Exploiting p-Type Delayed Fluorescence in Hybrid White OLEDs: Breaking the Trade-off between High Device Efficiency and Long Lifetime

Deep-Blue Triplet-Triplet Annihilation Organic Light-Emitting Diode (CIEy ≈ 0.05) Using Tetraphenylimidazole and Benzonitrile Functionalized Anthracene/Chrysene Emitters

Herein, new deep-blue triplet-triplet annihilation (TTA) molecules, namely 4-(10-(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)anthracen-9-yl)benzonitrile (TPIAnCN) and 4-(12-(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)chrysen-6-yl)benzonitrile (TPIChCN), are designed, synthesized, and investigated as emitters for organic light-emitting diodes (OLED). TPIAnCN and TPIChCN are composed of polyaromatic hydrocarbons of anthracene (An) and chrysene (Ch) as the cores functionalized with tetraphenylimidazole (TPI) and benzonitrile (CN) moieties, respectively. The experimental and theoretical results verify their excellent thermal properties, photophysical properties, as well as electrochemical properties. Particularly, their emissions are in the deep blue region, with TTA emissions being observed in their thin films. By utilization of these molecules as emitters, deep blue TTA OLEDs with CIE coordinates of (0.15, 0.05), high external quantum efficiency of 6.84%, and high exciton utilization efficiency (ηs) of 48% were fabricated. This result manifests the potential use of chrysene as an alternate building block to formulate new TTA molecules for accomplishing high-performance TTA OLEDs.

Suppressing singlet-triplet annihilation processes to achieve highly efficient deep-blue AIE-based OLEDs

Aggregation-induced emission (AIE) materials are attractive for the fabrication of high efficiency organic light-emitting diodes (OLEDs) by harnessing "hot excitons" from the high-lying triplet exciton states (T_n, n ≥ 2) and high photoluminescence (PL) quantum efficiency in solid films. However, the electroluminescence (EL) efficiency of most AIE-based OLEDs does not meet our expectation due to some unrevealed exciton loss processes. Herein, we further enhance the efficiency of blue AIE-based OLEDs, and find experimentally and theoretically that the serious exciton loss is caused by the quenching of radiative singlet excitons and long-lived triplet excitons [singlet-triplet annihilation (STA)]. In order to suppress the STA process, 1-(2,5-dimethyl-4-(1-pyrenyl)phenyl)pyrene (DMPPP) with triplet-triplet annihilation up-conversion was doped in two AIE emitters to reduce the triplet excitons on the lowest triplet excited state (T₁) of AIE molecules. It can be seen that the external quantum efficiency (EQE) of the resulting blue OLEDs was enhanced to 11.8% with CIE coordinates of (0.15, 0.07) and a negligible efficiency roll-off, realizing the efficiency breakthrough of deep-blue AIE-based OLEDs. This work establishes a physical insight in revealing the exciton loss processes and the fabrication of high-performance AIE-based OLEDs.

Highly efficient and stable deep-blue OLEDs based on narrowband emitters featuring an orthogonal spiro-configured indolo[3,2,1-de]acridine structure

High-efficiency and stable deep-blue bottom-emitting organic light-emitting diodes with Commission Internationale de l'Eclairage y coordinates (CIE y s) < 0.08 remain exclusive in the literature owing to the high excited-state energy of the emitters. Here, we propose the utilization of narrowband emitters to lower the excited-state energy for stable deep-blue devices by taking advantage of their high color purity. Two proof-of-concept deep-blue emitters with nitrogen-containing spiro-configured polycyclic frameworks are thereafter developed to introduce a multi-resonance effect for narrow emissions and sterically orthogonal configurations for alleviated molecular interactions. Both emitters show bright ultrapure deep-blue emissions with an extremely small full-width-at-half-maxima of only 18-19 nm, which can be maintained even in heavily doped films. Small CIE y s of 0.054 and 0.066 are therefore measured from the corresponding electroluminescence devices with peak energies of only 2.77 eV (448 nm) and 2.74 eV (453 nm), accounting for the remarkably long LT80s (lifetime to 80% of the initial luminance) of 18 900 and 43 470 hours at 100 cd m-2, respectively. Furthermore, by adopting a thermally activated delayed fluorescence sensitizer, impressive maximum external quantum efficiencies of 25% and 31% are recorded respectively, representing state-of-the-art performances for deep-blue devices.

Approaches for Long Lifetime Organic Light Emitting Diodes

Organic light emitting diodes (OLEDs) have been well known for their potential usage in the lighting and display industry. The device efficiency and lifetime have improved considerably in the last three decades. However, for commercial applications, operational lifetime still lies as one of the looming challenges. In this review paper, an in-depth description of the various factors which affect OLED lifetime, and the related solutions is attempted to be consolidated. Notably, all the known intrinsic and extrinsic degradation phenomena and failure mechanisms, which include the presence of dark spot, high heat during device operation, substrate fracture, downgrading luminance, moisture attack, oxidation, corrosion, electron induced migrations, photochemical degradation, electrochemical degradation, electric breakdown, thermomechanical failures, thermal breakdown/degradation, and presence of impurities within the materials and evaporator chamber are reviewed. Light is also shed on the materials and device structures which are developed in order to obtain along with developed materials and device structures to obtain stable devices. It is believed that the theme of this report, summarizing the knowledge of mechanisms allied with OLED degradation, would be contributory in developing better-quality OLED materials and, accordingly, longer lifespan devices.

Device Engineering for All-Inorganic Perovskite Light-Emitting Diodes

Recently, all-inorganic perovskite light-emitting diodes (PeLEDs) have attracted both academic and industrial interest thanks to their outstanding properties, such as high efficiency, bright luminance, excellent color purity, low cost and potentially good operational stability. Apart from the design and treatment of all-inorganic emitters, the device engineering is another significant factor to guarantee the high performance. In this review, we have summarized the state-of-the-art concepts for device engineering in all-inorganic PeLEDs, where the charge injection, transport, balance and leakage play a critical role in the performance. First, we have described the fundamental concepts of all-inorganic PeLEDs. Then, we have introduced the enhancement of device engineering in all-inorganic PeLEDs. Particularly, we have comprehensively highlighted the emergence of all-inorganic PeLEDs, strategies to improve the hole injection, approaches to enhance the electron injection, schemes to increase the charge balance and methods to decrease the charge leakage. Finally, we have clarified the issues and ways to further enhance the performance of all-inorganic PeLEDs.

Design of efficient thermally activated delayed fluorescence blue host for high performance solution-processed hybrid white organic light emitting diodes

Developing a solution-processible blue thermally activated delayed fluorescence (TADF) emitter for hybrid white organic light emitting diodes (WOLEDs) is still a challenge. In this work, two TADF blue emitters are designed and synthesized to explore a common strategy to qualify the small molecular TADF material as a solution-processible blue host. Systematic studies find that the molecular encapsulation by introducing unconjugated carbazoles as steric shields not only keeps the intrinsic TADF feature unchanged, but also effectively suppress the intermolecular interaction induced exciton quenching, which makes the material more efficient for solution-processing. The optimized solution-processed hybrid WOLEDs based on the encapsulated TADF blue host realized a highly efficient device performance with a maximum current efficiency (CE), power efficiency (PE) and external quantum efficiency (EQE) of 45.6 cd A-1, 40.9 lm W-1 and 17.0%, respectively, which are three times higher in device efficiency and twenty times higher in device lifetime than the corresponding device with an unencapsulated TADF blue host. Furthermore, the obtained device exhibits a high electroluminescence (EL) above 20 000 cd m-2 and a stable EL spectrum with nearly unchanged Commission International de L'Eclairage (CIE) coordinate at a wide range of applied voltages. These results clearly demonstrate that the molecular encapsulation of the TADF blue host is a superior and promising strategy to achieve high performance and color stable solution-processed hybrid WOLEDs.

Emergence of Flexible White Organic Light-Emitting Diodes

Flexible white organic light-emitting diodes (FWOLEDs) have considerable potential to meet the rapidly growing requirements of display and lighting commercialization. To achieve high-performance FWOLEDs, (i) the selection of effective flexible substrates, (ii) the use of transparent conducting electrodes, (iii) the introduction of efficient device architectures, and iv) the exploitation of advanced outcoupling techniques are necessary. In this review, recent state-of-the-art strategies to develop FWOLEDs have been summarized. Firstly, the fundamental concepts of FWOLEDs have been described. Then, the primary approaches to realize FWOLEDs have been introduced. Particularly, the effects of flexible substrates, conducting electrodes, device architectures, and outcoupling techniques in FWOLEDs have been comprehensively highlighted. Finally, issues and ways to further enhance the performance of FWOLEDs have been briefly clarified.

Thermally Activated Delayed Fluorescence Materials: Towards Realization of High Efficiency through Strategic Small Molecular Design

Thermally activated delayed fluorescence (TADF) is one of the most intriguing and promising discoveries towards realization of highly-efficient organic light emitting diodes (OLED) utilizing small molecules as emitters. It has the capability of manifesting all excitons generated during the electroluminescent processes, consequently achieving 100 % of internal quantum efficiency. Since the report of the first efficient OLED based on a TADF small molecule in 2012 by Adachi et al., the quest for optimal TADF materials for OLED application has never stopped. Various TADF molecules bearing different design concepts and strategies have been designed and produced, with the aim to boost the overall performances of corresponding OLEDs. In this minireview, the general principles of TADF molecular design based on three basic categories of TADF species: twisted intramolecular charge transfer (TICT), through-space charge transfer (TSCT) and multi-resonance induced TADF (MR-TADF) are discussed in detail. Several key aspects with respect to each category, as well as some effective methods to enhance the efficiency of TADF materials and corresponding OLEDs from the molecular engineering perspectives, are summarized and discussed to exhibit a general landscape of TADF molecular design to a wide variety of scientific researchers within this particular disciplinary area.

Recent Developments in Tandem White Organic Light-Emitting Diodes

Tandem white organic light-emitting diodes (WOLEDs) are promising for the lighting and displays field since their current efficiency, external quantum efficiency and lifetime can be strikingly enhanced compared with single-unit devices. In this invited review, we have firstly described fundamental concepts of tandem device architectures and their use in WOLEDs. Then, we have summarized the state-of-the-art strategies to achieve high-performance tandem WOLEDs in recent years. Specifically, we have highlighted the developments in the four types of tandem WOLEDs (i.e., tandem fluorescent WOLEDs, tandem phosphorescent WOLEDs, tandem thermally activated delayed fluorescent WOLEDs, and tandem hybrid WOLEDs). Furthermore, we have introduced doping-free tandem WOLEDs. In the end, we have given an outlook for the future development of tandem WOLEDs.

Doping-Free White Organic Light-Emitting Diodes

Doping-free white organic light-emitting diodes (WOLEDs) have great potential to the next-generation solid-state lighting and displays due to the excellent properties, such as high efficiency, bright luminance, low power consumption, simplified structure and low cost. In this account, our recent developments on doping-free WOLEDs have been summarized. Firstly, fundamental concepts of doping-free WOLEDs have been described. Then, the effective strategies to develop doping-free WOLEDs have been presented. Particularly, the manipulation of charges and excitons distribution in different kinds of doping-free WOLEDs have been highlighted, including doping-free fluorescent/phosphorescent hybrid WOLEDs, doping-free thermally activated delayed fluorescent WOLEDs and doping-free phosphorescent WOLEDs. In the end, an outlook for the future development of doping-free WOLEDs have been clarified.

Recent Advances of Exciplex-Based White Organic Light-Emitting Diodes

Recently, exciplexes have been actively investigated in white organic light-emitting diodes (WOLEDs), since they can be effectively functioned as (i) fluorescent or thermally activated delayed fluorescent (TADF) emitters; (ii) the hosts of fluorescent, phosphorescent and TADF dopants. By virtue of the unique advantages of exciplexes, high-performance exciplex-based WOLEDs can be achieved. In this invited review, we have firstly described fundamental concepts of exciplexes and their use in organic light-emitting diodes (OLEDs). Then, we have concluded the primary strategies to develop exciplex-based WOLEDs. Specifically, we have emphasized the representative WOLEDs using exciplex emitters or hosts. In the end, we have given an outlook for the future development of exciplex-based WOLEDs.

High-Performance Fluorescent Organic Light-Emitting Diodes Utilizing an Asymmetric Anthracene Derivative as an Electron-Transporting Material

Fluorescent organic light-emitting diodes with thermally activated delayed fluorescent sensitizers (TSF-OLEDs) have aroused wide attention, the power efficiencies of which, however, are limited by the mutual exclusion of high electron-transport mobility and large triplet energy of electron-transporting materials (ETMs). Here, an asymmetric anthracene derivative with electronic properties manipulated by different side groups is developed as an ETM to promote TSF-OLED performances. Multiple intermolecular interactions are observed, leading to a kind of "cable-like packing" in the crystal and favoring the simultaneous realization of high electron-transporting mobility and good exciton-confinement ability, albeit the low triplet energy of the ETM. The optimized TSF-OLEDs exhibit a record-high maximum external quantum efficiency/power efficiency of 24.6%/76.0 lm W^-1 , which remain 23.8%/69.0 lm W^-1 at a high luminance of even 5000 cd m^-2 with an extremely low operation voltage of 3.14 V. This work opens a new paradigm for designing ETMs and also paves the way toward practical application of TSF-OLEDs.

Appending triphenyltriazine to 1,10-phenanthroline: a robust electron-transport material for stable organic light-emitting diodes

There has been an increasing demand for high-performance and cost-effective organic electron-transport materials for organic light-emitting diodes (OLEDs). In this contribution, we present a simple compound 3-(3-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-1,10-phenanthroline through the facile Pd-catalyzed coupling of a triphenyltriazine boronic ester with 3-bromo-1,10-phenanthroline. It shows a high T_g of 112 °C. The ultraviolet photoelectron spectroscopy measurements reveal a deep HOMO level of -6.5 eV. The LUMO level is derived as -3.0 eV, based on the optical bandgap. The low-temperature solid-state phosphorescent spectrum gives a triplet energy of ∼2.36 eV. n-Doping with 8-hydroxyquinolatolithium (Liq, 1:1) leads to considerably improved electron mobility of 5.2 × 10^-6-5.8 × 10^-5 cm² V^-1 s^-1 at E = (2-5) × 10⁵ V cm^-1, in contrast with the triarylphosphine oxide-phenantroline molecular conjugate we reported previously. It has been shown that through optimizing the device structure and hence suppressing polaron-exciton annihilation, introducing this single Liq-doped electron-transport layer could offer high-efficiency and stable phosphorescent OLEDs.

Strategies to Achieve High-Performance White Organic Light-Emitting Diodes

As one of the most promising technologies for next-generation lighting and displays, white organic light-emitting diodes (WOLEDs) have received enormous worldwide interest due to their outstanding properties, including high efficiency, bright luminance, wide viewing angle, fast switching, lower power consumption, ultralight and ultrathin characteristics, and flexibility. In this invited review, the main parameters which are used to characterize the performance of WOLEDs are introduced. Subsequently, the state-of-the-art strategies to achieve high-performance WOLEDs in recent years are summarized. Specifically, the manipulation of charges and excitons distribution in the four types of WOLEDs (fluorescent WOLEDs, phosphorescent WOLEDs, thermally activated delayed fluorescent WOLEDs, and fluorescent/phosphorescent hybrid WOLEDs) are comprehensively highlighted. Moreover, doping-free WOLEDs are described. Finally, issues and ways to further enhance the performance of WOLEDs are briefly clarified.

High-Performance Doping-Free Hybrid White OLEDs Based on Blue Aggregation-Induced Emission Luminogens

Doping-free white organic light-emitting diodes (DF-WOLEDs) have aroused research interest because of their simple properties. However, to achieve doping-free hybrid WOLEDs (DFH-WOLEDs), avoiding aggregation-caused quenching is challenging. Herein, blue luminogens with aggregation-induced emission (AIE) characteristics, for the first time, have been demonstrated to develop DFH-WOLEDs. Unlike previous DFH-WOLEDs, both thin (<1 nm) and thick (>10 nm) AIE luminogen (AIEgen) can be used for devices, enhancing the flexibility. Two-color devices show (i) pure-white emission, (ii) high CRI (85), and (iii) high efficiency. Particularly, 19.0 lm W^1- is the highest for pure-white DF-WOLEDs, while 35.0 lm W^1- is the best for two-color hybrid WOLEDs with CRI ≥ 80. A three-color DFH-WOLED shows broad color-correlated temperature span (2301-11628 K), (i) the first sunlight-like OLED (2500-8000 K) operating at low voltages, (ii) the broadest span among sunlight-like OLED, and (iii) possesses comparable efficiency with the best doping counterpart. Another three-color DFH-WOLED exhibits CRI > 90 at ≥3000 cd m^-2, (i) the first DF-WOLED with CRI ≥ 90 at high luminances, and (ii) the CRI (92.8) is not only the highest among AIE-based WOLEDs but also the highest among DF-WOLEDs. Such findings may unlock an alternative concept to develop DFH-WOLEDs.

Sterically Shielded Electron Transporting Material with Nearly 100% Internal Quantum Efficiency and Long Lifetime for Thermally Activated Delayed Fluorescent and Phosphorescent OLEDs

A high triplet energy (T₁) is usually taken as the prerequisite of the good exciton confinement of electron transporting materials (ETMs); however, there is usually a tradeoff with large mobility and stability. Here, we demonstrated that good exciton confinement can also be realized utilizing a low-T₁ ETM with a sterically shielding low-T₁ unit. Given the short-range interaction of the Dexter energy transfer, the large steric side groups of the low-T₁ ETM can effectively hinder the T₁ of the emitters from being quenched by increasing the intermolecular distance. Based on this concept, a maximum external quantum efficiency (EQE_max) as high as 21.3% was observed in the sky-blue thermally activated delayed fluorescence device using a low-T₁ ETM, with the EQE remaining at 21.2% at 1000 cd/m² and 17.8% at 5000 cd/m². Further, an EQE_max as high as 25.5%, a low turn-on voltage of 2.3 V, as well as a long T₉₀ of over 400 h at an initial luminance of 5000 cd/m² were achieved for green phosphorescent devices. This work highlights a viable strategy for developing high-performance ETMs, paving their way toward practical applications.