High Antimicrobial Activity and Low Human Cell Cytotoxicity of Core-Shell Magnetic Nanoparticles Functionalized with an Antimicrobial Peptide

How can biomaterial-conjugated antimicrobial peptides fight bacteria and be protected from degradation?

The emergence of antibiotic-resistant bacteria is a serious threat to public health. Antimicrobial peptides (AMP) are a powerful alternative to antibiotics due to their low propensity to induce bacterial resistance. However, cytotoxicity and short half-lives have limited their clinical translation. To overcome these problems, AMP conjugation has gained relevance in the biomaterials field. Nevertheless, few studies describe the influence of conjugation on enzymatic protection, mechanism of action and antimicrobial efficacy. This review addresses this gap by providing a detailed comparison between conjugated and soluble AMP. Additionally, commonly employed chemical reactions and factors to consider when promoting AMP conjugation are reviewed. The overall results suggested that AMP conjugated onto biomaterials are specifically protected from degradation by trypsin and/or pepsin. However, sometimes, their antimicrobial efficacy was reduced. Due to limited conformational freedom in conjugated AMP, compared to their soluble forms, they appear to act initially by creating small protuberances on bacterial membranes that may lead to the alteration of membrane potential and/or formation of holes, triggering cell death. Overall, AMP conjugation onto biomaterials is a promising strategy to fight infection, particularly associated to the use of medical devices. Nonetheless, some details need to be addressed before conjugated AMP reach clinical practice. STATEMENT OF SIGNIFICANCE: Covalent conjugation of antimicrobial peptides (AMP) has been one of the most widely used strategies by bioengineers, in an attempt to not only protect AMP from proteolytic degradation, but also to prolong their residence time at the target tissue. However, an explanation for the mode of action of conjugated AMP is still lacking. This review extensively gathers works on AMP conjugation and puts forward a mechanism of action for AMP when conjugated onto biomaterials. The implications of AMP conjugation on antimicrobial activity, cytotoxicity and resistance to proteases are all discussed. A thorough review of commonly employed chemical reactions for this conjugation is also provided. Finally, details that need to be addressed for conjugated AMP to reach clinical practice are discussed.

Conjugation of antimicrobial peptides to enhance therapeutic efficacy

The growing prevalence of antimicrobial resistance (AMR) has brought with it a continual increase in the numbers of deaths from multidrug-resistant (MDR) infections. Since the current arsenal of antibiotics has become increasingly ineffective, there exists an urgent need for discovery and development of novel antimicrobials. Antimicrobial peptides (AMPs) are considered to be a promising class of molecules due to their broad-spectrum activities and low resistance rates compared with other types of antibiotics. Since AMPs also often play major roles in elevating the host immune response, the molecules may also be called "host defense peptides." Despite the great promise of AMPs, the majority remain unsuitable for clinical use due to issues of structural instability, degradation by proteases, and/or toxicity to host cells. Moreover, AMP activities in vivo can be influenced by many factors, such as interaction with blood and serum biomolecules, physiological salt concentrations or different pH values. To overcome these limitations, structural modifications can be made to the AMP. Among several modifications, physical and chemical conjugation of AMP to other biomolecules is widely considered an effective strategy. In this review, we discuss structural modification strategies related to conjugation of AMPs and their possible effects on mode of action. The conjugation of fatty acids, glycans, antibiotics, photosensitizers, polymers, nucleic acids, nanoparticles, and immobilization to biomaterials are highlighted.

Advances in the design of amino acid and peptide synthesized gold nanoparticles for their applications

The field of therapeutics and diagnostics is advanced by nanotechnology-based approaches including the spatial-temporal release of drugs, targeted delivery, enhanced accumulation of drugs, immunomodulation, antimicrobial action, and high-resolution bioimaging, sensors and detection. Various compositions of nanoparticles (NPs) have been developed for biomedical applications; however, gold NPs (Au NPs) have attracted tremendous attention due to their biocompatibility, easy surface functionalization and quantification. Amino acids and peptides have natural biological activities as such, their activities enhance several folds in combination with NPs. Although peptides are extensively used to produce various functionalities of Au NPs, amino acids have also gained similar interests in producing amino acid-capped Au NPs due to the availability of amine, carboxyl and thiol functional groups. Henceforth, a comprehensive review is needed to timely bridge the synthesis and the applications of amino acid and peptide-capped Au NPs. This review aims to describe the synthesis mechanism of Au NPs using amino acids and peptides along with their applications in antimicrobial, bio/chemo-sensors, bioimaging, cancer therapy, catalysis, and skin regeneration. Moreover, the mechanisms of various activities of amino acid and peptide capped-Au NPs are presented. We believe this review will motivate researchers to better understand the interactions and long-term activities of amino acid and peptide-capped Au NPs for their success in various applications.

Nanoparticle-mediated stimulus-responsive antibacterial therapy

The limitations associated with conventional antibacterial therapies and the subsequent amplification of multidrug-resistant (MDR) microorganisms have increased, necessitating the urgent development of innovative antibacterial techniques. Accordingly, nanoparticle-mediated therapeutics have emerged as potential candidates for antibacterial treatment due to their suitable dimensions, penetration capacity, and high efficiency in targeted drug delivery. However, although nanoparticle-based drug delivery systems have been demonstrated to be effective, they are limited by their overuse and unwanted side effects. Thus, to overcome these drawbacks, stimulus-responsive antibiotic delivery has been extended as a promising strategy for site-specific restricted drug exemption. Nano-formulations that are triggered by various stimuli, such as intrinsic, extrinsic, and bacterial stimuli, have been developed. Thus, by harnessing the physicochemical properties of various nanoparticles, the selective release of therapeutic cargoes can be achieved through the application of a variety of local stimuli such as light, sound, irradiation, pH, and magnetic field. In this review, we also highlight the progress and perspectives of stimulus-responsive combination therapy, with special emphasis on the eradication of MDR strains and biofilms. Hence, this review addresses the advancement and challenges in the applications of stimulus-responsive nanoparticles together with the various future prospects of this technique.

Acidic sophorolipid and antimicrobial peptide based formulation as antimicrobial and antibiofilm agents

Antimicrobial peptides (AMPs) are considered promising candidates to treat various infections in soft tissues and skin. However, no effective treatment based on AMPs has been reached to clinics due to their instability in serum and wounds. Biosurfactants such as acidic sophorolipids (ASLs) of very high concentrations (equal or above 5 mg/mL) have been demonstrated to be antimicrobial agents, however these concentrations might induce cytotoxic effects to human cells. Here, we have demonstrated the synergistic antimicrobial effect of ASL nanoparticles (NPs) and LL37 peptides (below their minimum inhibitory concentrations; MICs) to eradicate Gram-positive and Gram-negative bacteria in human serum (HS) and in the presence of trypsin. The formulations containing ASL NPs (500 μg/mL) and LL37 peptides (15-25 μg/mL) effectively kill wide strains of bacteria in 5 % HS and the presence of trypsin. Moreover, the combination of ASL NPs (500 μg/mL) and LL37 peptides (15 μg/mL) prevents the formation of S. aureus biofilm and eradicates the one-day old biofilm. Importantly, the combination of ASL NPs and LL37 peptides severely damages the cell membrane of Escherichia coli (E. coli) as shown by atomic force microscopy (AFM). The combination of ASL NPs and LL37 peptides rapidly damages the outer (OM) and inner membrane (IM) of E. coli, while ASL NPs (1000 μg/mL) alone slowly compromise the integrity of the bacterial membrane. Importantly, the combination of ASL NPs and LL37 peptides is biocompatible to human keratinocyte cells (HaCaTs) and human umbilical vein endothelial cells (HUVECs), and induces the expression of anti-inflammatory cytokine in macrophages. Overall, ASL NPs in combination with LL37 peptides might be developed as an effective topical formulation to prevent bacterial infections in the skin.

Remotely Temporal Scheduled Macrophage Phenotypic Transition Enables Optimized Immunomodulatory Bone Regeneration

Precise timing of macrophage polarization plays a pivotal role in immunomodulation of tissue regeneration, yet most studies mainly focus on M2 macrophages for their anti-inflammatory and regenerative effects while the essential proinflammatory role of the M1 phenotype on the early inflammation stage is largely underestimated. Herein, a superparamagnetic hydrogel capable of timely controlling macrophage polarization is constructed by grafting superparamagnetic nanoparticles on collagen nanofibers. The magnetic responsive hydrogel network enables efficient polarization of encapsulated macrophage to the M2 phenotype through the podosome/Rho/ROCK mechanical pathway in response to static magnetic field (MF) as needed. Taking advantage of remote accessibility of magnetic field together with the superparamagnetic hydrogels, a temporal engineered M1 to M2 transition course preserving the essential role of M1 at the early stage of tissue healing, as well as enhancing the prohealing effect of M2 at the middle/late stages is established via delayed MF switch. Such precise timing of macrophage polarization matching the regenerative process of injured tissue eventually leads to optimized immunomodulatory bone healing in vivo. Overall, this study offers a remotely time-scheduled approach for macrophage polarization, which enables precise manipulation of inflammation progression during tissue healing.

Engineered Nanotechnology: An Effective Therapeutic Platform for the Chronic Cutaneous Wound

The healing of chronic wound infections, especially cutaneous wounds, involves a complex cascade of events demanding mutual interaction between immunity and other natural host processes. Wound infections are caused by the consortia of microbial species that keep on proliferating and produce various types of virulence factors that cause the development of chronic infections. The mono- or polymicrobial nature of surface wound infections is best characterized by its ability to form biofilm that renders antimicrobial resistance to commonly administered drugs due to poor biofilm matrix permeability. With an increasing incidence of chronic wound biofilm infections, there is an urgent need for non-conventional antimicrobial approaches, such as developing nanomaterials that have intrinsic antimicrobial-antibiofilm properties modulating the biochemical or biophysical parameters in the wound microenvironment in order to cause disruption and removal of biofilms, such as designing nanomaterials as efficient drug-delivery vehicles carrying antibiotics, bioactive compounds, growth factor antioxidants or stem cells reaching the infection sites and having a distinct mechanism of action in comparison to antibiotics—functionalized nanoparticles (NPs) for better incursion through the biofilm matrix. NPs are thought to act by modulating the microbial colonization and biofilm formation in wounds due to their differential particle size, shape, surface charge and composition through alterations in bacterial cell membrane composition, as well as their conductivity, loss of respiratory activity, generation of reactive oxygen species (ROS), nitrosation of cysteines of proteins, lipid peroxidation, DNA unwinding and modulation of metabolic pathways. For the treatment of chronic wounds, extensive research is ongoing to explore a variety of nanoplatforms, including metallic and nonmetallic NPs, nanofibers and self-accumulating nanocarriers. As the use of the magnetic nanoparticle (MNP)-entrenched pre-designed hydrogel sheet (MPS) is found to enhance wound healing, the bio-nanocomposites consisting of bacterial cellulose and magnetic nanoparticles (magnetite) are now successfully used for the healing of chronic wounds. With the objective of precise targeting, some kinds of “intelligent” nanoparticles are constructed to react according to the required environment, which are later incorporated in the dressings, so that the wound can be treated with nano-impregnated dressing material in situ. For the effective healing of skin wounds, high-expressing, transiently modified stem cells, controlled by nano 3D architectures, have been developed to encourage angiogenesis and tissue regeneration. In order to overcome the challenge of time and dose constraints during drug administration, the approach of combinatorial nano therapy is adopted, whereby AI will help to exploit the full potential of nanomedicine to treat chronic wounds.

Melittin-Based Nano-Delivery Systems for Cancer Therapy

Melittin (MEL) is a 26-amino acid polypeptide with a variety of pharmacological and toxicological effects, which include strong surface activity on cell lipid membranes, hemolytic activity, and potential anti-tumor properties. However, the clinical application of melittin is restricted due to its severe hemolytic activity. Different nanocarrier systems have been developed to achieve stable loading, side effects shielding, and tumor-targeted delivery, such as liposomes, cationic polymers, lipodisks, etc. In addition, MEL can be modified on nano drugs as a non-selective cytolytic peptide to enhance cellular uptake and endosomal/lysosomal escape. In this review, we discuss recent advances in MEL’s nano-delivery systems and MEL-modified nano drug carriers for cancer therapy.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

Bioinspired drug delivery strategies for repurposing conventional antibiotics against intracellular infections

Bacteria have developed a wealth of strategies to avoid and resist the action of antibiotics, one of which involves pathogens invading and forming reservoirs within host cells. Due to the poor cell membrane permeability, stability and retention of conventional antibiotics, this renders current treatments largely ineffective, since achieving a therapeutically relevant antibiotic concentration at the site of intracellular infection is not possible. To overcome such challenges, current antibiotics are 'repurposed' via reformulation using micro- or nano-carrier systems that effectively encapsulate and deliver therapeutics across cellular membranes of infected cells. Bioinspired materials that imitate the uptake of biological particulates and release antibiotics in response to natural stimuli are recently explored to improve the targeting and specificity of this 'nanoantibiotic' approach. In this review, the mechanisms of internalization and survival of intracellular bacteria are elucidated, effectively accentuating the current treatment challenges for intracellular infections and the implications for repurposing conventional antibiotics. Key case studies of nanoantibiotics that have drawn inspiration from natural biological particles and cellular uptake pathways to effectively eradicate intracellular pathogens are detailed, clearly highlighting the rational for harnessing bioinspired drug delivery strategies.

Antimicrobial peptides - Unleashing their therapeutic potential using nanotechnology

Antimicrobial peptides (AMPs) are potent, mostly cationic, and amphiphilic broad-spectrum host defense antimicrobials that are produced by all organisms ranging from prokaryotes to humans. In addition to their antimicrobial actions, they modulate inflammatory and immune responses and promote wound healing. Although they have clear benefits over traditional antibiotic drugs, their wide therapeutic utilization is compromised by concerns of toxicity, stability, and production costs. Recent advances in nanotechnology have attracted increasing interest to unleash the AMPs' immense potential as broad-spectrum antibiotics and anti-biofilm agents, against which the bacteria have less chances to develop resistance. Topical application of AMPs promotes migration of keratinocytes and fibroblasts, and contributes significantly to an accelerated wound healing process. Delivery of AMPs by employing nanotechnological approaches avoids the major disadvantages of AMPs, such as instability and toxicity, and provides a controlled delivery profile together with prolonged activity. In this review, we provide an overview of the key properties of AMPs and discuss the latest developments in topical AMP therapy using nanocarriers. We use chronic hard-to-heal wounds-complicated by infections, inflammation, and stagnated healing-as an example of an unmet medical need for which the AMPs' wide range of therapeutic actions could provide the most potential benefit. The use of innovative materials and sophisticated nanotechnological approaches offering various possibilities are discussed in more depth.

3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure

Scaffold-mediated tissue engineering has become a golden solution for the regeneration of damaged bone tissues that lack self-regeneration capability. A successful scaffold in bone tissue engineering comprises a multitude of suitable biological, microarchitectural, and mechanical properties acting as different signaling cues for the cells to mediate the new tissue formation. Therefore, careful design of bioactive scaffold macro- and microstructures in multiple length scales and biophysical properties fulfilling the tissue repair demands are necessary yet challenging to achieve. Herein, we have developed an antibacterial and biocompatible silica-silk fibroin (SF) gel-based ink through novel yet simple chemical approaches of sol-gel and self-assembly followed by processing the obtained gels as three-dimensional (3D) hybrid aerogel-based scaffolds exploiting the advanced materials design approaches of micro-extrusion-based 3D printing, and directional freeze-casting/drying approaches. As the main constituent of the hybrid biocompatible scaffold of this study, we used the SF extracted from Bombyx mori silkworm cocoon. However, to increase the cell responsivity and bactericidal efficiency of the final scaffold, thiol-ended antimicrobial and cell adhesive peptide sequence (SH-CM-RGD) was conjugated to silica-SF hybrid gels via covalent attachment using a spacer molecule through either preprint (prior to sol-gel) or during the post-printing steps on the previously printed silica-SF gel. In the next step, the hybrid Silica-SF-CM-RGD hydrogel ink was 3D-printed into the construct with interconnected porous structure with hierarchically organized porosity and a combination of several promising properties. Namely, due to the covalent linkage of the antibacterial peptide to the SF, the scaffold shows potent bactericidal efficiency toward Gram-positive and Gram-negative bacteria. Moreover, nanostructured silica components in the 3D-printed composites could intertwine with SF-CM-RGD to support the mechanical properties in the final scaffold and the final osteoconductivity of the scaffold. This study supports the promising properties of 3D-printed silica-SF-based hybrid aerogels constructs for repairing bone defect.

Antimicrobial Peptides and Proteins: From Nature's Reservoir to the Laboratory and Beyond

Rapid rise of antimicrobial resistance against conventional antimicrobials, resurgence of multidrug resistant microbes and the slowdown in the development of new classes of antimicrobials, necessitates the urgent development of alternate classes of therapeutic molecules. Antimicrobial peptides (AMPs) are small proteins present in different lifeforms in nature that provide defense against microbial infections. They have been effective components of the host defense system for a very long time. The fact that the development of resistance by the microbes against the AMPs is relatively slower or delayed compared to that against the conventional antibiotics, makes them prospective alternative therapeutics of the future. Several thousands of AMPs have been isolated from various natural sources like microorganisms, plants, insects, crustaceans, animals, humans, etc. to date. However, only a few of them have been translated commercially to the market so far. This is because of some inherent drawbacks of the naturally obtained AMPs like 1) short half-life owing to the susceptibility to protease degradation, 2) inactivity at physiological salt concentrations, 3) cytotoxicity to host cells, 4) lack of appropriate strategies for sustained and targeted delivery of the AMPs. This has led to a surge of interest in the development of synthetic AMPs which would retain or improve the antimicrobial potency along with circumventing the disadvantages of the natural analogs. The development of synthetic AMPs is inspired by natural designs and sequences and strengthened by the fusion with various synthetic elements. Generation of the synthetic designs are based on various strategies like sequence truncation, mutation, cyclization and introduction of unnatural amino acids and synthons. In this review, we have described some of the AMPs isolated from the vast repertoire of natural sources, and subsequently described the various synthetic designs that have been developed based on the templates of natural AMPs or from de novo design to make commercially viable therapeutics of the future. This review entails the journey of the AMPs from their natural sources to the laboratory.

Gold Nanomaterials as a Promising Integrated Tool for Diagnosis and Treatment of Pathogenic Infections-A Review

This review summarizes research on functionalized gold nanomaterials as pathogen detection sensors and pathogen elimination integrated tools. After presenting the challenge of current severe threat from pathogenic bacteria and the increasingly serious growth rate of drug resistance, the first section mainly introduces the conspectus of gold nanostructures from synthesis, characterization, physicochemical properties and applications of gold nanomaterials. The next section deals with gold nanomaterials-based pathogen detection sensors such as colorimetric sensors, fluorescence sensors and Surface-Enhanced Raman Scattering sensors. We then discuss strategies based on gold nanomaterials for eliminating pathogenic infections, such as the dual sterilization strategy for grafting gold nanomaterials with antibacterial substances, photothermal antibacterial and photodynamic antibacterial methods. The fourth part briefly introduces the comprehensive strategy for diagnosis and sterilization of pathogen infection based on gold nanomaterials, such as the diagnosis and treatment strategy for pathogen infection using Roman signals real-time monitoring and photothermal sterilization. A concluding section that summarizes the current status and challenges of the novel diagnosis and treatment integrated strategy for pathogenic infections, gives an outlook on potential future perspectives.

Biomedical applications of the peptide decorated gold nanoparticles

Currently, peptide-nanoparticle (NP) conjugates have been demonstrated to be efficient and powerful tools for the treatment and the diagnosis of various diseases as well as in the bioimaging application. Several bioconjugation strategies have been adopted to formulate the peptide-NP conjugates. In this review, we discuss the exciting applications of peptide-gold (Au) NP conjugates in the area of drug delivery, targeting, cancer therapy, brain diseases, vaccines, immune modulation, biosensor, colorimetric detection of heavy metals, and bio-labeling in vitro and in vivo models. Within this framework, various approaches such as radiotherapy, photothermal therapy, photodynamic therapy and chemo-photothermal therapy have been demonstrated for the treatment of several diseases. Moreover, we highlight how the morphology, size, density of peptide and the protein corona influence the biological activity, biodistribution and biological fate of peptide-AuNP conjugates. In the end, we discuss the future outlook and the challenges being faced in the clinical translation of the peptide-AuNP conjugates. Overall, this review emphasizes that the peptide-AuNP conjugates might be used as potential theranostic agents for the treatment of life-threatening diseases in an economical fashion in the future.

Combining Antimicrobial Peptides with Nanotechnology: An Emerging Field in Theranostics

The emergence of multidrug-resistant pathogens and their rapid adaptation against new antibiotics is a major challenge for scientists and medical professionals. Different approaches have been taken to combat this problem, which includes rationally designed potent antimicrobial peptides (AMPs) and several nanoparticles and quantum dots. AMPs are considered as a new generation of super antibiotics that hold enormous potential to fight against bacterial resistance by the rapidly killing planktonic as well as their biofilm form while keeping low toxicity profile against eukaryotic cells. Various nanoparticles and quantum dots have proved their effectiveness against a vast array of infections and diseases. Conjugation and functionalization of nanoparticles with potentially active antimicrobial peptides have added advantages that widen their applications in the field of drug discovery as well as delivery system including imaging and diagnostics. This article reviews the current progress and implementation of different nanoparticles and quantum dots conjugated antimicrobial peptides in terms of bio-stability, drug delivery, and therapeutic applications.

Unraveling dominant surface physicochemistry to build antimicrobial peptide coatings with supramolecular amphiphiles

With the increasing threat from antibiotic-resistant bacteria, surface modification with antimicrobial peptides (AMP) has been promisingly explored for preventing bacterial infections. Little is known about the critical factors that govern AMP-surface interactions to obtain stable and active coatings. Here, we systematically monitored the adsorption of a designer amphipathic AMP, GL13K, on model surfaces. Self-assembly of the GL13K peptides formed supramolecular amphiphiles that highly adsorbed on negatively charged, polar hydroxyapatite-coated sensors. We further tuned surface charge and/or surface polarity with self-assembled monolayers (SAMs) on Au sensors and studied their interactions with adsorbed GL13K. We determined that the surface polarity of the SAM-coated sensors instead of their surface charge was the dominant factor governing AMP/substrate interactions via hydrogen bonding. Our findings will instruct the universal design of efficient self-assembled AMP coatings on biomaterials, biomedical devices and/or natural tissues.

Preparation and characterisation of bifunctional surface-modified silicone catheter in lumen

OBJECTIVES

The purpose of this study was to evaluate the coating of antimicrobial peptides (AMPs) and polyvinylpyrrolidone (PVP) to the surface of a silicone catheter to reduce bacterial growth and to increase hydrophilicity, respectively.

METHODS

Surface characterisation was performed on bare silicone, AMP-coated, PVP-coated and AMP + PVP-coated silicone catheters using attenuated total reflectance-infrared (ATR-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and water contact angle. Antibacterial activity, antibacterial biofilm growth and XTT assay were performed on bare silicone, AMP-coated, PVP-coated and AMP + PVP-coated silicone catheters. Statistical analysis was performed by one-way ANOVA.

RESULTS

The water contact angle of the AMP + PVP-coated silicone catheter was 21.37 ± 2.17° compared with 107.23 ± 0.96°, 74.40 ± 1.76° and 20.77 ± 0.32° for bare silicone, AMP-coated and PVP-coated silicone catheters. Based on in vitro antimicrobial tests, the AMP + PVP-coated silicone catheter had 6.2, 2.2 and 2.5 greater antibacterial activity than that of the bare silicone catheter against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa, respectively. Moreover, bacterial biofilm growth on the surface of the AMP + PVP-coated silicone catheter was minimal as characterised by scanning electron microscopy. MTT assay showed that bare silicone, AMP-coated, AMP + PVP-coated and PVP-coated silicone catheters were non-cytotoxic to 3T3 and human colon cancer (Caco-2) cells.

CONCLUSIONS

This work demonstrates that AMP + PVP-coated silicone catheters have potential clinical application prospects with improved hydrophilicity, excellent biocompatibility, antibacterial activity and a certain antibacterial biofilm effect.

Towards Robust Delivery of Antimicrobial Peptides to Combat Bacterial Resistance

Antimicrobial peptides (AMPs), otherwise known as host defence peptides (HDPs), are naturally occurring biomolecules expressed by a large array of species across the phylogenetic kingdoms. They have great potential to combat microbial infections by directly killing or inhibiting bacterial activity and/or by modulating the immune response of the host. Due to their multimodal properties, broad spectrum activity, and minimal resistance generation, these peptides have emerged as a promising response to the rapidly concerning problem of multidrug resistance (MDR). However, their therapeutic efficacy is limited by a number of factors, including rapid degradation, systemic toxicity, and low bioavailability. As such, many strategies have been developed to mitigate these limitations, such as peptide modification and delivery vehicle conjugation/encapsulation. Oftentimes, however, particularly in the case of the latter, this can hinder the activity of the parent AMP. Here, we review current delivery strategies used for AMP formulation, focusing on methodologies utilized for targeted infection site release of AMPs. This specificity unites the improved biocompatibility of the delivery vehicle with the unhindered activity of the free AMP, providing a promising means to effectively translate AMP therapy into clinical practice.

PH-Responsive, Cell-Penetrating, Core/Shell Magnetite/Silver Nanoparticles for the Delivery of Plasmids: Preparation, Characterization, and Preliminary In Vitro Evaluation

Over the past decade, gene therapies have attracted much attention for the development of treatments for various conditions, including cancer, neurodegenerative diseases, protein deficiencies, and autoimmune disorders. Despite the benefits of this approach, several challenges are yet to be solved to reach clinical implementation. Some of these challenges include low transfection rates, limited stability under physiological conditions, and low specificity towards the target cells. An avenue to overcome such issues is to deliver the therapies with the aid of potent cell-penetrating vectors. Non-viral vectors, such as nanostructured materials, have been successfully tested in drug and gene delivery. Here, we propose the development and in vitro evaluation of a nanostructured cell-penetrating vehicle based on core/shell, magnetite/silver nanoparticles. A subsequent conjugation of a pH-responsive polymer was used to assure that the vehicle can carry and release circular DNA. Additionally, the translocating peptide Buforin II was conjugated with the aid of a polyether amine polymer to facilitate translocation and endosome escape. The obtained nanobioconjugates (magnetite/silver-pDMAEMA-PEA-BUFII) were characterized by UV-Vis spectrophotometry, dynamic light scattering (DLS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope equipped with energy dispersive spectroscopy (SEM+EDS), and transmission electron microscopy (TEM). They were also encapsulated in lecithin liposomes to form magnetoliposomes. The cell viability of Vero cells in the presence of the nanobioconjugates was above 95% and declined to 80% for the magnetoliposomes. The hemolytic tendency of nanobioconjugates and magnetoliposomes was below 10%, while the platelet aggregation approached that of the negative control (i.e., 35%). Cytoplasm coverage values of about 50% for both Vero and neuroblastoma cells confirmed significant cell penetration. Pearson's correlation coefficients for both cell lines allowed us to estimate 20-40% colocalization of the nanobioconjugates with lysotracker green, which implied high levels of endosomal escape. The developed vehicles were also capable of loading around 16% of the added DNA and releasing such cargo with 8% efficiency. The developed nanoplatform holds a significant promise to enable highly efficient gene therapies as it overcomes some of the major issues associated with their eventual translation to the pre-clinical and clinical scale.

Advances in Lipid and Metal Nanoparticles for Antimicrobial Peptide Delivery

Antimicrobial peptides (AMPs) have been described as excellent candidates to overcome antibiotic resistance. Frequently, AMPs exhibit a wide therapeutic window, with low cytotoxicity and broad-spectrum antimicrobial activity against a variety of pathogens. In addition, some AMPs are also able to modulate the immune response, decreasing potential harmful effects such as sepsis. Despite these benefits, only a few formulations have successfully reached clinics. A common flaw in the druggability of AMPs is their poor pharmacokinetics, common to several peptide drugs, as they may be degraded by a myriad of proteases inside the organism. The combination of AMPs with carrier nanoparticles to improve delivery may enhance their half-life, decreasing the dosage and thus, reducing production costs and eventual toxicity. Here, we present the most recent advances in lipid and metal nanodevices for AMP delivery, with a special focus on metal nanoparticles and liposome formulations.

Pharmaceutical Applications of Iron-Oxide Magnetic Nanoparticles

Advances of nanotechnology led to the development of nanoparticulate systems with many advantages due to their unique physicochemical properties. The use of iron-oxide magnetic nanoparticles (IOMNPs) in pharmaceutical areas increased in the last few decades. This article reviews the conceptual information about iron oxides, magnetic nanoparticles, methods of IOMNP synthesis, properties useful for pharmaceutical applications, advantages and disadvantages, strategies for nanoparticle assemblies, and uses in the production of drug delivery, hyperthermia, theranostics, photodynamic therapy, and as an antimicrobial. The encapsulation, coating, or dispersion of IOMNPs with biocompatible material(s) can avoid the aggregation, biodegradation, and alterations from the original state and also enable entrapping the bioactive agent on the particle via adsorption or covalent attachment. IOMNPs show great potential for target drug delivery, improving the therapy as a consequence of a higher drug effect using lower concentrations, thus reducing side effects and toxicity. Different methodologies allow IOMNP synthesis, resulting in different structures, sizes, dispersions, and surface modifications. These advantages support their utilization in pharmaceutical applications, and getting suitable drug release control on the target tissues could be beneficial in several clinical situations, such as infections, inflammations, and cancer. However, more toxicological clinical investigations about IOMNPs are necessary.

pH/Redox-Controlled Interaction between Lipid Membranes and Peptide Derivatives with a "Helmet"

How to reduce the cytotoxicity of antitumor peptides to normal cells remains an ongoing challenge. Here, we designed a pH/redox-responsive supramolecular structure (Pep-V⊂P-PEG) composed of a peptide modified with viologen (Pep-V) and polyethylene glycol bearing pillar[5]arene (P-PEG) as a "helmet". By shielding the hydrophobic moiety of the peptide derivative with pillar[5]arene via host-guest interactions, its disruption on normal cells can be effectively reduced. At acidic pH, the supramolecular structure can selectively adsorb onto negatively charged lipid membranes because of electrostatic interactions. Owing to redox responsiveness of the viologen group, Pep-V could be separated from P-PEG after the addition of reductants and inserted into lipid bilayers, which leads to membrane disruption. Cargo leakage of liposome models was investigated to understand Pep-V⊂P-PEG-induced liposomal membrane disruption under different pH values and redox conditions. Results showed that Pep-V⊂P-PEG caused almost no cargo leakage from (1,2-dipalmitoyl-sn-glycerol-3-phosphocholine) liposomes at pH 7.4 but significant leakage from negatively charged (1,2-dipalmitoyl-sn-glycerol-3-phospho-(1-rac-glyerol)) liposomes at pH 5.0 under a reducing environment. Pep-V⊂P-PEG displayed low destructive effects on mimic normal cells and significant disruption to mimic tumor cells when exposed to a reducing environment that is expected to be a potential antitumor agent.

Complexation between antimicrobial peptides and polyelectrolytes

As a result of increasing bacterial resistance against antibiotics, we are facing an emerging health crisis, in which 'simple' infections may no longer be treatable. One class of molecules attracting interest in this context is antimicrobial peptides (AMPs), and considerable research efforts have been directed to identifying selective and potent AMPs. In addition, since in vivo delivery of AMPs is challenging, there is an emerging awareness that successful development of AMP therapeutics can be facilitated by careful design of AMPs delivery systems. In the present overview, we discuss polyelectrolyte complexation as a strategy to deliver AMPs. In doing so, key factors for AMP-polyelectrolyte complexation are illustrated for AMP-polyelectrolyte nanoparticle formation, as well as for AMP incorporation in polyelectrolyte microgels and multilayer structures, and consequences of these for functional performance exemplified.

Magnetic Micromachine Using Nickel Nanoparticles for Propelling and Releasing in Indirect Assembly of Cell-Laden Micromodules

Magnetic micromachines as wireless end-effectors have been widely applied for drug discovery and regenerative medicine. Yet, the magnetic assembly of arbitrarily shaped cellular microstructures with high efficiency and flexibility still remains a big challenge. Here, a novel clamp-shape micromachine using magnetic nanoparticles was developed for the indirect untethered bioassembly. With a multi-layer template, the nickel nanoparticles were mixed with polydimethylsiloxane (PDMS) for mold replication of the micromachine with a high-resolution and permeability. To actuate the micromachine with a high flexibility and large scalable operation range, a multi-pole electromagnetic system was set up to generate a three-dimensional magnetic field in a large workspace. Through designing a series of flexible translations and rotations with a velocity of 15mm/s and 3 Hz, the micromachine realized the propel-and-throw strategy to overcome the inevitable adhesion during bioassembly. The hydrogel microstructures loaded with different types of cells or the bioactive materials were effectively assembled into microtissues with reconfigurable shape and composition. The results indicate that indirect magnetic manipulation can perform an efficient and versatile bioassembly of cellular micromodules, which is promising for drug trials and modular tissue engineering.

A perspective on magnetic core-shell carriers for responsive and targeted drug delivery systems

Magnetic core-shell nanocarriers have been attracting growing interest owing to their physicochemical and structural properties. The main principles of magnetic nanoparticles (MNPs) are localized treatment and stability under the effect of external magnetic fields. Furthermore, these MNPs can be coated or functionalized to gain a responsive property to a specific trigger, such as pH, heat, or even enzymes. Current investigations have been focused on the employment of this concept in cancer therapies. The evaluation of magnetic core-shell materials includes their magnetization properties, toxicity, and efficacy in drug uptake and release. This review discusses some categories of magnetic core-shell drug carriers based on Fe2O3 and Fe3O4 as the core, and different shells such as poly(lactic-co-glycolic acid), poly(vinylpyrrolidone), chitosan, silica, calcium silicate, metal, and lipids. In addition, the review addresses their recent potential applications for cancer treatment.

Antimicrobial magnetic nanoparticles based-therapies for controlling infectious diseases

In the last years, the antimicrobial resistance against antibiotics has become a serious health issue, arise as global threat. This has generated a search for new strategies in the progress of new antimicrobial therapies. In this context, different nanosystems with antimicrobial properties have been studied. Specifically, magnetic nanoparticles seem to be very attractive due to their relatively simple synthesis, intrinsic antimicrobial activity, low toxicity and high versatility. Iron oxide NPs (IONPs) was authorized by the World Health Organization for human used in biomedical applications such as in vivo drug delivery systems, magnetic guided therapy and contrast agent for magnetic resonance imaging have been widely documented. Furthermore, the antimicrobial activity of different magnetic nanoparticles has recently been demonstrated. This review elucidates the recent progress of IONPs in drug delivery systems and focuses on the treatment of infectious diseases and target the possible detrimental biological effects and associated safety issues.

Electrical detection of pathogenic bacteria in food samples using information visualization methods with a sensor based on magnetic nanoparticles functionalized with antimicrobial peptides

Outbreaks of foodborne diseases demand simple, rapid techniques for detecting pathogenic bacteria beyond the standard methods that are not applicable to routine analysis in the food industry and in the points of food consumption. In this work, we developed a sensitive, rapid and low-cost assay for detecting Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Salmonella typhimurium (S. typhi) in potable water and apple juice. The assay is based on electrical impedance spectroscopy measurements with screen-printed interdigitated electrodes coupled with magnetite nanoparticles functionalized with the antimicrobial peptide melittin (MLT). The data were analyzed with the information visualization methods Sammon's Mapping and Interactive Document Map to distinguish samples at two levels of contamination from food suitable for consumption. With this approach it has been possible to detect E. coli concentration down to 1 CFU mL^-1 in potable water and 3.5 CFU mL^-1 in apple juice without sample preparation, within only 25 min. This approach may serve as a low-cost, quick screening procedure to detect bacteria-related food poisoning, especially if the impedance data of several sensing units are combined.

Antimicrobial peptide modification enhances the gene delivery and bactericidal efficiency of gold nanoparticles for accelerating diabetic wound healing

Impaired angiogenesis and bacterial infection have increasingly been implicated as the major causes of delayed diabetic wound healing. However, there is currently no effective therapy. Here, we optimized a novel gene delivery system based on antimicrobial peptide (LL37) grafted ultra-small gold nanoparticles (AuNPs@LL37, ∼7 nm) for the topical treatment of diabetic wounds with or without bacterial infection. AuNPs@LL37 combines the advantages of cationic AuNPs that condense DNA with those of antibacterial peptides, which are both highly antibacterial and essential for enhancing cellular and nucleus entry to achieve high gene delivery efficiency. AuNPs@LL37 combined with pro-angiogenic (VEGF) plasmids (AuNPs@LL37/pDNAs) significantly improved the gene transfection efficiency in keratinocytes compared with pristine AuNPs/pDNAs, and showed similar expression to Lipo2000/pDNAs (a well-known highly efficient gene transfection agent). Moreover, our therapeutic depot showed higher antibacterial ability than the free antimicrobial peptides and the cationic AuNPs alone in vitro and in vivo due to synergistic effects. Furthermore, the combined system promoted angiogenesis and inhibited bacterial infection in diabetic wounds, resulting in accelerated wound closure rates, faster re-epithelization, improved granulation tissue formation and high VEGF expression. Finally, our therapeutic depot was highly biocompatible in vitro and in vivo, suggesting its potential as a feasible way to treat chronic diabetic wounds.

Nanoscale Melittin@Zeolitic Imidazolate Frameworks for Enhanced Anticancer Activity and Mechanism Analysis

The cytolytic peptide melittin (MLT) is an important candidate of anticancer drug owing to its hemolytic properties. Nevertheless, its clinical applications are severely restricted as a result of its nonspecific toxicities like hemolysis. In this work, we reported MLT-loaded zeolitic imidazolate framework-8 (MLT@ZIF-8) nanoparticles (NPs). The formed MLT@ZIF-8 NPs not only possess excellent stability but also efficiently inhibit the hemolysis bioactivity of MLT. Confocal scanning imaging and cytotoxicity experiments revealed that as-synthesized MLT@ZIF-8 NPs exhibit enhanced cellular uptake and cytotoxicity toward cancer cells compared to MLT. The mechanism is well investigated by a series of transcriptome analysis, which indicates that MLT@ZIF-8 NPs can regulate the expression of 3383 genes, and the PI3K/Akt-regulated p53 pathway is involved in MLT@ZIF-8 NPs induced A549 cells apoptosis. Finally, MLT@ZIF-8 NPs exhibit enhanced antitumor activity than free MLT in vivo, while no obvious systemic toxicity has been found. This work emphasizes the great potential of utilizing MOF as a simple and efficient nanoplatform for deliverying cytolytic peptides in cancer treatment, and also the investigation on the antitumor mechanism could provide theoretical support for clinical usage of MLT.

Modulation of Angiogenic Activity by Light-Activatable miRNA-Loaded Nanocarriers

The combinatorial delivery of miRNAs holds great promise to modulate cell activity in the context of angiogenesis. Yet, the delivery of multiple miRNAs with spatiotemporal control remains elusive. Here, we report a plasmonic nanocarrier to control the release of two microRNAs. The nanocarrier consists of gold nanorods modified with single-stranded DNA for hybridization with complementary DNA-conjugated microRNAs. DNA strands with distinct melting temperatures enable the independent release of each microRNA with a near-infrared laser using the same wavelength but different powers. Tests in human outgrowth endothelial cells (OECs) indicate that this system can be used to silence different targets sequentially and, by doing so, to modulate cell activity with spatiotemporal resolution. Finally, using an in vivo acute wound healing animal model, it is demonstrated that the order by which each miRNA was released in transplanted OECs significantly impacted the wound healing kinetics.

Synthesis, Radiolabelling and In Vitro Imaging of Multifunctional Nanoceramics

Molecular imaging has become a powerful technique in preclinical and clinical research aiming towards the diagnosis of many diseases. In this work, we address the synthetic challenges in achieving lab-scale, batch-to-batch reproducible copper-64- and gallium-68-radiolabelled metal nanoparticles (MNPs) for cellular imaging purposes. Composite NPs incorporating magnetic iron oxide cores with luminescent quantum dots were simultaneously encapsulated within a thin silica shell, yielding water-dispersible, biocompatible and luminescent NPs. Scalable surface modification protocols to attach the radioisotopes 64Cu (t1/2=12.7 h) and 68Ga (t1/2=68 min) in high yields are reported, and are compatible with the time frame of radiolabelling. Confocal and fluorescence lifetime imaging studies confirm the uptake of the encapsulated imaging agents and their cytoplasmic localisation in prostate cancer (PC-3) cells. Cellular viability assays show that the biocompatibility of the system is improved when the fluorophores are encapsulated within a silica shell. The functional and biocompatible SiO2 matrix represents an ideal platform for the incorporation of 64Cu and 68Ga radioisotopes with high radiolabelling incorporation.

Enhanced silver loaded antibacterial titanium implant coating with novel hierarchical effect

In this study, we present a novel strategy for hierarchical antibacterial implant coating by controlling structural and componential features as regulators of surface bactericidal property. Anodized titanium dioxide nanotubes and self-polymerized polydopamine were both used as preliminary antibacterial agents with a significant positive effect on surface bioactivity. At the same time, the storage capacity of nanotubes and the in situ reduction activity of polydopamine can introduce large amounts of strong attached silver nanoparticles for enhanced stable antibacterial performance. The surface morphology, chemical composition, and hydrophilicity had been thoroughly characterized. The sustained silver release performances were continuously monitored. The successively in vitro inhibition on Staphylococcus aureus growth of titanium dioxide nanotube, polydopamine layer and silver nanoparticles demonstrated the hierarchical antibacterial property of the final silver nanoparticles-incorporated polydopamine-modified titanium dioxide nanotube coating (silver/polydopamine/nanotube). Moreover, the bioactivity investigation indicated the vital role of polydopamine-modified titanium dioxide nanotube coating on preserving healthy osteoblast activity at the implant interface. The unique hierarchical coating for titanium implant may be a promising method to maximize antibacterial capacity and maintain good cellular activity at the same time.

Membrane interactions and antimicrobial effects of inorganic nanoparticles

Interactions between nanoparticles and biological membranes are attracting increasing attention in current nanomedicine, and play a key role both for nanotoxicology and for utilizing nanomaterials in diagnostics, drug delivery, functional biomaterials, as well as combinations of these, e.g., in theranostics. In addition, there is considerable current interest in the use of nanomaterials as antimicrobial agents, motivated by increasing resistance development against conventional antibiotics. Here, various nanomaterials offer opportunities for triggered functionalites to combat challenging infections. Although the performance in these diverse applications is governed by a complex interplay between the nanomaterial, the properties of included drugs (if any), and the biological system, nanoparticle-membrane interactions constitute a key initial step and play a key role for the subsequent biological response. In the present overview, the current understanding of inorganic nanomaterials as antimicrobial agents is outlined, with special focus on the interplay between antimicrobial effects and membrane interactions, and how membrane interactions and antimicrobial effects of such materials depend on nanoparticle properties, membrane composition, and external (e.g., light and magnetic) fields.

Controllable synthesis Fe3O4@POHABA core-shell nanostructure as high-performance recyclable bifunctional magnetic antimicrobial agent

We demonstrated a method to form magnetic antimicrobial POHABA (poly-N,N'-[(4,5-dihydroxy-1,2-phenylene)bis(methylene)]bisacrylamide)-based core-shell nanostructure by free-radical polymerization of OHABA on the Fe₃O₄ core surface. The magnetic antimicrobial agent Fe₃O₄@POHABA can be used in domestic water treatment against bacterial pathogens. The thickness of POHABA shell could be controlled from 10.4 ± 1.2 to 56.3 ± 11.7 nm by the dosage of OHABA. The results of antimicrobial-activity test indicated that POHABA-based core-shell nanostructure had broad-spectrum inhibitory against Gram-negative, Gram-positive bacteria and fungi. The minimum inhibitory concentration (MIC) values of Fe₃O₄@POHABA nanostructure against Escherichia coli and Bacillus subtilis were both 0.4 mg/mL. Fe₃O₄@POHABA nanostructures responded to a permanent magnet and were easily recycled. Fe₃O₄@POHABA nanoparticles retained 100% antimicrobial efficiency for both Gram-negative and Gram-positive bacteria throughout eight recycle procedures.

Antimicrobial peptide-gold nanoscale therapeutic formulation with high skin regenerative potential

Chronic skin wounds affect ≈3% of persons aged >60years (Davies et al., 2007) [1]. These wounds are typically difficult to heal by conventional therapies and in many cases they get infected making even harder the regeneration process. The antimicrobial peptide (AMP) LL37 combines antimicrobial with pro-regenerative properties and thus represents a promising topical therapy to address both problems. Here, we investigated the wound healing potential of soluble and immobilized LL37 (LL37-conjugated gold nanoparticles, LL37-Au NPs), both in vitro (migration of keratinocytes) and in vivo (skin wound healing). Our results show that LL37-Au NPs, but not LL37 peptide, have the capacity to prolong the phosphorylation of EGFR and ERK1/2 and enhance the migratory properties of keratinocytes in a large in vitro wound model. We further report that both LL37 and LL37-Au NPs promote keratinocyte migration by the transactivation of EGFR, a process that seems to be initiated at the P2X7 receptor, as confirmed by chemical and genetic inhibition studies. Finally, we show in vivo that LL37-Au NPs have higher wound healing activity than LL37 peptide in a splinted mouse full thickness excisional model. Animal wounds treated by LL37-Au NPs have higher expression of collagen, IL6 and VEGF than the ones treated with LL37 peptide or NPs without LL37. Altogether, the conjugation of AMPs to NPs offers a promising platform to enhance their pro-regenerative properties.

Designed biocompatible nano-inhibitor based on poly(β-cyclodextrin-ester) for reduction of the DEHP migration from plasticized PVC

The easy migration of di(2-ethylhexyl) phthalate (DEHP) from the plasticized PVC (P-PVC) poses a serious threat to human health and the ecosystems. Thus, its control migration from the P-PVC products is very important. In this work, a poly(β-cyclodextrin-ester) network (β-CDP) was synthesized via reaction of β-cyclodextrin with 3,3',4,4'-benzophenone tetracarboxylic dianhydride. As a potential inhibitor for reduction of the DEHP migration, the β-CDP was grafted to Fe₃O₄ nanoparticles. Poly(β-cyclodextrin-ester) functionalized Fe₃O₄ nanoparticles (MNP-CDP) has been used in PVC/DEHP system as a reactive nano-inhibitor to reduce DEHP migration. Thermal stability and mechanical properties of obtained films were investigated. DEHP migration tests of the P-PVC films were also carried out by using Gas chromatography. It was found that by incorporating the small amounts of nano-inhibitor in PVC/DEHP system, the migration of DEHP effectively reduced from the P-PVC samples about 65% without any serious changes in mechanical and thermal properties of the P-PVC films.

Studies on electrochemical glucose sensing, antimicrobial activity and cytotoxicity of fabricated copper nanoparticle immobilized chitin nanostructure

In this study, copper nanoparticle immobilized chitin nanocomposite (CNP/CuNP) was synthesized and used for the development of non-enzymatic electrochemical sensor. The CNP/CuNP was characterized by X-ray diffraction (XRD), fourier transform infra red (FTIR) spectroscopy and high resolution transmission electron microscopy (HRTEM) analysis. The glucose sensing property of CNP/CuNP was investigated by cyclic voltammetry (CV) and chronoamperometry (CA). As a result of the synergistic effect of CNP and CuNP, the modified electrode displayed effective electro-oxidation of glucose in 0.1M NaOH solution. At 0.45V potential the modified electrode showed response towards glucose in the linear range of 1-1000μM with a lowest detection limit of 0.776μM with better selectivity and stability. In addition, the antimicrobial activity of CNP/CuNP was evaluated against bacterial and fungal strains. CNP/CuNP displayed enhanced antimicrobial activity when compared to CNP and CuNP alone. Similarly, cytotoxicity of CNP/CuNP was tested against Artemia salina, which showed no toxic effect in the tested concentration.