storage modulus of this already rather stiff, glassy amorphous matrix polymer from 1.5 ± 0.3 to 6.6 ± 0.1 GPa, while the maximum strength increased from 11 to 32 MPa. At this high CNC content, the reinforcement achieved in the PMETAC/CNC-COONa nanocomposite is much more pronounced than that observed for a reference nanocomposite made with unmodified CNCs (CNC-OH).

Cellulose-Silver Composites Materials: Preparation and Applications

Cellulose has received great attention owing to its distinctive structural features, exciting physico-chemical properties, and varied applications. The combination of cellulose and silver nanoparticles currently allows to fabricate different promising functional nanocomposites with unique properties. The current work offers a wide and accurate overview of the preparation methods of cellulose-silver nanocomposite materials, also providing a punctual discussion of their potential applications in different fields (i.e., wound dressing, high-performance textiles, electronics, catalysis, sensing, antimicrobial filtering, and packaging). In particular, different preparation methods of cellulose/silver nanocomposites based on in situ thermal reduction, blending and dip-coating, or additive manufacturing techniques were thoroughly described. Hence, the correlations among the structure and physico-chemical properties in cellulose/silver nanocomposites were investigated in order to better control the final properties of the nanocomposites and analyze the key points and limitations of the current manufacturing approaches.

3D Printing of Thermal Insulating Polyimide/Cellulose Nanocrystal Composite Aerogels with Low Dimensional Shrinkage

Polyimide (PI)-based aerogels have been widely applied to aviation, automobiles, and thermal insulation because of their high porosity, low density, and excellent thermal insulating ability. However, the fabrication of PI aerogels is still restricted to the traditional molding process, and it is often challenging to prepare high-performance PI aerogels with complex 3D structures. Interestingly, renewable nanomaterials such as cellulose nanocrystals (CNCs) may provide a unique approach for 3D printing, mechanical reinforcement, and shape fidelity of the PI aerogels. Herein, we proposed a facile water-based 3D printable ink with sustainable nanofillers, cellulose nanocrystals (CNCs). Polyamic acid was first mixed with triethylamine to form an aqueous solution of polyamic acid ammonium salts (PAAS). CNCs were then dispersed in the aqueous PAAS solution to form a reversible physical network for direct ink writing (DIW). Further freeze-drying and thermal imidization produced porous PI/CNC composite aerogels with increased mechanical strength. The concentration of CNCs needed for DIW was reduced in the presence of PAAS, potentially because of the depletion effect of the polymer solution. Further analysis suggested that the physical network of CNCs lowered the shrinkage of aerogels during preparation and improved the shape-fidelity of the PI/CNC composite aerogels. In addition, the composite aerogels retained low thermal conductivity and may be used as heat management materials. Overall, our approach successfully utilized CNCs as rheological modifiers and reinforcement to 3D print strong PI/CNC composite aerogels for advanced thermal regulation.

A multimodal antimicrobial platform based on MXene for treatment of wound infection

Featured with a three-dimensional network structure, electrostatic spinning nanofibrous membranes can maintain the hygroscopic balance in the wound place and promote the wound healing, thus have been extensively studied as a promising wound healing dressing. In this study, amoxicillin (AMX), MXene, and polyvinyl alcohol (PVA) were mixed and electrospun into an antibacterial nanofibrous membrane (MXene-AMX-PVA nanofibrous membrane). In the composite nanofibrous membrane, the PVA matrix could control the release of AMX to combat bacterial infection, while the MXene could transform the near-infrared laser into heat, leading to local hyperthermia to promote the AMX release. Meanwhile, the local hyperthermia could also destroy the noncellular components of bacteria and synergistically cause the bacterial inactivation. The bacteriostatic activity and wound healing ability of the composite nanofibrous membrane were systematically verified on the S. aureus in vitro and the S. aureus-infected mouse skin defect model in vivo. This membrane not only functioned as a physical barrier to co-load the AMX and MXene, but also exhibited the high antibacterial and accelerated wound healing capacity, which will advance the design of novel wound healing dressings and antibacterial strategies.

Recent Developments in Cellulose Nanomaterial Composites

Cellulose nanomaterials (CNMs) are a class of materials that have recently garnered attention in fields as varied as structural materials, biomaterials, rheology modifiers, construction, paper enhancement, and others. As the principal structural reinforcement of biomass giving wood its mechanical properties, CNM is strong and stiff, but also nontoxic, biodegradable, and sustainable with a very large (Gton yr^-1 ) source. Unfortunately, due to the relatively young nature of the field and inherent incompatibility of CNM with most man-made materials in use today, research has tended to be more basic-science oriented rather than commercially applicable, so there are few CNM-enabled products on the market today. Herein, efforts are presented for preparing and forming cellulose nanomaterial nanocomposites. The focus is on recent efforts attempting to mitigate common impediments to practical commercialization but is also placed in context with traditional efforts. The work is presented in terms of the progress made, and still to be made, on solving the most pressing challenges-getting properties that are competitive with currently used materials, removing organic solvent, solving the inherent incompatibility between CNM and polymers of interest, and incorporation into commonly used industrial processing techniques.

Biodegradation of Hemicellulose-Cellulose-Starch-Based Bioplastics and Microbial Polyesters

The volume of discarded solid wastes, especially plastic, which accumulates in large quantities in different environments, has substantially increased. Population growth and the consumption pattern of societies associated with unsustainable production routes have caused the pollution level to increase. Therefore, the development of materials that help mitigate the impacts of plastics is fundamental. However, bioplastics can result in a misunderstanding about their properties and environmental impacts, as well as incorrect management of their final disposition, from misidentifications and classifications. This chapter addresses the aspects and factors surrounding the biodegradation of bioplastics from natural (plant biomass (starch, lignin, cellulose, hemicellulose, and starch) and bacterial polyester polymers. Therefore, the biodegradation of bioplastics is a factor that must be studied, because due to the increase in the production of different bioplastics, they may present differences in the decomposition rates.

Anticoagulant Activity of Cellulose Nanocrystals from Isora Plant Fibers Assembled on Cellulose and SiO2 Substrates via a Layer-by-Layer Approach

In this study, we report the isolation of cellulose nanocrystals (CNCs) from Isora plant fibers by sulfuric acid hydrolysis and their assembly on hydrophilic cellulose and silicon-di-oxide (SiO₂) surfaces via a layer-by-layer (LBL) deposition method. The isolated CNCs were monodispersed and exhibited a length of 200–300 nm and a diameter of 10–20 nm, a negative zetapotential (−34–39 mV) over a wide pH range, and high stability in water at various concentrations. The multi-layered structure, adsorbed mass, conformational changes, and anticoagulant activity of sequentially deposited anionic (sulfated) CNCs and cationic polyethyleneimine (PEI) on the surfaces of cellulose and SiO₂ by LBL deposition were investigated using a quartz crystal microbalance technique. The organization and surface features (i.e., morphology, thickness, wettability) of CNCs adsorbed on the surfaces of PEI deposited at different ionic strengths (50–300 mM) of sodium chloride were analysed in detail by profilometry layer-thickness, atomic force microscopy and contact angle measurements. Compared to cellulose (control sample), the total coagulation time and plasma deposition were increased and decreased, respectively, for multilayers of PEI/CNCs. This study should provide new possibilities to fabricate and tailor the physicochemical properties of multilayer films from polysaccharide-based nanocrystals for various biomedical applications.

Sustainable pathway towards large scale melt processing of the new generation of renewable cellulose-polyamide composites

Modern society's growing demands for accountable high-performance and more environmentally friendly materials is leading to increased interest and fast development of sustainable polymeric composite materials. New generations of "greener" products originating from renewable resources fulfil emerging requirements of low environmental and health & safety impacts and contribute to diminishing global dependence on fossil feedstock. The preparation of sustainable polymeric composites via reliable and reproducible melt-compounding methods is still challenging but has the potential to yield applicable and market competitive products. This literature survey reviews the current state of research involving the use of cellulosic materials, as bio-sourced and sustainable reinforcement in melt-processed polyamides and focuses on the main hurdles that prevent their successful large-scale melt-compounding. Particular emphasis is dedicated to emerging bio-sourced polyamides fitting the performance of engineering materials and at the same time offering additional interesting properties for advanced applications such as piezoelectricity for transducers, sensors, actuators and energy harvesters.

Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources

Researchers have recently focused on the advancement of new materials from biorenewable and sustainable sources because of great concerns about the environment, waste accumulation and destruction, and the inevitable depletion of fossil resources. Biorenewable materials have been extensively used as a matrix or reinforcement in many applications. In the development of innovative methods and materials, composites offer important advantages because of their excellent properties such as ease of fabrication, higher mechanical properties, high thermal stability, and many more. Especially, nanocomposites (obtained by using biorenewable sources) have significant advantages when compared to conventional composites. Nanocomposites have been utilized in many applications including food, biomedical, electroanalysis, energy storage, wastewater treatment, automotive, etc. This comprehensive review provides chemistry, structures, advanced applications, and recent developments about nanocomposites obtained from biorenewable sources.

Adsorption of xyloglucan and cellulose nanocrystals on natural fibres for the creation of hierarchically structured fibres

Green treatment of natural fibres is a major issue in paper, textile and biocomposites industries to design innovative and eco-friendly products. In this work, hierarchical structuring of flax woven fabrics by the adsorption of xyloglucan (XG) and cellulose nanocrystals (CNC) is studied. Indeed, CNC have high mechanical properties, high specific surface area and great potential for functionalization. The adsorption of XG and CNC has been investigated in terms of localization by confocal and scanning electron microscopy (SEM) and quantification through adsorption isotherms. Adhesion force measurements have also been performed by Atomic Force Microscopy (AFM). XG and CNC are homogeneously adsorbed on flax fabric and adsorption isotherms reach plateau values around 20 mg /g_fibres for both. The pre-adsorption of XG on flax fabric influences the amount of adsorbed CNC in the high concentrations and also creates entanglements and strong interactions between XG and CNC with the formation of an extensible network.

A review on nanocellulose as a lightweight filler of polyolefin composites

Nanocellulose (NC) possesses low density, high aspect ratio, impressive mechanical properties, nanoscale dimensions, which shows huge potential applications as a reinforced filler. Polyolefin (PO), represented by polyethylene (PE) and polypropylene (PP), has been widely used in industries. Recently nanocellulose/polyolefin nanocomposites (NC/PO nanocomposites) have caught more attention from the application of automotive components, aerospace, furniture, building, home appliances, and sport. In this review, the surface modifications of nanocellulose and polyolefin are summarized respectively, such as surface adsorption modification, small molecule modification, and graft copolymerization modification. The common preparations of NC/PO nanocomposites are discussed, including the melting compounding, the solvent casting, and the in-situ polymerization. The lightweight, mechanical properties, and aging-resistant properties of NC/PO nanocomposites are highlighted. Finally, the potentials and challenges for industrial production development of NC/PO nanocomposites are discussed.

Rediscovery of nylon upgraded by interactive biorenewable nano-fillers

Inorganic nanomaterials can only stiffen nylon with a significant loss of its toughness and ductility. Furthermore, they are not eco-friendly. In this study, the facile tuning of nylon's mechanical properties from stiff to tough was achieved, using cellulose nanocrystals (CNC) and chitosan nanowhiskers (CSW) as biorenewable fillers. The interaction between the matrix and filler was controlled by varying the types of fillers and the employed processing methods, including in situ interfacial polymerization and post-solution blending. Particularly with CSW, the in situ-incorporated filler with a 0.4 wt% loading strengthened nylon and led to a 1.9-fold increase in its Young's modulus (2.6 GPa) and a 1.7-fold increase in its ultimate tensile strength (106 MPa), whereas the solution-blended filler with a 0.3 wt% loading toughened the polymer with a 2.1-fold increase (104 MJ m^-3). Compared with inorganic nanocomposites, these interactive biofiller-nanocomposites are unrivaled in their reinforcing performance when normalized by filler content. This stiff-to-tough tuning trend is more pronounced in the CSW system than in the CNC system. Covalent polymer grafts on the amine surface of CSW enhanced interfacial interactions in the in situ method, whereas its cationic surface charges plasticized the polymer matrix in the blending method. This proteinaceous composite-mimicking all-organic nylon nanocomposite opens new possibilities in the field of reinforced engineering plastics.

Cellulose modified by citric acid reinforced polypropylene resin as fillers

The greatest challenge hindering the use of cellulose as a reinforcing filler in polymeric composites is its poor compatibility due to the inherent hydrophilicity of cellulose and the hydrophobic nature of polymeric matrices. To solve this issue, we demonstrate an effective water-based method to render the cellulose surface with high carboxyl content through the esterification of hydroxyl groups with citric acid in a solid phase reaction without the use of noxious solvents. The modified cellulose was then further hydrophobized by grafting magnesium stearate to the surface. Consequently, the flexural properties of PP composites reinforced by the hydrophobized cellulose fillers were greatly improved compared to those of composites containing hydrophilic cellulose and pure PP resin. The surface modification conditions and filler proportions in composites were optimized. Because of the innocuity and cost-efficiency of citric acid, we believe that citric acid-modified cellulose has immense potential as a sustainable and cost-effective reinforcing filler.

Chemical, Thermo-Mechanical and Antimicrobial Properties of DBD Plasma Treated Disinfectant-Impregnated Wipes during Storage

Disinfectant-impregnated wipes are broadly used in hospitals, as an important approach for infection prevention and control. But their ageing performance has rarely been studied. Untreated and Dielectric Barrier Discharge (DBD) plasma pre-treated wiping materials made of nonwoven 100% polyester (W1), nonwoven 55% cellulose/45% polyester (W2) and woven cotton (W3) were impregnated with a quaternary ammonium compound solution (ADBAC) for 30 min, 3, 7, 15, and 30 days of storage time and characterized in term of chemical, thermo-mechanical and antimicrobial efficacy. X-ray photoelectron spectroscopy analysis on the plasma-treated polyester wipes demonstrates the incorporation of reactive oxygen species on the fiber surface. Laser scanning microscopy demonstrates the plasma etching effect in smoothing the surface of the cotton wipe reducing the adsorption of ADBAC. The result showed no significant changes in breaking force and elongation during storage for W1 and W2. However, plasma treatment affects W3 in weft direction reducing the force at break in water and ADBAC treated wipes. Dynamic mechanical analysis results show that ADBAC and plasma treatment have a significant influence in W1 and W3 viscoelastic properties improving the elastic response limiting the polymeric chains mobility and the non-elastic response due to the etching effect, respectively. Overall, the plasma pre-treatment of ADBAC-impregnated wipes is able to enhance the antimicrobial performance and the storage time of polyester-containing wipes.

Cellulose Nanocrystal Surface Cationization: A New Fungicide with High Activity against Phycomycetes capsici

At present, the management of Phytophthora capsici (P. capsici) mainly relies on chemical pesticides. However, along with the resistance generated by P. capsici to these chemical pesticides, the toxicity and non-degradability of this chemical molecule may also cause serious environmental problems. Herein, a new bio-based nano-antifungal material (CNC@CTAB) was made with coating hexadecyl trimethyl ammonium bromide (CTAB) on the surface of a cellulose nanocrystal (CNC). This material was then applied to the prevention of P. capcisi. This particle was facilely fabricated by mixing CTAB and sulfuric group modified CNC in an aqueous solvent. Compared to pure CTAB, the enrichment of CTAB on the CNC surface showed a better anti-oomycete activity both in vitro and in vivo. When CNC@CTAB was applied on P. capsici in vitro, the inhibition rate reached as high as 100%, while on the pepper leaf, the particle could also efficiently prevent the infection of P. capsici, and achieve a disease index as low as zero Thus, considering the high safety of CNC@CTAB in agricultural applications, and its high anti-oomycete activity against P. capsici, we believe that this CNC@CTAB has great application potential as a new green nano-fungicide in P. capsici management during the production of peppers or other vegetables.

Nanocellulose-based polymer hybrids and their emerging applications in biomedical engineering and water purification

Nanocellulose, derived from cellulose hydrolysis, has unique optical and mechanical properties, high surface area, and good biocompatibility. It is frequently used as a reinforcing agent to improve the native properties of materials. The presence of functional groups in its surface enables the alteration of its behavior and its use under different conditions. Nanocellulose is typically used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). CNCs and CNFs have a high aspect ratio with typical lengths of ∼100-250 nm and 0.1-2 μm, respectively; BNC is nanostructured cellulose produced by bacteria. Nanohybrid materials are a combination of organic or inorganic nanomaterials with macromolecules forming a single composite and typically exhibit superior optical, thermal, and mechanical properties to those of native polymers, owing to the greater interactions between the macromolecule matrix and the nanomaterials. Excellent biocompatibility and biodegradability make nanocellulose an ideal material for applications in biomedicine. Unlike native polymers, nanocellulose-based nanohybrids exhibit a sustained drug release ability, which can be further optimized by changing the content or chemical environment of the nanocellulose, as well as the external stimuli, such as the pH and electric fields. In this review, we describe the process of extraction of nanocellulose from different natural sources; its effects on the structural, morphological, and mechanical properties of polymers; and its various applications.

Cellulose nanocrystal driven microphase separated nanocomposites: Enhanced mechanical performance and nanostructured morphology

The interest in the modification of cellulose nanocrystals (CNCs) lies in the potential to homogenously disperse CNCs in hydrophobic polymer matrices and to promote interfacial adhesion. In this work, poly(methyl methacrylate) (PMMA) and poly(butyl acrylate) (PBA) were grafted onto CNCs, thereby imparting their hydrophobic traits. The successful grafting modification led to the increased thermal stability of modified CNCs (MCNCs), and the hydrophobic surface modification was integrated with crystalline structure and morphology of CNCs. The nanocomposites with 7 wt% MCNCs/PBA-co-PMMA had an increase in Young's modulus of >25-fold and in tensile strength at about 3 times compared to these of neat PBA-co-PMMA copolymer. In addition, a micro-phase separated morphology (PBA soft domains, and PMMA and CNC hard domains) of MCNCs/PBA-co-PMMA nanocomposites was observed. The large increase in the storage moduli (glass transition temperatures) and organized morphology of MCNCs/PBA-co-PMMA nanocomposites also elucidated the relationship between mechanical properties and micro-phase separated morphology. Therefore, the MCNCs are effective reinforcing agents for the PBA-co-PMMA thermoplastic elastomers, opening up opportunities for their wide-spread applications in polymer composites.

Recent Advances in Nanocellulose Composites with Polymers: A Guide for Choosing Partners and How to Incorporate Them

In recent years, the research on nanocellulose composites with polymers has made significant contributions to the development of functional and sustainable materials. This review outlines the chemistry of the interaction between the nanocellulose and the polymer matrix, along with the extent of the reinforcement in their nanocomposites. In order to fabricate well-defined nanocomposites, the type of nanomaterial and the selection of the polymer matrix are always crucial from the viewpoint of polymer⁻filler compatibility for the desired reinforcement and specific application. In this review, recent articles on polymer/nanocellulose composites were taken into account to provide a clear understanding on how to use the surface functionalities of nanocellulose and to choose the polymer matrix in order to produce the nanocomposite. Here, we considered cellulose nanocrystal (CNC) and cellulose nanofiber (CNF) as the nanocellulosic materials. A brief discussion on their synthesis and properties was also incorporated. This review, overall, is a guide to help in designing polymer/nanocellulose composites through the utilization of nanocellulose properties and the selection of functional polymers, paving the way to specific polymer⁻filler interaction.

Cellulose nanomaterials as green nanoreinforcements for polymer nanocomposites

Unexpected and attractive properties can be observed when decreasing the size of a material down to the nanoscale. Cellulose is no exception to the rule. In addition, the highly reactive surface of cellulose resulting from the high density of hydroxyl groups is exacerbated at this scale. Different forms of cellulose nanomaterials, resulting from a top-down deconstruction strategy (cellulose nanocrystals, cellulose nanofibrils) or bottom-up strategy (bacterial cellulose), are potentially useful for a large number of industrial applications. These include the paper and cardboard industry, use as reinforcing filler in polymer nanocomposites, the basis for low-density foams, additives in adhesives and paints, as well as a wide variety of filtration, electronic, food, hygiene, cosmetic and medical products. This paper focuses on the use of cellulose nanomaterials as a filler for the preparation of polymer nanocomposites. Impressive mechanical properties can be obtained for these materials. They obviously depend on the type of nanomaterial used, but the crucial point is the processing technique. The emphasis is on the melt processing of such nanocomposite materials, which has not yet been properly resolved and remains a challenge.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.

A new strategy to elaborate polymer composites via Pickering emulsion polymerization of a wide range of monomers

We report a novel strategy to prepare polymer composites reinforced with cellulose nanocrystals (CNCs) via Pickering emulsion polymerization.

Trans crystallization behavior and strong reinforcement effect of cellulose nanocrystals on reinforced poly(butylene succinate) nanocomposites

Biodegradable poly(butylene succinate) (PBS) nanocomposites are polymerized via in situ polymerization of succinic acid (SA) with cellulose nanocrystal (CNC)-loaded 1,4-butanediol (1,4-BD) mixtures.

Crystalline nanocellulose/lauric arginate complexes

As a novel sustainable nanomaterial, crystalline nanocellulose (CNC) possesses many unique characteristics for emerging applications in coatings, emulsions, paints, pharmaceutical formulations, and other aqueous composite systems where interactions with oppositely charged surfactants are commonly employed. Herein, the binding interactions between sulfated CNC and a novel biologically-derived cationic surfactant lauric arginate (LAE) were comprehensively examined. Ionic strength and solution pH are two crucial factors in determining the adsorption of LAE to the CNC surface. Three different driving forces were identified for CNC-LAE binding interactions. Additionally, it was found that the adsorption of LAE to the CNC surface could notably impact the surface potential, aggregation state, hydrophobicity and thermal stability of the CNC. This work provides insights on the binding interactions between oppositely charged CNC and surfactants, and highlights the significance of optimizing the concentration of surfactant required to ionically decorate CNC for its enhanced dispersion and compatibilization in non-polar polymer matrices.

Preparation of Cellulose Nanocrystal-Reinforced Poly(lactic acid) Nanocomposites through Noncovalent Modification with PLLA-Based Surfactants

Cellulose nanocrystal (CNC)-reinforced poly(lactic acid) (PLA) nanocomposites were prepared by twin-screw extrusion followed by injection-molding using a masterbatch approach. Noncovalent modification of CNCs was performed with two different poly(l-lactide) (PLLA)-based surfactants to improve the filler/matrix compatibility. They both have a PLLA block that is expected to improve the compatibility with the PLA matrix and differ by the polar head. It consists of either a poly(ethylene glycol) (PEG) block (PEG-b-PLLA) or an imidazolium group (Im-PLLA), that is able to interact with the surface of the CNCs. The morphological, structural, thermal, rheological, and mechanical properties of the nanocomposites were investigated. The different modes of interaction of the polar head of the surfactant lead to different properties. However, the global decrease in the molecular weight of PLA, induced by the short PLLA blocks from the surfactants and the possible degradation during melt processing, results in a plasticization effect and impacts the crystallization of the matrix.