Efficiency Enhancement of Quantum Dot Sensitized TiO2/ZnO Nanorod Arrays Solar Cells by Plasmonic Ag Nanoparticles

Visible light-driven sliver-modified titanium dioxide / bismuth molybdenum oxide with rapid interfacial charge-transfer for dual highly efficient photocatalytic degradation and disinfection

Enhancing interfacial charge transfer is a promising approach to improve the efficiency of photocatalysts. This research effectively exploited an Ag-modified Z-scheme TiO2/Bi2MoO6 heterojunction for photocatalytic degradation and disinfection under visible light. The catalyst was fabricated using simple hydrothermal and photo-deposition methods, and the characterization outcomes revealed that a built-in electric field (BIEF) was generated in the TiO2/Bi2MoO6 heterojunctions, which significantly promotes the separation of photogenerated carriers and increases light absorption efficiency. Besides, the theoretical calculation demonstrated that electron migration between TiO2 and Ag resulted in a strong coupling on the surface, which serves as the foundation for driving photoelectric charge transfer. Furthermore, the TiO2/Bi2MoO6/Ag-45 displayed 459% and 512% higher degradation efficiency of tetracycline hydrochloride (TC-HCl) and ciprofloxacin (CIP) after 100 min compared to pristine TiO2. Moreover, the complexes wholly inactivated gram-negative Escherichia coli (E. coli) and significantly inhibited the growth of gram-positive Staphylococcus albus (S. albus) after 200 min. Additionally, we have deduced the potential degradation pathways of TC-HCl and CIP and photocatalytic mechanisms. The research results provide an idea to solve the problems of limited light absorption range and rapid carrier combination speed of traditional photocatalytic materials, which is expected to be applied in the field of actual wastewater treatment.

Balancing Near-Field Enhancement and Hot Carrier Injection: Plasmonic Photocatalysis in Energy-Transfer Cascade Assemblies

Photocatalysis stands as a very promising alternative to photovoltaics in exploiting solar energy and storing it in chemical products through a single-step process. A central obstacle to its broad implementation is its low conversion efficiency, motivating research in different fields to bring about a breakthrough in this technology. Using plasmonic materials to photosensitize traditional semiconductor photocatalysts is a popular strategy whose full potential is yet to be fully exploited. In this work, we use CdS quantum dots as a bridge system, reaping energy from Au nanostructures and delivering it to TiO2 nanoparticles serving as catalytic centers. The quantum dots can do this by becoming an intermediate step in a charge-transfer cascade initiated in the plasmonic system or by creating an electron-hole pair at an improved rate due to their interaction with the enhanced near-field created by the plasmonic nanoparticles. Our results show a significant acceleration in the reaction upon combining these elements in hybrid colloidal photocatalysts that promote the role of the near-field enhancement effect, and we show how to engineer complexes exploiting this approach. In doing so, we also explore the complex interplay between the different mechanisms involved in the photocatalytic process, highlighting the importance of the Au nanoparticles' morphology in their photosensitizing capabilities.

Vertically Aligned Nanowires and Quantum Dots: Promises and Results in Light Energy Harvesting

The synthesis of crystals with a high surface-to-volume ratio is essential for innovative, high-performance electronic devices and sensors. The easiest way to achieve this in integrated devices with electronic circuits is through the synthesis of high-aspect-ratio nanowires aligned vertically to the substrate surface. Such surface structuring is widely employed for the fabrication of photoanodes for solar cells, either combined with semiconducting quantum dots or metal halide perovskites. In this review, we focus on wet chemistry recipes for the growth of vertically aligned nanowires and technologies for their surface functionalization with quantum dots, highlighting the procedures that yield the best results in photoconversion efficiencies on rigid and flexible substrates. We also discuss the effectiveness of their implementation. Among the three main materials used for the fabrication of nanowire-quantum dot solar cells, ZnO is the most promising, particularly due to its piezo-phototronic effects. Techniques for functionalizing the surfaces of nanowires with quantum dots still need to be refined to be effective in covering the surface and practical to implement. The best results have been obtained from slow multi-step local drop casting. It is promising that good efficiencies have been achieved with both environmentally toxic lead-containing quantum dots and environmentally friendly zinc selenide.

Black TiO2-Based Dual Photoanodes Boost the Efficiency of Quantum Dot-Sensitized Solar Cells to 11.7

Quantum dot-sensitized solar cells (QDSSC) have been regarded as one of the most promising candidates for effective utilization of solar energy, but its power conversion efficiency (PCE) is still far from meeting expectations. One of the most important bottlenecks is the limited collection efficiency of photogenerated electrons in the photoanodes. Herein, we design QDSSCs with a dual-photoanode architecture, and assemble the dual photoanodes with black TiO2 nanoparticles (NPs), which were processed by a femtosecond laser in the filamentation regime, and common CdS/CdSe QD sensitizers. A maximum PCE of 11.7% with a short circuit current density of 50.3 mA/cm2 is unambiguously achieved. We reveal both experimentally and theoretically that the enhanced PCE is mainly attributed to the improved light harvesting of black TiO2 due to the black TiO2 shells formed on white TiO2 NPs.

One-pot solution combustion synthesis of porous spherical-shaped magnesium zinc binary oxide for efficient fluoride removal and photocatalytic degradation of methylene blue and Congo red dye

A novel porous spherical-shaped magnesium zinc binary oxide (MZO) was successfully prepared for the first time using a chemical process for fluoride removal and photocatalytic methylene blue (MB) and Congo red (CR) dye degradation. XRD, FESEM, and TEM were studied for phase formation, topographic, crystallographic, and detailed structural information. The surface charge and optical properties of the adsorbent were studied by zeta potential and photoluminescence spectra. The synthesized nano-adsorbents showed high fluoride removal capacity (43.10 mg/g) and photocatalytic activity with a degradation efficiency of 97.83% and 78.40% for MB and CR, respectively. The adsorption was strongly pH-dependent and worked well in the range 6-9. The kinetic studies were performed for both fluoride removal and dye degradation and were found to follow pseudo-second-order and first-order rate law, respectively. The samples were found to be extremely reusable and selective for fluoride removal in presence of co-ions such as NO₃^-, SO₄^2-, and Cl^-. The basic fluoride adsorption process of the samples can be related to ion exchange and electrostatic interactions, according to XPS and FTIR data. The detailed mechanistic study of photocatalytic dye degradation showed that the reaction occurred via OH radicals. Thus, MZO could be considered an effective and quick adsorbent for water purification in fluoride-containing groundwater and industrial dye wastewater.

Localized surface plasmon resonance enhanced visible-light-driven CO2 photoreduction in Cu nanoparticle loaded ZnInS solid solutions

Visible-light-driven photocatalysts have shown tremendous prospects in solving the energy crisis and environmental problems, thanks to their wide spectral response and high quantum efficiency. Several strategies including the expansion of visible light response and the improvement of solar energy utilization and photocatalytic quantum efficiency via more effective separation of photogenerated carriers are the current focuses of research that direct the design and fabrication of viable photocatalysts. Herein, a series of composite photocatalysts assembled from plasmonic Cu nanoparticles (NPs) and Zn3In2S6 (ZIS) solid solutions were synthesized by means of a simple solvothermal method. In comparison with the pristine ZIS semiconductor, Cu NP loaded ZIS solid solutions showed greatly enhanced photocatalytic activity, selectivity and stability towards CO2 reduction under visible irradiation. Of note was that the optimized ZIS-Cu2 exhibited an enhanced CH4 production rate of ca. 292 μL g-1 h-1 and a selectivity of ca. 71.1%, which were among the highest numbers reported hitherto. The localized surface plasmon resonance (LSPR) effect, shown by surface Cu NPs, was believed to play a critical role in the enhanced CO2 photoreduction efficiency. More importantly, the introduction of plasmonic Cu NPs could restrain the recombination of photogenerated electron-hole pairs and promote the migration of photogenerated electrons to better participate in the photocatalytic CO2 reduction in the presence of water vapor. This work thus provides a facile means to design robust and flexible composite photocatalysts for visible-light-driven CO2 photoreduction with high efficiency.

TiO2 Passivation Layer on ZnO Hollow Microspheres for Quantum Dots Sensitized Solar Cells with Improved Light Harvesting and Electron Collection

Light harvesting and electron recombination are essential factors that influence photovoltaic performance of quantum dots sensitized solar cells (QDSSCs). ZnO hollow microspheres (HMS) as architectures in QDSSCs are beneficial in improving light scattering, facilitating the enhancement of light harvesting efficiency. However, this advantage is greatly weakened by defects located at the surface of ZnO HMS. Therefore, we prepared a composite hollow microsphere structure consisting of ZnO HMS coated by TiO₂ layer that is obtained by immersing ZnO HMS architectures in TiCl₄ aqueous solution. This TiO₂-passivated ZnO HMS architecture is designed to yield good light harvesting, reduced charge recombination, and longer electron lifetime. As a result, the power conversion efficiency (PCE) of QDSSC reaches to 3.16% with an optimal thickness of TiO₂ passivation layer, which is much higher when compared to 1.54% for QDSSC based on bare ZnO HMS.

Detection of several quinolone antibiotic residues in water based on Ag-TiO2 SERS strategy

Herein, a surface-enhanced Raman scattering (SERS) strategy based on semiconducting substrate was exploited for detection of several antibiotic residues both in ultrapure water system and in actual water system. The as-prepared Ag-TiO₂ (Ag synchronously deposited and doped TiO₂) nanoparticle SERS-active substrate can achieve high sensitive SERS detection for difloxacin hydrochloride, ciprofloxacin, enrofloxacin, danofloxacin and enoxacin (five widely used quinolone antibiotics) in actual water samples, and the detection limits are as low as 4.36 × 10^-12, 7.08 × 10^-11, 3.94 × 10^-11, 3.16 × 10^-11 and 3.15 × 10^-10 mol/L, respectively. These detection limits are far below the maximum of residue limit (3.01 × 10^-7 mol/L) stipulated by the European Union. And, the desirable quantitative relationships can be obtained in a wide concentration range. The recoveries of five antibiotic residues from spiked actual water samples are found to be more than 80.8% with the relative standard deviations between 2.1% and 4.7%. Even, the proposed SERS method can accurately distinguish every antibiotic species from a mixed antibiotic residue sample with multiple antibiotics. And, Ag-TiO₂ nanoparticles can also serve as an efficient photocatalyst for photocatalytic degradation of these antibiotic residues, which provides a multi-functional platform for synchronous determination and degradation of antibiotic residues in real environment.

A disulfur ligand stabilization approach to construct a silver(i)-cluster-based porous framework as a sensitive SERS substrate

An atomically-precise silver(i)-cluster-based three-dimensional (3D) framework (UJN-1) stabilized by a ditiocarb (diethyldithiocarbamate) ligand has been unveiled for the first time by self-assembly. UJN-1 is composed of both Ag₉ clusters and Ag₅ subunits, of which the Ag₉ clusters are bonded with Ag₅ subunits by sharing the ditiocarb ligand to form a microporous 3,4-connected topological framework. The chemically reduced nano-sized derivative of UJN-1 exhibits highly sensitive surface enhanced Raman scattering (SERS) towards 4-mercaptobenzoic acid (4-MBA) signal molecules, which is ascribed to the porosity as well as the distribution of abundant crystalline Ag⁰ active sites. This work sheds light on a new bottom-up approach to construct SERS-active silver(i)-cluster-based 3D materials by disulfur ligand stabilization.

ZnO nanowires for solar cells: a comprehensive review

As an abundant and non-toxic wide band gap semiconductor with a high electron mobility, ZnO in the form of nanowires (NWs) has emerged as an important electron transporting material in a vast number of nanostructured solar cells. ZnO NWs are grown by low-cost chemical deposition techniques and their integration into solar cells presents, in principle, significant advantages including efficient optical absorption through light trapping phenomena and enhanced charge carrier separation and collection. However, they also raise some significant issues related to the control of the interface properties and to the technological integration. The present review is intended to report a detailed analysis of the state-of-the-art of all types of nanostructured solar cells integrating ZnO NWs, including extremely thin absorber solar cells, quantum dot solar cells, dye-sensitized solar cells, organic and hybrid solar cells, as well as halide perovskite-based solar cells.

Efficiency Enhancement of Solid-State CuInS2 Quantum Dot-Sensitized Solar Cells by Improving the Charge Recombination

Copper indium sulfide quantum dots (CuInS₂ QDs) were incorporated into a nanocrystalline TiO₂ film by using spin coating-assisted successive ionic layer adsorption and reaction process to fabricate CuInS₂ QD-sensitized TiO₂ photoelectrodes for the solid-state quantum dot-sensitized solar cell (QDSSC) applications. The result shows that the photovoltaic performance of solar cell is extremely dependent on the number of cycles, which has an appreciable impact on the coverage ratio of CuInS₂ on the surface of TiO₂ and the density of surface defect states. In the following high-temperature annealing process, it is found that annealing TiO₂/CuInS₂ photoelectrode at a suitable temperature would be beneficial for decreasing the charge recombination and accelerating the charge transport. After annealing at 400 °C, a significantly enhanced photovoltaic properties of solid-state CuInS₂ QDSSCs are obtained, achieving the power conversion efficiency (PCE) of 3.13%, along with an open-circuit voltage (V_OC) of 0.68 V, a short-circuit photocurrent density (J_SC) of 11.33 mA cm^-2, and a fill factor (FF) of 0.41. The enhancement in the performance of solar cells is mainly ascribed to the suppression of charge recombination and the promotion of the electron transfer after annealing.

Rational Design of Photoelectrodes with Rapid Charge Transport for Photoelectrochemical Applications

Photoelectrode materials are the heart of photoelectrochemical (PEC) cells, which hold great promise to address global energy and environmental issues by converting solar energy into electricity or chemical fuels. In recent decades, significant research efforts have been devoted to the design and construction of photoelectrodes for the efficient generation and utilization of charge carriers to boost PEC performance. Herein, insights from a literature study on the relationship between the architecture and charge dynamics of photoelectrodes are presented. After briefly introducing the fundamental theories of charge dynamics in nanostructured photoelectrodes, the development of photoelectrode design in 1D polycrystalline nanotube arrays, 1D single-crystalline nanowire arrays, and hierarchical and mesoporous nanowire arrays is reviewed with a focus on the interplay between architecture and charge transport properties. For each design, commonly used synthetic approaches and the corresponding charge transport properties are discussed. Subsequently, the applications of these photoelectrodes in PEC systems are summarized. In conclusion, future challenges in the rational design of photoelectrode architecture are presented. The basic relationships between the architectures and charge dynamics of photoelectrode materials discussed here are expected to provide pertinent guidance and a reference for future advanced material design targeting improved light energy conversion systems.

Plasmon Ag-Promoted Solar-Thermal Conversion on Floating Carbon Cloth for Seawater Desalination and Sewage Disposal

Using solar energy to achieve seawater desalination and sewage disposal has received tremendous attention for its potential possibility to produce clean freshwater. However, the low solar-thermal conversion efficiency for solar absorber materials obstacles their practical applications. Herein, Ag nanoparticles modified floating carbon cloth (ANCC) are first synthesized via wet impregnation, photoreduction, and low-temperature drying strategy, which could float on the water and absorb the solar energy efficiently. It is worth noting that vaporization rate of ANCC with a high wide-spectrum absorption (92.39%) for the entire range of optical spectrum (200-2500 nm) is up to 1.36 kg h^-1 m^-2 under AM 1.5, which corresponds to solar-thermal conversion efficiency of ∼92.82% with superior seawater desalination and sewage disposal performance. Plasmon Ag promotes the conversion efficiency obviously compared to the pristine carbon cloth because the surface plasmon resonance effect could increase the local temperature greatly. After the desalination, the ion concentrations (Mg²⁺, K⁺, Ca²⁺, and Na⁺ ions) in water are far below the limit of drinking water. Such high-performance floating ANCC material may offer a feasible and paradigm strategy to manage the global water contamination and freshwater shortage problem.

Plasmon enhanced photocatalytic and antimicrobial activities of Ag-TiO2 nanocomposites under visible light irradiation prepared by DBD cold plasma treatment

Silver nanoparticles (Ag NPs) have been deposited on powder P25 by a novel two-step method involving a precipitation reaction and atmospheric pressure dielectric barrier discharge (DBD) cold plasma treatment without the use of any environmentally and biologically hazardous reducing agents. The silver precursor is formed in the processing of precipitation reaction and then completely reduced to the metallic state by atmospheric pressure DBD cold plasma treatment as proved by X-ray photoelectron spectroscopy, UV-Visible absorption spectra and HRTEM analyses. TEM images indicate that the Ag NPs with average diameter of 3.7 nm were deposited on powder P25 with high dispersion although no reducing agents, stabilizers or surfactants were used. The prepared products show remarkable improvement for methylene blue (MB) photodegradation and effective inhibition of bacterias against Escherichia coli and Staphylococcus aureus.

A bulk adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanoparticles

We describe a bulk adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanoparticles. In this method, we apply a many-body scaling function (in similar manner as in the environment-modified total energy based tight-binding method) to the DFT-derived diatomic AO interaction potentials (like in the conventional orbital-based density-functional tight binding approach) strictly according to atomic valences acquired naturally in a bulk structure. This modification, (a) facilitates all atom orbital-based electronic structure calculations of charge carrier dynamics in nanoscale structures with a molecular acceptor, and (b) allows to closely match high-level density functional calculation data (previously adjusted to the available experimental findings) for bulk structures. To advance practical application of the BA-LCAO approach we parameterize the Hamiltonian of wurtzite CdSe by fitting its band structure to a high-level DFT reference, corrected for experimentally measured band edges. Here, unlike in conventional DFTB approach, we: (1) use hydrogen-like AOs for the basis as exact atomic eigenfunctions, while orbital energies of which are taken from experimentally measured ionization potentials, and (2) parameterize the many-body scaling functions rather than the atomic wavefunctions. Development of this approach and parameters is guided by our goals to devise a method capable of simultaneously treating the problems of (i) interfacial electron/hole transfer between finite, variable size nanoparticles and electron scavenging molecules, and (ii) high-energy electronic transitions (Auger transitions) that mediate multi-exciton decay in quantum dots. Electronic structure results are described for CdSe quantum dots of various sizes. © 2018 Wiley Periodicals, Inc.

Insights into the enhanced photoelectrochemical performance of hydrothermally controlled hematite nanostructures for proficient solar water oxidation

A controlled hydrothermal reaction time showed an improvement in the PEC performance of 1D α-Fe₂O₃ nanorods due to an optimum aspect ratio and Sn⁴⁺ diffusion.

Advanced bi-functional CoPi co-catalyst-decorated g-C3N4 nanosheets coupled with ZnO nanorod arrays as integrated photoanodes

In this work, a CoPi-decorated type II heterojunction composed of one-dimensional (1D) ZnO nanorod arrays (NRAs) coated with two-dimensional (2D) carbon nitride (g-C₃N₄) was successfully prepared and used as photoanode.

TiO2 surfaces self-doped with Ag nanoparticles exhibit efficient CO2 photoreduction under visible light

Doping with intrinsic defects to enhance the photocatalytic performance of TiO₂ has recently attracted attention from many researchers. In this report, we developed an original approach to realise stabilized surface doping using intrinsic defects with the loading of Ag nanoparticles (AgNPs) on the surface. Herein, atmospheric pressure dielectric barrier discharge (DBD) cold plasma was used to help load the AgNPs, and ethanol treatment was used to introduce intrinsic defects (oxygen vacancies and Ti³⁺) on the surface of materials. This method avoids environmentally hazardous reducing regents and is undertaken under atmospheric pressure, thus reducing energy-consuming and complex operation. We combine the advantages of noble metal nanoparticles and surface doping to enhance the photocatalytic performance under the visible light. The characterization of the materials indicates that the loading of AgNPs and introduction of intrinsic defects can change the electronic structure of the composite material and improve its efficiency. The samples show significant enhancement in CO₂ photoreduction to obtain CO and CH₄, with yields reaching 141 μmol m⁻² and 11.7 μmol m⁻², respectively. The formation mechanism of the method for TiO₂ modification and CO₂ reduction is also discussed.

It is a simple process of realizing Ag nanoparticles deposition and TiO₂ self-doping, which can promote the photocatalytic performance.

Visible light-enhanced thermal decomposition performance of ammonium perchlorate with a metal–organic framework-derived Ag-embedded porous ZnO nanocomposite

An Ag-embedded porous ZnO nanocomposite (Ag–ZnO NC) fabricated using an MOF exhibits high catalytic activity for the thermal decomposition of AP under the assistance of visible light.

A Ag synchronously deposited and doped TiO2 hybrid as an ultrasensitive SERS substrate: a multifunctional platform for SERS detection and photocatalytic degradation

We proposed a Ag synchronously deposited and doped TiO₂ hybrid as a dual-function platform for ultrasensitive SERS detection and efficient photocatalytic degradation.

Surface Modification of Perfect and Hydroxylated TiO2 Rutile (110) and Anatase (101) with Chromium Oxide Nanoclusters

We use first-principles density functional theory calculations to analyze the effect of chromia nanocluster modification on TiO₂ rutile (110) and anatase (101) surfaces, in which both dry/perfect and wet/hydroxylated TiO₂ surfaces are considered. We show that the adsorption of chromia nanoclusters on both surfaces is favorable and results in a reduction of the energy gap due to a valence band upshift. A simple model of the photoexcited state confirms this red shift and shows that photoexcited electrons and holes will localize on the chromia nanocluster. The oxidation states of the cations show that Ti³⁺, Cr⁴⁺, and Cr²⁺ (with no Cr⁶⁺) can be present. To probe potential reactivity, the energy of oxygen vacancy formation is shown to be significantly reduced compared to that of pure TiO₂ and chromia. Finally, we show that inclusion of water on the TiO₂ surface, to begin inclusion of environment effects, has no notable effect on the energy gap or oxygen vacancy formation. These results help us to understand earlier experimental work on chromia-modified anatase TiO₂ and demonstrate that chromia-modified TiO₂ presents an interesting composite system for photocatalysis.

An enhanced degree of charge transfer in dye-sensitized solar cells with a ZnO-TiO2/N3/Ag structure as revealed by surface-enhanced Raman scattering

A number of recent studies have focused on improving the performance of dye-sensitized solar cells (DSSCs). Cells with a ZnO-TiO₂/N3/Ag structure have attracted particular attention because of their excellent power conversion efficiencies. Using a dendritic crystal ZnO-TiO₂ composite semiconductor and Ag in conjunction leads to different charge-transfer (CT) processes, and this is the main theoretical basis for the improvement of DSSC performances. Thus, in the present study, TiO₂/N3, ZnO/N3, ZnO-TiO₂/N3, TiO₂/N3/Ag, ZnO/N3/Ag, and ZnO-TiO₂/N3/Ag assemblies have been fabricated and their CT processes have been monitored by using surface-enhanced Raman scattering (SERS) spectra, with particular focus on the differences caused by the synergistic effect of the ZnO-TiO₂ component. The dye loading capacity of the dendritic crystal ZnO-TiO₂ is much larger than that of TiO₂. There are extra enhancements in the SERS intensity and degree of CT (ρ_CT) in ZnO-TiO₂/N3 compared to ZnO + TiO₂/N3 (based on a simulation curve for the physically mixed TiO₂ and ZnO semiconductors) with 476.5 nm excitation due to the synergistic effect of the ZnO-TiO₂ component. And these enhancements in ZnO-TiO₂/N3/Ag compared to ZnO + TiO₂/N3/Ag appear with 476.5 and 532 nm excitation, which are particularly large with 532 nm excitation. Accordingly, the participation of Ag in this synergistic effect can reduce its energy threshold, which will make it easier to appear. Finally, to rationalize these extra enhancements, the models describing the CT mechanism have been proposed. Thus, the use of the dendritic crystal ZnO-TiO₂ composite semiconductor in the semiconductor/N3/Ag system can improve the adsorption capacity of N3 compared to that with TiO₂. Meanwhile, the synergistic effect of ZnO-TiO₂ and Ag can promote the CT process, demonstrating that ZnO-TiO₂/N3/Ag is an excellent structure for DSSCs.

Control of Multiple Exciton Generation and Electron-Phonon Coupling by Interior Nanospace in Hyperstructured Quantum Dot Superlattice

The possibility of precisely manipulating interior nanospace, which can be adjusted by ligand-attaching down to the subnanometer regime, in a hyperstructured quantum dot (QD) superlattice (QDSL) induces a new kind of collective resonant coupling among QDs and opens up new opportunities for developing advanced optoelectric and photovoltaic devices. Here, we report the first real-time dynamics simulations of the multiple exciton generation (MEG) in one-, two-, and three-dimensional (1D, 2D, and 3D) hyperstructured H-passivated Si QDSLs, accounting for thermally fluctuating band energies and phonon dynamics obtained by finite-temperature ab initio molecular dynamics simulations. We computationally demonstrated that the MEG was significantly accelerated, especially in the 3D QDSL compared to the 1D and 2D QDSLs. The MEG acceleration in the 3D QDSL was almost 1.9 times the isolated QD case. The dimension-dependent MEG acceleration was attributed not only to the static density of states but also to the dynamical electron-phonon couplings depending on the dimensionality of the hyperstructured QDSL, which is effectively controlled by the interior nanospace. Such dimension-dependent modifications originated from the short-range quantum resonance among component QDs and were intrinsic to the hyperstructured QDSL. We propose that photoexcited dynamics including the MEG process can be effectively controlled by only manipulating the interior nanospace of the hyperstructured QDSL without changing component QD size, shape, compositions, ligand, etc.