Direct and Highly Selective Drug Optosensing in Real, Undiluted Biological Samples with Quantum-Dot-Labeled Hydrophilic Molecularly Imprinted Polymer Microparticles

ZnS:Mn Quantum Dots Coated with a Silica Molecularly Imprinted Polymer for Trace Teflubenzuron Detection in Vegetable Samples

A novel nanocomposite fluorescent probe consisting of quantum dots and a silica molecularly imprinted polymer (MIPs-capped ZnS:Mn QDs) was synthesized and applied for the rapid detection of teflubenzuron (TBZ) based on the fluorescence quenching of a composite probe via TBZ. The fluorescence quenching efficiency of MIP@SiO2@ZnS:Mn QDs displayed a linear relationship over the concentration range of 0-26.24 μmol/L with a correlation coefficient of 0.9857 and the limit of detection was 2.4 μg/L. The selectivity test showed that the nanocomposite had good selectively rebind TBZ with higher imprinting factor of 3.06 compared with four structurally similar compounds. In addition, the probe was successfully applied to the detection of TBZ in vegetable samples with a recovery of 90.3~97.1% and with a relative standard deviation below 3.2%. This developed method has the advantages of simple preparation, fast response and low toxicity for trace TBZ detection.

Preparation of poly(caffeic acid)-coated epitope molecularly imprinted polymers and investigation of adsorption performance toward ovalbumin

Food allergy can lead to severe allergic reactions that are potentially fatal for human, hence the detection of food allergens such as ovalbumin (OVA) is important. In this study, a poly(caffeic acid)-coated epitope molecularly imprinted polymer (EMIP) was prepared by chelation and autoxidation of caffeic acid with hexamethylenediamine. EMIP has not only imprinted cavities highly matched with OVA in size and spatial structure, but also externally abundant hydrophilic groups, resulting in few non-specific binding and good hydrophilicity. With high specificity, significant paramagnetism, and great reusability, EMIP can distinguish OVA from other proteins and selectively enrich OVA in egg white samples, which opens up a promising route to the determination of allergens in food products.

Selenium-based nanozyme as a fluorescence-enhanced probe and imaging for chlortetracycline in living cells and foods

Developing rapid monitoring methods to detect antibiotic residues in food plays an important role in safeguarding human health. This study presents the development of a novel fluorescence-enhanced detection method for chlortetracycline (CTC) using a GSH-Se nanozyme. A GSH-Se nanozyme prepared using a one-pot hydrothermal method not only possesses excellent fluorescent properties but also exhibits good glutathione peroxidase-like activity. The results show that the addition of CTC leads to a significant enhancement in the fluorescence intensity of GSH-Se, and this increase exhibits a good linear relationship with the concentration of CTC. The linear range of this method is 0.02-1 µM, and the limit of detection (LOD) for CTC was 0.02 µM. Moreover, the cell toxicity of GSH-Se is low and can be used for monitoring and imaging of CTC in cells, and satisfactory results have been obtained in the analysis of actual food samples.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

Efficient Optosensing of Hippuric Acid in the Undiluted Human Urine with Hydrophilic "Turn-On"-Type Fluorescent Hollow Molecularly Imprinted Polymer Microparticles

The development of complex biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with improved performances is highly important for their real-world bioanalytical and biomedical applications. Herein, we report on the first hydrophilic "turn-on"-type fluorescent hollow MIP microparticles capable of directly, highly selectively, and rapidly optosensing hippuric acid (HA) in the undiluted human urine samples. These fluorescent hollow MIP microparticles were readily obtained through first the synthesis of core-shell-corona-structured nitrobenzoxadiazole (NBD)-labeled hydrophilic fluorescent MIP microspheres by performing one-pot surface-initiated atom transfer radical polymerization on the preformed "living" silica particles and subsequent removal of their silica core via hydrofluoric acid etching. They showed "turn-on" fluorescence and high optosensing selectivity and sensitivity toward HA in the artificial urine (the limit of detection = 0.097 μM) as well as outstanding photostability and reusability. Particularly, they exhibited much more stable aqueous dispersion ability, significantly faster optosensing kinetics, and higher optosensing sensitivity than their solid counterparts. They were also directly used for quantifying HA in the undiluted human urine with good recoveries (96.0%-102.0%) and high accuracy (RSD ≤ 4.0%), even in the presence of several analogues of HA. Such fluorescent hollow MIP microparticles hold much promise for rapid and accurate HA detection in the clinical diagnostic field.

Nano-Scaled Materials and Polymer Integration in Biosensing Tools

The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors. This review discusses the latest developments in nano-scaled materials and synthesis techniques for polymer structures and their integration into sensing applications by highlighting their various structural advantages in producing highly sensitive tools that rival bench-top instruments. The developments in material design open a new door for decentralized medicine and public protection that allows effective onsite and point-of-care diagnostics.

Study on the Absorption and Conduction Properties of Vanisulfane in Tobacco

The purposes of this study were to explore the systemic properties of vanisulfane in tobacco plant and to provide a reference for the rational use of vanisulfane in the field. After the tobacco plants were treated by hydroponics and foliar spraying, the contents of vanisulfane in root and stem leaf were detected by high-performance liquid chromatography tandem high-resolution mass spectrometry (UPLC-HRMS), and the position of vanisulfane in root and stem leaf was real-time observed through fluorescence two-photon confocal microscope. UPLC-HRMS results showed that the contents of vanisulfane in root and stem leaf gradually increased with the extension of processing time, and after 12 h treatment, the contents of vanisulfane in root and stem leaf reached the maximum levels of 31.95 and 0.215 mg/kg, respectively. In addition, fluorescence two-photon confocal microscope results showed that vanisulfane could observe in the root and stem leaf. These results showed that vanisulfane had excellent upward and downward of systemic in tobacco plants, which is helpful to guide a reference for the rational use of vanisulfane in the field.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Biological sample-compatible Au nanoparticle-containing fluorescent molecularly imprinted polymer microspheres by combining RAFT polymerization and Au-thiol chemistry

The development of biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with more functions and/or improved performance is of great importance for various bioanalytical and biomedical applications, but remains challenging. Herein,...

Fabrication of surface molecularly imprinted electrochemical sensor for the sensitive quantification of chlortetracycline with ionic liquid and MWCNT improving performance

Chlortetracycline (CTC) is a widely used broad-spectrum antibiotic, its residue likely occurs in the environment and foods, bringing some negative effects to human health. Hence the detection and quantification of CTC in environmental and food samples is relevant. Herein, a novel electrochemical sensor based on surface molecularly imprinted polymer (SMIP) was constructed for the quantitative detection of CTC. The SMIP was synthesized by using ionic liquid (IL) functionalized MWCNT (MWCNT-IL) as supporter, 1-carboxymethyl-3-vinylimidazolium bromide (IL₁) as functional monomer, CTC as template, ethylene glycol dimethyl acrylate as crosslinker, and azobisisobutyronitrile as initiator. The obtained composite IL₁-SMIP exhibited high adsorption capacity for CTC and the imprinting factor was ca. 4.1. It was found that IL played an important role in improving the property of SMIP, which was also evaluated by DFT-based calculation. The resulting sensor IL₁-SMIP/MWCNT-IL/GCE showed high selectivity, sensitivity and reproducibility. CTC could be quantified from 0.4 μM to 55 μM with a detection limit of 0.08 μM (S/N = 3) under the optimized conditions. The practical applicability of the sensor was demonstrated successfully by determining CTC in real samples.

Hybrid Molecularly Imprinted Polymers: The Future of Nanomedicine?

Molecularly imprinted polymers (MIPs) have been widely used in nanomedicine in the last few years. However, their potential is limited by their intrinsic properties resulting, for instance, in lack of control in drug release processes or complex detection for in vivo imaging. Recent attempts in creating hybrid nanomaterials combining MIPs with inorganic nanomaterials succeeded in providing a wide range of new interesting properties suitable for nanomedicine. Through this review, we aim to illustrate how hybrid molecularly imprinted polymers may improve patient care with enhanced imaging, treatments, and a combination of both.

Water-Compatible Fluorescent Molecularly Imprinted Polymers

Preparation of molecularly imprinted polymers (MIPs) capable of directly and selectively recognizing small organic analytes in aqueous samples (particularly in the undiluted complex biological samples) is described. Such water-compatible MIPs can be readily obtained by the controlled grafting of appropriate hydrophilic polymer brushes onto the MIP particle surfaces. Two types of synthetic approaches (i.e., "two-step approach" and "one-step approach") for preparing complex biological sample-compatible hydrophilic fluorescent MIP nanoparticles and their applications for direct, selective, sensitive, and accurate optosensing of an antibiotic (i.e., tetracycline (Tc)) in the undiluted pure bovine/porcine serums are presented.

Molecularly imprinted dispersive solid-phase microextraction sorbents for direct and selective drug capture from the undiluted bovine serum

The preparation of well-defined new hydrophilic molecularly imprinted polymer (MIP) microspheres and their use as the dispersive solid-phase microextraction (dSPME) sorbents for direct and selective drug (i.e., propranolol) capture from the undiluted bovine serum are described. These MIPs have surface-grafted dense poly(2-hydroxyethyl methacrylate) (PHEMA) brushes with different molecular weights and grafting densities. They were readily prepared via the facile reversible addition-fragmentation chain transfer (RAFT) coupling chemistry. Both the molecular weights and grafting densities of PHEMA brushes showed significant influence on their complex biological sample-compatibility, and only those MIPs bearing PHEMA brushes with high enough molecular weights and grafting densities could selectively recognize propranolol in the undiluted pure milk and bovine serum. In particular, they have proven to be highly versatile dSPME sorbents for directly and selectively capturing propranolol from the undiluted bovine serum with satisfactory recoveries (85.2-97.4%) and high accuracy (RSD = 2.3-3.7%), even in the presence of one analogue of propranolol. The limit of detection was 0.002 μM with a linear correlation coefficient of 0.9994 in the range of 0.01-100 μM. Excellent precision was verified by both the intraday and interday analytical results. Their good reusability was also confirmed. This work demonstrates the high potential of such hydrophilic MIP-based dSPME sorbents for rapid, accurate, and reliable drug determination in complex biological samples.

Ratiometric visual detection of tetracycline residues in milk by framework-enhanced fluorescence of gold and copper nanoclusters

We reported a novel dual-emission fluorescence probe fabricated by encapsulating both gold (AuNCs) and copper nanoclusters (CuNCs) into zeolitic imidazolate framework-8 (ZIF-8). Obtained composite (AuCuNCs@MOF) was utilized for ratiometric determination of Tetracycline (Tcy) antibiotic. Under excitation at 400 nm, the AuCuNCs@MOF composite displayed two emission peaks at 520 and 650 nm which were originated from AuNCs and CuNCs, respectively. Upon the addition of Tcy, the red emission intensity of the nanoparticles at 615 nm was significantly decreased, while the green emission at 520 nm stayed almost constant which resulted in a clear fluorescence color change from red to green under a UV lamp. The logarithm of the fluorescence ratio against the concentration of Tcy exhibited a satisfactory linear relationship from 20 to 650 nM with a detection limit (LOD) of 4.8 nM. Current probe was applied for Tcy quantification in milk samples with superior results.

Molecularly Imprinted Micelles for Fluorescent Sensing of Nonsteroidal Anti-Inflammatory Drugs (NSAIDs)

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used over-the-counter drugs and their uncontrolled disposal is a significant environmental concern. Although their fluorescent sensing is a desirable method of detection for its sensitivity and simplicity, the structural similarity of the drugs makes the design of selective sensors highly challenging. A thiourea-based fluorescent functional monomer was identified in this work to enable highly efficient synthesis of molecularly imprinted nanoparticle (MINP) sensors for NSAIDs such as Indomethacin or Tolmetin. Micromolar binding affinities were obtained in aqueous solution, with binding selectivities comparable to those reported for polyclonal antibodies. The detection limit was ~50 ng/mL in aqueous solution, and common carboxylic acids such as acetic acid, benzoic acid, and citric acid showed negligible interference.

Synthesis of a molecularly imprinted polymer using MOF-74(Ni) as matrix for selective recognition of lysozyme

A molecularly imprinted polymer and metal organic framework were combined to prepare protein imprinted material. MOF-74(Ni) was used as a matrix to prepare surface-imprinted material with lysozyme as a template and polydopamine as an imprinting polymer. MOF-74(Ni) not only provides a large surface area (150.0 m²/g) to modify the polymer layer with more recognition sites (Wt (Ni) = 42.24%), but also facilitates the immobilization of lysozyme by using the chelation between Ni²⁺ of the MOF-74(Ni) and protein. The thin polydopamine layer (10 nm) of the molecularly imprinted material (named MOF@PDA-MIP) enables surface imprinting. Benefiting from the thin polymer layer, MOF@PDA-MIP reached adsorption equilibrium within 10 min. The maximum adsorption capacity reaches 313.5 mg/g with the highest imprinting factor (IF) of 7.8. The specific recognition sites can distinguish target lysozyme from other proteins such as egg albumin (OVA), bovine serum albumin (BSA) and ribonuclease A (RNase A). The material was successfully applied to separation of lysozyme from egg white. Graphical abstract.

Molecularly Imprinted Polymers: Antibody Mimics for Bioimaging and Therapy

Molecularly imprinted polymers (MIPs) are tailor-made chemical receptors that recognize and bind target molecules with a high affinity and selectivity. MIPs came into the spotlight in 1993 when they were dubbed "antibody mimics," and ever since, they have been widely studied for the extraction or trapping of chemical pollutants, in immunoassays, and for the design of sensors. Owing to novel synthesis strategies resulting in more biocompatible MIPs in the form of soluble nanogels, these synthetic antibodies have found favor in the biomedical domain since 2010, when for the first time, they were shown to capture and eliminate a toxin in live mice. This review, covering the years 2015-2020, will first describe the rationale behind these antibody mimics, and the different synthesis methods that have been employed for the preparation of MIPs destined for in vitro and in vivo targeting and bioimaging of cancer biomarkers, an emerging and fast-growing area of MIP applications. MIPs have been synthesized for targeting and visualizing glycans and protein-based cell receptors overexpressed in certain diseases, which are well-known biomarkers for example for tumors. When loaded with drugs, the MIPs could locally kill the tumor cells, making them efficient therapeutic agents. We will end the review by reporting how MIPs themselves can act as therapeutics by inhibiting cancer growth. These works mark a new opening in the use of MIPs for antibody therapy and even immunotherapy, as materials of the future in nanomedicine.

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Tetracycline antibiotics (TCs) are a kind of commonly used antibiotics for treating infections, however, the overuse of TCs has adversely affected human health and the ecosystem. Thus, detection of TCs in water is important but challenging. In this work, a luminescent lanthanide metal-organic framework (LnMOF) sensor (1) for immediate detection of oxytetracycline (OTC) and tetracycline (TC) is developed. The sensor has high acid-base and water stability. Investigation reveals that among the 27 species of antibiotics, anions and cations under investigation, 1 shows highly selective sensing towards OTC and TC, and the detection is not disturbed by the presence of other species. The limit of detection (LOD) for OTC and TC are ultra-sensitive value of 1.95 and 2.77 nM, respectively. Investigation reveals the sensing mechanism is due to the inner filter effect. Further studies reveal that the sensor can be used in real sample monitoring. More importantly, test strips based on 1 are manufactured. They are an easy-to-use, low-cost, highly selective and sensitive sensing device for detecting OTC and TC. The sensing can be distinguished immediately and easily by the naked eyes, making it an excellent candidate to monitor OTC and TC in real use.

Well-defined hydrophilic "turn-on"-type ratiometric fluorescent molecularly imprinted polymer microspheres for direct and highly selective herbicide optosensing in the undiluted pure milks

Molecularly imprinted polymer (MIP)-based optosensing materials capable of direct, reliable, and highly selective detection of small organic analytes in complex aqueous samples hold great promise in many bioanalytical applications, but their development remains a challenging task. Addressing this issue, well-defined hydrophilic "turn-on"-type ratiometric fluorescent MIP microspheres are developed via a versatile and modular strategy based on the controlled/"living" radical polymerization method. Its general principle was demonstrated by the synthesis of red CdTe quantum dot (QD)-labeled silica particles with surface-bound atom transfer radical polymerization (ATRP)-initiating groups via the one-pot sol-gel reaction and their successive grafting of a thin fluorescent 2,4-D (an organic herbicide)-MIP layer (labeled with green organic fluorophores bearing both nitrobenzoxadiazole (NBD) and urea interacting groups) and hydrophilic poly(glyceryl monomethacrylate) (PGMMA) brushes via surface-initiated ATRP. The introduction of PGMMA brushes and rationally selected dual fluorescence labeling (i.e., red CdTe QDs being inert to 2,4-D and green NBD showing fluorescence "light-up" upon binding 2,4-D) onto MIP particles afforded them excellent complex aqueous sample-compatibility (due to their largely enhanced hydrophilicity) and analyte binding-induced "turn-on"-type ratiometric fluorescence changes, respectively. Such advanced MIP particles proved to be promising optosensing materials, which had a detection limit of 0.13 μM and showed obvious fluorescent color change upon binding different concentrations of 2,4-D in the undiluted pure milk. Moreover, they were successfully applied for direct and highly selective quantification of 2,4-D in the undiluted pure goat and bovine milks with good recoveries (97.9%-104.5%), even in the presence of several analogues of 2,4-D.

Molecularly Imprinted Nanoparticles for Biomedical Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors with tailor-made recognition sites for target molecules. Their high affinity and selectivity, excellent stability, easy preparation, and low cost make them promising substitutes to biological receptors in many applications where molecular recognition is important. In particular, spherical MIP nanoparticles (or nanoMIPs) with diameters typically below 200 nm have drawn great attention because of their high surface-area-to-volume ratio, easy removal of templates, rapid binding kinetics, good dispersion and handling ability, undemanding functionalization and surface modification, and their high compatibility with various nanodevices and in vivo biomedical applications. Recent years have witnessed significant progress made in the preparation of advanced functional nanoMIPs, which has eventually led to the rapid expansion of the MIP applications from the traditional separation and catalysis fields to the burgeoning biomedical areas. Here, a comprehensive overview of key recent advances made in the preparation of nanoMIPs and their important biomedical applications (including immunoassays, drug delivery, bioimaging, and biomimetic nanomedicine) is presented. The pros and cons of each synthetic strategy for nanoMIPs and their biomedical applications are discussed and the present challenges and future perspectives of the biomedical applications of nanoMIPs are also highlighted.

Visual Simultaneous Detection of Hepatitis A and B Viruses Based on a Multifunctional Molecularly Imprinted Fluorescence Sensor

Simultaneous detection of large viruses has been a great obstacle in the field of molecular imprinting. In this work, for the first time, a multifunctional molecularly imprinted sensor for single or simultaneous determination of hepatitis A virus (HAV) and hepatitis B virus (HBV) is provided. Visual detection was realized due to the color of green and red quantum dots that varied with the concentration of the target substance. The combination of hydrophilic monomers and metal chelation reduced the nonspecific binding and enhanced the specificity of adsorption. As a result, satisfactory selectivity and sensitivity were obtained for the detection of the two viruses, with imprinting factors of 3.70 and 3.35 for HAV and HBV, and limits of detection of 3.4 and 5.3 pmol/L, respectively, that were achieved within 20 min. The excellent recoveries during simultaneous detection and single detection modes indicate the prominent ability of the proposed sensor to detect HAV and HBV in human serum and the potential ability to simultaneously detect multiple viruses in real applications.

A novel ratiometric fluorescence probe for highly sensitive and specific detection of chlorotetracycline among tetracycline antibiotics

It is of great importance to detect chlorotetracycline (CTC) in a highly sensitive and specific way because of its wide distribution in aquaculture and animal husbandry. Herein, we propose a novel ratiometric fluorescence strategy to assay CTC by using bovine serum albumin stabilized gold nanoclusters (BSA-AuNCs). The BSA-AuNCs consisting of 25 gold atoms (Au₂₅NCs) display a red emission at 640 nm (λ_ex = 370 nm). In the presence of CTC, a new blue emission at 425 nm is emerged and its intensity dramatically increases with the addition of more the analyte; meanwhile the red emission at 640 nm shows a linear decrease reversely. However, at identical conditions neither the analogues of CTC as tetracycline (TC), oxytetracycline (OTC) or doxycycline (DC) induces similar response of BSA-AuNCs. Such interesting phenomenon is proven related to the conversion from large Au₂₅NCs to smaller nanoclusters composing 8 gold atoms (Au₈NCs), which intrinsically originate from the interaction between CTC and the ligand BSA. Therefore, a ratiometric probe is established to sensitively detect CTC in the wide range (0.2-10 μM) with a low limit of detection (LOD) at 65 nM. In addition, this strategy can also be applied to assay CTC in human serum, showing great promise for practical applications in future.

Ni2+-BSA Directional Coordination-Assisted Magnetic Molecularly Imprinted Microspheres with Enhanced Specific Rebinding to Target Proteins

Protein imprinting technology is of interest in drug delivery, biosensing, solid-phase extraction, and so forth. However, the efficient recognition and separation of proteins have remained challenging to date. Toward this, under the assistance of Ni²⁺-bovine serum albumin (BSA) directional coordination strategy, magnetic BSA-imprinted materials had been synthesized via dopamine self-polymerization on hollow Fe₃O₄@mSiO₂ microspheres (mSiO₂ referred as mesoporous silica). The well-defined imprinted microspheres possessed more satisfactory adsorption capacity (266.99 mg/g), enhanced imprinting factor (5.45), and fast adsorption saturation kinetics (40 min) for BSA, superior to many previous reports. Benefiting from the coordinate interaction between Ni²⁺ and BSA, these fabricated microspheres exhibited excellent specificity not only in individual and competitive protein rebinding samples but also in bovine serum. Combined with the directional coordination method, the magnetic-imprinted composite materials to selectively capture target proteins could provide promising potential in applications.

Recent Advances and Perspectives of Molecularly Imprinted Polymer-Based Fluorescent Sensors in Food and Environment Analysis

Molecular imprinting technology (MIT), also known as molecular template technology, is a new technology involving material chemistry, polymer chemistry, biochemistry, and other multi-disciplinary approaches. This technology is used to realize the unique recognition ability of three-dimensional crosslinked polymers, called the molecularly imprinted polymers (MIPs). MIPs demonstrate a wide range of applicability, good plasticity, stability, and high selectivity, and their internal recognition sites can be selectively combined with template molecules to achieve selective recognition. A molecularly imprinted fluorescence sensor (MIFs) incorporates fluorescent materials (fluorescein or fluorescent nanoparticles) into a molecularly imprinted polymer synthesis system and transforms the binding sites between target molecules and molecularly imprinted materials into readable fluorescence signals. This sensor demonstrates the advantages of high sensitivity and selectivity of fluorescence detection. Molecularly imprinted materials demonstrate considerable research significance and broad application prospects. They are a research hotspot in the field of food and environment safety sensing analysis. In this study, the progress in the construction and application of MIFs was reviewed with emphasis on the preparation principle, detection methods, and molecular recognition mechanism. The applications of MIFs in food and environment safety detection in recent years were summarized, and the research trends and development prospects of MIFs were discussed.

Semiconductor nanocrystal-polymer hybrid nanomaterials and their application in molecular imprinting

Quantum dots (QDs) are attractive semiconductor fluorescent nanomaterials with remarkable optical and electrical properties. The broad absorption spectra and high stability of QD transducers are advantageous for sensing and bioimaging. Molecular imprinting is a technique for manufacturing synthetic polymeric materials with a high recognition ability towards a target analyte. The high selectivity of the molecularly imprinted polymers (MIPs) is a result of the fabrication process based on the template-tailored polymerization of functional monomers. The three-dimensional cavities formed in the polymer network can serve as the recognition elements of sensors because of their specificity and stability. Appending specific molecularly imprinted layers to QDs is a promising strategy to enhance the stability, sensitivity, and selective fluorescence response of the resulting sensors. By merging the benefits of MIPs and QDs, inventive optical sensors are constructed. In this review, the recent synthetic strategies used for the fabrication of QD nanocrystals emphasizing various approaches to effective functionalization in aqueous environments are discussed followed by a detailed presentation of current advances in QD conjugated MIPs (MIP-QDs). Frontiers in manufacturing of specific imprinted layers of these nanomaterials are presented and factors affecting the specific behaviour of an MIP shell are identified. Finally, current limitations of MIP-QDs are defined and prospects are outlined to amplify the capability of MIP-QDs in future sensing.

Progress in Molecularly Imprinted Polymers for Biomedical Applications

Background:

Molecularly Imprinted Polymers (MIPs), a type of biomimetic materials have attracted considerable interest owing to their cost-effectiveness, good physiochemical stability, favorable specificity and selectivity for target analytes, and long shelf life. These materials are able to mimic natural recognition entities, including biological receptors and antibodies, providing a versatile platform to achieve the desirable functionality for various biomedical applications.

Objective:

In this review article, we introduce the most recent development of MIPs to date. We first highlight the advantages of using MIPs for a broad range of biomedical applications. We then review their various methods of synthesis along with their latest progress in biomedical applications, including biosensing, drug delivery, cell imaging and drug discovery. Lastly, the existing challenges and future perspectives of MIPs for biomedical applications are briefly discussed.

Conclusion:

We envision that MIPs may be used as potential materials for diverse biomedical applications in the near future.

Recent advances of molecularly imprinted polymer-based sensors in the detection of food safety hazard factors

With increasing economic globalization, food safety is becoming the most serious concern in the food production and distribution system. Food safety hazard factors (FSHFs) can be categorized into chemical hazards, biological hazards and physical hazards, with the detection of the former two having fascinated interdisciplinary research areas spanning chemistry, material science and biological science. Molecularly imprinted polymer (MIP) -based sensors overcome many limitations of traditional detection methods and provide opportunities for efficient, sensitive and low-cost detection using smart miniaturized equipment. With highly specific molecular recognition capacity and high stability in harsh chemical and physical conditions, MIPs have been used in sensing platforms such as electrochemical, optical and mass-sensitive sensors as promising alternatives to bio-receptors for food analysis. In this systemic review, we summarize recent advances of MIPs and MIP-based sensors, such as popular monomers, usual polymerization strategies, fresh modification materials and advanced sensing mechanisms. The applications of MIP-based sensors in FSHF detection are discussed according to sensing mechanisms, including electrochemistry, optics and mass-sensitivity. Finally, future perspectives and challenges are discussed.

Molecular Imprinting with Functional DNA

Molecular imprinting refers to templated polymerization with rationally designed monomers, and this is a general method to prepare stable and cost-effective ligands. This attractive concept however suffers from low affinity, low specificity, and limited signaling mechanisms for binding. Acrydite-modified DNA oligonucleotides can be readily copolymerized into acrylic polymers. With molecular recognition and catalytic functions, such functional DNAs are recently shown to enhance the performance of molecularly imprinted polymers (MIPs) in a few ways. First, DNA aptamers are used as macromonomers to enhance binding affinity and specificity of MIPs. Second, DNA can help produce optical signals to follow binding events. Third, imprinting can also improve the performance of catalytic DNA by enhancing its activity and specificity toward the template substrate. Finally, MIP is shown to help aptamer selection. Bulk imprinting, nanoparticle imprinting, and surface imprinting are all demonstrated with DNA. Since both DNA and synthetic polymers are cost effective and stable, their hybrid materials still possess such properties while enhancing the function of each component. This review covers recent developments on the abovementioned aspects of DNA-containing MIPs, a field just emerged in the last five years, and future research directions are discussed toward the end.

A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples

A biomimetic fluorescent nanosensor based on molecularly imprinted polymers modified with carbon dots (CDs@MIPs) has been prepared for rapid, selective and sensitive detection of alpha-fetoprotein (AFP) in clinical samples.

Well-defined biological sample-compatible molecularly imprinted polymer microspheres by combining RAFT polymerization and thiol–epoxy coupling chemistry

A versatile approach to obtaining well-defined biological sample-compatible MIP microspheres by combining RAFT polymerization and thiol–epoxy coupling chemistry is described.

Polyethyleneimine capped bimetallic Au/Pt nanoclusters are a viable fluorescent probe for specific recognition of chlortetracycline among other tetracycline antibiotics

A highly selective method has been developed for the fluorometric determination of chlortetracycline (CTC) among other tetracycline antibiotics (TCs). It is making use of fluorescent Au/Pt nanoclusters (NCs) capped with polyethyleneimine (Au/PtNCs@PEI). The nanoprobe, with a green emission peaking at 512 nm, was synthesized by an environmentally friendly hydrothermal method. The capped NCs have a large Stokes shift (∼150 nm), are insensitive to extreme pH values and high ionic strength, and are excellently photostable under UV irradiation. In the presence of CTC, the fluorescence of the capped NCs is quenched due to aggregation. The effect is also found for tetracycline, oxytetracycline and doxycycline. This shows that sensitive but non-selective detection of such TCs is possible. However, CTC is specifically complexed by Al(III) ions, and this generates a strong fluorescence peaking at 520 nm even though the fluorescence of the capped NCs is fully quenched. Obviously, the effects are caused by CTC only, and this enables CTC to be specifically recognized by an "on-off-on" strategy. Fluorescence increases linearly in the 0.5 to 10 μM CTC concentration range, and the limit of detection is 0.35 μM. The method was successfully applied to the determination of CTC in (spiked) milk, and the recoveries suggest that this fluorescent probe is an effective tool for detecting CTC in foodstuff. Graphical abstract Schematic illustration and photographic images of the luminescence quenching response of Au/Pt nanoclusters (Au/PtNCs) toward chlortetracycline (CTC) (from on to off), and then the recovery upon Al³⁺ addition (from off to on).

Hydrophilic Multitemplate Molecularly Imprinted Biopolymers Based on a Green Synthesis Strategy for Determination of B-Family Vitamins

A novel green synthesis strategy was proposed for preparation of multitemplate molecularly imprinted biopolymers (mt-MIBP) in aqueous media with less consumption of organic solvents, which were subsequently used as sorbents of ultrasound-assisted dispersive solid-phase extraction (d-SPE) for simultaneous recognition and efficient separation of B-family vitamins in juice samples, followed by high performance liquid chromatography (HPLC) determination. The obtained mt-MIBP was fully characterized by SEM, FT-IR, TEM, and BET. It offered high binding capacity, good selectivity, and fast dynamics toward all the templates. Involved parameters in the d-SPE efficiency such as mt-MIBP mass, sonication time, and eluting/washing solvents' types and volumes were concurrently investigated by central composite design with rapidity and reliability. Under the optimum conditions, the developed mt-MIBP-d-SPE-HPLC method exhibited wide linear range, low limits of detection and quantification (LOQs) within 1.2-5.5 μg L^-1 and 4.0-18.4 μg L^-1, respectively, and appropriate repeatability (relative standard deviation values below 4.2%, n = 4). The high selectivity of this method makes it suitable for successful monitoring of vitamins in juice samples with satisfactory recoveries of 75.8-92.7%, 81.1-92.5%, and 84.7-93.8% for vitamins riboflavin (B₂), nicotinamide (B₃), and pyridoxine (B₆), respectively. The present study implied highly promising perspectives of water-compatible eco-friendly mt-MIBP for highly effective multiresidue analysis in complicated matrixes.